All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

ITEM-46579

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. The casing is loose and required securing with a screw, suggesting it may have been opened previously.

The item powers on, but no further testing has been conducted. The previous owner reported it as non-functional, though the specific fault is unknown.

Therefore, it is listed as Spares/Repair.

Includes:

Pipe fittings
Grey connector box for the pipe system

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

YSI 2300 230V STAT Plus Glucose Lactate Analyser Spares/Repair Lab

ITEM-46578

YSI 2300 230V STAT Plus Glucose Lactate Analyser Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in reasonably good cosmetic condition, however, there is a missing side panel.

The previous owner had stated it is not in working order, though the reason is unknown.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220 - Spares/Repair

ITEM-46647

Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the previous owner has stated it is not in working order.

£ 500.00 (ex. VAT) 1 in stock

Fisherbrand F-UVCABMINI Mini UV Sterilization Cabinet Lab

ITEM-47444

Fisherbrand F-UVCABMINI Mini UV Sterilization Cabinet Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Manual is included.

£ 500.00 (ex. VAT) 1 in stock

Lab Armor Dry Bead Bath Model 74200-706 Lab

ITEM-48316

Lab Armor Dry Bead Bath Model 74200-706 Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The lab confirmed it was in good working order prior to removal.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific HERAfreeze ULT Freezer HFU 2185 Basic-41 Lab Spares/Repairs

ITEM-42839

Thermo Scientific HERAfreeze HFU 2185 Basic-41 -80 Ultra Low Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

The unit was described as "unreliable" prior to collection - it is sold for spares/repairs.

Specifications;

Model HFU 2185 Basic-41
Serial No. 020T-248264-0T
Capacity 572 litres

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U730M Biomedical Freezer Lab

ITEM-44673

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62 cm

14 x Containers - 62 x 31 x 16 cm

£ 500.00 (ex. VAT) 1 in stock

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

ITEM-48344

Millipore Direct-Q 3 UV Benchtop Water Purifier Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

Please note; The Cartridges and Filters require replacement as the current ones have expired.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump Spares/Repair Lab

ITEM-48347

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump – Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on; however, the previous owner has stated it is faulty, with the fault unspecified. Supplied with cables for connecting to the rest of a system, along with an Automatic Backpressure Valve (PN-900-13702-000).

Includes:

Cables for system connection
Automatic Backpressure Valve (PN-900-13702-000)

£ 500.00 (ex. VAT) 1 in stock

Ultimaker 2+ 3D Printer w/ Reel of 3DXTech PLA

ITEM-47255

Ultimaker 2+ 3D Printer w/ Reel of 3DXTech PLA

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Test video available on request.

Included;

Power Supply Cable

1 x Reel of 3DXTech PLA

£ 500.00 (ex. VAT) 1 in stock

Dudley Safes Heavy Duty Safe w/ Key

ITEM-42992

Dudley Safes Heavy Duty Safe w/ Key

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

1 x Key

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 Incubator - Spares/Repair Lab

ITEM-43005

Binder CB 150 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and has been successfully temperature tested, however it does not produce CO2.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Mixed Laboratory Equipment - Sorvall, Clifton, Hanna, Buchi, G-Storm

ITEM-44900

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-44897 Homeothermic Blanket Control Unit

ITEM-44898 Avery Berkel Weighing Scales

ITEM-44899 Sorvall Micro-Spin 24

ITEM-44902 Grass SD9 Stimulator

ITEM-44903 Clifton Unstirred Bath

ITEM-44904 2x Proteomics Units

ITEM-44905 PSU-10

ITEM-44909 Various Pipette Guns

ITEM-44911 Hanna Instruments HI 8424 Micro Computer PH Meter

ITEM-44912 Power Supply

ITEM-44913 Zerostat 3 Pipette gun

ITEM-44914 CamLab Thermometer

ITEM-44916 Bio-Rad Sub-Cell GT

ITEM-44921 VWR Digital Timer

ITEM-44922 Leica CLS 150 X Light Source

ITEM-16709 1 x (0248) Sumtronic Liycy 16x0, 22 & 1 x 02 Cervitronic YCY 16X0, 22 MM2 Cables

