Engineering

£ 600.00 (ex. VAT) 1 in stock

Morso DK 8900 Randers Manual Guillotine

ITEM-41148

Morso DK 8900 Randers Manual Guillotine

Model: DK 8900

This was removed from a university lab where it was surplus to requirements. It is mechanically sound.

It is in reasonably good cosmetic condition.

£ 600.00 (ex. VAT) 1 in stock

STS Drum Lifting Trolley 60kg

ITEM-46226

STS Drum Lifting Trolley

This item was removed from a facility where it was surplus to requirements.

The STS Drum Lifting Trolley is in good cosmetic condition. It has not been powered on, as operation requires a compressor.

Therefore, it is untested.

£ 600.00 (ex. VAT) 1 in stock

Leybold Heating Power Supply HU1 Lab

ITEM-36861

Leybold Heating Power Supply HU1

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

LiftSafe 60KG Electric Work Positioner

ITEM-46223

LiftSafe 60KG Electric Work Positioner

This item was removed from a facility where it was surplus to requirements.

It is in fairly poor cosmetic condition but in good working order.

£ 600.00 (ex. VAT) 1 in stock

Bambi PT24 Oil Free Compressor

ITEM-47398

Bambi PT24 Oil Free Compressor

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

NEW ITEM

£ 595.00 (ex. VAT) 1 in stock

Job Lot of 38 Boxes of WintWire Welding Wire Size - 2.50 x 3.50 FRE

ITEM-38990

Job Lot of WintWire Welding Wire

38 x Boxes

Box info:-

Order no. HPWAAM - S3

Cast no. 017011

Weight - 8.4kg

Tensile - 945 N/mm2

Size - 2.50 x 3.50 FRE

Quality - 1.4034

All looks new and unused though a box has been opened for photos.

£ 500.00 (ex. VAT) 1 in stock

AT Delta-T Logger System with Software & Accessories Lab

ITEM-25021

This was removed from a university lab where it was surplus to requirements.

The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.

The item is untested as it wasn't supplied with a PSU.

Also included are the following:

1x Delta-T Devices atmospheric temperature & humidity probe

S/N: RHAI-077

1x Delta-T PC software type LS2

Version 1.04

1x Desiccant Pack

1x DE-9 cable

1x Tutorial Kit

1x Spares & Accessory Pack

3x Component part (EMC directive) 5m

5x Temperature Probes User Manual

1x Quantum Sensor User Manual

1x Delta-T Devices Data Loggers, Sensors & Systems

1x Delta-T Devices Plant Science & Solar Radiation Studies

1x Delta-T Devices Image Analysis Systems

1x Delta-T Logger User Manual Version 2.01

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs

ITEM-41471

Integrated BMS Jet Nozzle Test Facility -CP3 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.

Therefore, it is listed as Spares/Repair.

Includes operation keys.

Door key not included but can be opened with a standard control cabinet key.

£ 500.00 (ex. VAT) 1 in stock

Paar DMA 35 Density Meter Kit Lab

ITEM-41972

Paar DMA 35 Density Meter Kit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

It was tested with a 9-volt 6LR61 test battery, this is not included in the sale.

The kit consists of:

1 x Density meter

1 x Sanitex Eternal-Matic 2ml filling syringe

1 x Calibration screwdriver

1 x Wrist strap

1 x Original Hard plastic carry case

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

ITEM-42462

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

This job lot of items comes from a university laboratory. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs, as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Included in the lot:

6 x Lafert Type: ST63C4 Motors with Air Blowing Impellers
Further Information from Data Plate:
IEC60038 3~Mot.
Th.Cl.F IP55.
50Hz: 230/400V 0.13kW 0.87/0.50A.
60Hz: 254/440V 0.15kW 0.87/0.50A.
1360/1630min-1 cos 0.64/0.64.
Protector Type PT0 150°C.
Individual Dimensions: L 53cm x W 25cm x H 25cm, 4.6Kg each.
Shaft Length: 30cm.
Fan Dimensions: 25cm x 25cm.

£ 500.00 (ex. VAT) 1 in stock

Spellman Power Supply RSBX30X3077 Lab

ITEM-34855

Spellman Power Supply RSBX30X3077

Model: RSBX30X3077

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we are unable to test it at our facility.

Includes 9-pin FEMALE DIN Cable.

£ 500.00 (ex. VAT) 1 in stock

Wykeham Farrance Oedometer CBR Testing Lab

ITEM-34568

This Wykeham Farrance Oedometer CBR Testing was removed from a university lab where it was surplus to requirements.

The unit powers up the hand control unit works correctly, and the hydraulic ram goes up and down freely.

