All Products

£ 500.00 (ex. VAT) 1 in stock

Job lot of 14 x Black Lab Stools/Chairs

ITEM-49574

Job Lot of 14 x Black Lab Stools/Chairs – Used

This lot of items was removed from a university laboratory where they were surplus to requirements.

The lot includes 14 lab stools/chairs of various sizes and patterns.

1 x Round stool

4 x Stools with castors

The remaining stools are standard fixed-leg types.

All units are in good used condition, showing general signs of wear from normal use. No structural damage has been observed.

£ 500.00 (ex. VAT) 1 in stock

Jun-Air Model 3 Air Compressor

ITEM-50039

Jun-Air Model 3 Air Compressor Lab

This item was removed from a university laboratory where it was surplus to requirement.

The unit is in good cosmetic condition and powers on; however, we are unable to test it further at our facility.

Both pressure gauges function as they should.

A service is recommended prior to use.

£ 500.00 (ex. VAT) 1 in stock

Magnetron Sputter Banking Plate 10 inch

ITEM-47782

Magnetron Sputter Banking Plate 10 Inch

This item was removed from a facility where it was surplus to requirements.

The plate features both rubber O-rings, which are in good condition.

£ 500.00 (ex. VAT) 1 in stock

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

ITEM-47154

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Walker All In One Fumigation Units Lab

ITEM-46390

Job Lot of 6 x Walker All In One Fumigation Units Lab

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included is the following:

6 x Walker All In One Fumigation Units

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

ITEM-42462

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

This job lot of items comes from a university laboratory. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs, as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Included in the lot:

6 x Lafert Type: ST63C4 Motors with Air Blowing Impellers
Further Information from Data Plate:
IEC60038 3~Mot.
Th.Cl.F IP55.
50Hz: 230/400V 0.13kW 0.87/0.50A.
60Hz: 254/440V 0.15kW 0.87/0.50A.
1360/1630min-1 cos 0.64/0.64.
Protector Type PT0 150°C.
Individual Dimensions: L 53cm x W 25cm x H 25cm, 4.6Kg each.
Shaft Length: 30cm.
Fan Dimensions: 25cm x 25cm.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

INDENTEC Hardness Testing Machine 5030SKV Lab Spares/Repairs

ITEM-34831

INDENTEC Hardness Testing Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use.

It is listed as Spares/Repair.

Also included:

Calibration Certificate

User Manual

Optic Head

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

ITEM-48683

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, unable to test due to the power supply not being included.

Therefore, it is listed as Spares/Repair.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Lot of 19 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

ITEM-43125

Lot of 19 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

This lot of items was removed from a university where they were surplus to requirement.

Included are 19 Brand New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101.

1 of the boxes was opened to photograph the contents.

Vesa mounting interface 100 x 100mm and 70 x 70mm
Max load 1.1 Kg
Articulating arm with adjustable height, rotating, pan and tilt
Desk clamp mount and grommet mount.
Full instruction and assembly leaflet
Assembly Tools

£ 500.00 (ex. VAT) 1 in stock

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

ITEM-50643

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

ITEM-46517

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it did not drop in temperature.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge 5810 R w/ Eppendorf A-4-81 Rotor Spares/Repair Lab

ITEM-47794

Eppendorf 5810 R Refrigerated Centrifuge - Spares or Repair

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition but does not power on, likely due to a suspected motherboard fault. Therefore, it is being sold as Spares or Repair.

Includes:

4 x Swinging Buckets (Eppendorf 09/04 – Max Load 780g)
8 x Sample Holders (5-hole, 3cm diameter)
4 x Sample Holders (1-hole, 6cm diameter)
1 x Sample Holder (12-hole, 2cm diameter)

£ 500.00 (ex. VAT) 1 in stock

Dionex GP50 Gradient Pump w/ Accessories Lab

ITEM-48617

Dionex GP50 Gradient Pump with Accessories

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition and powers on.

