All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5810R BenchTop Centrifuge Spares/Repair Lab

ITEM-46918

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

£ 500.00 (ex. VAT) 1 in stock

VWR PCR Plate Centrifuge II Lab

ITEM-49516

VWR PCR Plate Centrifuge II Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 500.00 (ex. VAT) 1 in stock

Ohaus Frontier Micro Centrifuge FC5513 Lab

ITEM-49518

Ohaus Frontier Micro Centrifuge FC5513 Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 500.00 (ex. VAT) 1 in stock

Grant FH15 Flow Heater and FC20 Flow Cooler Lab

ITEM-42784

Grant FH15 Flow Heater and FC20 Flow Cooler

This system was removed from a university laboratory where it was surplus to requirements.

The FH15 Flow Heater powered on with the pump running. The heater light illuminated when the set temperature was increased above ambient.

The FC20 Flow Cooler powered on, and both the compressor and fan could be heard operating.

These units do not include a built-in tank and require an external header tank to function as part of a complete system. Due to this, full-range temperature testing was not performed.

It is in good cosmetic condition.

Includes:

Grant FH15 Flow Heater (Serial No. 72311)
Grant FC20 Flow Cooler (Serial No. 72311)

Model: FH15 / FC20
Serial No.: 72311

£ 500.00 (ex. VAT) 1 in stock

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E No Blade

ITEM-42796

Cavey Laboratory Engineering McIlwain Tissue Chopper Model MTC/2E

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, powers on and is in good mechanical order. We are unable to test it further at our facility.

Please note; There is no blade present on the cutting arm.

£ 500.00 (ex. VAT) 1 in stock

VWR LA 214 Laboratory Balance

ITEM-49530

VWR LA 214 Laboratory Balance

This item is sold on behalf of a client where it is surplus to requirements.

This item has a max capacity of 220 g with a readability of 4 decimal places. It was serviced: 05/09/2024.

It is in perfectly good condition and working order, with no significant cosmetic defects. The balance was in use in an industry laboratory up until June 2025 and was removed during a lab shutdown.

The item comes with the power cable.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Agilent 2100 G2939A Bioanalyzer System & DNA Chips Spares/Repair Lab

ITEM-48419

Agilent 2100 G2939A Bioanalyzer System & Accessories Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however it could not be fully tested as two channels show high leakage currents.

Therefore, it is being sold as spares or repair.

Includes:

1 box x High Sensitivity DNA Chips (5 in box) – expires Jan 2026
1 box x High Sensitivity DNA Chips (10 in box) – expires Jan 2026
1 box x Electrode Cleaners (5 in box)
1 box x Chip Priming Station
1 x Bayonet Electrode Cartridge (in blue case)
1 box x 11 Syringe Kits
1 box containing Test Chip Kit/Electrode/Diode Test Chip & USB 2.0 Cable

Model: 2100 Bioanalyzer

Serial No.: DE13805731

Product No.: G2938C

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller Spares/Repair Lab

ITEM-47102

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition; however, it cannot be powered on due to the absence of a plug and a split in the flex exposing the internal wires.

It is therefore sold as spares or repair.

Includes:

Carl Zeiss Surgical Microscope
Metz NAG 80 VA Controller

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs

ITEM-41471

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

£ 500.00 (ex. VAT) 1 in stock

Irori AccuTag 100 Scanning Station Model: At-100-CS-CE Lab

ITEM-24838

This Irori AccuTag 100 Scanning Station Model: At-100-CS-CE was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition. There are scratches/dents on the surface, along with stains. The accessories have been used and thus have broken seals.

The item was plugged in, but there wasn't any clear indication it had powered on. We were unable to test it further without a PC connection.

Also included are the following:

1x AccuTag Synthesis Manager Version 1.0

1x AccuTag Synthesis Manager Version 2.26

12x Irori Radio Frequency Tag

1x PSU

1x DE-9 cable

£ 500.00 (ex. VAT) 1 in stock

GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab

ITEM-25464

This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.

There are 6 Racks inside with drawers that hold 5ml tubes.

£ 500.00 (ex. VAT) 1 in stock

AT Delta-T Logger System with Software & Accessories Lab

ITEM-25021

This was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.

