Other Engineering
Items 1 to 19 of 19
£ 20,000.00 (ex. VAT) 1 in stock
Battenfeld Microsystem 50 Injection Moulding Machine
ITEM-38946
Battenfeld Microsystem 50 Injection Moulding Machine
This was removed from a university workshop where it was surplus to requirements.
The unit was not tested on our site, but the lab confirmed it was in working order prior to removal.
It is in good cosmetic condition with minor marks.
£ 4,000.00 (ex. VAT) 1 in stock
Andre Zailkin TM3 Capping Machine
ITEM-46910
Andre Zailkin TM3 Capping Machine
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers up, we are unable to test it further at our facility.
£ 3,000.00 (ex. VAT) 1 in stock
Job Lot Of Swagelok Pressure Gauges + Compression Fittings
ITEM-39227
Job Lot Of Swagelok Pressure Gauges + Compression Fittings
These were removed from a university lab where they were surplus to requirements.
The parts are as follows:
| PART NUMBER | DESCRIPTION | CONDITION | QUANTITY |
| PGI-50m-PG25-LASX-ABE | Pressure Gauge, Bottom entry, 0-25 Bar - Swagelok | BN | 18 |
| Valve | 1/4" Ball Valve - Boss/Waverley & Others | Used | 16 |
| 3/8" & 3/16" nuts, tees , fittings | Swagelok | Assorted | Assortment |
| ~60mm Panel mount, bottom entry gauge | BNIB | 5 | |
| PGU-50-PC200-L-4FSF | Gauge, bottom entry, UHPurity - Swagelok | BN | 6 |
| PGU-50-PC200-C-4FSF | Rear entry | BNB | 5 |
| Pressure gauge | Oil filled, rear entry, 0-11 Bar | New | 4 |
| Pressure gauge | Bottom entry, 0-11 Bar | New | 6 |
| Union elbow | 3/8" Elbows | 6 | |
| Union cross | 3/8" Crosses | 5 | |
| Straight union | 3/8" Union | 14 | |
| SS-4WVCR-6-400 | BNIB | 6 | |
| SS-4WVCR-CP | BNIB | 6 | |
| Union | 3/8" Elbow | Used | 5 |
| SS-810-1-8W | 1/2" tube x 1/2" male weld | BNIB | 2 |
| SS-600-7-6-BMP | 3/8" x 1/2"F | 2 | |
| SS-PB4-TA4 | Box of 10 quick connects | BNIB | 1 |
| SS-PB8-TA8 | Box of 10 quick connects | BNIB | 4 |
| SS-P | Box of 10 quick connects | BNIB | 7 |
| SS-QC4-S-400 | Box of 10 quick connects | BNIB | 3 |
| SS-QC4-B-4PM | Box of 10 quick connects | BNIB | 1 |
| Assorted quick connects | Assorted quick connects | BN | ~50 |
£ 2,470.00 (ex. VAT) 1 in stock
4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans
ITEM-37658
4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans
These were removed from a university lab where they were surplus to requirements.
All 4 Units power on and are powerful they are in Good Condition with Minimal Wear and just a few minor scratches here and there
Model - EWRG 210 LB/4
£ 2,000.00 (ex. VAT) 1 in stock
Betol 2520J Single-Screw Extruder
ITEM-45427
Betol 2520J Extruder
This item was removed from a university lab where they were surplus to requirements.
It is in good used cosmetic condition and powers on.
The previous client has stated it was last used around 6 years ago and reportedly worked fine at the time.
Please note: this item does not contain a Drill-Bit.
£ 900.00 (ex. VAT) 1 in stock
Loveshaw Little David LD19PT Box Case Taping Machine
ITEM-46231
Loveshaw Little David LD19PT Box Taping Machine
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to conduct further testing.
£ 850.00 (ex. VAT) 1 in stock
Wadkin Bursgreen 22/18 Hollow Chisel Morticer w/ 10 x Chisel Various Sizes
ITEM-47084
Wadkin Bursgreen 22/18 Hollow Chisel Morticer
This item was removed from a university where it was surplus to requirements.
It powers up and appears to operate as intended. The attached lamp is also functional.
The unit is currently mounted on a heavy-duty wheeled support frame, though it could be removed and floor-mounted if preferred. In good used cosmetic condition.
