All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5510E Incubator Lab Spares/Repairs

ITEM-46172

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

ITEM-37320

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Allegra X-22R Benchtop Centrifuge Spares/Repair Lab

ITEM-47198

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.

Therefore, this item is being sold strictly as Spares/Repair.

Includes:

Beckman Allegra X-22R unit only (no rotor or accessories included)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-28S Floor-Standing Centrifuge Spares/Repair Lab

ITEM-46923

Sorvall RC 28S Floor-Standing Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, testing could not be completed due to an on-screen error that prevented further operation, and prevented a vacuum from being drawn.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Piezorray Flexible Non-contact Microarraying System Spares/Repair

ITEM-45182

Perkin Elmer Piezorray Flexible Non-contact Microarraying System Spares/Repair

This system was removed from a university laboratory where it was surplus to requirements.

The Piezorray system powers up but encounters a software error indicating a problem with the device drivers or compatibility issues when connected to the PC.

The error prevents further use and testing of the system.

Therefore, it is listed as Spares/Repair.

The system comprises the following:

1 x Perkin Elmer Piezorray main unit
1 x Enclosure, seemingly custom for the Piezorray
1 x Perkin Elmer Precisely Unit
1 x Non-branded blue and white unit
1 x Cole Parmer Air Admiral Pump
1 x Elga PURELAB UHQ
1 x Cole Parmer Programmable Polystat Chiller
1 x StockerYale IMAGELITE MODEL 20 light source with Lightpipe
1 x Dell Optiplex 280 PC with Windows XP OS, Perkin Elmer Piezorray software, and National Instruments Measurement & Automation software, including keyboard, mouse, and monitor

Includes:

3 x Tecan 731070 Syringes (used)
2 x Spare temperature-controlled microplate holders
5 x ADKH501-4PK Test Record Autodrop Pipettes (new)
Various spare tubing

Note: Tables are not included in the sale.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

CI Electronics Sade P2 Checkweigher Weight Sorter Spares/Repair

ITEM-46233

C1 Electronics Sade-P2 Automatic Tablet CheckWeigher

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but displays a “Zero Failure” message immediately upon startup, accompanied by an alarm. This message cannot be cleared, and the unit cannot proceed to operation.

Therefore, it is listed as Spares/Repair.

It is in reasonably good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eurotherm Process Automation System with TCS Tactician T1000 & Components

ITEM-24653

Eurotherm Process Automation System with TCS Tactician T1000 & Components

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit.

We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Dynamic Gastric Model (DGM) Custom Made Model Lab Spares/Repairs

ITEM-46358

Dynamic Gastric Custom Made Model

This item was removed from a university lab where it was surplus to requirements.

This custom-made Dynamic Gastric Model exhibits poor cosmetic condition. It cannot be powered on or tested due to a visual PAT failure and exposed wiring.

The Dynamic Gastric Model (DGM) is a bench-top computer controlled in vitro system that simulates digestion in the human stomach. DGM allows accurate prediction and understanding of the behaviour of foods or drug preparations within the human gut during digestion in real time.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Brema Laboratory Ice Flaker Machine Model - GB 1555 A Spares/Repair Lab

ITEM-28134

Brema Laboratory Ice Flaker Machine Model GB 1555 A

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition. However, it is leaking water due to a broken junction in the overflow-to-waste pipe.

As a result, it is listed as spares or repair.

Please note: This item was previously used in a laboratory setting and is not suitable for use in commercial catering. It should be used for laboratory purposes only.

Includes:

Operating manual

Internal dimensions: D46.5 × W67.5 × H57 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Typhoon Trio+ Variable Mode Imager Spares/Repair Lab

ITEM-37335

Typhoon Trio+ Variable Mode Imager

This item was removed from a university lab where it was surplus to requirement.

It has not been tested due to exposed wiring, and is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Aeromatic Fielder MP-Micro Fluid Bed Dryer Spares/Repair Lab

ITEM-39838

Aeromatic Fielder MP-Micro Fluid Bed Dryer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on.

Therefore, we are unable to test it further at our facility, and it's listed as Spares/Repair.

The item also contains various Assembling Dryer/ Top Sprayer Containers and cables, as seen at the end of the slide.