It is in reasonable cosmetic condition with marks from use.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

WEG CFW -11 Venture Inverter Control Box Lab Spares/Repairs

ITEM-41470

WEG CFW -11 Venture Inverter Control Box Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on or test it further at our facility.

The key is not included but can be opened with a standard control cabinet key.

Includes manual.

The unit has no cable so is sold for spares/repairs

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 450.00 (ex. VAT) 1 in stock

Olympus 165MIG Mig Welder Welding Machine

ITEM-47275

Olympus 165MIG Mig Welder Welding Machine

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test them further at our facility.

The previous owner stated it was working prior to removal.

£ 450.00 (ex. VAT) 1 in stock

Job lot of Flight Cases (Qty. 5) Airbus, LHT-HAM.

ITEM-37111

Job lot of Flight Cases (Qty. 5)

These items were removed from a University as they were surplus to requirements.

All flight cases are in reasonably good cosmetic condition, with some scuffs and scratches from general use.

All handles and clasps on the flight cases are in good working condition.

Included are the following:

Airbus Large White flight case

External Dims:

L76cm W133cm H41cm

Interior Dims

L70cm x W132cm x H36cm

LHT-HAM Long Black flight case

External Dims:

L44cm x W140cm x H39cm

Interior Dims:

L38cm x W133cm x H34cm

LHT-HAM Cubic Flight Case:

External Dims:

L71cm x W79cm x H59cm

Interior Dims:

L66cm x W75cm x H53cm

LHT-HAM Small Square flight case:

External Dims:

L37cm x W39cm x H26cm

Interior Dims:

L33cm x W37cm x H23cm

Airbus Small white flight case:

External Dims:

L25cm x W48cm x H25cm

Interior Dims:

L21cm x W45cm x H22cm

£ 400.00 (ex. VAT) 1 in stock

ADInstruments PowerLab/8S and Two Quad Bridge ML118, Probes and Software

ITEM-37466

ADInstruments PowerLab/8S with Quad Bridge Amplifiers, Probes, and Software

This system was removed from a university laboratory where it was surplus to requirements.

The PowerLab/8S powers on and is in good cosmetic condition with some paint scrapes on the top surface. The Quad Bridge units and probes are visually in good condition. No further testing has been conducted on the software or functionality of the data acquisition process.

In good cosmetic condition, with some paint scrapes on the top of the PowerLab/8S; no further functionality testing performed.

The system comprises the following:

ADInstruments PowerLab/8S 8-channel unit
Serial No.: PL8056
2 x Quad Bridge Amplifiers
Model: ML118
Serial Nos.: 1088, 1606
6 x Letica TRI 201 Probes
Serial Nos.: 4991, 4992, 4993, 4994, 6212/02, 6211/02
ADInstruments Chart & Scope Software
Cairn Acquisition Engine v1.1.7
ADInstruments PowerLab Software Installer
1 x Data cable

£ 400.00 (ex. VAT) 1 in stock

Nikon Ne10 Digital Theodelite Lab

ITEM-24217

Nikon Ne10 Digital Theodelite

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and includes the original carry case shown in the image.

We are unable to test the item at our facility.

£ 400.00 (ex. VAT) 1 in stock

Gast Air Compressor BS5169 III E

ITEM-20164

Gast Oil-Less Air Compressor

This item was removed from a university laboratory where it was surplus to requirements.

This unit has been professionally serviced, the engineer report is available on request.

It is in good condition and features a reset button.

Specifications:

Code: BS5169 III E
Capacity: Approx. 25 litres
Serial No.: 0434
Test Pressure: 15 Bar
Design Pressure: 10 Bar
Temperature Range: -10°C to +100°C
Part No.: TUMD105/1

£ 400.00 (ex. VAT) 1 in stock

Antique Corona 9FX Watchmakers Benchtop Drill (1957)

ITEM-47406

Corona 9FX Watchmakers Benchtop Drill

This item was removed from a universitys where it was surplus to requirements.

The unit powers on and is operational. The spindle runs smoothly, and the lamp is functional. The fitted drive belt appears to be the original and would likely benefit from replacement due to age. Cosmetically in good condition for its age (68 years old), with expected signs of historical use.

Includes:

No. 0 Jacobs chuck (0–5/32” capacity)
Chuck key

Work bed dimensions: 18cm x 18cm

Model: 9FX

£ 400.00 (ex. VAT) 1 in stock

Lowara ITT Industries CEA 120/5-V Centrifugal Pump

ITEM-46783

Lowara ITT Industries CEA 120/5-V Centrifugal Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

Includes;

Power controller - MEM Model 331VSEL

£ 400.00 (ex. VAT) 1 in stock

3 x Spellman X3000 Power Supplies Lab

ITEM-34854

3 x Spellman X3000 Power Supplies

Model: X3000

These Spellman X3000 Power Supplies were removed from a university, where they were surplus to requirement.

