Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on. During testing, it failed to reach the set temperature of -40˚C, only cooling down to 7˚C.

Therefore, it is listed as Spares/Repair.

Additionally, three inner door slide catches are missing.

Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, during testing it failed to cool and remained at ambient temperature when set to -86ºc. Further inspection iden

Therefore, it is listed as Spares/Repair.

Nikon Apophot Table Microscope with 4 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the halogen bulb is working, but there appears to be no power going to the second lamp. Without the second lamp working we were unable to see a clear image during testing. We feel it may need a degree of refurbishment to get it working again so it is sold for spares or repairs.

It is in good cosmetic condition but has marks from age and use.

Item supplied with:

1 x Nikon Apophot Microscope.

1 x Nikon Transformer.

1 x Nikon 78567 DLL 40 0.65 0.17 Objective.

1 x Nikon 42502 10 Plan 0.25 Objective.

1 x Nikon 70693 DLL 40 0.65 0.17 Objective.

1 x Nikon 33525 DL 10 0.30 Objective.

2 x Nikon control panel.

2 x Nikon AFM.

2 x Nikon Eyepiece HKW 10x.

2 x Nikon Eyepiece HK 5x.

2 x Microtec WF 10x.

3 x Nikon M-35 S Camera.

Item powered on:

Nikon Transformer powered on.

Halogen bulb working.

Cecil Type CE 7200 Spectrometer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, the display screen is damaged.

Therefore, it is listed as Spares/Repair.

Cecil CE 7200 Spectrometer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, the display screen is damaged.

Therefore, it is listed as Spares/Repair.

Shimadzu Total Organic Carbon Analyzer TOC-4200

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in fair cosmetic condition externally, but the internal condition is poor. The cut cable is a IEC cable.

The following errors were noted during testing, as well as required consumables. Due to the errors listed, this system is listed as Spares/Repair.

Errors:

• 8PORT VALVE
• DEHUM FAN
• Blown capacitor on communication board.

Requires Consumables:

• CO2 ABS1
• CO2 ABS2
• PLUNGER TIP
• OIL SEAL.

Model: TOC-4200

Perkin Elmer Piezorray Flexible Non-contact Microarraying System Spares/Repair

This system was removed from a university laboratory where it was surplus to requirements.

The Piezorray system powers up but encounters a software error indicating a problem with the device drivers or compatibility issues when connected to the PC.

The error prevents further use and testing of the system.

Therefore, it is listed as Spares/Repair.

The system comprises the following:

• 1 x Perkin Elmer Piezorray main unit
• 1 x Enclosure, seemingly custom for the Piezorray
• 1 x Perkin Elmer Precisely Unit
• 1 x Non-branded blue and white unit
• 1 x Cole Parmer Air Admiral Pump
• 1 x Elga PURELAB UHQ
• 1 x Cole Parmer Programmable Polystat Chiller
• 1 x StockerYale IMAGELITE MODEL 20 light source with Lightpipe
• 1 x Dell Optiplex 280 PC with Windows XP OS, Perkin Elmer Piezorray software, and National Instruments Measurement & Automation software, including keyboard, mouse, and monitor

Includes:

• 3 x Tecan 731070 Syringes (used)
• 2 x Spare temperature-controlled microplate holders
• 5 x ADKH501-4PK Test Record Autodrop Pipettes (new)
• Various spare tubing

Note: Tables are not included in the sale.

Don Whitely MK3 Anaerobic Bench Top Work Station

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but is not in working order, mainly due to a faulty gas inlet valve.

It powers on with functional temperature control and cooling fans. Key issues include non-working internal power sockets, flashing low CO2 and N2 warning lights, and a broken outer door lock seal knob, which compromises the chamber's sealing.

Due to the faults listed above, this system is listed as Spares/Repair.

Features:

• Uses hydrogen, nitrogen, and carbon dioxide or a standard anaerobic gas mixture.
• Digital temperature controller for constant temperature maintenance.
• Humidistat-controlled condensing plate for excess moisture removal.
• 30-litre interchange lock capable of holding 108 plates with vacuum flushing.

