Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

• 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
• Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
• Reflector modules: DAPI, FITC, TRITC, empty

• 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
• Position 1: empty
• Position 2: 424228-9060 0.05T Neutral density filter 0.05
• Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
• Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
• Position 5: empty

• 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

• 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

• 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

• 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

• 1 x Camera adapter 60N-C 2/3" 0.5x (426112)

• 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

• 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

• Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

• 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

CTI Cryogenics Cryo Torr 8 High Vacuum Pump w/ 8001 Controller & SCW Compressor

This was removed from a university lab where it was surplus to requirements.

The Cryo pump is in excellent cosmetic condition but the rest of the system is in good to reasonable condition. It was in full working order when last used.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

This was removed from a university lab where it was surplus to requirements.

Included are;

Gilson 268 Pipetmax

Model no. 32100001

SN - 321D6A042

Unit dimensions - L63 W52 H70cm

The item powers on and is in reasonable used cosmetic condition, there are a few cracks around the unit on the perspex covers.

Windows Tablet

Model no. 32000321

SN - 66MCV22

The tablet automatically starts up Gilson Trilution Software. We have the password available on purchase.

Gilson Model GCP Dell Doc

SN - G00M-A00

3 x Gilson Dongles:-

LT3204USB PIPETMAX Docs v2 Reference Docs 1.1

LT3203USB TRILUTION micro V2 Documentation v1.2

Blue Dongle labelled Trilution

Gilson 5mm Allen Wrench (4320502)

AC Power Adaptor

Consumables:-

6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 50μl (15 x 96 Tips in Racks) Full & Sealed inside

1 x Box of Eppendorf epT.I.PS. Motion 1 - 50μl (10 x 96 Tips in Racks) 9 Sealed inside

6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 20-300μl (15 x 96 Tips in Racks) Full & Sealed inside

1 x Box of Eppendorf epT.I.PS. Motion 1 - 20-300μl (11 x 96 Tips in Racks) Sealed inside

16 x Boxes of Gilson DL10 Diamond Reload Packs (960 Tips per box Volume Range 0.1 - 20μl)

1 x Box of Gilson DL10 Diamond Reload Packs (257 Tips in box Volume Range 0.1 - 20μl)

18 x Boxes of Gilson DL200 Diamond Reload Packs (960 Tips per box Volume Range 2 - 200μl)

1 x Box of Gilson DL200 Diamond Reload Packs ( 192 Tips in box Volume Range 2 - 200μl)

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU

This was removed from a university lab where it was surplus to requirements.

The lab it was removed from confirmed it was in working order prior to removal but were unable to supply the software.

All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included.

The system is in good cosmetic condition, but the rubber foot ends are crumbling.

There is no software included with the system.

Items included:

Main Units:

Olympus Lext OLS3100

Dimensions: 464(W)x559(D)x620(H)mm

Weight: 56.5kg

Olympus MM6-ASPS Controller

Dimensions: 381(W)x304.8(D)254(H)mm

Weight: 14.33kg

Olympus OLS3000 Power Supply

Dimensions: 355.6(W)x177.8(D)355.6(H)mm

Weight: 9kg

Accessories:

Olympus U-DICR

Olympus U-P03

Olympus U-AN360-3

BioMerieux Chemunex Chemscan RDI Advanced Flow Cytometer

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use.

There is a joystick and a keypad supplied.

There is no PC or software included.

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System

This system was removed from a university lab where it was surplus to requirements.

The microscope is in working order, but we have not tested the laser due to safety restrictions at our site.

There are no objectives fitted.

Items included are:

-Zeiss LSM Control S/N- 000260

-Hal 100 Lamp

-Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07

-Zeiss HBO 100W

-Zeiss HBO 100W/2

-Zeiss Lasermodul UV

-Fujitsu Siemans mouse

-Relevant manuals and guides

-Connection cables

-Comms PCi Cards & Dongle (non USB)

This DVS Water Vapor Sorption Analyzer System was removed from a university lab where it was surplus to requirements.

The system powers on and is in good cosmetic condition. The system was tested with a digital thermometer (not included), but has not been tested further.

