Engineering
Items 151 to 198 of 198
£ 350.00 (ex. VAT) 1 in stock
Air Control Industries Centrifugal Fan 2MS11-34263-3254A-FD
ITEM-46782
Air Control Industries Centrifugal Fan 2MS11-34263-3254A-FD
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, but we are unable to test it further at our facility.
Fitted with a 3 phase 5-pin 16A plug and cable.
£ 350.00 (ex. VAT) 1 in stock
Prodrive Technologies Cooling Temperature Controller for TFS TEMs Lab
ITEM-48651
Prodrive Technologies Cooling Temperature Controller for TFS TEMs Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and remains untested.
Part#: 6538-1402-2900
£ 350.00 (ex. VAT) 1 in stock
Mitutoyo 543-552A - Dial Indicator 543 Digimatic 1 In/25.4mm w/ 215-407 Stand
ITEM-46592
Mitutoyo 543-552A - Dial Indicator 543 Digimatic 1 In/25.4mm w/ 215-407 Stand
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
Please note; The power supply is not included.
£ 350.00 (ex. VAT) 1 in stock
Mitutoyo 543-552A Dial Indicator 543 Digimatic 1 In/25.4mm w/ 215-407 Stand
ITEM-46593
Mitutoyo 543-552A Dial Indicator 543 Digimatic 1 In/25.4mm w/ 215-407 Stand
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The power supply is included.
£ 305.00 (ex. VAT) 1 in stock
Brook Hansen Motor with Gearbox Type - 100
ITEM-27558
This Brook Hansen Motor with Gearbox Type - 100 was removed from a university lab where it was surplus to requirements.
The item is in a reasonable, used cosmetic condition but has not been tested. It requires a 3-phase plug to be fitted.
There is no on/off switch so we decided it wasn't safe to power up.
£ 300.00 (ex. VAT) 1 in stock
Startrite Drilling Machine Pillar Drill 57x34x78 HxWxL cm
ITEM-48757
Startrite Drilling Machine Pillar Drill
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition and in good working order.
It will require a replacement belt, as the existing one is very perished.
Please note: No emergency stop is fitted due to the age of the equipment.
Technical information;
- 3 Phase 32amp.
- Work table size: 8-1/2" x 8-3/4".
£ 300.00 (ex. VAT) 1 in stock
MS Quiet Box II Noise Reduction System Size - Large
ITEM-47815
MS Quiet Box II Noise Reduction System Size - Large
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. Further testing has not been carried out at our facility.
Includes:
- 12V I.T.E PSU
- 12 Hand screws
Model: Quiet Box II
Serial No.: MSQ-G-01-03T-0464
- Internal Size: 64 x 50 x 64 cm
- External Size (assembled): 73 x 58 x 65 cm
£ 300.00 (ex. VAT) 1 in stock
12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab
ITEM-37186
12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab
These items were removed from a university where they were surplus to requirement.
All items are in very good cosmetic condition and untested.
This listing comprises:
6 x Schmersal RST 36-1
Part#: 101213820
1 x Schmersal RSR 36-D-R-ST
Part#: 101213956
5 x Schmersal RSR 36-D-S7
Part#: 101213954
14 x SD-Y-ADAPTER
9152/2781406
2 x Small Cable AL-WAK8-2, 5-AL-WAS8/S370/S4000
8057201 9242/2797213
9 x Medium Cable AL-WAK8-1,5-AL-WAS8/S370/S4000
8057200 0225/3159235
16 x Large Cable AL-WAKA-0,5-AL-WAS8/S370/S4000
8057197 8311/2457690
£ 290.00 (ex. VAT) 1 in stock
MS Model Quiet Box II Noise Reduction System Size - Large
ITEM-47816
MS Quiet Box II Noise Reduction System Size - Large
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. Further testing has not been carried out at our facility.
Includes:
- 12V I.T.E PSU
- 12 Hand screws
Model: Quiet Box II
Serial No.: MSQ-G-01-03T-0464
- Internal Size: 64 x 50 x 64 cm
- External Size (assembled): 73 x 58 x 65 cm
£ 280.00 (ex. VAT) 1 in stock
Isel UFM 500 230v Milling CNC Motor Unimatic (No plug)
ITEM-47416
Isel UFM 500 230V Milling Motor (Unimatic)
This item was removed from a university where it was surplus to requirements.
It is in good cosmetic condition and in good working order. The motor was previously hardwired to a router, so a plug was temporarily fitted to test functionality. It powered up as expected and has since had the plug removed following PAT testing. This motor is commonly used in Unimatic eduCAM CNC routers.
Includes:
- Manual/fitting instructions
- Router attachment (type unspecified)
Model: UFM 500
Voltage: 230V
£ 280.00 (ex. VAT) 1 in stock
MS Type Quiet Box II Noise Reduction System Size - Large
ITEM-47817
MS Quiet Box II Noise Reduction System Size - Large
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. Further testing has not been carried out at our facility.
Includes:
- 12V I.T.E PSU
- 12 Hand screws
Model: Quiet Box II
Serial No.: MSQ-G-01-03T-0464
- Internal Size: 64 x 50 x 64 cm
- External Size (assembled): 73 x 58 x 65 cm
£ 255.00 (ex. VAT) 1 in stock
MS Model Quiet Box II Noise Reduction System Size - Medium
ITEM-47820
MS Quiet Box II Noise Reduction System Small
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. Further testing has not been carried out at our facility.
