Commercial, IT and Miscellaneous

£ 700.00 (ex. VAT) 1 in stock

Sound Engineering Rack with Mixing Modules TDT Tucker Davies Technologies Lab

ITEM-44972

TDT Tucker Davis Technologies Audio Processing System

This system was removed from a university lab where it was surplus to requirements.

All units power on but have not been tested further. The system includes a number of cables.

Modules (Front, Top to Bottom):

System ID 3035

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

System ID 2901

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

Back Units:

Daxten Scout Combo
Parasound Zamp v.3 Zone Amplifier

All items are in good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Axon-Instruments Axoclamp-2B Microelectrode Current And Voltage Clamp

ITEM-47099

Axon-Instruments Axoclamp-2B Microelectrode Current And Voltage Clamp

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface

ITEM-37730

Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface

This system was removed from a university lab where it was surplus to requirements.

All units are in good cosmetic condition.

The Newtek Tricaster TCXD455 Cs Multistandard Switcher and Keyboard power on and communicate successfully, there is no operating system installed as there is no HDD. For this reason, the control surface could not be tested.

£ 680.00 (ex. VAT) 1 in stock

Kaiser Multigrade VPM-6005 Enlarger w/ Transformer & VIPONEL E 01 L Timer

ITEM-50068

Kaiser Multigrade VPM-6005 Enlarger with Transformer & VIPONEL E 01 L Timer

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition. All filters function correctly and adjustment movements are smooth. When raised to height, the enlarger head does not reliably stay in position and has dropped a few times, likely requiring tightening or realignment. No further testing has been carried out.

Included Components:

Kaiser Multigrade VPM-6005 Enlarger

Transformer

Meopta VIPONEL E 01 L Timer

£ 675.00 (ex. VAT) 1 in stock

Kaiser Multigrade VPM-6005 Enlarger w/ Transformer, Easel & VIPONEL E01L Timer

ITEM-50067

Kaiser Multigrade VPM-6005 Enlarger with Transformer, Easel & VIPONEL E01L Timer

This item was removed from a facility where it was surplus to requirements.

It powers on and is in good overall cosmetic condition.

All filters function correctly and adjustment movements are smooth. When raised to height, the enlarger head does not reliably stay in position and has dropped a few times, likely requiring tightening or adjustment.

Included Components:

Kaiser Multigrade VPM-6005 Enlarger
Transformer
Meopta VIPONEL E01L Timer
Easel

£ 660.00 (ex. VAT) 1 in stock

Kaiser Multigrade VPM-6005 Enlarger w/ Transformer & VIPONEL E 01 L Timer

ITEM-50081

Kaiser Multigrade VPM-6005 Enlarger with Transformer & VIPONEL E 01 L Timer

This item was removed from a facility where it was surplus to requirements.

It is in good general cosmetic condition. All filters work correctly, and adjustment controls move smoothly. When raised to height, the enlarger head struggles to stay in position and has dropped a few times, likely needing tightening or adjustment. No further testing has been carried out.

Included Components:

Kaiser Multigrade VPM-6005 Enlarger

Transformer

Meopta VIPONEL E 01 L Timer

£ 650.00 (ex. VAT) 1 in stock

Kaiser Multigrade VPM-6005 Enlarger w/ Transformer, Easel and VIPONEL S15 Timer

ITEM-50058

Kaiser Multigrade VPM-6005 Enlarger with Transformer, Easel & VIPONEL S15 Timer

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on. All filters function correctly and adjustment controls operate smoothly. However, the enlarger head struggles to remain in position when raised to height, likely requiring tightening or adjustment. No further testing has been carried out.

Included Components:

Kaiser Multigrade VPM-6005 Enlarger
Transformer
Meopta VIPONEL S15 Timer
Easel

£ 600.00 (ex. VAT) 1 in stock

Zeiss Ikon Favorit 16B 16mm Cinema Projector System with Arc/Xenon Lamp Setup

ITEM-55846

Zeiss Ikon Favorit 16B Cinema Projector System w/ Westinghouse Rectifier & Xenosol II S/R

This system was removed from a facility where it was surplus to requirement.

it has not been tested.