System includes:

CAHN DVS-1

CAHN Digital Recording Balance D-200

DVS Surface Measurement Systems

Nikon D-Eclipse C1 System With Melles Griot Accessories

This system was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further for safety reasons.

Included are the following;

Nikon D-Eclipse C1-LU3EX

Melles Griot 35-IMA-840-019

Melles Griot 05-LHP-991

Melles Griot 56ICS/S2695

Melles Griot 25-LGP-193-230

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab

This system was removed from a university lab where it was surplus to requirement.

Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility.

Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware.

Nucleocounter C-200

Serial No. 9000201112003520

Lenovo Thinkpad T15 laptop

Windows 10 operating system

Serial No. PF-2J1PMV

Also includes the following:

Included:

2 x Low-voltage power supplies

1 x Data lead

Large VacGen Vacuum Tank & Beam Tube with VAT Gate Valves.

This was removed from a university where it was surplus to requirements.

The lab confirmed that all the equipment is in excellent functional condition and has been housed in a clean room lab for the full lifetime.

Tank Dimensions: L 136cm x W 126cm x H 260cm.

Tank is fitted with 6 openings.

3 x 65cm x 65cm.

2 x 10cm x 10cm.

1 x 15cm x 15cm.

Beam Tube Dimensions: L 450cm x W 81cm x H 81cm.

Opening 65cm x 65cm.

2 x Gate Dimensions: L 100cm x W 24cm x H 183cm.

Opening 65cm x 65cm.

Fitted with SMC Solenoid valves Model: VF3143.

Three studs have been snapped off in one of the Gate valves.

Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab

This enclosure was removed from a university where it was surplus to requirement.

This listing is the enclosure only and does not include the tables it sits on. Refer to the red highlight featured on the diagram.

It originally housed a Thermo Scientific™ Spinnaker™ Microplate Robot System which is not included.

The measurements for the assembled enclosure are as follows:

Length x 448cm

Width x 152cm

Height x 118cm

This item includes various brackets and fixings as seen, but we are unable to confirm if all the required items are included.

This Oxford Instruments OptistatDN Nitrogen Bath Cryostats from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition, but due to the nature of the item we are unable to test it.

Shimadzu PSSM-8 Peptide Synthesizer w/ Memory Key, System Disk & Accessories Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition internally and externally.

It powers with the arm moving in the X/Y Axis using the onboard control panel, we are unable to test it further at our facility.

Included are the following:

Shimadzu PSSM-8 Peptide Synthesizer

Model: PSSM-8

Serial#: 310059

PSSM-8 Memory Card

Part#: 292-05230

PSSM-8 System Disk

Part#: 292-05108

Shimadzu BMD-1 Memory Card Drive

Model: BMD-1

Serial#: 310059

PSSM-C8 Cleavage Purge Unit

Shimadzu Needle

Part#: C 228-20243-94

Millex-LS syringe Driven Filter Unit

Part#: SLLS 025 NS

Shimadzu PSSM-8 Instructional Manual

This Flir Systems ThermaCam SC500 194 780 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition minor with marks from use, we are unable to test it further at our facility.

Included are the following:

Flir Systems PC Card Interface

P/N: 194 240

S/N: 2030068

HiTRON 13.5 volt Power Supply

M/N: HES61-11B

S/N: 0165

Flir Systems Break Out Box

P/N: 194 257

S/N: 3300066

This Pall GeneDisc Cycler Real-Time PCR Platform for Pa was removed from a university lab where it was surplus to requirements.

The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility.

The item carried out self-checks on start-up.

Included with the item:

Delta Electronics 12-volt Screen Power Supply

Wheaton 6-Tier Roller Apparatus Cat No 348970CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver.

It is in good cosmetic condition with minor marks

Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

GE AKTA Purifier 10 FPLC System – P-900, UPC-900, Box-900, M-925, PV-908, INV-907

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and in good working order.

Please note: It is missing tubing and the CU950 interface module for PC connectivity.