ITEM-44923 XBO 75

ITEM-44448 Aneroid Sphygmomanometer

ITEM-44932 Trend MiniMach

ITEM-44933 Porter Cable Heavy Duty Motor Model-86902

ITEM-44934 Metal device with parts

ITEM-44456 Jenway 3310 ph meter with stand

ITEM-44457 Jenway 3310 ph meter with stand

ITEM-44458 Jenway 3310 ph meter with stand

ITEM-44459 MSE Micro Centaur

ITEM-44460 MSE Micro Centaur

ITEM-44989 Festo MS4-LF-1/8-C-R-M

ITEM-44991 Thermo scientific Rack TT Unwire Orange

ITEM-44993 2x Hollow Fibre Cartridge

ITEM-13717 Dentsply 55-0100 Uni-GripAR Positioning Arm & Ring Dental Dentistry Lab

ITEM-44994 QSM Series QuixStand System Accessory Kit

ITEM-44968 Planer LNP 4

ITEM-45003 Agilent 1100 Series Solvent Tray

ITEM-44969 Vickers microscope

ITEM-44975 G-Storm Thermal Cycler

ITEM-44976 GeneAmp PCR System 9700

ITEM-44977 LKB Biochrom Ultrospec 4050

ITEM-44978 Leec Drying Cabinet

ITEM-44979 Heidolph MR 3002

ITEM-44980 Capex L2C Pump

ITEM-44981 VWR VMS-C7

ITEM-44982 Stuart Heat-stir SB162

ITEM-44983 Denley We Warm 1

ITEM-45104 MSE Micro Centaur

ITEM-45105 Taurus battery charger

ITEM-45106 Fisher MH-213 Balance

ITEM-45107 Fisher Stirring hotplate

ITEM-45108 Kendro Biofuge

ITEM-45014 DNA Engine DYAD Peltier Thermal Cycler

ITEM-45016 Buchi GKR-50

ITEM-45017 Buchi GKR-51

ITEM-45109 4 x Eurothermal heaters

ITEM-45110 AND EK-200i

ITEM-45111 Box of Scipette cal keys

ITEM-45112 2 x Clifton Water baths

ITEM-45020 Ozon Generator 500M

ITEM-45113 3 x Pye clocks

ITEM-45114 Bag of pipettes

£ 500.00 (ex. VAT) 1 in stock

Waters 474 Scanning Fluorescence Detector HPLC Lab

ITEM-38789

Waters 474 Scanning Fluorescence Detector HPLC

This was removed from a university lab where it was surplus to requirements.

The unit powers up and successfully self-tests its ROM, RAM, EM driver, EX driver, lamp energy are good and it reports a lamp operation of 1385.9 hours

It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260 Lab

ITEM-34897

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260

This was removed from a university lab where I was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with marks from use. The turbo fan blade moves freely and are in good cosmetic condition.

DN 100 ISO--K, 2P

Mod - Nr PM P02 130

19 pin DIN MALE connector port is in good cosmetic condition.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope Lab Faulty

ITEM-38264

ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope

This system was removed from a university lab where it was surplus to requirements.

The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs.

Cosmetic and working conditions vary as stated below each item.

ADE Phase Shift MicroXAM-100

Model: MicroXAM-100

The item is in excellent cosmetic condition and shows no signs of damage.

However, when switched on, the item does not power on.

The item includes the following components:

- Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.

- 50AT NA 0.55 885 Objective: This objective is untested.

- Phase Shift Technology Rotary Stage 4360:

Model: Rotary Stage 4360

Serial#: L56332-3021

The rotary stage is in good cosmetic condition and shows no signs of damage.

However, when switched on, it does not power on.

- Javelin Video Monitor:

Model: BWM9BX

Serial#: 7070083

The video monitor is in good cosmetic condition.

It powers on with the power light illuminated.

- Nikon Transformer and Nikon 50W AD Lamp:

Model: UN

Both the transformer and the Nikon lamp are in good condition and fully functional.

The light output can be adjusted fully.

- AD Phase Shift Controller:

Serial#: E71000-500

The phase shift controller is in good cosmetic condition.

It powers on with the power light illuminated.

Unfortunately, further testing could not be conducted.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leitz Dialux 22 Fluorescence Microscope With Camera + Control Unit Lab Faulty

ITEM-39087

Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit

This system was removed from a university lab where it was surplus to requirements.

The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp.

Due to the faults listed above, this system is listed as Spares/Repair.