The item is untested as it wasn't supplied with a PSU.

Also included are the following:

1x Delta-T Devices atmospheric temperature & humidity probe

S/N: RHAI-077

1x Delta-T PC software type LS2

Version 1.04

1x Desiccant Pack

1x DE-9 cable

1x Tutorial Kit

1x Spares & Accessory Pack

3x Component part (EMC directive) 5m

5x Temperature Probes User Manual

1x Quantum Sensor User Manual

1x Delta-T Devices Data Loggers, Sensors & Systems

1x Delta-T Devices Plant Science & Solar Radiation Studies

1x Delta-T Devices Image Analysis Systems

1x Delta-T Logger User Manual Version 2.01

£ 500.00 (ex. VAT) 1 in stock

PSL Rheotek TCB 8 Temperature Controlled Water Viscometer Bath Lab

ITEM-28205

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the heating is in good working order.

Inside tank dimensions - L59 W31 H37cm

It is in good cosmetic condition with some marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

WEG CFW -11 Venture Inverter Control Box Lab Spares/Repairs

ITEM-41470

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Julabo FL300 Recirculating Chiller - Spares/Repair Lab

ITEM-47581

Julabo FL300 Recirculating Chiller – Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit shows minimal wear, with both of the top catches on the lid broken; this does not affect physical operation of the doors.

The cable is damaged, and the unit will not power on, so it is being sold for spares or repair.

Model: FL300

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs

ITEM-34798

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Milestone Ethos plus 2 SEL Microwave Solvent Extraction Labstation Spares/Repair

ITEM-41135

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller.

The system is sold for spares/repairs.

-1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller

1x easywave chip card for the controller

S/N- 0205722

-2x Rotor' for microwave

- Relevant vessels and safety shields for rotors

-2x ATC-FO sensors for microwave

-2x Torque wrenches for rotor

-2x Extraction Pipes

1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620

Includes: Pipette tracker v3.3 Software

£ 500.00 (ex. VAT) 1 in stock

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle Lab

ITEM-35288

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle

This was removed from a university lab where it was surplus to requirements.

Included are;

702 SM Titrino with remote.

The unit powers on and performs self-check.

703 Ti Stand

We were unable to locate the PSU for this unit. It was not supplied to us, so it is untested.

Metrodata software disc (A.701.0009) and accompanying dongle (6.2145.050).

£ 500.00 (ex. VAT) 1 in stock

Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM Lab

ITEM-35530

Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM

This was removed from a university lab where it was surplus to requirements.

The gate fully opens and closes, rubber seal still present. It is in good cosmetic condition with marks from use.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Ace Glass Jacketed Pressure Reaction Vessel 14cm Flange Bottom Outlet

ITEM-36059

Ace Glass Jacketed Pressure Reaction Vessel 14cm Flange Bottom Outlet

This was removed from a university lab where it was surplus to requirements.

The unit is new and shows no signs of use.

The flange at the bottom is 14cm, though there is no suggestion of the volume.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Christie Mirage Model S+4K Commercial Projector Spares/Repairs

ITEM-36557

Christie Mirage Model S+4K Commercial Projector

This was removed from a university lab where it was surplus to requirements.

The unit powers up but is displaying with a green tinge. We were unable to get this to change.

The lamp has run for 780 hours.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope Lab Faulty

ITEM-38264

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope

This system was removed from a university lab where it was surplus to requirements.

The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs.

Cosmetic and working conditions vary as stated below each item.

ADE Phase Shift MicroXAM-100

Model: MicroXAM-100

The item is in excellent cosmetic condition and shows no signs of damage.

However, when switched on, the item does not power on.

The item includes the following components:

- Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.

- 50AT NA 0.55 885 Objective: This objective is untested.

- Phase Shift Technology Rotary Stage 4360:

Model: Rotary Stage 4360

Serial#: L56332-3021

The rotary stage is in good cosmetic condition and shows no signs of damage.

However, when switched on, it does not power on.

- Javelin Video Monitor:

Model: BWM9BX

Serial#: 7070083

The video monitor is in good cosmetic condition.

It powers on with the power light illuminated.

- Nikon Transformer and Nikon 50W AD Lamp:

Model: UN

Both the transformer and the Nikon lamp are in good condition and fully functional.

