All Products

£ 500.00 (ex. VAT) 1 in stock

Ultimaker 2+ 3D Printer w/ Reel of 3DXTech PLA

ITEM-47255

Ultimaker 2+ 3D Printer w/ Reel of 3DXTech PLA

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Test video available on request.

Included;

Power Supply Cable

1 x Reel of 3DXTech PLA

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Millipore Guava easyCyte 8HT Flow Cytometer Spares/Repair Lab

ITEM-47332

Millipore Guava easyCyte 8HT Flow Cytometer – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

The DSP board and motion board have been replaced, with firmware and software updated to version 3.1.1. The tray was realigned following the motion board replacement, and the lasers have been recalibrated.

The red laser is operating at half power and has been disabled, so the system can run correctly on the blue laser, which is currently passing electronic checks. GuavaSoft 3.1.1 is installed.

Please note: The laptop containing the installed software has a damaged screen, so an external monitor is required for operation. Monitor not included.

It is in spares/repair condition due to the red laser requiring replacement.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab Spares/Repair

ITEM-47420

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The casing is in good used cosmetic condition. However, following internal components have been removed:

2 x lid locks/mechanisms
1 x motor

The main board is present but faulty and displays an E33 error on startup. The condition of other internal components—including the compressor, display, and temperature sensor is unknown and has not been tested.

Therefore, it is listed as Spares/Repair.

Please note: There is no rotor included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab Spares/Repair

ITEM-47421

Thermo Scientific Megafuge 40R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge displays an E33 error, indicating a fault with the main board. The working condition of the remaining parts is unknown:

2 x Lid locks (at least one reported to have an issue)
1 x Motor
1 x Compressor
1 x Display board
1 x Temperature sensor

Due to the issues stated above, this centrifuge is listed as Spares/Repair.

Please note: There is no rotor included.

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter System Gold 126 Solvent Module, 127 Solvent Module, 116 Detector

ITEM-47512

Beckman Coulter System Gold 126 & 127 Solvent Modules with 166 Detector

This system was removed from a university laboratory where it was surplus to requirements.

All three units power on and are in good cosmetic condition with minimal wear. The system could not be tested further in our facility.

Includes:

Beckman Coulter System Gold 126 Solvent Module
Model: 126 Solvent Module
Serial No.: 513-2525
Beckman Coulter System Gold 127 Programmable Solvent Module (Version 1.3)
Model: 127 Programmable Solvent Module
Serial No.: 125-1053
Beckman Coulter System Gold 166 Detector
Model: 166 Detector
Serial No.: 423-2320

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Julabo FL300 Recirculating Chiller - Spares/Repair Lab

ITEM-47581

Julabo FL300 Recirculating Chiller – Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit shows minimal wear, with both of the top catches on the lid broken; this does not affect physical operation of the doors.

The cable is damaged, and the unit will not power on, so it is being sold for spares or repair.

Model: FL300

£ 500.00 (ex. VAT) 1 in stock

Stratasys Objet30 3D Printer 2011

ITEM-47605

Stratasys Objet30 3D Printer

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, the client stated it was in good working order prior to removal.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Motic AE 2000 Inverted Microscope w 4 x Objectives 4/10/20/40x LWD Spares/Repair

ITEM-47616

Motic AE 2000 Inverted Microscope with 4 x Objectives (4x, 10x, 20x LWD, 40x LWD)

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in good cosmetic condition, but is not functional due to an internal fault.

Includes objectives:

Motic 4X/0.1 ∞/-
Motic 10X/0.25 Ph1 ∞/1.1
Plan LWD 20X/0.3 Ph1 ∞/1.1 WD4.7
Plan LWD 40X/0.5 ∞/1.1 WD3.0

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hermle Z 300 K Centrifuge - Spares/Repair Lab

ITEM-47684

Hermle Z 300 K Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and shows minimal wear.

However, during testing it failed to reach the set temperature, stabilizing at 25°C, and did not achieve the rotor’s maximum speed of 5000 RPM, reaching only 4000 RPM.

Therefore, it is listed as spares/repair.

Model: Z 300 K

Serial No.: 55060105

£ 500.00 (ex. VAT) 1 in stock

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

ITEM-48344

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

Please note; The Cartridges and Filters require replacement as the current ones have expired.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump Spares/Repair Lab

ITEM-48347

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on; however, the previous owner has stated it is faulty, with the fault unspecified. Supplied with cables for connecting to the rest of a system, along with an Automatic Backpressure Valve (PN-900-13702-000).