Included components:

GE AKTA P-900 Pump

• Model: P-900
• Serial No.: 1358382
• Code No.: 18110856

GE AKTA UPC-900 Detector

• Model: UPC-900
• Serial No.: 1359309
• Code No.: 18112895

GE AKTA Box-900

• Model: Box-900
• Serial No.: N/A

GE AKTA M-925 Mixer

• Model: M-925
• Serial No.: N/A

GE AKTA PV-908 Valve

• Model: INV-908
• Serial No.: 1352513

GE AKTA INV-907 Valve

• Model: INV-907
• Serial No.: 1355914

Leica Type DM6000B Upright LED Fluorescence Microscope with Motorised Stage

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on and components respond as expected. The touchscreen, motorised stage, turret, and lighting were all functional during basic checks. The Kubler timer display on the Leica fluorescence unit is not working, which is a common fault.

Includes:

• Leica DM6000B microscope (without original objectives)
• Leica CTR 6000 controller
• Leica EL6000 fluorescence light source
• Leica Remote Controller for focus and turret
• Leica 507808 HC Plan S 10X/125 eyepieces (pair)
• MBF Bioscience CX9000 camera (original, left with the system)
• MBF stage joystick
• 6x data cables
• 1x AmScope 10.0MP High Speed CMOS Colour Camera with software
• 1x Lenovo Thinkpad T14S Gen 1 / 256GB SSD / 16GB RAM / Windows 11
• 6x AmScope Achromatic Objectives: 4x, 10x, 20x, 40x, 60x, 100x

Model: DM6000B

Serial No.: 315568

CTI-Cryogenics 9600 Compressor With Auto Transformer SKE 331-3

This system was removed from a university laboratory where it was surplus to requirements.

The CTI-Cryogenics 9600 helium compressor is supplied with an SKE 331-3 auto transformer, used to step down a 440V US 3-phase input to 220V suitable for the compressor.

The compressor features a dropped phase detector and will not operate unless all three input phases are present and correctly aligned. A cold head is required for operation (not included) and can be sourced separately. Replacement of the compressor adsorber is recommended as part of routine servicing.

 The helium loop is still pressurised, and so is unlikely to have been contaminated

This system must be installed and wired by a qualified electrician. The unit was confirmed to be working prior to removal, but needs wiring up.

Includes:

• CTI-Cryogenics 9600 Compressor
• Auto Transformer SKE 331-3

Life Technologies Ion Torrent System - Proton Semiconductor Sequencer & Ion Chef

This system was removed from a university where it was surplus to requirements.

All included units are in good cosmetic condition and power on, we are unable to test them further or as a system at our facility.

The previous owner stated it was in working order when last in use.

System includes;

Ion Torrent Proton Semiconductor Sequencer

• Model - Proton Semiconductor Sequencer
• S/N - 245644-0717

Comes with Ion Torrent P1 - DA003572

Ion Torrent Ion Chef Instrument

• Model - IONCHEF
• S/N - CHEF00212

Ion Torrent Ion OneTouch 2

• Model - Ion OneTouch 2 Instrument
• S/N - 2456450-2447

Ion Torrent Ion Touch ES

• Model - 8441-21
• S/N - 423928

Ion Torrent Ion Chip Minifuge

• Model - Ion Torrent Ion Chip Minifuge
• S/N - 1212 0929

Accessories

• Dell PowerEdge T620 Server
• 3 x wash bottles
• Honeywell Scanner
• 2 x Ion Chip 316

AKTA Purifier System with pH/C-900, UV-900, P-900, Box-900, and Frac-900

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear. No further functional testing has been conducted.

The system comprises the following modules:

• AKTA Purifier
• Serial No.: 56303327 KD 001769
• System No.: 18140000 001654

• pH/C-900
• Model: pH/C-900
• Serial No.: 56118981 KD 003619

• UV-900
• Model: UV-900
• Serial No.: 56119689 KD 003743

• P-900
• Model: P-900
• Serial No.: 56600001 KN 002409

• Frac-900
• Model: Frac-900
• Serial No.: 56303949 KD 004222

Synrad Firestar Series Ti FSTI80KFC Laser

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It has not been powered on due to testing limitations with Class 3 and above lasers at our facility.