Includes:
- 9 x Mortice chisel bits (various sizes, including 1 fitted)
- 1 x Jacobs chuck with key
- 1 x Grease gun
- 1 x Collet
- 2 x Unknown collar parts
- 2 x Spanners
- 1 x Allen key
£ 800.00 (ex. VAT) 1 in stock
Slee London Model DS Vacuum Vice Precision Measuring Tool w/ DTI Gauge
ITEM-45321
Slee London Model D2 Vacuum Vice Precision Measuring Tool DTI
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good mechanical order, we are unable to test it fully at our facility.
It features an external vacuum connector valve and a DTI gauge.
£ 800.00 (ex. VAT) 1 in stock
Wild Heerbrugg Tachymat TC1000 Digital Theodolite Lab
ITEM-24218
Wild Heerbrugg Tachymat TC1000 Digital Theodolite
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and includes the original carry case shown in the image.
We are unable to test the item at our facility.
£ 650.00 (ex. VAT) 1 in stock
STS STE03-DRV03 Drum Lifting Trolley
ITEM-46221
STS STE03-DRV03 Drum Lifting Trolley
This item was removed from a facility where it was surplus to requirements.
It appears to be in good cosmetic condition. Unable to test as it requires pressurised air.
£ 650.00 (ex. VAT) 1 in stock
Record WPE 100 Electric Work Positioner
ITEM-46225
Record WPE 100 Electric Work Positioner
This item was removed from a university laboratory where it was surplus to requirements.
It is in reasonably good condition, powers on and is in working order.
£ 600.00 (ex. VAT) 1 in stock
STS Drum Lifting Trolley 60kg
ITEM-46226
STS Drum Lifting Trolley
This item was removed from a facility where it was surplus to requirements.
The STS Drum Lifting Trolley is in good cosmetic condition. It has not been powered on, as operation requires a compressor.
Therefore, it is untested.
£ 600.00 (ex. VAT) 1 in stock
LiftSafe 60KG Electric Work Positioner
ITEM-46223
LiftSafe 60KG Electric Work Positioner
This item was removed from a facility where it was surplus to requirements.
It is in fairly poor cosmetic condition but in good working order.
£ 500.00 (ex. VAT) 1 in stock
Job Lot of Various Sykes-Pickavant Bearing / Gear Pullers - Spares/Repair
ITEM-47407
Job Lot of Sykes-Pickavant Bearing/Gear Pullers
These items were removed from a university where they were surplus to requirement.
A large assortment of bearing and gear puller components, mostly—if not entirely—manufactured by Sykes-Pickavant in the UK. All parts appear to be in good used condition.
Please note:
- We cannot guarantee that all pullers are complete.
- Some extra bolts may be required to connect the legs to the pullers.
- All items are housed in a built tool chest for convenient storage and transport.
Therefore, this job lot of items are listed as Spares/Repair.
Study the photos carefully for full details on included parts and condition.
£ 400.00 (ex. VAT) 1 in stock
Nikon Ne10 Digital Theodelite Lab
ITEM-24217
Nikon Ne10 Digital Theodelite
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and includes the original carry case shown in the image.
We are unable to test the item at our facility.
£ 350.00 (ex. VAT) 1 in stock
Kito SF-480 Electric Chain Hoist 500kg
ITEM-47278
Kito SF-480 Electric Chain Hoist 500kg
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition with typical signs of use, and is in good working order.
It will require an inspection for safety before use.
£ 250.00 (ex. VAT) 1 in stock
Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab
ITEM-38507
Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it at our facility.
This item does not include a power supply.
£ 240.00 (ex. VAT) 1 in stock
Vintage Tapping Machine Model S
ITEM-47284
Vintage Tapping Machine Model S
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition and in working order.
£ 180.00 (ex. VAT) 1 in stock
Clarke Strong-Arm Model HDC100 Engine Hoist 1000Kg Capacity
ITEM-42849
Clarke Strong-Arm Model HDC100 Engine Hoist – 1000Kg Capacity
This item was removed from a university where it was surplus to requirements.
This heavy-duty mobile engine hoist with four lockable boom positions, offering lift capacities from 300Kg to 1000Kg.
Supports a maximum 1000Kg load when the boom is locked at 120cm from the central column, and 300Kg at full extension (150cm).
Maximum lifting hook height: 272cm.
Features stabiliser legs (90cm at widest, 67cm at column), front fixed 150mm wheels, and rear 150mm swivel castors for mobility.
In good cosmetic condition, with smooth lift operation and no leaks detected.
Model: HDC100
Items 1 to 19 of 19