Specifications;

Model: MP-MICRO
Serial#: 04012
Date: FEB 04

£ 500.00 (ex. VAT) 1 in stock

Synbiosis aCOLyte 3 Colony Counter 8000/SYN Lab

ITEM-35291

This Synbiosis aCOLyte 3 Colony Counter was removed from a university lab where it was surplus to requirements.

This unit powers up with a 12V DC power adapter (not included). The device runs through the 3 different start-up stages but has not been tested further.

It is in good cosmetic condition with marks from use.

£ 500.00 (ex. VAT) 1 in stock

Windley Bros Heavy Duty Isolation Anti Vibration Table

ITEM-42830

Windley Bros Heavy Duty Isolation Anti Vibration Table

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with surface rust present. We are unable to test it at our facility.

This anti-vibration table is constructed from cast iron and steel. The frame comprises angle iron legs with steel bar bracing, supporting a cast iron base.

Working height: 93cm.

Solid steel tabletop: 102 x 76 x 1.2cm

£ 500.00 (ex. VAT) 1 in stock

Wykeham Farrance Oedometer CBR Testing Lab

ITEM-34568

This Wykeham Farrance Oedometer CBR Testing was removed from a university lab where it was surplus to requirements.

The unit powers up the hand control unit works correctly, and the hydraulic ram goes up and down freely.

It is in reasonable cosmetic condition with marks from use.

£ 500.00 (ex. VAT) 1 in stock

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

ITEM-46200

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

Jouan S40 Swing-Out Rotor w/ 4 x Buckets & Inserts.
Max Load: 2kg
Max RPM: 4300

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40991

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40992

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

£ POA 1 in stock

VG Scientific Wien Mass Filter for Ion Beam Filtering UHV Lab

ITEM-19542

This item is new in stock. Please enquire for further details.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Xenogen Ivis 100 Imaging System Microscope - XGI-8, XRH-2 Lab

ITEM-29746

Xenogen Ivis 100 Imaging System Microscope - XGI-8, XRH-2 Lab

This system was removed from a university lab where it was surplus to requirements.

We have powered everything up and the system is in good cosmetic condition with marks from use.

The lab informed us that it has not been used for several years but was in working order when last used. The calibrated light source has now been removed so we are now selling for spares/repairs.

Included as part of the Ivis 100 are;

1 x IGC Polycold Systems Inc, Cryotiger Compressor.

1 x Spectral Instruments Inc, 600 Series CCD Camera Controller.

1 x Spectral Instruments Inc, Refrigeration Line Heater.

1 x Xenogen Corporation, XGI-8 gas Anesthesia System.

1 x DELL PC & Monitor, Running Windows 2000 Professional.

Instruction Manuals & Xenogen Living Image Version 2.20 Discs included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5810R BenchTop Centrifuge Spares/Repair Lab

ITEM-46918

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

£ 500.00 (ex. VAT) 1 in stock

VWR PCR Plate Centrifuge II Lab

ITEM-49516

VWR PCR Plate Centrifuge II Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 500.00 (ex. VAT) 1 in stock

Ohaus Frontier Micro Centrifuge FC5513 Lab

ITEM-49518

Ohaus Frontier Micro Centrifuge FC5513 Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 500.00 (ex. VAT) 1 in stock

Grant FH15 Flow Heater and FC20 Flow Cooler Lab

ITEM-42784

Grant FH15 Flow Heater and FC20 Flow Cooler

This system was removed from a university laboratory where it was surplus to requirements.

The FH15 Flow Heater powered on with the pump running. The heater light illuminated when the set temperature was increased above ambient.

The FC20 Flow Cooler powered on, and both the compressor and fan could be heard operating.

These units do not include a built-in tank and require an external header tank to function as part of a complete system. Due to this, full-range temperature testing was not performed.

It is in good cosmetic condition.

Includes:

Grant FH15 Flow Heater (Serial No. 72311)
Grant FC20 Flow Cooler (Serial No. 72311)

Model: FH15 / FC20
Serial No.: 72311

£ 500.00 (ex. VAT) 1 in stock

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E No Blade

ITEM-42796

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, powers on and is in good mechanical order. We are unable to test it further at our facility.