The units are untested.

Individual Dimensions:

L34cm x W13cm x H8cm

NEW ITEM

£ 395.00 (ex. VAT) 1 in stock

Job Lot of 21 Boxes of WintWire Welding Wire Size - 3.40 x 1.20 Mild Steel

ITEM-38991

Job Lot of 21 Boxes of WintWire Welding Wire Size - 3.40 x 1.20 Mild Steel

Job Lot of WintWire Welding Wire

21 x Boxes

Box info:-

CUST No. HPWAAM

Cast no. 89699

Weight - 11.9kg

S.O. - 16898/6

Size - 1.204 x 3.411 FRE

Quality - Profile Mild Steel

All looks new and unused though a box has been opened for photos.

£ 375.00 (ex. VAT) 1 in stock

Durr Technik 90L Oil Free Air Compressor

ITEM-35301

Durr Technik 90L Oil Free Air Compressor

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order.

It is in good cosmetic condition but the glass is missing from the gauge.

£ 350.00 (ex. VAT) 1 in stock

Eurotherm Drives 620 Series Vector Link Model - 620STD

ITEM-27556

Eurotherm Drives 620 Series Vector

Model - 620STD/0007/400/0010/UK/ENW/0000/000/B1/000/000

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in reasonable cosmetic condition but has marks from use.

£ 350.00 (ex. VAT) 1 in stock

Schneider Silent Master 50-8-9 w/ Piston Compressor

ITEM-46244

Schneider Silent Master 50-8-9 w/ Piston Compressor

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and draws air, we are unable to test it further at our facility

£ 350.00 (ex. VAT) 1 in stock

Sherwood M851 Air Compressor Lab

ITEM-44990

Sherwood M851 Air Compressor

This item was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition, powers on, and is fully functional.

£ 350.00 (ex. VAT) 1 in stock

Kito SF-480 Electric Chain Hoist 500kg

ITEM-47278

Kito SF-480 Electric Chain Hoist 500kg

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition with typical signs of use, and is in good working order.

It will require an inspection for safety before use.

NEW ITEM

£ 300.00 (ex. VAT) 1 in stock

Miltenyi Biotec MACSmix Tube Rotator Lab

ITEM-46160

Miltenyi Biotec MACSmix Tube Rotator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in excellent cosmetic condition, potentially new or barely used.

The item is still in its original packaging.

Includes:

12V Power supply

£ 300.00 (ex. VAT) 1 in stock

Isel UFM 500 230v Milling Motor Unimatic CNC

ITEM-47415

Isel UFM 500 230v Milling Motor (Unimatic)

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order. Fitted with a Euro 2-pin plug. This motor is commonly used in Unimatic eduCAM CNC routers.

Includes:

Manual/fitting instructions
Chuck tools
Router attachment

Model: UFM 500

Voltage: 230V

£ 300.00 (ex. VAT) 1 in stock

12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab

ITEM-37186

12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab

These items were removed from a university where they were surplus to requirement.

All items are in very good cosmetic condition and untested.

This listing comprises:

6 x Schmersal RST 36-1

Part#: 101213820

1 x Schmersal RSR 36-D-R-ST

Part#: 101213956

5 x Schmersal RSR 36-D-S7

Part#: 101213954

14 x SD-Y-ADAPTER

9152/2781406

2 x Small Cable AL-WAK8-2, 5-AL-WAS8/S370/S4000

8057201 9242/2797213

9 x Medium Cable AL-WAK8-1,5-AL-WAS8/S370/S4000

8057200 0225/3159235

16 x Large Cable AL-WAKA-0,5-AL-WAS8/S370/S4000

8057197 8311/2457690

£ 280.00 (ex. VAT) 1 in stock

Isel UFM 500 230v Milling CNC Motor Unimatic (No plug)

ITEM-47416

Isel UFM 500 230V Milling Motor (Unimatic)

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and in good working order. The motor was previously hardwired to a router, so a plug was temporarily fitted to test functionality. It powered up as expected and has since had the plug removed following PAT testing. This motor is commonly used in Unimatic eduCAM CNC routers.

Includes:

Manual/fitting instructions
Router attachment (type unspecified)

Model: UFM 500

Voltage: 230V

£ 250.00 (ex. VAT) 1 in stock

PBF PRA100M3 Power Supply

ITEM-34639

This PBF PRA100M3 Power Supply was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use but has not been tested.

£ 250.00 (ex. VAT) 1 in stock

Powertecnique Uninterruptable Three-Phase Power Supply & Battery Box Lab

ITEM-20369

This Powertecnique Uninterruptable Three-Phase Power Supply & Battery Box was removed from a university lab where it was surplus to requirements.