Includes;

Zeiss Ikon Favorit 16B Projector Head
Westinghouse Rectifier R13195 (SN: 9189021)
Xenosol II 23-33 (FN: 1589)
2 x Projection Lenses / Attachments (T50 F.6 Milano)

£ 600.00 (ex. VAT) 1 in stock

Raise 3D Pro 2 Plus 3D Printer w/ PLA Spool White

ITEM-54747

Raise 3D Pro 2 Plus 3D Printer w/ PLA Spool White

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

The previous owner states the units were operational, though some may require minor repairs, component replacements, and routine maintenance.

Includes;

PLA 1.75mm White A8033 spool

£ 595.00 (ex. VAT) 1 in stock

Raise 3D Pro 2 Plus 3D Printer w/ PRIMAVALUE Spool Light Grey

ITEM-54751

Raise 3D Pro 2 Plus 3D Printer w/ PRIMAVALUE Spool Light Grey

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

The previous owner states the units were operational, though some may require minor repairs, component replacements, and routine maintenance.

Includes;

PRIMAVALUE spool:

PLA
Diameter: 1.75mm
Colour: Light grey
Weight: 1kg
EAN: 7340002102511

£ 590.00 (ex. VAT) 1 in stock

Raise 3D Pro 2 Plus 3D Printer w/ PLA Filament Spool Deep Black

ITEM-54749

Raise 3D Pro 2 Plus 3D Printer w/ PLA Spool White

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

The previous owner states the units were operational, though some may require minor repairs, component replacements, and routine maintenance.

Includes;

Copymaster 3D
PLA
Deep Black
1.75mm
1kg
190-220˚C

£ 560.00 (ex. VAT) 1 in stock

Raise 3D Pro 2 Plus 3D Printer

ITEM-54748

Raise 3D Pro 2 Plus 3D Printer

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

Please note: There is no filament spool included.

The previous owner states the units were operational, though some may require minor repairs, component replacements, and routine maintenance.

£ 555.00 (ex. VAT) 1 in stock

Raise 3D Pro 2 Plus 3D Printer

ITEM-54746

Raise 3D Pro 2 Plus 3D Printer w/ PRIMAVALUE Spool Light Grey

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

Please note: There is no filament spool included.

The previous owner states the units were operational, though some may require minor repairs, component replacements, and routine maintenance.

£ 550.00 (ex. VAT) 1 in stock

Bunn SINGLE TF DBC BrewWISE Commercial Coffee Brewer

ITEM-50365

Bunn SINGLE TF DBC BrewWISE Coffee Brewer

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition. During testing, the unit powered on using a 16A blue (IEC 60309) plug (since removed).

No further testing has been conducted as the brewer requires connection to a water supply to verify full operation.

£ 550.00 (ex. VAT) 1 in stock

Raise 3D Pro 2 Plus 3D Printer

ITEM-54745

Raise 3D Pro 2 Plus 3D Printer

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

Please note: There is no filament spool included.

The previous owner states the units were operational, though some may require minor repairs, component replacements, and routine maintenance.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Walker All In One Fumigation Units Lab

ITEM-46390

Job Lot of 6 x Walker All In One Fumigation Units Lab

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included is the following:

6 x Walker All In One Fumigation Units

£ 500.00 (ex. VAT) 1 in stock

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

ITEM-47154

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 500.00 (ex. VAT) 1 in stock

Dedotec Dedocool COOL T3 Lighting System Lab

ITEM-40944

Dedotec Dedocool COOL T3 Lighting System

This was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order.

£ 500.00 (ex. VAT) 1 in stock

TEFCOLD Model CAF650 Commercial Gastronorm Upright Freezer

ITEM-50358

TEFCOLD CAF650 Freezer

This item was removed from a facility where it was surplus to requirements.

It is in poor cosmetic condition with several scrapes, tape marks, and dents (all pictured). The freezer is functional, however it is worth noting that after setting the temperature the compressor briefly cuts out for approximately 3–5 minutes before continuing—this is normal operational behaviour.

The internal light is working and the display is clear.

Includes 4 x shelves

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Z Corporation ZPrinter 450 3D Printer Lab

ITEM-37485

Z Corporation ZPrinter 450 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

In good cosmetic condition. The printer failed to power on and did not pass the PAT test.

Therefore, it is listed as Spares/Repair.