Please note; There is no blade present on the cutting arm.

£ 500.00 (ex. VAT) 1 in stock

VWR LA 214 Laboratory Balance

ITEM-49530

VWR LA 214 Laboratory Balance

This item is sold on behalf of a client where it is surplus to requirements.

This item has a max capacity of 220 g with a readability of 4 decimal places. It was serviced: 05/09/2024.

It is in perfectly good condition and working order, with no significant cosmetic defects. The balance was in use in an industry laboratory up until June 2025 and was removed during a lab shutdown.

The item comes with the power cable.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Agilent 2100 G2939A Bioanalyzer System & DNA Chips Spares/Repair Lab

ITEM-48419

Agilent 2100 G2939A Bioanalyzer System & Accessories Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however it could not be fully tested as two channels show high leakage currents.

Therefore, it is being sold as spares or repair.

Includes:

1 box x High Sensitivity DNA Chips (5 in box) – expires Jan 2026
1 box x High Sensitivity DNA Chips (10 in box) – expires Jan 2026
1 box x Electrode Cleaners (5 in box)
1 box x Chip Priming Station
1 x Bayonet Electrode Cartridge (in blue case)
1 box x 11 Syringe Kits
1 box containing Test Chip Kit/Electrode/Diode Test Chip & USB 2.0 Cable

Model: 2100 Bioanalyzer

Serial No.: DE13805731

Product No.: G2938C

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller Spares/Repair Lab

ITEM-47102

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition; however, it cannot be powered on due to the absence of a plug and a split in the flex exposing the internal wires.

It is therefore sold as spares or repair.

Includes:

Carl Zeiss Surgical Microscope
Metz NAG 80 VA Controller

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs

ITEM-41471

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

£ 500.00 (ex. VAT) 1 in stock

Irori AccuTag 100 Scanning Station Model: At-100-CS-CE Lab

ITEM-24838

This Irori AccuTag 100 Scanning Station Model: At-100-CS-CE was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. There are scratches/dents on the surface, along with stains. The accessories have been used and thus have broken seals.

The item was plugged in, but there wasn't any clear indication it had powered on. We were unable to test it further without a PC connection.

Also included are the following:

1x AccuTag Synthesis Manager Version 1.0

1x AccuTag Synthesis Manager Version 2.26

12x Irori Radio Frequency Tag

1x PSU

1x DE-9 cable

£ 500.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab

ITEM-25464

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.

There are 6 Racks inside with drawers that hold 5ml tubes.

£ 500.00 (ex. VAT) 1 in stock

AT Delta-T Logger System with Software & Accessories Lab

ITEM-25021

This was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.

The item is untested as it wasn't supplied with a PSU.

Also included are the following:

1x Delta-T Devices atmospheric temperature & humidity probe

S/N: RHAI-077

1x Delta-T PC software type LS2

Version 1.04

1x Desiccant Pack

1x DE-9 cable

1x Tutorial Kit

1x Spares & Accessory Pack

3x Component part (EMC directive) 5m

5x Temperature Probes User Manual

1x Quantum Sensor User Manual

1x Delta-T Devices Data Loggers, Sensors & Systems

1x Delta-T Devices Plant Science & Solar Radiation Studies

1x Delta-T Devices Image Analysis Systems

1x Delta-T Logger User Manual Version 2.01

£ 500.00 (ex. VAT) 1 in stock

PSL Rheotek TCB 8 Temperature Controlled Water Viscometer Bath Lab

ITEM-28205

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the heating is in good working order.

Inside tank dimensions - L59 W31 H37cm

It is in good cosmetic condition with some marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

WEG CFW -11 Venture Inverter Control Box Lab Spares/Repairs

ITEM-41470

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Julabo FL300 Recirculating Chiller - Spares/Repair Lab

ITEM-47581

Julabo FL300 Recirculating Chiller – Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit shows minimal wear, with both of the top catches on the lid broken; this does not affect physical operation of the doors.

The cable is damaged, and the unit will not power on, so it is being sold for spares or repair.