Includes:

• User Instruction Manual

Serial No.: 3170S

Hitachi F-4500 Fluorescence Spectrophotometer System

This item was removed from a university laboratory where it was surplus to requirements.

The Hitachi F-4500 unit does not power on; however, it is in good condition with minimal wear. The previous owner said the PSU had failed.

Due to it not powering on it is listed as Spares/Repair

Includes:

• Vigen Genie P3 500 Computer
• Model: F-4500
• Serial No.: 1163-004
• Software: F-4500 FL_mnu - 2504060-05.

Nikon BioStation IM With Parts

This system was removed from a university lab where it was surplus to requirements.

The unit is in poor cosmetic condition and cannot be powered on or tested as several parts are missing or not connected.

Therefore, this system is listed as Spares/Repair.

New Brunswick Scientific U570 -45 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

Gallenkamp Industrial BR185H C RO Environmental Chamber Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed PAT on insulation after numerous attempts.

Therefore, further testing could not be complete and it is listed as Spares/Repair.

COURAGE + KHAZAKA Cutometer MPA580

This was removed from a university lab where it was surplus to requirements.

The unit did not power up in testing. It is sold for spares/repairs.

Packard 9200 Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen.

It is in reasonably good cosmetic condition, but has some marks from use.

it is sold for spares/repairs

Molecular Dynamics Storm 860 Molecular Phosphor Imager – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

The system powers on, with cooling fans and status lights operating. No further testing was possible due to the absence of a control PC and software.

The previous owner reported it as faulty, but no specific faults were disclosed.

Includes:

• Imager unit only
• 1 x data cable

Varian 4000 GC/MS Gas Chromatograph 3800/3380 Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirements.

The previous owner has stated that various internal parts were removed.. Additionally, it is a visual PAT fail due to the top panel being removed.

Therefore, it was not powered on, and is listed as Spares/Repair.

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ProCon Integration Switcher PC / Audio / Video / Control IT AV

Stuart SI20H Hybridisation Oven / Shaker Lab Heating Equipment

Luckham Rotatest Platform Shaker Model - R100 Lab

Planer Kryosave Compact K250/1.7 & Temperature Gauge Model K51-230-N-F-H Lab

Pharmacia Biotech XK 50 Column, Accessory Kit & N-Acetyl-D-Galactosamine 250mg

CE Instruments AS 800 Autosampler Model - AS 800 C.U. Lab

LABCONCO 7455100 Centrifugal Evaporator Rotor with 148 x 2ml Wells Lab

Intavis Bioanalytical Instruments BioLane HTI 16V In Situ Hybridization System

Vickers Instruments Microscope w/ 3 x Objectives 40/ 0.70 10/ 0.25

Janke & Kunkel IKA-Labortechnik TP18/10 Homogeniser & TR50 Controller Lab

Ophir Laser Power Monitor with Gentee Joulemeter ED-200 Lab

Molecular Devices Vmax Kinetic Microplate Reader Lab

Packard SpectraCount Absorbance Microplate Reader Model: AS10001

Coulter ZM Cell Counter, S.ST.II Sampling Stand & V.C.U. VWII Vacuum Container

Rank Brothers Model 10 Integrated Oxygen Measurement Unit Lab

Hettich Mikro 185 Microcentrifuge Centrifuge Lab

Hettich Mikro 185 Microcentrifuge with 13300rpm Rotor Lab

Integra Vacusafe (158 3xx) With 2 x Integra Vacuboy Pipettes

Thermo Scientific Direct Exposure Probe

Griffin And George LTD Vernier Microscope With Box of Optics

MJ Research PTC-225 Peltier Thermal Cycler

Sirah PCH-1000 Circulator for Laser

Stuart Block Heater SBH130D Lab

Kyowa Light Controller

Leitz Microscope Power Supply

Zeiss Axio Standard X-Cite Adaptor

Zeiss AxioCam MRm

Misc microscope attatchment

Genomic Vision Fiber Vision Automated Scanner Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however the previous owner has notified us that it is not in working order and Genomics are no longer available for support.

