Z Corporation ZPrinter 450 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

In good cosmetic condition. The printer failed to power on and did not pass the PAT test.

Therefore, it is listed as Spares/Repair.

Specifications;

• Build speed: between 2 to 4 layers per minute

Build volume:

• X-axis: 8 inches (203 mm)
• Y-axis: 10 inches (254 mm)
• Z-axis: 8 inches (203 mm)
• Build capacity: 640 cubic inches
• Layer thickness:
• Minimum: 0.0035 inches (0.089 mm)
• Maximum: 0.004 inches (0.102 mm)
• Color shell thickness: 0.025 inches
• Resolution: 300 x 450 dpi
• Materials:
• Powder: zp130
• Binder: zb59
• Print heads:
• HP11 (clear binder)
• HP57 (single tricolor CMY)

Hitachi F-4500 Fluorescence Spectrophotometer System

This item was removed from a university laboratory where it was surplus to requirements.

The Hitachi F-4500 unit does not power on; however, it is in good condition with minimal wear. The previous owner said the PSU had failed.

Due to it not powering on it is listed as Spares/Repair

Includes:

• Vigen Genie P3 500 Computer
• Model: F-4500
• Serial No.: 1163-004
• Software: F-4500 FL_mnu - 2504060-05.

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

Nuaire 5810E CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

Nuaire 5800E C02 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

Thermo Scientific HERAfreeze HFU 2185 Basic-41 -80 Ultra Low Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

The unit was described as "unreliable" prior to collection - it is sold for spares/repairs.

Specifications;

• Model HFU 2185 Basic-41
• Serial No. 020T-248264-0T
• Capacity 572 litres

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.

Therefore, this item is being sold strictly as Spares/Repair.

Includes:

Beckman Allegra X-22R unit only (no rotor or accessories included)

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

• 1x Jouan AG 290.G Swing Bucket Rotor
• 4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
• 1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
• 4x 125 ml Tube Adaptors
• 4x Support Feet

Sorvall RC 28S Floor-Standing Centrifuge Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, testing could not be completed due to an on-screen error that prevented further operation, and prevented a vacuum from being drawn.

Therefore, it is listed as Spares/Repair.

Perkin Elmer Piezorray Flexible Non-contact Microarraying System Spares/Repair

This system was removed from a university laboratory where it was surplus to requirements.

The Piezorray system powers up but encounters a software error indicating a problem with the device drivers or compatibility issues when connected to the PC.

The error prevents further use and testing of the system.

Therefore, it is listed as Spares/Repair.

The system comprises the following:

• 1 x Perkin Elmer Piezorray main unit
• 1 x Enclosure, seemingly custom for the Piezorray
• 1 x Perkin Elmer Precisely Unit
• 1 x Non-branded blue and white unit
• 1 x Cole Parmer Air Admiral Pump
• 1 x Elga PURELAB UHQ
• 1 x Cole Parmer Programmable Polystat Chiller
• 1 x StockerYale IMAGELITE MODEL 20 light source with Lightpipe
• 1 x Dell Optiplex 280 PC with Windows XP OS, Perkin Elmer Piezorray software, and National Instruments Measurement & Automation software, including keyboard, mouse, and monitor

Includes:

• 3 x Tecan 731070 Syringes (used)
• 2 x Spare temperature-controlled microplate holders
• 5 x ADKH501-4PK Test Record Autodrop Pipettes (new)
• Various spare tubing

Note: Tables are not included in the sale.

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with only minor marks from use.

The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault.

The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed.

Guavasoft 3.1 has also been installed, which includes:

ViaCount.

InCyte (This requires an unlock code from Millipore to run).

easyCheck.

Guava Clean 3.1.

We have been able to open and close the sample tray. This proves that the system is fully connected.

It is sold for spares/repairs.

C1 Electronics Sade-P2 Automatic Tablet CheckWeigher

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but displays a “Zero Failure” message immediately upon startup, accompanied by an alarm. This message cannot be cleared, and the unit cannot proceed to operation.

Therefore, it is listed as Spares/Repair.

It is in reasonably good cosmetic condition.

Eurotherm Process Automation System with TCS Tactician T1000 & Components

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit.

We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit.

It is sold for Spares/repairs

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition both internally and externally.

When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

Dynamic Gastric Custom Made Model

This item was removed from a university lab where it was surplus to requirements.