The light output can be adjusted fully.

- AD Phase Shift Controller:

Serial#: E71000-500

The phase shift controller is in good cosmetic condition.

It powers on with the power light illuminated.

Unfortunately, further testing could not be conducted.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leitz Dialux 22 Fluorescence Microscope With Camera + Control Unit Lab Faulty

ITEM-39087

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit

This system was removed from a university lab where it was surplus to requirements.

The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp.

Due to the faults listed above, this system is listed as Spares/Repair.

The system comprises the following:

Leitz Vario Orthomat Controller
Leitz Power Supply for Lamp
Leitz Vario Orthomat 2 Camera
Leitz Wetzlar 100W Lamp (Type: 307-143.003)

5 x Objectives:

NPL Fluotar 6.3/0.20
NPL Fluotar 16/0.45
NPL Fluotar 40/0.70
Leitz EF 63/0.85
Leitz PL 2.5/0.08

2 x Leitz Eyepieces Periplan GW 10x M

Model: Dialux 22

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nikon Diaphot 300 Microscope *Condenser Removed* Lab Spares/Repairs

ITEM-39790

Nikon Diaphot 300 Microscope *Condenser Removed*

This microscope was removed from a university lab where it was surplus to requirements.

All mechanical elements are in good working order. The unit does not include the power supply or condenser therefore we are unable to perform any other tests. It is in good cosmetic condition with minor marks.

As stated in the title the condenser is not included.

It is made up of the following modules;

Nikon ND2 Filter

Nikon ND4 Filter

Nikon CFWN 10x/20 Eyepiece x 2

Nikon 100w Mercury Lamphouse LH-M100C-1

Nikon Halogen 12V 100W Microscope Lamp

£ 500.00 (ex. VAT) 1 in stock

Nikon Microphot-FXA Fluorescence Microscope with HP-10101AF PSU & 4 x Objectives

ITEM-24299

This Nikon Microphot-FXA Fluorescence Microscope was removed from a university lab where it was surplus to requirements.

The PSU is missing so we were unable to power up the Microscope. It requires a Nikon PSM-4A. The power supply unit for the mercury lamp is present. The PSU is working but the bulb needs to be replaced.

The system is in reasonably good cosmetic condition with marks from use.

It has;

2x Nikon FX-350X 35mm film cameras attached via Nikon mounts.

1 x SOFT RTS 25.4 2mp slider with data lead.

1 x NIKON 4/0.10

1 x NIKON FLUOR 20 0.75 160/0.17

1 x NIKON FLUOR 40 0.85 160/0.11-0.23

1 x NIKON FLUOR 100 / 1.30 OIL 160/0.17

2 x CFWN D10 X/20

There is a PC with ISMOL Software & relevant PCI cards for connecting everything.

£ 500.00 (ex. VAT) 1 in stock

TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories Lab

ITEM-24618

TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories

This was removed from a university lab where it was surplus to requirements.

The system consists of;

1 x Echo HiVol Hi Volume Sampler

Model, Echo Hi Vol

110V

The unit powers on and is in good cosmetic condition. It was powered on by our Step down from the mains supply (not included).

The buttons seem a little slow to respond and there are some tape marks and scuffs and scratches around the unit from general use. The unit is lockable but no key is supplied. The key is included.

1 x Delta Wireless Sampler

Electronic Flow Sampler w/ Battery pack

Model Delta

110V

The unit powers on and is in good cosmetic condition. We did not charge Battery to test, as we used our Step down from the mains supply. (not included).

1 x Delta Battery pack

The unit is in good cosmetic condition. It was not tested.

2 x Flight Casea

3x Marigold gloves (size 9)

1x Spanner (size 10)

2x fuses T6.3AL 250V

4X keys

1x Widget H045

1x TCR Fine PM Air Inlet PM 2.5 200l/min

1x Metal Filter attachment

2x Glass chambers

1x Metal Dome

3x Sanitising spray

2x TCR TECORA plastic sample trays (3cm diameter)

6x Sample dishes with lids (14cm diameter)

4x Glass condensers 1x opened 3x factory sealed

1x Delta quick guide

2x Boxes of Microfibre Discs (1x opened 102mm Dia) quantity unknown

(1x sealed 100 Dia) quantity 100

1x Flurescein Green Concentrate (bottle partially full, sealed inside a bag it has leaked at some point.