The screen remains slightly dark on the left side when powered on and the front door is broken and does not fit correctly.

Includes:

Dionex GP50
4x Schott-Duran 1000 ml bottles with stoppers adapted for pump tubes
2x Dionex bottle carriers (one fitted with a pressure gauge)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Bright Instrument SC12CL 5030 Microtome Cryostat Spares/Repair

ITEM-48821

Bright Instrument SC12CL 5030 Microtome Cryostat – Spares/Repair

This item was removed from a university where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however, during temperature testing the system did not begin cooling.

Therefore, it is listed as Spares/Repair.

Model: SC12CL 5030

£ 500.00 (ex. VAT) 1 in stock

Olympus CK Inverted Microscope w/ Olympus OM 2 Camera & Mount

ITEM-50881

Olympus CK Inverted Microscope w/ Olympus OM 2 Camera & Mount

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

Objectives

Olympus PL10 0.25 437824
Olympus 10 0.25 261421

Olympus OM 2 Camera & Mounting Kit

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Mobile Centrifuge Table Model 5821

ITEM-51293

Eppendorf Mobile Centrifuge Table Model 5821

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition.

Dimensions;

External length (cm) 70
External width (cm) 64
External height (cm) 47

It is compatible with following centrifuge:

5810, 5810R, 5804 & 5804 R

£ 500.00 (ex. VAT) 1 in stock

ELGA Option R15 Water Purifier Model OR015BPM1 2020

ITEM-51520

ELGA Option R15 Water Purifier Model OR015BPM1 2020

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Last Service: 18/03/2025

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Objet Eden 260V 3D Printer Spares/Repair

ITEM-51597

Objet Eden 260V 3D Printer Spares/Repair

This system was removed from a facility where it was surplus to requirements.

The unit powers on.

The previous owner advised that the system has a software issue, which prevents full operation and flushing of materials. The unit has been used with photo-cure resin, and while it has been cleaned externally, complete internal decontamination was not possible due to the software limitation.

The material cartridges and waste containers have been removed, and connections have been blocked off. Surfaces have been thoroughly cleaned, so casual contact should not result in exposure to residual material.

Due to the software issue and partial decontamination, the system is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Applied Biosystems ViiA 7 Real-Time PCR System Spares/Repair

ITEM-53914

Applied Biosystems ViiA 7 Real-Time PCR System Spares/Repair

This system was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition with typical signs of previous laboratory use. It powers on and a self-diagnostic test was performed.

The system passed all checks except the block mover test.

A note previously attached to the unit (dated 12/11/25) states: “Block mover damaged.”

Due to this fault, the system is being sold for spares or repair.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 13 x Various Wall Mounted X-Ray Light Boxes

ITEM-50137

Job Lot of 13 x Various Wall Mounted X-Ray Light Boxes

This job lot was removed from a university where it was surplus to requirement.

All the included light boxes are in good cosmetic condition and in good working order.

Individual Dimensions;

Dimension Set (L × W × H)

10: 75 × 12 × 55 cm

3: 73 × 12 × 50 cm

£ 500.00 (ex. VAT) 1 in stock

Wild Heerbrugg M40A Inverted Microscope 4/0.10, 10/0.25 Ph, 20/0.25 Ph, 40/0.25

ITEM-36616

Wild Heerbrugg M40A Inverted Microscope

This microscope was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition. It powers up and is in good working order (PSU not included) - we used a WILD PS from another item of stock.

Objectives:

1x Wild Heerbrugg 4/0.10

1x Wild Heerbrugg 10/0.25 Ph

1x Wild Heerbrugg 20/0.25 Ph

1x Wild Heerbrugg 40/0.25 Ph d=0.17

£ 500.00 (ex. VAT) 1 in stock

Mutek Infrared Laser System - TLS 150, 0LS150, KMPV50-0.5-J2 Lab

ITEM-37859

Mutek Infrared Laser System - TLS 150, 0LS150, KMPV50-0.5-J2 Lab

The lab confirmed that the system has not been used for 10 years but was working prior to being put away into storage.

