All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Millipore Guava EasyCyte 8HT Flow Cytometer Lab Spares/Repairs

ITEM-30464

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with only minor marks from use.

The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault.

The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed.

Guavasoft 3.1 has also been installed, which includes:

ViaCount.

InCyte (This requires an unlock code from Millipore to run).

easyCheck.

Guava Clean 3.1.

We have been able to open and close the sample tray. This proves that the system is fully connected.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

CI Electronics Sade P2 Checkweigher Weight Sorter Spares/Repair

ITEM-46233

C1 Electronics Sade-P2 Automatic Tablet CheckWeigher

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but displays a “Zero Failure” message immediately upon startup, accompanied by an alarm. This message cannot be cleared, and the unit cannot proceed to operation.

Therefore, it is listed as Spares/Repair.

It is in reasonably good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eurotherm Process Automation System with TCS Tactician T1000 & Components

ITEM-24653

Eurotherm Process Automation System with TCS Tactician T1000 & Components

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit.

We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 Lab Spares/Repairs

ITEM-30166

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit.

It is sold for Spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab

ITEM-35616

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition both internally and externally.

When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Various Sykes-Pickavant Bearing / Gear Pullers - Spares/Repair

ITEM-47407

Job Lot of Sykes-Pickavant Bearing/Gear Pullers

These items were removed from a university where they were surplus to requirement.

A large assortment of bearing and gear puller components, mostly—if not entirely—manufactured by Sykes-Pickavant in the UK. All parts appear to be in good used condition.

Please note:

We cannot guarantee that all pullers are complete.
Some extra bolts may be required to connect the legs to the pullers.
All items are housed in a built tool chest for convenient storage and transport.

Therefore, this job lot of items are listed as Spares/Repair.

Study the photos carefully for full details on included parts and condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Claude Lyons TS Voltage Stabiliser Type TS-333 S10 Spares/Repair

ITEM-42990

Claude Lyons TS Voltage Stabiliser Type TS-333 S10

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, however we are unable to power it on or test further due to the power cables being cut.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Dynamic Gastric Model (DGM) Custom Made Model Lab Spares/Repairs

ITEM-46358

Dynamic Gastric Custom Made Model

This item was removed from a university lab where it was surplus to requirements.

This custom-made Dynamic Gastric Model exhibits poor cosmetic condition. It cannot be powered on or tested due to a visual PAT failure and exposed wiring.

The Dynamic Gastric Model (DGM) is a bench-top computer controlled in vitro system that simulates digestion in the human stomach. DGM allows accurate prediction and understanding of the behaviour of foods or drug preparations within the human gut during digestion in real time.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Brema Laboratory Ice Flaker Machine Model - GB 1555 A Spares/Repair Lab

ITEM-28134

Brema Laboratory Ice Flaker Machine Model GB 1555 A

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition. However, it is leaking water due to a broken junction in the overflow-to-waste pipe.

As a result, it is listed as spares or repair.

Please note: This item was previously used in a laboratory setting and is not suitable for use in commercial catering. It should be used for laboratory purposes only.

Includes:

Operating manual

Internal dimensions: D46.5 × W67.5 × H57 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LabSystems IEMS Reader MF 1401 with Genesis Software - Spares/Repair Lab

ITEM-35860

LabSystems IEMS Reader MF 1401 with Genesis Software

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on. However, the cassette that holds the microplates in place is broken, so it cannot function as intended.

Therefore, it is listed as Spares/Repair.

Includes:

LabSystems Genesis software
Dust cover

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional G 7883 Laboratory Glassware Washer - Spares/Repair Lab

ITEM-35870

Miele Professional G7883 Laboratory Glassware Washer

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition, with a dent to the door corner and a missing front panel.

A low flow fault is present, caused by an internal component error unrelated to the water supply.

Therefore, it is listed as spares/repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Typhoon Trio+ Variable Mode Imager Spares/Repair Lab

ITEM-37335

Typhoon Trio+ Variable Mode Imager

This item was removed from a university lab where it was surplus to requirement.

It has not been tested due to exposed wiring, and is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Aeromatic Fielder MP-Micro Fluid Bed Dryer Spares/Repair Lab

ITEM-39838

Aeromatic Fielder MP-Micro Fluid Bed Dryer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on.

Therefore, we are unable to test it further at our facility, and it's listed as Spares/Repair.

The item also contains various Assembling Dryer/ Top Sprayer Containers and cables, as seen at the end of the slide.

Specifications;

Model: MP-MICRO
Serial#: 04012
Date: FEB 04

£ 500.00 (ex. VAT) 1 in stock

Packard 500TR Series Flow Scintillation Analyser D515F01 & Accessories Lab

ITEM-23476

This Packard 500TR Series Flow Scintillation Analyser was removed from a university lab where it was surplus to requirements.

The unit Powers on and is currently running 515TR BIOS version 3.11. We were unable to test it further.

It is in good cosmetic condition with only minor marks from use.