Specifications;

Build speed: between 2 to 4 layers per minute

Build volume:

X-axis: 8 inches (203 mm)
Y-axis: 10 inches (254 mm)
Z-axis: 8 inches (203 mm)
Build capacity: 640 cubic inches
Layer thickness:
Minimum: 0.0035 inches (0.089 mm)
Maximum: 0.004 inches (0.102 mm)
Color shell thickness: 0.025 inches
Resolution: 300 x 450 dpi
Materials:
Powder: zp130
Binder: zb59
Print heads:
HP11 (clear binder)
HP57 (single tricolor CMY)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

TurboChef NG0EW Sota High Speed Commercial Oven

ITEM-51087

TurboChef NG0EW Sota High Speed Oven

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cometic condition and powers on.

Please note; During testing, after approximately 5 minutes of being powered on, the oven cut out and tripped the electrical system. After being left for a few minutes and powered on again, it successfully completed both the warm-up (to 260 °C) and cool-down sequences.

Additionally, two of the legs are slightly bowed in (as shown in the photos), however they are still supporting the unit without issue.

Due to the issues stated above, this item is listed as Spares/Repair.

Current counters:

Cook time: 78 — 05:11:48
Cook counts: 68,035
Oven time: 15,610 — 7:03:25
Mag time: 16 — 09:21:08

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Stratasys Dimension Elite 3D Printer PN - 180-00105

ITEM-51388

Stratasys Dimension Elite 3D Printer – PN: 180-00105

This system was removed from a facility where it was declared surplus to requirements.

The unit is in reasonable cosmetic condition overall and powers on, however, the screen is clearly damaged and does not display correctly when the system attempts to start. The door also shows cosmetic wear, with peeling plastic and staining present across the unit.

Please note that the item repeatedly failed PAT testing due to insulation faults.

Due to these issues the system is being sold for spares or repair, and no further testing has been carried out at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Objet Eden 260V 3D Printer

ITEM-51597

Objet Eden 260V 3D Printer Spares/Repair

This system was removed from a facility where it was surplus to requirements.

The unit powers on.

The previous owner advised that the system has a software issue, which prevents full operation and flushing of materials. The unit has been used with photo-cure resin, and while it has been cleaned externally, complete internal decontamination was not possible due to the software limitation.

The material cartridges and waste containers have been removed, and connections have been blocked off. Surfaces have been thoroughly cleaned, so casual contact should not result in exposure to residual material.

Due to the software issue and partial decontamination, the system is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Z Corporation ZPrinter 450 3D Printer

ITEM-52621

Z Corporation ZPrinter 450 3D Printer

This item was removed from a facility where it was surplus to requirement.

The unit powers on and displays a black screen on the control display, we were unable to progress or operate the system any further.

Due to this fault, the unit could not be fully tested and is therefore being sold for spares or repair.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Lot of 19 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

ITEM-43125

Lot of 19 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

This lot of items was removed from a university where they were surplus to requirement.

Included are 19 Brand New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101.

1 of the boxes was opened to photograph the contents.

Vesa mounting interface 100 x 100mm and 70 x 70mm
Max load 1.1 Kg
Articulating arm with adjustable height, rotating, pan and tilt
Desk clamp mount and grommet mount.
Full instruction and assembly leaflet
Assembly Tools

£ 500.00 (ex. VAT) 1 in stock

Christie Mirage S+4K Commercial Projector

ITEM-36558

Christie Mirage S+4K Commercial Projector

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

The control buttons and remote control are fully functional and performing as intended.

£ 455.00 (ex. VAT) 1 in stock

MotionLink Model ServoStep Rackmount Motor Driver

ITEM-43090

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

MotionLink ServoStep Rackmount Motor Driver

ITEM-43085

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

ITEM-47155

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

G.F.E Bartlett F18G/611 Commercial Catering Gas Cooker

ITEM-51089

G.F.E. Bartlett F18G/611 Catering Gas Cooker

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however it could not be tested further at our facility.

The oven door opens and closes correctly, however, please note that part of the rubber door seal is not properly attached.

Included with the sale:

15 x trays (various sizes)
2 x shelving inserts

£ 450.00 (ex. VAT) 1 in stock

Job Lot of 5 x Triumph Small Drawer Cabinets

ITEM-36979

Job Lot of 5 x Triumph Small Drawer Cabinets

These items were removed from a facility where they were surplus to requirement.

They are in good used cosmetic condition with some signs of use.