This custom-made Dynamic Gastric Model exhibits poor cosmetic condition. It cannot be powered on or tested due to a visual PAT failure and exposed wiring.

The Dynamic Gastric Model (DGM) is a bench-top computer controlled in vitro system that simulates digestion in the human stomach. DGM allows accurate prediction and understanding of the behaviour of foods or drug preparations within the human gut during digestion in real time.

Brema Laboratory Ice Flaker Machine Model GB 1555 A

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition. However, it is leaking water due to a broken junction in the overflow-to-waste pipe.

As a result, it is listed as spares or repair.

Please note: This item was previously used in a laboratory setting and is not suitable for use in commercial catering. It should be used for laboratory purposes only.

Includes:

• Operating manual

Internal dimensions: D46.5 × W67.5 × H57 cm

LabSystems IEMS Reader MF 1401 with Genesis Software

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on. However, the cassette that holds the microplates in place is broken, so it cannot function as intended.

Therefore, it is listed as Spares/Repair.

Includes:

• LabSystems Genesis software
• Dust cover

Miele Professional G7883 Laboratory Glassware Washer

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition, with a dent to the door corner and a missing front panel.

A low flow fault is present, caused by an internal component error unrelated to the water supply.

Therefore, it is listed as spares/repair.

Typhoon Trio+ Variable Mode Imager

This item was removed from a university lab where it was surplus to requirement.

It has not been tested due to exposed wiring, and is sold as Spares/Repair.

Aeromatic Fielder MP-Micro Fluid Bed Dryer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on.

Therefore, we are unable to test it further at our facility, and it's listed as Spares/Repair.

The item also contains various Assembling Dryer/ Top Sprayer Containers and cables, as seen at the end of the slide.

Specifications;

• Model: MP-MICRO
• Serial#: 04012
• Date: FEB 04



This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-05085 Multi-PSU Blue Box *Unknown*

ITEM-05176 NUNC Labtop Cooler Cat: 355501 (-20 C) Scientific Laboratory

ITEM-05009 Oertling TP41 Top Pan Balance Scales

ITEM-04968 Stanton D40T Scales

ITEM-04596 Heraeus Instruments Biofuge Primo Centrifuge Damaged Lid

ITEM-10422 Brava Juice Blender

ITEM-05784 Techne Tecam TU-15 Tempunit Heater/Circulator

ITEM-05138 Microscope Handle/Stand

ITEM-03607 IKA Labortechnic hotplate and stirrer RCT Basic.

ITEM-10939 Unknown Medical Equipment

ITEM-05783 Grant Circulator Heater KA/TA for Laboratory Water Bath

ITEM-12684 Luckham Orbital Platform Shaker Rocker Mixing Lab

ITEM-14036 John Watts Type 586 Grinding Wheel Dressing Tool

ITEM-09555 Grant QBD2

ITEM-02500 Digital Data Formatting 53-150

ITEM-05479 Retro Smiths Manual Timer

ITEM-07327 Distron Geiger - Muller Counter Tube

ITEM-13055 Variomag Maxi Direct Magnetic Stirrer Lab Shaking Equipment

ITEM-08581 Digitron Model 3750TH

ITEM-14303 Ascom Digilarm Portable Digital Alarming Bell

ITEM-14189 PIFCO Vintage Electric Body Massager Personal Care

ITEM-07161 Techne Dri-Block DB-3 Dry Block Heater Laboratory Lab - Spares Repairs

ITEM-10765 Drummond Pipet-Aid Dual Pump Filtration Unit

ITEM-14032 Eclipse PS51 Piercing Saw Fixed Frame Other Tools

ITEM-09490 2 x IKA Big-squid Froggy stirrers

ITEM-13058 H.J.Latham Vintage Hair Dryer

ITEM-11722 JK KMO2 Electronics Magnetic Stirrer

ITEM-14312 Veho Discovery VMS-001 USB Microscope Stand

ITEM-13134 Pipette Stand

ITEM-12686 Grant Un-Stirred Water Bath Lab Heating Equipment

ITEM-04976 Stovall Life Science Belly Dancer

ITEM-11201 Barr & Stroud EL103 LF Power Supply

ITEM-14009 Wooden Box

ITEM-05088 PL4 Recorder JJ Instruments

ITEM-13622 1x Wesco Gren Oil Can 350cc Other Workshop Equipment

ITEM-13993 Wooden Box

ITEM-05222 Thermo Digital Series SpeedVac™ Systems Heat Laboratory Scientific *Lid Is Broke