Therefore, it is listed as Spares/Repair.

ProteinSimple FluorChem E Imaging System

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition. It powers on with "ProteinSimple" background and functional touchscreen/mouse.

Additionally, it emits an unhealthy noise when powered and the UV transilluminator does not appear to activate,

Therefore, it is listed as Spares/Repair

The previous owner stated the following: UV gel scanner, "lights half of the gel" and may need attention.

This Protein Simple FluorChem E Imaging System was removed from a university lab where it was surplus to requirements.

The unit powers up and the camera is working, but the lab confirmed the system has a hard disk error.

We found it to have issues with he white light LED, the focus drive and the stepper motor.

It is in otherwise good cosmetic condition with minor marks.

Sold for spares/repairs

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with only minor marks from use.

The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault.

The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed.

Guavasoft 3.1 has also been installed, which includes:

ViaCount.

InCyte (This requires an unlock code from Millipore to run).

easyCheck.

Guava Clean 3.1.

We have been able to open and close the sample tray. This proves that the system is fully connected.

It is sold for spares/repairs.

This Malvern MSX Mastersizer Particle Size Analysis System was removed from a university lab where it was surplus to requirements. The lab reported it had not been used for a number of years, but was working when they last used it.

The unit will likely require significant refurbishment, and for that reason it is sold for spares/repairs.

Included are;

1 x Malvern Particle Size Analysis Unit

Model MSX

The unit powers on and is in good cosmetic condition.

1 x Malvern Small Volume Sample Presentation Unit.

DIF 2000

The unit powers on and is in good cosmetic condition. It's in working order.

Accessories:

1x Laser enable key (850)

1x Malvern chamber Rittal key

1x Case strap

2x Case keys

3x Lenses

1x 45mm

1x300mm

1x pinhole

All lenses appear to be in good cosmetic condition.

Lens caps:

3x 67mm

1x 58mm

1x 46mm

1x 30ml clear plastic bottle (empty)

6x Clear tubing (various lengths)

4x Allen keys (various sizes)

2x wooden focal cassettes

2x cotton buds

1x Glass cassette

1x Metal arm/leaver (32908-29)

1x T1A 250v quick blow fuse

Floppy discs

12x Microsoft software

6x Malvern software

1 x Fast internet Access Supra Install CD

1x Supra Express Manual

4x User Manuals:

The units are in good cosmetic condition. It is unclear if there is missing information from the manuals as some folders contain loose papers.

This Zeiss LSM 510 Meta Confocal High Resolution Microscope System was removed from a university lab as it developed a fault. The university reported:

"We have a confocal microscope (Zeiss LSM510 Meta) which we are hoping to sell. It powers up but doesn’t fully work, there must be a loose connection somewhere but I don’t have the time or space to work out where."

The units are all generally in reasonable used cosmetic condition. All parts do power up individually but we could not get the system to run either. We believe there should be a PC containing software that we do not have.

The system is sold for spares/repairs.

The system consists of:

1 x Zeiss Axiovert 200M Microscope (1312-732)

Fitted with:

1 x Zeiss 1269-455 Dual Illumination Source Motorised Mirror Switch.

1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal.

2 x Zeiss 1016-758 W-PI 10x /23 eyepieces.

1 x HBO 100 Lamp 098.0042.000 (01/03163).

1 x HAL 100 Lamp 42 30 00.

With EBQ 100 Isolated Lamp PSU.

1 x Zeiss Laser Module 1294-260.

Two of the wheels are broken, so they have all been removed and it has been put on a pallet.

1 x Zeiss LSM510 Meta System.

Release 3.5 META 1305-593.

With Zeiss Remote 1260-157.

1 x Microscope isolation table.

Measures: 150cm L x 80cm W x 77cm H.

1 x Zeiss Temperature Control - 37 (0115.000).

1 x Zeiss AIM-SYSTEM Interface box 2436000101.