3 x L58 W42 H60cm

Internal drawer - L48 W33 H8 (Bottom 48cm)

2 x L58 W30 H56cm

Internal drawer - L48 W21 D8cm (Bottom 24cm

£ 450.00 (ex. VAT) 1 in stock

Job Lot of 62 x Poly Edge B20 Telephone

ITEM-52750

Job Lot of 62 x Poly Edge B20 Telephone

This job lot of items comes from a facility where they were surplus to requirement.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included;

42 Complete Sets
20 Without Keypad Stands

£ 450.00 (ex. VAT) 1 in stock

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

ITEM-38018

DJI Ronin R-16 Camera Stabilisation Gimbal System Kit

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order, we are unable to test it fully at our facility.

This kit includes the following:

1 x main remote controller Model NDJ6 Serial No. MP1410CK003211

1 x thumb controller and guide booklet

1 x iPad mini 2 16GB model A1489 serial No. F9FQ4T3AFCM8 with charger and USB cable

1 x battery charger Model MDA10116803000

1 x camera base plate DJI R-001 for RED/ Canon/ Blackmagic/ Nikon

2 x batteries model No. 824380-3400mAh-14.8v

1 x USB cable

1 x power leads

1 x 3-axis small rig connector

2 x type A quick release mounts

1 x accessory kit - 3 x allen keys, 4 x screws, 1 x locking tool

1 x Ronin-M hard carry case

1 x user manual

1 x stand

£ 435.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55539

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 430.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55538

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 425.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55537

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 420.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55536

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 415.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55535

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 410.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55534

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 405.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55533

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

NEW ITEM

£ 400.00 (ex. VAT) 1 in stock

Lot of Koolance Radiators 10 x 2x120mm, 54mm Thick & 2 x 3x120mm

ITEM-48698

Lot of Koolance Radiators 10 x 2x120mm, 54mm Thick & 2 x 3x120mm

These items were removed from a facility where they were surplus to requirement.

All units are brand new in their original packaging.

Included are;

10 x 2x120mm, 54mm Thick 30-FPI Copper (HX-240XC)
2 x 3x120mm 30-FPI Copper (HX-CU1020V)

£ 400.00 (ex. VAT) 1 in stock

EG&G Princeton Applied Research Lock-In Amplifier Model 5101 Lab

ITEM-49018

EG&G Princeton Applied Research Lock-In Amplifier Model 5101 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 400.00 (ex. VAT) 1 in stock

Large Unbranded Commercial Blue Floor Safe Electronic Keypad 61x71x80 cm 620 kg

ITEM-50720

Large Unbranded Blue Floor Safe Electronic Keypad 61x71x80 cm 620 kg

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition.

External length (cm) 61
External width (cm) 71
External height (cm) 80

Internal length (cm) 50
Internal width (cm) 40
Internal height (cm) 58

£ 400.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine

ITEM-54343

Janome Memory Craft 350 Sewing/Embroidery Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 395.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55532

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 395.00 (ex. VAT) 1 in stock

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

ITEM-55540

Janome Memory Craft 350 Sewing/Embroidery Machine MC350E

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

£ 390.00 (ex. VAT) 1 in stock

Panasonic Type AW-HE50 CCTV Camera

ITEM-37268

Panasonic AW-HE50 CCTV Cameras

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The previous client has stated it was in full working order prior to removal.

This item was tested with an in-house power supply cable. (not included.)

NEW ITEM

£ 350.00 (ex. VAT) 1 in stock

Insta360 Farsight CINPITX/A Wireless Control System for Pro 2 Pro VR Lab

ITEM-51413

Insta360 Farsight CINPITX/A Wireless Control System for Pro 2 Pro VR Lab

This item was removed from a facility where it was surplus to requirement.

It is brand new in its original packaging

£ 350.00 (ex. VAT) 1 in stock

Advantech Industrial Computer IPC-610 Lab

ITEM-46429

Advantech Industrial Computer IPC-610 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Included is a key for the outer lock, which is fully functional

£ 350.00 (ex. VAT) 1 in stock

Foster Commercial Catering Refrigerator Model HR150

ITEM-50366

Foster Refrigerator Model HR150

This item was removed from a facility where it was surplus to requirement.

It is in poor cosmetic condition, with a dent on the door and mould present at the bottom of the cabinet.

It powers on and is in good working order.

Additional details:

Contains: 1 shelf
Internal volume: 149 L
Door seals: Good condition
Lockable: Yes (no keys provided)

Commercial, IT and Miscellaneous

Filters