No further testing has been performed.

Includes:

Synrad UC-200 Laser Controller

Model: UC-2000

Serial No.: UC20236052176

Scanlab HurryScan II 14 Galvanometer Scanner

Typ: HurryScan II 14

Serial No.: 307930

Logitech Attack 3 Joystick

Professional 2-Port USB to RS-232 Serial Adapter

Sky Tronic 5A Professional DC Regulated Power Supply

Model: 650.654UK

2 x Mean Well SP-100-15 Power Supplies

Mean Well RSP-1500-48 Power Supply

Foster + Freeman MVC3000 Fuming Cabinet

This item was removed from a university lab where it was surplus to requirements.

The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.

Therefore, further testing could not be conducted.

There is no filter fitted, the unit should work fine with one in.

Specifications:

• 1 Shelf: 74 x 58 cm
• 2 Baskets: 57 x 30 x 15 cm
• Underneath space: 75 x 64 x 32 cm

Model: MVC3000

Serial No: 3175

Hudson Solo SOL9 Liquid Handler

This item was removed from a university lab where it was surplus to requirements.

The robot is in very good used condition and has been successfully tested for communication with the included

software.

The previous client has confirmed it being in working order.

System Includes:

• 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU)
• 4 x 10cm Tall Nests
• 2 x 6cm Tall Nests
• 1 x 4.5cm Nest
• 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units:
• 1 with a TPS 620-5033 plate
• 1 with a TPS 620-5045 plate
• 2 x PSU's
• 1 x BioShake Heated Shaker Plate (marked as faulty)
• 2 x Boxes of 1000ul Pipette Tips (all sealed inside)
• 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed
• 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Zeiss Axiovert 200M Fluorescence Microscope

This system was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in full working order, however we recommend it be cleaned internally and be serviced once purchased.

This microscope consists of the following:-

• Zeiss Axiovert 200M Body

Model: 1005-820

• HAL 100 Halogen Lamp

Model: 44 72 19 1039-685

• Carrier for Transmitted Light Illumination

Model: 1005-840

• LCD Display

Model: 1071-167

• Polarizer D (Rotatable)

Model: 1121-813

• LD Condenser 0.55

Positions: H, Ph1, Ph2, Ph3, DIC, DIC

Model: 1005-847 (DIC Prisms not fitted)

• Manual Stage with Universal Mounting Frame K

Frame Model: 451352

• 5-Position MOT Reflector Turret

Model: 1064-365

Filters:

• Fs 02
• Fs 10
• Fs 15 (1046.281)
• Fs 31 (1046.281)
• One unknown filter (slot shows as "empty" but contains a cube)

• HBO 100 Mercury Lamp

Model: 1007-980

• Includes FluoArc PSU (light in power switch does not work, but functionality unaffected).
• Model: 434-355
• (Run hours of the lamp are unknown.)

• Binocular Tube 45º/23

Model: 1005-827

• Fitted with W-Pl 10x/23 Eyepieces
• Model: 1016-758

• FL Incident-Light Equipment

Model: 1066-230

• Includes:
• Adjusting Aid for HBO (Model: 452369)
• 2 x Iris Stop Sliders (Model: 1062-360)

• Objective
• Zeiss Plan-NEOFLUAR 20x/0.50
• Model: 1004-072

Mettler Toledo Garvens 2 VS Checkweigher

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Wyatt Technology DynaPro DP-TH-01 Titan & DP-AMB-01 Microsampler

This system was removed from a university lab where it was surplus to requirements.

Both units are in good cosmetic condition and power up.

However, full functionality testing requires connecting to a PC with specific software, which is not included.

The previous owner has stated it was in good working order prior to removal.

Includes:

• USB cable
• DVI cable

Model Numbers:

• Titan: DP-TH-01
• Serial Number: 111-DPTH
• Laser Power (mW): 60
• Wavelength (nm): 828.98

• Microsampler: DP-AMB-01
• Serial Number: 104-DPAMB

Priorclave PS/MID/C60 Top-Loading Autoclave

This autoclave was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. The previous owner has stated it was in good working order prior to removal.