Mutek Infrared Laser System

The Item Powers on and is in Good Condition with Some Wear

Model - 0LS150

Mutek Infrared TLS 150

Model - TLS 150

Kolmar Technologies Infrared Detector

Model - KMPV50-0.5-J2

Kolmar Technologies Infrared Detector PSU

Has no Information Plate

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter TQ-Prep Workstation Model 2428 Lab

ITEM-38326

This Beckman Coulter TQ-Prep Model 2428 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has some minor marks from use.

It powers up, but we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

DakoCytomation Diode Lyt 200-S Laser Head w/ Controller & Fan/Cooler Lab

ITEM-41212

DakoCytomation Diode Lyt 200-S Laser Head w/ Controller & Fan/Cooler

This was removed from a working MoFlo system. It was surplus to requirements.

The unit powers up but has not been tested further due to safety restrictions around lasers at our site.

It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

Nanoentek ADAM-MC Automatic Cell Counter with Keypad Lab

ITEM-36868

Nanoentek ADAM-MC Automatic Cell Counter with Keypad

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test to further at our facility.

It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

Maternity Birthing Simulator Cervix Examination - Limbs & Things - Adam Rouilly

ITEM-38859

Maternity Birthing Simulator Cervix Examination - Limbs & Things - Adam Rouilly

They are in generally good cosmetic condition but some of the latex items have torn.

2 X Cervix Examination Set - ESP ( Only the 1 Unit to use them with However)

2 X Birthing Simulator with removable Bumps - Adam Rouilly

2 X Prompt Birthing Trainer - Limb & Things

2 X Basic Obstetric Models - no Branding

2 X Babies with detachable Placenta

1 X Anatomically Correct Baby (Very heavy and sounds like it has liquids inside)

1 X Childbirth Graphics Baby doll with realistic head

1 X Peritoneal Lavage Trainer - Limbs & Things

2 X Quick Setup Guide laminated Posters

£ 500.00 (ex. VAT) 1 in stock

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System Lab

ITEM-31219

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System

This system was removed from a laboratory where it was surplus to requirements.

Both units power up and are in good cosmetic condition with marks from use.

It comes with 8 x Trays (53.5 x 16cm). One tray has been labelled as 'Not moving'

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC 5C Plus RC-5C+ Centrifuge Lab

ITEM-37328

Sorvall RC 5C Plus Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on.

However, during testing, the item produced the following code: Error Code 4 - indicating a 'Drive system failure'.

Which prevented further testing from being conducted.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leica SP5 Confocoal Laser w/ NEC Monitors For Parts Lab

ITEM-41643

Leica SP5 and HP Z620 Workstation System with NEC Monitors - For Parts or Repair

This system was removed from a university lab where it was surplus to requirements.

The setup primarily consists of components from a Leica SP5 system but is currently non-operational and intended for spares or repairs.

This collection of equipment is in need of significant repairs, especially the electrical connections, as noted from the site that "Electrics are bust."

Included Equipment;

NEC MultiSync LCD 1990SXi Monitors (2 units): Dual monitors that are part of the system.

HP Z620 Workstation PC Tower: Includes a keyboard and mouse but does not have HDDs. It retains PCi cards for the Leica system.

Leica SP5 Unit: The operational condition is uncertain. It suffers from severe damage to the umbilical cable, with various wires cut, which affects its functionality.

Leica Microsystems CMS TCS SP5 Control Table: Comes with a table, but similar to the SP5 unit, it has umbilical cables that have been severed.