Included with it are;

1x 500TR reference manual

1x Floppy master disc FLO-ONE for windows Ver 3.65

1x External control cable

1x 24bit external control cable

1x FSA Pump retro fit kit

1x FSA 500TR Narrowbore pump Cal Instructions

2x Serial cables

1x Misc control cable

1x Flow cell LQTR 500 ul

1x Flow cell NBLQ 99 ul

1x Bag part of flow splitter 7700021

1x Bag of Homogenous option kit 7601621

£ POA 1 in stock

Gilson FC 204 Fraction Collector Lab

ITEM-46795

This item is new in stock. Please enquire for further details.

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 Incubator - Spares/Repair Lab

ITEM-43005

Binder CB 150 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and has been successfully temperature tested, however it does not produce CO2.

Therefore, it is listed as Spares/Repair.

£ 495.00 (ex. VAT) 1 in stock

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

ITEM-36538

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

The units are brand new and unused.

2x Boxes of MC0HC10FS1

6x Boxes of MC0HC054H1

1x Plastic Pack of Optiscale DisposableCapsule Filters

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Gallenkamp Digital Flame Analyser FGA-350-L w/ Lafert Air Compressor Pump Lab

ITEM-24780

This Gallenkamp Digital Flame Analyser FGA-350-L was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use. We were able to get it to produce a spark.

The lab confirmed that it was working prior to removal.

With it is;

1 x Lafert air compressor pump:

Model LM 63/4

The unit powers up but has not been tested further.

£ 495.00 (ex. VAT) 1 in stock

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

ITEM-36555

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

This was removed from a university where they were surplus to requirements.

1x Yamaha RX V1500

S/N: Y066054VX

1x Extron MVX 84 VGA A

S/N: 33-1023-01 REV C

1x AMX NI-3000 Integrated Controller

1x AMX NFX-Mini

1x Universal Open Rack Cabinet with Wheels, black

1x Jamo D 6SUB

S/N: 16211050024

All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

£ 495.00 (ex. VAT) 1 in stock

Lot of HP & Agilent Chromatograph Circuit Boards Lab

ITEM-38796

Lot of HP & Agilent Chromatograph Circuit Boards

The units are untested.

Included are;

1 X HP 5890 10245-60015 Gas Chromatograph Electronic Pressure Control Board
1 X HP E2071/82341 ISA Interface Card E2073-66501 HPIB GPIB Board
2 X Agilent HP 5890A 5890 II GC ECD Electron Capture Detector Board 19233-60015
1 X Agilent HP 19257-60015 & 19257-60020 5890 Series II HPIB GPIB
1 X Berger SFC Minigram Circuit Boards STI460093684, 40200G9D6, 19257-60505
3 X HP Agilent SERIES II GAS CHROMATOGRAPH 5890 Keypad 05890-60740
2 X Agilent HP 5890 GC II 120V Single Phase Power Supply 05890-60050 Chromatograph

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Dionex P580A Low Pressure Gradient Degassing Pump Lab

ITEM-38784

Dionex P580A Low Pressure Gradient Degassing Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 490.00 (ex. VAT) 1 in stock

Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

ITEM-29830

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use.

It is supplied with;

3 x WF 10X Eyepieces.

2 x Covers.

1 x Eyepiece (no information).

1 x 10 x P Eyepiece.

1 x Spare Fuse Part No. (670.55327).

1 x Tool Part No. (019.0120.0).

1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

£ 485.00 (ex. VAT) 1 in stock

KNF Neuberger N 035 AN.18 Diaphragm Vacuum Pump

ITEM-38768

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 1 in stock

Robins Scientific Hydra 96 Microdispenser Lab

ITEM-35101

This Robins Scientific Hydra 96 Microdispenser was removed from a university lab where it was surplus to requirements.

The unit powers up and the up/down function has been tested. It is in good cosmetic condition with marks from use.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 475.00 (ex. VAT) 1 in stock

Elga Model: PURELAB FLEX Water Purification System Lab

ITEM-34576

This was removed from a university lab where it was surplus to requirements.

We were unable to test the unit as it was not supplied with the PSU

Max Pressure: 1.5/22 Inlet.

bar/psi: 1.5/22 Working.

Elga LC197 - Biofilter fitted - Expiry Date 2020-02.

Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

£ 470.00 (ex. VAT) 1 in stock

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

ITEM-35330

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition.

The Reactivation Heater was tested to 108.8 ˚C with a digital thermometer (not included).

£ 460.00 (ex. VAT) 1 in stock

Jeol JEM-1200 EX Pump and Pressure Tank

ITEM-39684

Jeol JEM-1200 EX Pump and Pressure Tank

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in good cosmetic condition with marks from use.

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 455.00 (ex. VAT) 1 in stock

MakerBot Replicator Model Z18 3D Printer 5th Gen

ITEM-37488

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal.

No filament spool is included.