ITEM-11091 Denley Orbital Mixer Lab Stirring Equyipment

ITEM-06569 Infrared Lamp Type HP3614

ITEM-04321 fisherbrand stirrer

ITEM-11032 4x Rank Bros 100 Electronic Stirrer Control Lab Shaking Equipment

ITEM-08321 Stuart Scientific SB1 Blood Tube Rotator

ITEM-11401 2x Anatune CF-100 Benchtop Laboratory Centrifuge Vortex Robotic

ITEM-10505 Race Pedal Joy Stick IT Equipment

ITEM-04287 Job lot of 3 blood glucose monitoring system

ITEM-08323 MULTI-JOB LOT 2 pipettes

ITEM-10657 Amazon.ca Salton Vacuum Bag Sealer

ITEM-03116 Job Lot of 4 x Faulty H R Flow Inducer MHRE 4 and MHRE 100

ITEM-06311 Corning PC-351 Hot Plate Stirrer Laboratory Heating Mixing - Spares Repairs

ITEM-11287 Harvard R150424 Thermo-Circulator Controller

ITEM-05971 Mettler Toledo PL3000 Laboratory Precision Digital Balance Scales

ITEM-10534 Fisher Scientific LABOSI Power 300 Electrophoresis Power Supply

ITEM-06534 Hybaid PS 250 Electrophoresis Power Supply

ITEM-06906 Ohaus Dial-O-Gram Balance 310g Capacity Scales

ITEM-10259 Unbranded Vintage Weighing Pan Balance

ITEM-02436 Selector Unit 1694 F

ITEM-12203 Electrothermal Cat. M106 Heating Mantle Lab Heating Equipment

ITEM-06006 Developing Health Technology Portable Haemoglobin Analyzer DHT Hb 523

ITEM-12290 Electrothermal EMO100 Heating Mantle Lab Heating Equipmet

ITEM-11905 Sarstedt M-Sarpette Manual Pipette With Gilson Distriman

ITEM-12663 Single Stage BS5741 Single Gauge Regulator

ITEM-06102 Thorn DFLD 400 Lamp

ITEM-12198 Electrothermal Heating Mantle Size 950ml Lab Heating Equipment

ITEM-12205 Electrothermal EM2000/CE MK5 Heating Mantle Lab Heating Equipment

ITEM-10537 Biolab pH & Conductivity Meter Lab Equipment

ITEM-06045 Reliance Electric Gast Vacuum Pump - Faulty

ITEM-12155 GallenKamp HotPlate Magneic Stirrer Cat.SWT-315

ITEM-09248 ChemLab SS3H Hotplate Laboratory Stirrer & Digitron Meter Spares Repairs

ITEM-12175 MK V Orbital Shaker [condition: Used]

ITEM-04703 Mettler P1210 Laboratory Scale 1200G Max d=10mg Tara 0-100g

ITEM-07117 JJ Instruments Chard Recorder (Spares & Repairs)

ITEM-06089 Stuart Scientific S.M.3 Magnetic Stirrer Hotplate

ITEM-12168 Stuart Scientific Mini Orbital Shakers Lab Shaking Equipment

ITEM-06017 Syringe Pump

ITEM-07133 Mettler Toledo pH Meter - Spares / Repairs

ITEM-10533 IKA Laboratories RH Basic Stirrer Lab Shaking Equipment

ITEM-10698 Grant BT3 Block Heater Lab Heating Equipment

ITEM-10746 Voss of Maldon MAG/S 200/250 Magnetic Stirrer Lab Shaking Equipment

ITEM-10924 Fisher Brand Pump Lab Equipment (Spare Repairs)

ITEM-06172 Elix 2 Millipore Water Purification System

ITEM-06046 VWR Digital Thermometer

ITEM-04758 Laboratory Glass Filter Tube

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

New Brunswick Innova U725-G Ultra Low Temperature Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it failed to drop below 2ºc when set to its minimum of -86ºc.

Therefore, it is listed as Spares/Repair.

Specifications;

• Model U725-86G
• Capacity 727 litres
• Serial No. 1016-0976-1111