Leica Exhaust Unit: Forms part of the ventilation system for the Leica SP5.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wyatt MALS System Optilab REX/DAWN Helios/Eclipse 2 Seperation System Faulty Lab

ITEM-46153

Wyatt MALS System Optilab REX/DAWN Helios/Eclipse 2 Separation System

This system was removed from a university laboratory where it was surplus to requirements.

Each unit powers on, however, there are reported faults across the components:

The Optilab REX's screen powers on, but the computer component has failed.
The DAWN Helios powers on audibly, but the screen does not display.
The Eclipse 2 Separation System powers on, but the functionality of the valves could not be tested and is assumed non-functional based on client feedback.

Despite the operational issues, all items are in good cosmetic condition.

System Components:

Optilab REX
Model: WREX-09
Serial No: 652-REX
DAWN Helios
Model: WH-03
Serial No: 363-H
Eclipse 2 Separation System
Serial No: 0293

Please note: This system will no longer be covered by Wyatt for servicing.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Mini Spray Dryer B-290 Lab Spares/Repairs

ITEM-37142

Buchi Mini Spray Dryer B-290

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. The display isn't clear, but it looks to be showing "error 04".

The display then stopped showing any numbers or any sign of power. the ON/OFF switch still showed power. All buttons did not appear to be responsive.

The Peristaltic pump did not move or appear to show any sign of power. The pump at the back of the unit did not show signs of power or make a noise either.

Trolley included.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Renishaw Raman Confocal System Parts Lab Spares/Repairs

ITEM-37159

Renishaw Raman Confocal System Parts Lab

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

Included are the following;

1x Renishaw Raman unit

1x Renishaw SYS100 Unit:

Model SYS100

1x Renishaw Laser unit:

Model FOP

1x Renishaw Laser unit:

Model FOP7-514

2x Spectra-Physics Laser Heads:

Model no. 160-C4210

1x Laser Head Power Cable:

1x Interlock Overide Cable B

2x Spectra-Physics Laser Power Supplies:

Model no. 263-C03 714792R-did not power on. - (with enable key).

Model no. 263-C04 - powers on. - (no enable Key).

2x Power Supply Cables

2x Spectra-Physics Remote

Model 361C

1x YC-05II Video Camera

Objectives:

1x RED- Unbranded 4/ 0.10 160/0.17

1x BLUE- Unbranded 40/ 0.65 160/0.17

1x GREEN- Olympus SLMPlan 20X /0.35 ∞ / 0

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Cambridge Stereoscan 200 SEM Scanning Electron Microscope Lab

ITEM-40007

Cambridge Stereoscan 200 SEM Scanning Electron Microscope

This system was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

This item has not been powered on or tested further, therefore it is listed as Spares/Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

2x Enraf Nonius FR 590 X-Ray System Lab Spares/Repairs

ITEM-41311

2 x Enraf Nonius FR 590 X-Ray System Lab

These items were removed from a university where they were surplus to requirement.

Both systems are in good cosmetic condition, due to the nature of the item we are unable to power on or test further at our facility.

There are no known faults with the system, but we assume that it will require some degree of recommissioning before it can be used again. For this reason it is sold for spares/repairs.

Includes:

-2x Tran-017 Micro T,65W,CNT,RS,Euro

S/N-SB966555

S/N-9619060416

-2x Nonius Mach 3

Type-540.309

S/N-20-05

-CEM-09A-ii CRT Video Monitor

Model-MM-9A

S/N-CG803151R

MFG Year- August 2006

-CD-RW Drive

Model- SOHR-5238S

S/N-408438003675

-Oxford Diffraction Control Computer

Model- ACP-2000

S/N-KMA0242954

-ACI Computers Tower

Model-Creative

S/N-N/A

-ASTEC MVP Series Power Supply

Model-MP6-2U-1Q-1Q-1R-03

S/N-0616E271

Max Output Power- 600/800 WATTS

-Dell Monitor

Model-P190St

S/N-CN-0CHRYK-74445-086-C30S

-HP Proliant DL140

S/N-GB8815J034

Model-0 CT Chassis DL140G3

-Nonius KappaCCD

Model-ST-138S D12992033

S/N-7152.P1-7055-38.57831

-ENRAF NONIUS

Type-1590-830

S/N-05-18

-2x Julabo FL601 Chiller (Powered on message comes up E01)