1x Air pollution monitoring equipment (Metal chamber with hose)

1 x manual

1 x TCR Tecora TCR Downloader for Echo Series, Delta & Bravo Plus.

There is also a software disk included with this but it is entirely in Italian.

£ 500.00 (ex. VAT) 1 in stock

Soxtec Avanti 2050 Auto Fat Extraction System with Drive Unit Lab

ITEM-24537

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was surplus to requirements.

Included are;

1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction Unit

Part no. 10007330

1 x Foss Tecator 2050 Drive Unit

Part no. 10007338

The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit.

The item is in reasonably good cosmetic condition with some marks from use.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Fusion Packard Microplate Reader Analyser A153601 lab

ITEM-04960

This Perkin Elmer Fusion Packard Microplate Reader Analyser A153601 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in working order outside. The PC does continually come up with a server busy message, and we have been unable to resolve that, but there is a workaround.

The instrument is functioning fine and can run samples smoothly.

Failed PMT Dark Count (Photon Counting) - Failed due to high thermal electron current in the PMT due to high voltage in this mode. This will not affect the functionality of the instrument.

Passed PMT Dark (Charge Integration) and LED Control.

Server Busy message - This action cannot be complete because the other program is busy. Choose ‘Switch to’ to activate the busy program and correct the problem.

It is in very good cosmetic condition with only minor marks from use.

£ 500.00 (ex. VAT) 1 in stock

Bright Model M3500 Rotary Microtome Lab

ITEM-29829

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to requirements.

The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples.

It is in very good cosmetic condition with only minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System Spares/Repairs

ITEM-30328

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university lab where it was surplus to requirements.

The microscope focus motor/Z-Drive has been removed from this unit.

We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs.

Included in the system are;

1x GE IN Cell Analyzer 1000:

Dims: L85cm W70cm H70cm

The unit is in good cosmetic condition.

When connected up to the power supply we could not hear the unit power on.

Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up.

1x GE IN Cell Analyser 1000 Kinetic OZ Enabled

Model No. 28-4051-29

System No. 1316043

The unit powers on and is in good cosmetic condition.

The fans are working, they can be heard powering up immediately once the unit is powered on.

1x GE IN Cell Analyser 1000 ENDPNT OZ Enabled

Model No. 28-4051-28

System No. 1358008

The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it.

The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed.

EMKA Keys:

Model 2233X

2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled

2x keys for the GE IN Cell Analyser Kinetic OZ Enabled

All 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units.

We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other.

1x Optigrid Light Imaging System:

Model QIOPTIQ

The unit powers on and is in good cosmetic condition.

1x Xenon ARC Lamp Power supply w 2x keys:

Type 6

Part No. 56409187

The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly.

Keys:

model No. 901

The units are in good cosmetic condition

2x MVP Series Power supplies. ( 1x in each rack unit)

Model Nos. MP8-3Q-1L-00

Both units power on and are in good cosmetic condition. There is dust around and on both units from general use.

1x Hamilton power supply

Model No. 231352/00

The unit powered on and is in good cosmetic condition.

2x APC rack PDU

The units power on and are in good cosmetic condition.

1x GE cO2 Controller:

Ser No. 1352436

The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit.

2x Hewlett Packard PC's: HP workstation xw6200:

The units both power on and are in good cosmetic condition.

There is some dust around the units from general use.

Programs on PC:

•Overlord 2

Version 2.1.0.0

•IN Cell Analyser 1000 3.5

•IN Cell Analyser 1000 3.6

The program is password protected and we could not get past this window to access other parts of the program.

'Shutter Counter 1984048'.

3 x Low Voltage Computer Cables:

•28-4060-63 Umbellcal Axis 0734

•28-4060-66 0647

•28-4060-68 Umbellcal Hamilton 0738

1x Xenon lamp Bulb:

Model OSRAM XBO 100W OFR

The box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 Lab

ITEM-30514

This Varian TV 81-T Turbo Turbomolecular Pump Model 9698905M001 was removed from a university lab where it was surplus to requirements.