Includes:

• Key

Holmarc Opto-Mechatronics Spray Pyrolysis Equipment Model HO-TH-04N

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, and the heated plate was successfully tested, reaching a maximum temperature of 500˚C. No further functional testing was conducted.

In reasonable cosmetic condition, with some tape residue present around the casing.

Includes:

• Integrated Holmarc Spray Pyrolysis Controller
• Serial No.: HSMC104
• (Powers on via internal socket)
• Airsa Model AFP11-3D Fan (not fitted)
• Metal part labelled 'Container' (connects to left side of unit)
• Glass chamber with pump fittings (rust present on metal parts)
• Blue hosing

Model: HO-TH-04N

MVE TEC 3000 800 Series -190°C Cryogenic Freezer with Controller

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in reasonably good cosmetic condition. No further testing was possible as it requires liquid nitrogen to operate.

Includes:

• Step access platform
• MVE TEC 3000 guidance manual
• 12 x internal storage racks (each approximately 14 cm (L) x 14 cm (W) x 87 cm (H))

Model: TEC 3000

Temperature Range: Down to -190°C

Thermo Elemental Model Type Solaar S2 AA Series Spectrometer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Includes:

• Rubidium Data Coded Hollow Cathode Lamp (NC 9423 390 30371)

GE Healthcare ÄKTA System with Workstation and Software

This system was removed from a university laboratory where it was surplus to requirements.

All units are in good cosmetic condition and power on, we are unable to test the system further at our facility.

The Lenovo Thinkstation PC has Unicorn 5.01 and MassLynx V4.2 software installed and functioning correctly.

The system comprises the following:

Amersham Biosciences UV-900

Model: UV-900

Serial No.: 01148619

Amersham Biosciences P-900

Model: P-900

Serial No.: 01146904

Amersham Biosciences INV-907

Code No.: 18-1108-40

Serial No.: 01147887

Amersham Biosciences M-925

Code No.: 18-1118-89

Serial No.: 01146475

Amersham Biosciences CU-950

Serial No.: 2448

Lenovo Thinkstation PC with:

Unicorn 5.01

MassLynx V4.2

Keys included

NEC 17" Monitor

NEC Keyboard and Mouse

Amersham Biosciences pH/C-900 Monitor (Passed calibration)

Thermo Scientific Class 2 Safe 2020 1.2 Biological Safety Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in complete working order. (Socket tester not included.)

The lab reported it was in good working condition prior to removal

Please note; There is no filter fitted.

Infors HT Minitron Co2 Shaking Incubator w/ Humidity (2018)  

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in complete working order

Melles Griot Anti-Vibration Isolation Table with 4 Isolating Legs Lx244 Wx126 Hx91

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and remains untested.

Includes:

• 4 x Melles Griot Isolating Legs, Part No. 070T1055

Specifications:

• Dimensions: Lx244 Wx126 Hx91 cm
• Measurement: Imperial

Please note: Sockets and 3-phase cable/plug shown in the first two images are not fitted or included.

Nanosight LM10 Nanoparticle Analyser with CMOS Camera and LM14 Laser Stage

This item is sold on behalf of a client where it is surplus to requirements.

It is in good overall condition and in good working order, with the unit powering on and including all required components for operation.

The unit was originally purchased new, with the glass stage later replaced by the manufacturer. No further service history is recorded.

Includes:

• PC, monitor, keyboard, and mouse
• NTA software pre-loaded on the PC

The seller can package the system for transport.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Thermo S4 S Series AA Spectrometer System, with VP 100 and ASX-520

This was removed from a university lab where it was surplus to requirement.

All elements of the system power up and are in reasonably good cosmetic condition with minor marks. The lab confirmed it was in working order when last used.

Included are;

1x Thermo S Series AA Spectrometer

P/N: 9423 400 30041

S/N: GE711747

1x Thermo VP 100 Vapour System

P/N: 9423 460 10001

S/N: GE 604091

1x Cetac ASX-520 Auto Sampler

S/N: 100520A520

Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor System

This system was removed from a facility where it was surplus to requirements.