Includes:

Cables for system connection
Automatic Backpressure Valve (PN-900-13702-000)

£ 500.00 (ex. VAT) 1 in stock

15 x VWR Maxi 20 Electrophoresis Horizontal Gel Tanks Lab

ITEM-48382

15 x VWR Maxi 20 Electrophoresis Horizontal Systems

These items were removed from a university lab where they were surplus to requirements.

All units are in fair cosmetic condition.

Includes:

Wires and accessories for each system
Manuals

£ 500.00 (ex. VAT) 1 in stock

Granite Microscope Table Air Anti Vibration Table (150 L x 80 W x 77 H cm) Lab

ITEM-48388

Microscope Table Air Anti Vibration Table 150 L x 80 W x 77 H cm Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

Hole measurements:

20 x 15 cm
10 x 10 cm

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

ITEM-48416

Beckman Coulter SW 41 TI 41,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Rotor Type Ultra – Swinging Bucket
Maximum Speed 41,000 rpm
Maximum RCF at r max (g) 288,000 x g
k-Factor 124
Rotor Material Titanium
Bucket Material Titanium, Anodized Aluminum Cap

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

ITEM-48418

Beckman Coulter SW 40 TI 40,000 RPM Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and remains untested.

Specifications;

Platform: Floor Prep
Rotor Type: Swinging-Bucket (Ultracentrifugation)
Maximum RPM: 40,000 rpm
Max g-Force: 285,000.00
k-Factor: 137
Number of Tubes: 6×14 mL / 14×95 mm(6×14 mL / 1×4 in)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Agilent 2100 G2939A Bioanalyzer System & DNA Chips Spares/Repair Lab

ITEM-48419

Agilent 2100 G2939A Bioanalyzer System & Accessories Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however it could not be fully tested as two channels show high leakage currents.

Therefore, it is being sold as spares or repair.

Includes:

1 box x High Sensitivity DNA Chips (5 in box) – expires Jan 2026
1 box x High Sensitivity DNA Chips (10 in box) – expires Jan 2026
1 box x Electrode Cleaners (5 in box)
1 box x Chip Priming Station
1 x Bayonet Electrode Cartridge (in blue case)
1 box x 11 Syringe Kits
1 box containing Test Chip Kit/Electrode/Diode Test Chip & USB 2.0 Cable

Model: 2100 Bioanalyzer

Serial No.: DE13805731

Product No.: G2938C

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VAC HE-63-P PEDATROL GloveBox Lab Spares/Repairs

ITEM-41335

VAC HE-63-P PEDATROL GloveBox Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

The item is missing its back panel, which prevents us from conducting tests due to exposed wires, therefore, it is sold as Spares/Repairs.

Also includes the following:

- Components for the machine

- Tubing

- Pipes

- Automatic Dewpoint Meter

£ 500.00 (ex. VAT) 1 in stock

Sanyo Type MDF-U730M Biomedical Freezer Lab

ITEM-44675

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model MDF-U730M Biomedical Freezer Lab

ITEM-44674

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Edwards Rotary Vane Vacuum Pump E-Lab 2

ITEM-48564

Edwards Vacuum Pump E-Lab 2

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

ITEM-47640

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the display screen does not power on.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Sanyo Incubator Model-MIR162 Lab

ITEM-46408

Sanyo Incubator Model-MIR162 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5510E Incubator Lab Spares/Repairs

ITEM-46172

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

SLS Lab Pro INC8017 Incubator Spares/Repair Lab

ITEM-46085

SLS Lab Pro INC8017 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The incubator powers on but is in poor cosmetic condition, and emits loud noises at higher temperatures, leading to it being turned off for safety reasons.

There are structural issues as well. The wheels are broken, and the doors are misaligned, requiring them to be manually lifted to lock properly.

Due to the issues listed above, this incubator is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

3 shelves (47 x 43 cm)
Manuals
Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 Incubator - Spares/Repair Lab

ITEM-43005

Binder CB 150 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and has been successfully temperature tested, however it does not produce CO2.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder KB 240 Refrigerated Incubator Spares/Repair Lab

ITEM-42729

Binder KB 240 Refrigerated Incubator

This item was removed from a facility where it was surplus to requirement.

The unit powers on, and the screen is functional.

However, temperature settings could not be adjusted during testing, and the unit did not rise above ambient temperature when left running.

Therefore, it is listed as Spares/Repair.