Model: FL300

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Milestone Ethos plus 2 SEL Microwave Solvent Extraction Labstation Spares/Repair

ITEM-41135

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller.

The system is sold for spares/repairs.

-1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller

1x easywave chip card for the controller

S/N- 0205722

-2x Rotor' for microwave

- Relevant vessels and safety shields for rotors

-2x ATC-FO sensors for microwave

-2x Torque wrenches for rotor

-2x Extraction Pipes

1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620

Includes: Pipette tracker v3.3 Software

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nikon Diaphot 300 Microscope *Condenser Removed* Lab Spares/Repairs

ITEM-39790

Nikon Diaphot 300 Microscope *Condenser Removed*

This microscope was removed from a university lab where it was surplus to requirements.

All mechanical elements are in good working order. The unit does not include the power supply or condenser therefore we are unable to perform any other tests. It is in good cosmetic condition with minor marks.

As stated in the title the condenser is not included.

It is made up of the following modules;

Nikon ND2 Filter

Nikon ND4 Filter

Nikon CFWN 10x/20 Eyepiece x 2

Nikon 100w Mercury Lamphouse LH-M100C-1

Nikon Halogen 12V 100W Microscope Lamp

£ 500.00 (ex. VAT) 1 in stock

Xerox Phaser 7400 Laser Printer With Ink Cartridges

ITEM-35876

Xerox Phaser 7400 Laser Printer With Ink Cartridges

This was removed from a university lab where it was surplus to requirements.

It powers up and is in good working order.

Includes 4 x ink cartridges:

-1 x Cyan (Imaging unit 108R00647)

-1 x Magenta (Imaging unit 108R00648)

-1 x Yellow (Imaging unit 108R00649)

-1 x Black (Imaging unit 108R00650)

Max prints per minute- 40

Model number- N31201B

Serial number- WNC757283

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs

ITEM-34798

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Nikon Microphot-FXA Fluorescence Microscope with HP-10101AF PSU & 4 x Objectives

ITEM-24299

This Nikon Microphot-FXA Fluorescence Microscope was removed from a university lab where it was surplus to requirements.

The PSU is missing so we were unable to power up the Microscope. It requires a Nikon PSM-4A. The power supply unit for the mercury lamp is present. The PSU is working but the bulb needs to be replaced.

The system is in reasonably good cosmetic condition with marks from use.

It has;

2x Nikon FX-350X 35mm film cameras attached via Nikon mounts.

1 x SOFT RTS 25.4 2mp slider with data lead.

1 x NIKON 4/0.10

1 x NIKON FLUOR 20 0.75 160/0.17

1 x NIKON FLUOR 40 0.85 160/0.11-0.23

1 x NIKON FLUOR 100 / 1.30 OIL 160/0.17

2 x CFWN D10 X/20

There is a PC with ISMOL Software & relevant PCI cards for connecting everything.

£ 500.00 (ex. VAT) 1 in stock

TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories Lab

ITEM-24618

TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories

This was removed from a university lab where it was surplus to requirements.

The system consists of;

1 x Echo HiVol Hi Volume Sampler

Model, Echo Hi Vol

110V

The unit powers on and is in good cosmetic condition. It was powered on by our Step down from the mains supply (not included).

The buttons seem a little slow to respond and there are some tape marks and scuffs and scratches around the unit from general use. The unit is lockable but no key is supplied. The key is included.

1 x Delta Wireless Sampler

Electronic Flow Sampler w/ Battery pack

Model Delta

110V

The unit powers on and is in good cosmetic condition. We did not charge Battery to test, as we used our Step down from the mains supply. (not included).

1 x Delta Battery pack

The unit is in good cosmetic condition. It was not tested.

2 x Flight Casea

3x Marigold gloves (size 9)

1x Spanner (size 10)

2x fuses T6.3AL 250V

4X keys

1x Widget H045

1x TCR Fine PM Air Inlet PM 2.5 200l/min

1x Metal Filter attachment

2x Glass chambers

1x Metal Dome

3x Sanitising spray

2x TCR TECORA plastic sample trays (3cm diameter)

6x Sample dishes with lids (14cm diameter)

4x Glass condensers 1x opened 3x factory sealed

1x Delta quick guide

2x Boxes of Microfibre Discs (1x opened 102mm Dia) quantity unknown

(1x sealed 100 Dia) quantity 100

1x Flurescein Green Concentrate (bottle partially full, sealed inside a bag it has leaked at some point.