All components are in good used cosmetic condition.

The system comprises a benchtop bioreactor controller, vessel, weighing platform, and data recording unit, supplied with a manual.

Includes:

• Cytiva Xcellerex XDR-10 MASTER MAX Benchtop Bioreactor Controller
• Cytiva Xcellerex XDR-10
• Mettler Toledo PBA655-B60 Weighing Platform
• JUMO Logoscreen 600
• Manual

In good used cosmetic condition.

The lab confirmed that the system was in good working order prior to removal.

Amco Modular Enclosures Cabinet with SVT Associates MBE Modules

This system was removed from a university lab where it was surplus to requirement.

The cabinet contains five modules that were previously part of an SVT Associates Molecular Beam Epitaxy (MBE) system.

The system comprises the following:

• Oerlikon MAG DRIVE Digital module (includes manual, in German)
• Module labelled "Effusion Cell Controller" – SN: 530909192005
• Module – SN: 530908092005 (only module confirmed to power on)
• Module labelled "Gate Valve Controller"
• Another module labelled "Effusion Cell Controller" (would fail a PAT test due to missing panels exposing internal components)
• 1x Keys

Additional details:

• Approx. module space width: 44 cm
• Internal extension sockets are fitted for American-style plugs
• Includes a large number of various internal cables

Cryomagnetics Inc 12T Horizontal Superconducting Magnet with CS-4 & LM-500

This system was removed from a university laboratory where it was surplus to requirements.

It is a 12T horizontal superconducting magnet with a 120mm diameter bore. The magnet features a high homogeneity central region, previously used for FT-ICR mass spectrometry measurements, and is also suitable for small-scale MRI applications. It is actively shielded with a low fringe field and incorporates a liquid helium cooled coil with an outer liquid nitrogen shield dewar.

The previous owner stated it is in full working order. The system has been refilled and maintained continuously over its lifetime with no issues and no quenches outside of training during charging.

Please note; The weight (2500kg) is approximate.

Includes:

• Magnet, discharged state (run down in 2023), flushed with nitrogen gas
• Manufactured ~2009, installed at university by Cryomagnetics soon after
• Run down and moved once in ~2010
• Insulation under vacuum
• All seals and burst discs intact and ready to use
• Instruction manual (paper)
• Cryomagnetics Inc Model CS-4 Bipolar Superconducting Magnet Power Supply 115v (Serial No: 3166)
• Cryomagnetics Model 4G Superconducting Magnet Power Supply Operating Instruction Manual for the 4G Magnet Power Supply
• Cryomagnetics Inc Liquid Cryogen Level Monitor Model LM-500 (Serial No: 3742)

Edinburgh Instruments Time-Correlated Single Photon Counting System

This system was removed from a university lab where it was surplus to requirements.

Although all units successfully powered on, we cannot test it completely at our facility.

Condition varies as stated below each item.

The system includes the following components:

Edinburgh Instruments Spectrometer System

Serial#: 178

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller & PC with Software. The following tests were conducted:

1. Excitation Mono Successfully Initialised

2. Emission1 Mono Successfully Initialised

3. Excitation Polariser Successfully Initialised

4. Emission1 Polariser Successfully Initialised

5. Sample Holder Temperature Successfully Read

6. nF Iris did not initialise (nF Iris Cable present but unable to find port)

7. TAC Range & Scaler Successfully Initialised

All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device.

Additionally, the system includes:

Edinburgh Instruments Nanosecond Flashlamp Head

Model: nF900

Serial#: 095

Mfd: 03/2000

The item is in good cosmetic condition and pairs successfully with the Spectrometer System.

Edinburgh Instruments nF900 Controller

Model: nF900

Serial#: 092

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Edinburgh Instruments CD900 Controller

Model: CD900

Serial#: 112

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard & Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

Atas GL Focus Robotic Sample Processor System

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered on, we are unable to test further at our facility.

The system comprises:

1x ThermoQuest Finnigan Polaris turbo pump controller

1x GCQ Gas chromatograph

Serial#: 950208

1x GCQ Mass Spectrometer

Serial#: 200065