Model-FL601

S/N-00274753

S/N-00250168

-Apogee 5500 Series Radiation Shielded X-Ray Tube

Target Material-Cu

S/N-93510

-Empyrean tube PANalytical

NC9430 033 73105

No. DK 429266. W1800

-Micro x-ray inc

X-ray tube

P/N-18068

S/N03496

Target Material-Cu

Manufacture Year- 5/8/19

Software:

-Mercury 3.10.3

£ 500.00 (ex. VAT) 1 in stock

Syngene G-Box F3 Gel Imaging System With Mitsubishi P93D Printer

ITEM-35866

Syngene G-Box F3 Gel Imaging System

This was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test it further without connection to a PC. The Transilluminator is missing a few bulbs but is working.

It is in reasonable cosmetic condition but has heavy staining inside.

Included are;

Includes:

-Mitsubishi P93D Printer

-Digital Monochrome Printer Driver Disc Version 1.2

Printer is functional

Model- G-Box F3

Serial number- DR4V2/2703

Model- P93DW

Serial number- 6011497

£ 500.00 (ex. VAT) 1 in stock

Quattroflow Fluid Systems 1200 Quaternary Diaphragm Pump QF 1200-SU Lab

ITEM-35886

Quattroflow Fluid Systems 1200 Quaternary Diaphragm Pump QF 1200-SU

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order.

It is in good cosmetic condition with minor marks.

12cm Diaphragm

2200 RPM

Model- Quattroflow CV

Serial number- 673786

£ 500.00 (ex. VAT) 1 in stock

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

ITEM-35931

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

Max RPM-1800

Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes.

Centrifuge model number- VR maxi-1

Centrifuge serial number- 804040235

Freeze dryer model number- CT/DW 110

Freeze dryer serial number- 804050097

Maxi dry model number- MAXI-DRY PLUS

Maxi dry serial number- 804060037

£ 500.00 (ex. VAT) 1 in stock

C.B.S Scientific Optimizer PCR Workstation Lab

ITEM-36000

C.B.S Scientific Optimizer PCR Workstation

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Includes:

-GE fluorescent light

-GE Germicidal lamp

£ 500.00 (ex. VAT) 1 in stock

Pfeiffer Turbo-V 301 Navigator Model#: 9698918S003 Turbomolecular Pump Lab

ITEM-36199

Pfeiffer Turbo-V 301 Navigator Model#: 9698918S003 Turbomolecular Pump Lab

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Z1 Particle Counter with Controller Lab

ITEM-36433

Beckman Coulter Z1 Particle Counter with Controller

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

it is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

FLUIDX X-seal HT124S Variable Temperature Thermal Sealer Lab

ITEM-36488

FLUIDX X-seal HT124S Variable Temperature Thermal Sealer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

FLUIDX X-seal Thermal Sealer

Model: Xseal HT124S

Serial#: 41135

£ 500.00 (ex. VAT) 1 in stock

Rousselet Robatel Decanting Centrifuge DRC 60 VX AY 1Sman

ITEM-36655

Rousselet Robatel DRC 60 VX AY 1Sman Decanting Centrifuge

This was removed from a laboratory where it was surplus to requirements.

The system has not been tested as it has been disassembled to some degree.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

13 x Trays Agilent 70ul Wide Bore Conductive Rack 0.2 Case - 10 Racks

ITEM-36762

13 x Trays Agilent 70ul Wide Bore Conductive Rack 0.2 Case - 10 Racks

These items were removed from a university where they were surplus to requirement.

All are brand new in their original packaging.

Each pack contains 10 Racks.