1x Air pollution monitoring equipment (Metal chamber with hose)

1 x manual

1 x TCR Tecora TCR Downloader for Echo Series, Delta & Bravo Plus.

There is also a software disk included with this but it is entirely in Italian.

£ 500.00 (ex. VAT) 1 in stock

Soxtec Avanti 2050 Auto Fat Extraction System with Drive Unit Lab

ITEM-24537

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was surplus to requirements.

Included are;

1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction Unit

Part no. 10007330

1 x Foss Tecator 2050 Drive Unit

Part no. 10007338

The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit.

The item is in reasonably good cosmetic condition with some marks from use.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Fusion Packard Microplate Reader Analyser A153601 lab

ITEM-04960

This Perkin Elmer Fusion Packard Microplate Reader Analyser A153601 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in working order outside. The PC does continually come up with a server busy message, and we have been unable to resolve that, but there is a workaround.

The instrument is functioning fine and can run samples smoothly.

Failed PMT Dark Count (Photon Counting) - Failed due to high thermal electron current in the PMT due to high voltage in this mode. This will not affect the functionality of the instrument.

Passed PMT Dark (Charge Integration) and LED Control.

Server Busy message - This action cannot be complete because the other program is busy. Choose ‘Switch to’ to activate the busy program and correct the problem.

It is in very good cosmetic condition with only minor marks from use.

£ 500.00 (ex. VAT) 1 in stock

Bright Model M3500 Rotary Microtome Lab

ITEM-29829

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to requirements.

The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples.

It is in very good cosmetic condition with only minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System Spares/Repairs

ITEM-30328

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university lab where it was surplus to requirements.

The microscope focus motor/Z-Drive has been removed from this unit.

We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs.

Included in the system are;

1x GE IN Cell Analyzer 1000:

Dims: L85cm W70cm H70cm

The unit is in good cosmetic condition.

When connected up to the power supply we could not hear the unit power on.

Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up.

1x GE IN Cell Analyser 1000 Kinetic OZ Enabled

Model No. 28-4051-29

System No. 1316043

The unit powers on and is in good cosmetic condition.

The fans are working, they can be heard powering up immediately once the unit is powered on.

1x GE IN Cell Analyser 1000 ENDPNT OZ Enabled

Model No. 28-4051-28

System No. 1358008

The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it.

The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed.

EMKA Keys:

Model 2233X

2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled

2x keys for the GE IN Cell Analyser Kinetic OZ Enabled

All 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units.

We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other.

1x Optigrid Light Imaging System:

Model QIOPTIQ

The unit powers on and is in good cosmetic condition.

1x Xenon ARC Lamp Power supply w 2x keys:

Type 6

Part No. 56409187

The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly.

Keys:

model No. 901

The units are in good cosmetic condition

2x MVP Series Power supplies. ( 1x in each rack unit)

Model Nos. MP8-3Q-1L-00

Both units power on and are in good cosmetic condition. There is dust around and on both units from general use.

1x Hamilton power supply

Model No. 231352/00

The unit powered on and is in good cosmetic condition.

2x APC rack PDU

The units power on and are in good cosmetic condition.

1x GE cO2 Controller:

Ser No. 1352436

The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit.

2x Hewlett Packard PC's: HP workstation xw6200:

The units both power on and are in good cosmetic condition.

There is some dust around the units from general use.

Programs on PC:

•Overlord 2

Version 2.1.0.0

•IN Cell Analyser 1000 3.5

•IN Cell Analyser 1000 3.6

The program is password protected and we could not get past this window to access other parts of the program.

'Shutter Counter 1984048'.

3 x Low Voltage Computer Cables:

•28-4060-63 Umbellcal Axis 0734

•28-4060-66 0647

•28-4060-68 Umbellcal Hamilton 0738

1x Xenon lamp Bulb:

Model OSRAM XBO 100W OFR

The box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

All Products

Filters