Usage:

Print time: 188.12 hours
Mass extruded: 3.1 kg

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)

£ 455.00 (ex. VAT) 1 in stock

MotionLink Model ServoStep Rackmount Motor Driver

ITEM-43090

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

Nesbit Evans & Co Therapy Bed

ITEM-43012

Nesbit Evans & Co Therapy Bed

This item was removed from a facility where it was surplus to requirement.

It is in good overall cosmetic condition.

£ 450.00 (ex. VAT) 1 in stock

Kyocera Taskalfa 2553ci Multi Functional Laser Printer

ITEM-37489

Kyocera Taskalfa 2553ci Multi-Functional Laser Printer

This item was removed from a facility where it was surplus to requirements.

It powers on and is in good working order. The printer has a total of 93,125 pages printed and is in excellent cosmetic condition.

It features standard 1200 x 1200dpi image quality, flexible paper handling from A6 to SRA3, and an intuitive 10.1-inch colour touchscreen interface.

User login details available on request.

Model: Taskalfa 2553ci

Serial No.: RFK0X33997

£ 450.00 (ex. VAT) 1 in stock

La Cimbali S39 Barsystem Coffee Machine

ITEM-47161

La Cimbali S39 Barsystem Coffee Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on. No further testing has been carried out at our facility.

Please note; The spill tray is missing.

Fitted with : Blue 16amp Plug.

£ 450.00 (ex. VAT) 1 in stock

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

ITEM-47155

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 14 in stock

Camspec M508 Spectrophotometer Lab

ITEM-46072

Camspec M508 Spectrophotometer

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. We are unable to test it further at our facility.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 450.00 (ex. VAT) 1 in stock

Olympus CK2 Inverted Phase Contrast Microscope w/ 3 x Objectives Lab

ITEM-46945

Olympus CK2 Inverted Phase Contrast Microscope with 3 x Objectives

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, and the dials for adjusting the objective level operate without issue.

However, the front dial is stuck and cannot be moved. Additionally, two of the objectives could not be removed for detailed photographs, though one was successfully detached. The microscope shows reasonable cosmetic wear consistent with prior use.

Includes:

1x Olympus LWD C A20 / 0.40 / 160/1.2
1x Olympus A10 / 0.25 / 160/0.17
1x Olympus E A4 / 0.10 / 160/–

Model: CK2

£ 450.00 (ex. VAT) 1 in stock

Fluidigm C1 Single Cell Auto Prep System Lab

ITEM-34637

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus to requirements.

The unit powers up and passes all self checks.

It is in excellent cosmetic condition with minor marks from use.

Firmware Version - 2.3-1.2-2.8-2.0

Software Version - 2.2.3.1

Chips Supported - 178;177;179;186;191

£ 450.00 (ex. VAT) 1 in stock

CWE Capstar-100 CO2 Carbon Dioxide Analyser Lab

ITEM-42655

CWE Capstar-100 Carbon Dioxide Analyser Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specification;

Model: Capstar-100
Serial No: 201128

£ 450.00 (ex. VAT) 1 in stock

Job lot of Flight Cases (Qty. 5) Airbus, LHT-HAM.

ITEM-37111

Job lot of Flight Cases (Qty. 5)

These items were removed from a University as they were surplus to requirements.

All flight cases are in reasonably good cosmetic condition, with some scuffs and scratches from general use.

All handles and clasps on the flight cases are in good working condition.

Included are the following:

Airbus Large White flight case

External Dims:

L76cm W133cm H41cm

Interior Dims

L70cm x W132cm x H36cm

LHT-HAM Long Black flight case

External Dims:

L44cm x W140cm x H39cm

Interior Dims:

L38cm x W133cm x H34cm

LHT-HAM Cubic Flight Case:

External Dims:

L71cm x W79cm x H59cm

Interior Dims:

L66cm x W75cm x H53cm

LHT-HAM Small Square flight case:

External Dims:

L37cm x W39cm x H26cm

Interior Dims:

L33cm x W37cm x H23cm

Airbus Small white flight case:

External Dims:

L25cm x W48cm x H25cm

Interior Dims:

L21cm x W45cm x H22cm

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Edwards Speedivac 2 Roughing Vacuum Pump - Rotary Vane Lab

ITEM-24513

This Edwards Speedivac 2 Vacuum Pump was removed from a university lab where it was surplus to requirements.

The pump has been professionally serviced and is in good working order. It performs to 2 x 10-1

The item is in good cosmetic condition but has marks and stains from use.

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus BB 16 Function Line CO2 Incubator Lab

ITEM-39055

Heraeus BB 16 Function Line CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.

Specifications;

Model: BB 6220 CUO2
SN: 94109551
Internal dimensions: D56 W65 H66cm
6 Doors with 6 Shelves: 50 x 26cm

£ 450.00 (ex. VAT) 1 in stock

Marrutt Film Drying Cabinet Model-36 35 Lab

ITEM-46909

Marrutt Drying Cabinet Model-36 35 Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably poor cosmetic condition, with wear and rust evident, and some bolts missing at the back of the unit, as shown.

Despite the cosmetic issues, the cabinet is in complete working order.