The pump has been tested with a controller (not included) and is in working order, but has not been tested under a vacuum.

It is in good cosmetic condition with minor marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Fujifilm FLA-3000R Fluorescent Image Analyzer Spares/Repairs

ITEM-30522

This was removed from a university lab where it was surplus to requirements.

The unit powers up but a warning light flashes. It was not tested further.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

TQ TD1050 Steam Engine Trainer Teaching Rig Apparatus Lab

ITEM-31869

TQ TD1050 Steam Engine Trainer Teaching Apparatus Rig

This was removed from a university lab where it was surplus to requirements.

It is in full working order.

Included are;

TD1050 General Assembly

TQ165554-001

TD1050 - DTS2 Torque/Speed Display Unit

TQ160508-001

TD1050-DT1 Temperature Display

TQ165554-001

VDAS-F - VDAS Frame Mounted Version

TQ156326-009

Grosvenor Pump

Model - 5583

SN - 21278

Dynatherm Part no. 42673

SN - 13107-1

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

ITEM-08317

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

This item was removed from a university where it was surplus to requirement.

This item is in poor cosmetic condition and is sold as Spares/Repair.

The lid of the item is not fixed, and the internal pump has been removed.

£ 495.00 (ex. VAT) 1 in stock

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

ITEM-36538

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

The units are brand new and unused.

2x Boxes of MC0HC10FS1

6x Boxes of MC0HC054H1

1x Plastic Pack of Optiscale DisposableCapsule Filters

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

ITEM-36555

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

This was removed from a university where they were surplus to requirements.

1x Yamaha RX V1500

S/N: Y066054VX

1x Extron MVX 84 VGA A

S/N: 33-1023-01 REV C

1x AMX NI-3000 Integrated Controller

1x AMX NFX-Mini

1x Universal Open Rack Cabinet with Wheels, black

1x Jamo D 6SUB

S/N: 16211050024

All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

£ 495.00 (ex. VAT) 1 in stock

Lot of HP & Agilent Chromatograph Circuit Boards Lab

ITEM-38796

Lot of HP & Agilent Chromatograph Circuit Boards

The units are untested.

Included are;

1 X HP 5890 10245-60015 Gas Chromatograph Electronic Pressure Control Board
1 X HP E2071/82341 ISA Interface Card E2073-66501 HPIB GPIB Board
2 X Agilent HP 5890A 5890 II GC ECD Electron Capture Detector Board 19233-60015
1 X Agilent HP 19257-60015 & 19257-60020 5890 Series II HPIB GPIB
1 X Berger SFC Minigram Circuit Boards STI460093684, 40200G9D6, 19257-60505
3 X HP Agilent SERIES II GAS CHROMATOGRAPH 5890 Keypad 05890-60740
2 X Agilent HP 5890 GC II 120V Single Phase Power Supply 05890-60050 Chromatograph

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Dionex P580A Low Pressure Gradient Degassing Pump Lab

ITEM-38784

Dionex P580A Low Pressure Gradient Degassing Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 490.00 (ex. VAT) 1 in stock

Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

ITEM-29830

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use.

It is supplied with;

3 x WF 10X Eyepieces.

2 x Covers.

1 x Eyepiece (no information).

1 x 10 x P Eyepiece.

1 x Spare Fuse Part No. (670.55327).

1 x Tool Part No. (019.0120.0).

1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

£ 485.00 (ex. VAT) 1 in stock

KNF Neuberger N 035 AN.18 Diaphragm Vacuum Pump

ITEM-38768

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 460.00 (ex. VAT) 1 in stock

Jeol JEM-1200 EX Pump and Pressure Tank

ITEM-39684

Jeol JEM-1200 EX Pump and Pressure Tank

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in good cosmetic condition with marks from use.

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 455.00 (ex. VAT) 1 in stock

MakerBot Replicator Model Z18 3D Printer 5th Gen

ITEM-37488

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal.

No filament spool is included.

Usage:

Print time: 188.12 hours
Mass extruded: 3.1 kg

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)

£ 455.00 (ex. VAT) 1 in stock

MotionLink Model ServoStep Rackmount Motor Driver

ITEM-43090

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.