Includes:

Four internal shelves

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

ITEM-42723

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

£ 500.00 (ex. VAT) 1 in stock

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

ITEM-42425

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

This item was removed from a university lab where it surplus to requirement.

It is good cosmetic condition and good working order.

£ 500.00 (ex. VAT) 1 in stock

VWR PCR Plate Centrifuge II Lab

ITEM-49516

VWR PCR Plate Centrifuge II Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 500.00 (ex. VAT) 1 in stock

Ohaus Frontier Micro Centrifuge FC5513 Lab

ITEM-49518

Ohaus Frontier Micro Centrifuge FC5513 Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40992

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40991

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.

The door seal and latch are both in good cosmetic condition.

This item includes 4 x Shelves and a Humidity Pan.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber Lab Faulty

ITEM-37811

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

It was successfully temperature tested, however, during further testing it failed to retain humidity.

Therefore, it is listed as Spares/Repair.

It has been recently fitted with a new element.

Eurotherm 220 8E controllers for temperature and humidity

Two compartments of size 65cm x 49cm x 20cm (l x w x h)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

ITEM-39716

Lab Companion IS-971R Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.

It is in good cosmetic condition with minor marks

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

ITEM-39911

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The system is faulty and requires a new controller.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C - Spares/Repair Lab

ITEM-40009

Thermo Scientific Cytomat 24 C Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The unit connects via COM port when linked to a PC running Cytomat software. (not included)

However, it does not execute commands and displays errors within the software, indicating potential internal faults.

As such, this item is listed as spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C-GR Spares/Repair Lab

ITEM-40010

Thermo Scientific Cytomat 24 C-GR Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, however, the unit has a Com port error when connected to Cytomat software.

The internal screen within the door (used for the stacker system) does not power on, and there appear to be faults affecting the stacker system overall.

As such, this item is listed as spares or repair.

Please note: Software not included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter SMS Sheath Maintenance Unit Spares/Repair Lab

ITEM-45396

Beckman Coulter SMS Sheath Maintenance Unit

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but does not power on.

Therefore, it is listed as Spares/Repair.

Specifications:-

Model: SMS Unit
S/N: 739

£ 500.00 (ex. VAT) 1 in stock

Paar DMA 35 Density Meter Kit Lab

ITEM-41972

Paar DMA 35 Density Meter Kit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

It was tested with a 9-volt 6LR61 test battery, this is not included in the sale.

The kit consists of:

1 x Density meter

1 x Sanitex Eternal-Matic 2ml filling syringe

1 x Calibration screwdriver

1 x Wrist strap

1 x Original Hard plastic carry case

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LTE Scientific Falcon 30 Benchtop Laboratory Autoclave - Spares/Repair Lab

ITEM-46403

LTE Scientific Falcon 30 Benchtop Laboratory Autoclave

This item was removed from a university lab where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. However, it failed a recent service.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Shimadzu SCL-10A, RF-551 Spectrofluorometric Detector, RF-551 S/R Lab

ITEM-47678

Shimadzu SCL-10A System with RF-551 Spectrofluorometric Detector and RF-551 Fluorescence HPLC Monitor

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in fair condition with some cosmetic wear. The accompanying PC initially worked and displayed Shimadzu Class VP software, but it now fails to boot, remaining unresponsive after shutdown.

Additionally, the previous owner stated that the system is faulty.

Therefore, it is listed as Spares/Repair.

Includes:

Shimadzu SCL-10A System Controller (Model: SCL-10A, Serial No.: 20290E)
Shimadzu RF-551 Spectrofluorometric Detector (Model: RF-551, Serial No.: 28E00028)
Shimadzu RF-551 Fluorescence HPLC Monitor (Model: RF-551, Serial No.: 070775)
Stream 56X Max PC with Windows 95 and Shimadzu Class VP Software (non-functional as described)
Acer AL511 Monitor
Viglen Keyboard
Microsoft Mouse

£ 500.00 (ex. VAT) 1 in stock

VWR LA 214 Laboratory Balance

ITEM-49530

VWR LA 214 Laboratory Balance

This item is sold on behalf of a client where it is surplus to requirements.

This item has a max capacity of 220 g with a readability of 4 decimal places. It was serviced: 05/09/2024.

It is in perfectly good condition and working order, with no significant cosmetic defects. The balance was in use in an industry laboratory up until June 2025 and was removed during a lab shutdown.

The item comes with the power cable.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.