This was last serviced december 2019. We understand they were in use until at least 2021, but may have been offline for some time so it is possible the batteries perform poorly.

The UPS powers up but has not been tested further. We were unable to test the battery box.

They are in reasonably good cosmetic condition but have some marks from use.

£ 250.00 (ex. VAT) 1 in stock

Axon Instruments CyberAmp 380 Programmable Signal Conditioner Amplifier Lab

ITEM-31835

Axon Instruments CyberAmp 380 Programmable Signal Conditioner Amplifier

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in good cosmetic condition with minor marks from use.

£ 250.00 (ex. VAT) 1 in stock

Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab

ITEM-38507

Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

This item does not include a power supply.

£ 250.00 (ex. VAT) 1 in stock

Gabro 4M2 Manual Guillotine and Notcher Engineering

ITEM-44951

Gabro Manual Guillotine and Notcher

This item was removed from a university where it was surplus to requirements.

The unit is in reasonably good cosmetic condition, showing various signs of wear and use. It is missing some bolts.

Specifications:

Dimensions: L136 x W130 x H222 cm

£ 250.00 (ex. VAT) 1 in stock

Axon Industries MultiClamp 700A Computer Controlled Current and Voltage Clamp

ITEM-42787

Axon Industries MultiClamp 700A Computer Controlled Current and Voltage Clamp

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ POA 1 in stock

Air Control Industries Centrifugal Fan 2MS11-34263-3254A-FD

ITEM-46782

This item is new in stock. Please enquire for further details.

£ 180.00 (ex. VAT) 1 in stock

Clarke Strong-Arm Model HDC100 Engine Hoist 1000Kg Capacity

ITEM-42849

Clarke Strong-Arm Model HDC100 Engine Hoist – 1000Kg Capacity

This item was removed from a university where it was surplus to requirements.

This heavy-duty mobile engine hoist with four lockable boom positions, offering lift capacities from 300Kg to 1000Kg.

Supports a maximum 1000Kg load when the boom is locked at 120cm from the central column, and 300Kg at full extension (150cm).

Maximum lifting hook height: 272cm.

Features stabiliser legs (90cm at widest, 67cm at column), front fixed 150mm wheels, and rear 150mm swivel castors for mobility.

In good cosmetic condition, with smooth lift operation and no leaks detected.

Model: HDC100

£ 150.00 (ex. VAT) 1 in stock

BOC LD180 a.c. Welding Set

ITEM-41145

BOC LD180 a.c. Welding Set

Model: LD180

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition, but we are unable to test it at our facility.

The lab believed it was in working order prior to removal.

£ POA 1 in stock

Datron CAT3D-M9 CNC Milling Machine with Accessories

ITEM-43010

This item is new in stock. Please enquire for further details.

£ POA 1 in stock

High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024

ITEM-49526

High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024

This system is sold on behalf of a Client. It is surplus to requirement.

The facility was commissioned in 1999 by Lola Cars to deliver advanced aerodynamic testing for race and road cars. It has an extensive history of use by leading motorsport and automotive brands including Mazda, Toyota F1, Aston Martin, Bentley, MG (Le Mans Car) and Scania Trucks. Typical rental rates for external users have been around £7,000 per day.

A major upgrade project was completed between late 2023 and mid-2024, bringing the wind tunnel to the very latest standards of aerodynamic testing. The upgrade preserved the tunnel’s proven aerodynamic performance while introducing the latest control systems, data handling capabilities, and automation features.

Key upgrade highlights include:

New EtherCat-enabled control architecture for all major systems
Cosworth Diablo control software providing automated sequencing, Constant Motion Testing, advanced data acquisition, and integration with MATLAB and Pi Toolbox
Rolling Road and Boundary Layer Suction System fully upgraded for precision airflow control
Enhanced Model Motion System (MMS) with improved speed, power, and positional accuracy for realistic simulation of track and road conditions
Turntable synchronisation with MMS for accurate cornering simulations
Upgraded pressure scanning system with 384 high-speed, high-resolution channels
Aerotech overhead balance integrated with EtherCat for improved force measurement precision
Split high-speed network infrastructure for secure facility control and data handling

The wind tunnel is available for purchase with or without its 1,200 m² purpose-built building:

£2.153 million – wind tunnel only
£2.563M million – wind tunnel with building

It has been used very lightly over the past three years and is ready for continued use in motorsport, automotive R&D, and advanced aerodynamic applications.

This item is located in Huntingdon, UK.

Assistance with logistics may be available for an additional fee.

Further information, including detailed technical specifications, upgrade documentation, and photographs, is available on request.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.