£ 500.00 (ex. VAT) 1 in stock

Ingeny PhorLI IPU-S Vertical Electrophoresis System

ITEM-37755

INGENYphorU IPU-S Vertical Electrophoresis System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

The unit is watertight and the valve is working.

Also included:

FisherBrand HU13

FisherBrand HU6

INGENY phorLI

Deca Probe Series

Invitrogen Novex Mini-Cell

£ 500.00 (ex. VAT) 1 in stock

Vacuubrand Vakuum-Pump system BVC 81 VNC 1 Lab

ITEM-41234

Vacuubrand Vakuum-Pump system BVC 81

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs. The tube connecting the pump to the bottle has been snapped off, allowing all the air to escape before it converts into the bottle. This tubing will need to be replaced but is a consumable.

Unable to test further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Carl Zeiss MCS 500 System & Multiplexer Lab

ITEM-39717

Carl Zeiss MCS 500 System & Multiplexer

These units were removed from a university lab where they were surplus to requirements.

Everything powers up and the lab confirmed it was in working order when last used.

Included are;

Carl Zeiss MCS 500 System Spektrometer BLX500-4 + MCS 522 UV-VIS

Model: MCS 500

Serial#: 028989

Carl Zeiss Multiplexer

Model: Multiplexer

Serial#: 021166

Carl Zeiss Enclosure

Model: Double Ch.Syst.

Serial#: 029050

RS-LINK 1.2

Serial#: 1806-1009

PSM-V24/FO-G/S (Qty. 2)

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer LS50B Luminescence Spectrometer Lab

ITEM-38260

This Perkin Elmer LS50B Luminescence Spectrometer was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further at our facility.

It is in good cosmetic condition, with minor marks from use.

The sample plate is not included.

Further testing is not possible without the necessary PC and Software.

£ 500.00 (ex. VAT) 1 in stock

Dionex UVD 340S UV/VIS Detector Lab

ITEM-38364

Dionex UVD 340S UV/VIS Detector

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition but is missing a rear foot.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

11 x Packs Various Thermo Scientific Nalgene Coex Polyethylene Film Tank Liners

ITEM-38725

These were removed from a working lab where they were surplus to requirements.

Included are;

Nalgene™ Coex Polyethylene Film Tank Liners x 2

Catalog number: 343050-0005

Description: Gamma Irradiated: 5 gal. (19L)

Material: Polyethylene

Capacity (English) 5 gal.

For Use With (Equipment) Nalgene cylindrical tanks from 5 gal (19L) to 200

No. per Pack 10

Nalgene™ Coex Polyethylene Film Tank Liners x 5

Catalog number: 343050-0030

Description: Gamma Irradiated: 30 gal. (113L)

Material: Polyethylene

Capacity (English) 30 gal.

For Use With (Equipment) Nalgene cylindrical tanks from 5 gal (19L) to 200

No. per Pack 10

Nalgene™ Coex Polyethylene Film Tank Liners x 3

Catalog number: 343050-0007

Description: Gamma Irradiated: 7.5 gal. (28L)

Material: Polyethylene

Capacity (English) 7.5 gal.

For Use With (Equipment) Nalgene cylindrical tanks from 5 gal (19L) to 200

No. per Pack 10

Nalgene™ Coex Polyethylene Film Tank Liners x 1

Catalog number: 343050-0015

Description: Gamma Irradiated: 15 gal. (57L)

Material: Polyethylene

Capacity (English) 15 gal.

For Use With (Equipment) Nalgene cylindrical tanks from 5 gal (19L) to 200

No. per Pack 8

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer 7400816 DC Motor Control Unit Lab

ITEM-50317

PerkinElmer 7400816 DC Motor Control Unit

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and powers on. Please note, the power switch lamp is broken.

No further testing has been carried out at our facility.

Included Components:

PerkinElmer 7400816 DC Motor Control Unit

All Products

Filters