The system comprises the following:

Leitz Vario Orthomat Controller
Leitz Power Supply for Lamp
Leitz Vario Orthomat 2 Camera
Leitz Wetzlar 100W Lamp (Type: 307-143.003)

5 x Objectives:

NPL Fluotar 6.3/0.20
NPL Fluotar 16/0.45
NPL Fluotar 40/0.70
Leitz EF 63/0.85
Leitz PL 2.5/0.08

2 x Leitz Eyepieces Periplan GW 10x M

Model: Dialux 22

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card Lab Spares/Repairs

ITEM-35094

Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with its cycle timer. It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle Lab

ITEM-35288

Metrohm 702 SM Titrino & 703 Ti w/ Metrodata A.701.0009 Software & Dongle

This was removed from a university lab where it was surplus to requirements.

Included are;

702 SM Titrino with remote.

The unit powers on and performs self-check.

703 Ti Stand

We were unable to locate the PSU for this unit. It was not supplied to us, so it is untested.

Metrodata software disc (A.701.0009) and accompanying dongle (6.2145.050).

£ 500.00 (ex. VAT) 1 in stock

Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM Lab

ITEM-35530

Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM

This was removed from a university lab where it was surplus to requirements.

The gate fully opens and closes, rubber seal still present. It is in good cosmetic condition with marks from use.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Ace Glass Jacketed Pressure Reaction Vessel 14cm Flange Bottom Outlet

ITEM-36059

Ace Glass Jacketed Pressure Reaction Vessel 14cm Flange Bottom Outlet

This was removed from a university lab where it was surplus to requirements.

The unit is new and shows no signs of use.

The flange at the bottom is 14cm, though there is no suggestion of the volume.

£ 495.00 (ex. VAT) 1 in stock

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

ITEM-36538

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

The units are brand new and unused.

2x Boxes of MC0HC10FS1

6x Boxes of MC0HC054H1

1x Plastic Pack of Optiscale DisposableCapsule Filters

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

ITEM-36555

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

This was removed from a university where they were surplus to requirements.

1x Yamaha RX V1500

S/N: Y066054VX

1x Extron MVX 84 VGA A

S/N: 33-1023-01 REV C

1x AMX NI-3000 Integrated Controller

1x AMX NFX-Mini

1x Universal Open Rack Cabinet with Wheels, black

1x Jamo D 6SUB

S/N: 16211050024

All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

£ 495.00 (ex. VAT) 1 in stock

Lot of HP & Agilent Chromatograph Circuit Boards Lab

ITEM-38796

Lot of HP & Agilent Chromatograph Circuit Boards

The units are untested.

Included are;

1 X HP 5890 10245-60015 Gas Chromatograph Electronic Pressure Control Board
1 X HP E2071/82341 ISA Interface Card E2073-66501 HPIB GPIB Board
2 X Agilent HP 5890A 5890 II GC ECD Electron Capture Detector Board 19233-60015
1 X Agilent HP 19257-60015 & 19257-60020 5890 Series II HPIB GPIB
1 X Berger SFC Minigram Circuit Boards STI460093684, 40200G9D6, 19257-60505
3 X HP Agilent SERIES II GAS CHROMATOGRAPH 5890 Keypad 05890-60740
2 X Agilent HP 5890 GC II 120V Single Phase Power Supply 05890-60050 Chromatograph

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Dionex P580A Low Pressure Gradient Degassing Pump Lab

ITEM-38784

Dionex P580A Low Pressure Gradient Degassing Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 490.00 (ex. VAT) 1 in stock

Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

ITEM-29830

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use.

It is supplied with;

3 x WF 10X Eyepieces.

2 x Covers.

1 x Eyepiece (no information).

1 x 10 x P Eyepiece.

1 x Spare Fuse Part No. (670.55327).

1 x Tool Part No. (019.0120.0).

1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

£ 485.00 (ex. VAT) 1 in stock

KNF Neuberger N 035 AN.18 Diaphragm Vacuum Pump

ITEM-38768

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 460.00 (ex. VAT) 1 in stock

Jeol JEM-1200 EX Pump and Pressure Tank

ITEM-39684

Jeol JEM-1200 EX Pump and Pressure Tank

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in good cosmetic condition with marks from use.

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 455.00 (ex. VAT) 1 in stock

MakerBot Replicator Model Z18 3D Printer 5th Gen

ITEM-37488

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal.

No filament spool is included.

Usage:

Print time: 188.12 hours
Mass extruded: 3.1 kg

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)

£ 455.00 (ex. VAT) 1 in stock

MotionLink Model ServoStep Rackmount Motor Driver

ITEM-43090

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

La Cimbali S39 Barsystem Coffee Machine

ITEM-47161

La Cimbali S39 Barsystem Coffee Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on. No further testing has been carried out at our facility.

Please note; The spill tray is missing.

Fitted with : Blue 16amp Plug.

£ 450.00 (ex. VAT) 1 in stock

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

ITEM-47155

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 14 in stock

Camspec M508 Spectrophotometer Lab

ITEM-46072

Camspec M508 Spectrophotometer

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. We are unable to test it further at our facility.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 450.00 (ex. VAT) 1 in stock

Olympus CK2 Inverted Phase Contrast Microscope w/ 3 x Objectives Lab

ITEM-46945

Olympus CK2 Inverted Phase Contrast Microscope with 3 x Objectives

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, and the dials for adjusting the objective level operate without issue.

However, the front dial is stuck and cannot be moved. Additionally, two of the objectives could not be removed for detailed photographs, though one was successfully detached. The microscope shows reasonable cosmetic wear consistent with prior use.

Includes:

1x Olympus LWD C A20 / 0.40 / 160/1.2
1x Olympus A10 / 0.25 / 160/0.17
1x Olympus E A4 / 0.10 / 160/–

Model: CK2

£ 450.00 (ex. VAT) 1 in stock

Fluidigm C1 Single Cell Auto Prep System Lab

ITEM-34637

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus to requirements.

The unit powers up and passes all self checks.

It is in excellent cosmetic condition with minor marks from use.

Firmware Version - 2.3-1.2-2.8-2.0

Software Version - 2.2.3.1

Chips Supported - 178;177;179;186;191

£ 450.00 (ex. VAT) 1 in stock

CWE Capstar-100 CO2 Carbon Dioxide Analyser Lab

ITEM-42655

CWE Capstar-100 Carbon Dioxide Analyser Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specification;

Model: Capstar-100
Serial No: 201128

£ 450.00 (ex. VAT) 1 in stock

Job lot of Flight Cases (Qty. 5) Airbus, LHT-HAM.

ITEM-37111

Job lot of Flight Cases (Qty. 5)

These items were removed from a University as they were surplus to requirements.

All flight cases are in reasonably good cosmetic condition, with some scuffs and scratches from general use.

All handles and clasps on the flight cases are in good working condition.

Included are the following:

Airbus Large White flight case

External Dims:

L76cm W133cm H41cm

Interior Dims

L70cm x W132cm x H36cm

LHT-HAM Long Black flight case

External Dims:

L44cm x W140cm x H39cm

Interior Dims:

L38cm x W133cm x H34cm

LHT-HAM Cubic Flight Case:

External Dims:

L71cm x W79cm x H59cm

Interior Dims:

L66cm x W75cm x H53cm

LHT-HAM Small Square flight case:

External Dims:

L37cm x W39cm x H26cm

Interior Dims:

L33cm x W37cm x H23cm

Airbus Small white flight case:

External Dims:

L25cm x W48cm x H25cm

Interior Dims:

L21cm x W45cm x H22cm

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Edwards Speedivac 2 Roughing Vacuum Pump - Rotary Vane Lab

ITEM-24513

This Edwards Speedivac 2 Vacuum Pump was removed from a university lab where it was surplus to requirements.

The pump has been professionally serviced and is in good working order. It performs to 2 x 10-1

The item is in good cosmetic condition but has marks and stains from use.

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus BB 16 Function Line CO2 Incubator Lab

ITEM-39055

Heraeus BB 16 Function Line CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.

Specifications;

Model: BB 6220 CUO2
SN: 94109551
Internal dimensions: D56 W65 H66cm
6 Doors with 6 Shelves: 50 x 26cm

£ 450.00 (ex. VAT) 1 in stock

Amersham Biosciences TE 77 PWR Lab

ITEM-41699

Amersham Biosciences TE 77 PWR

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The power supply is included.

Model: TE 77 PWR

Serial No.: 20137585

£ 450.00 (ex. VAT) 1 in stock

MakerBot Replicator Z18 3D Printer 5th Gen

ITEM-37487

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal. No filament spool is included.

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)

£ 450.00 (ex. VAT) 1 in stock

Liquid Nitrogen Tank Dewar Trolley

ITEM-46992

Dual Liquid Nitrogen Tank Trolley

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.