Please note: There is no power supply included.
Includes:
- 8 Hand screws
Model: Quiet Box II
Serial No.: MSQ-G-00-02T-0448
- Internal Size - 73 x 34 x 60
- External Size once assembled - 82 x 42 x 61
£ 250.00 (ex. VAT) 1 in stock
Bambi BB8-240 Silent Air Compressor Lab
ITEM-49597
Bambi BB8-240 Silent Air Compressor
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and appears to be in good working order.
£ 250.00 (ex. VAT) 1 in stock
Grimston Electriska EC48AH Pillar Drill 84x46x175 cm LxWxH
ITEM-48759
Grimston Electriska EC48AH Pillar Drill
This item was removed from a facility where it was surplus to requirements.
The unit is in average used cosmetic condition, with various marks and signs of wear from general workshop use.
The drill powers up as expected, and the chuck spins when the power button is pressed. It may benefit from a general service due to age and use, but no faults beyond cosmetic wear have been identified during basic testing.
No chuck key is included with the unit.
Dimensions
- External length (cm) 84
- External width (cm) 46
- External height (cm) 175
Work Table Dimensions
- 46 cm (W) x 45.5 cm (L)
£ 250.00 (ex. VAT) 1 in stock
MS Quiet Box II Noise Reduction System Medium
ITEM-47819
MS Quiet Box II Noise Reduction System Small
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. Further testing has not been carried out at our facility.
Please note: There is no power supply included.
Includes:
- 8 Hand screws
Model: Quiet Box II
Serial No.: MSQ-F-01-02T-0370
- Internal Size - 73 x 34 x 60
- External Size once assembled - 82 x 42 x 61
£ 250.00 (ex. VAT) 1 in stock
Two-Piece Heavy Duty Metal Bar Stock Rack
ITEM-47797
Two-Piece Heavy Duty Metal Bar Stock Rack
This item was removed from a university laboratory where it was surplus to requirements.
The unit is in good overall condition with minimal wear, showing only some chipped paint in places.
It includes the metal frame only, with no racking components included.
£ 250.00 (ex. VAT) 1 in stock
Gabro 4M2 Manual Guillotine and Notcher Engineering
ITEM-44951
Gabro Manual Guillotine and Notcher
This item was removed from a university where it was surplus to requirements.
The unit is in reasonably good cosmetic condition, showing various signs of wear and use. It is missing some bolts.
Specifications:
- Dimensions: L136 x W130 x H222 cm
£ 250.00 (ex. VAT) 1 in stock
Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab
ITEM-38507
Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it at our facility.
This item does not include a power supply.
£ 250.00 (ex. VAT) 1 in stock
Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 & Welded Air Receiver
ITEM-19840
This Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 was removed from a university lab where it was surplus to requirements.
The unit powers up and builds pressure but has not been tested further. It works well.
It is in good cosmetic condition with minor marks.
£ 250.00 (ex. VAT) 1 in stock
AT Delta-T Logger System with Software & Accessories Lab
ITEM-25021
This was removed from a university lab where it was surplus to requirements.
The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.
The item is untested as it wasn't supplied with a PSU.
Also included are the following:
1x Delta-T Devices atmospheric temperature & humidity probe
S/N: RHAI-077
1x Delta-T PC software type LS2
Version 1.04
1x Desiccant Pack
1x DE-9 cable
1x Tutorial Kit
1x Spares & Accessory Pack
3x Component part (EMC directive) 5m
5x Temperature Probes User Manual
1x Quantum Sensor User Manual
1x Delta-T Devices Data Loggers, Sensors & Systems
1x Delta-T Devices Plant Science & Solar Radiation Studies
1x Delta-T Devices Image Analysis Systems
1x Delta-T Logger User Manual Version 2.01
£ 250.00 (ex. VAT) 1 in stock
Axon Industries MultiClamp 700A Computer Controlled Current and Voltage Clamp
ITEM-42787
Axon Industries MultiClamp 700A Computer Controlled Current and Voltage Clamp
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 250.00 (ex. VAT) 1 in stock
Electron Gun Power Supply - Ph 04 2005 Lab
ITEM-49314
Electron Gun Power Supply - Ph 04 2005 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 200.00 (ex. VAT) 1 in stock
MS Quiet Box II Noise Reduction System Small
ITEM-47818
MS Quiet Box II Noise Reduction System Small
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition. Further testing has not been carried out at our facility.
Please note: There is no power supply included.
Includes:
- 8 Hand screws
Model: Quiet Box II
Serial No.: MSQ-F-01-07T-0376
- Internal Size - 41 x 26 x 45
- External Size once assembled - 50 x 34 x 46
£ 200.00 (ex. VAT) 1 in stock
APC SMX2200HV UPS Tower - Spares/Repair
ITEM-47343
APC SMX2200HV UPS Tower - Spares/Repair
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however the display shows - Load: 0% Batt: 0%.
Therefore, it requires a battery replacement, and is listed as Spares/Repair.
£ 150.00 (ex. VAT) 1 in stock
BOC LD180 a.c. Welding Set
ITEM-41145
BOC LD180 a.c. Welding Set
Model: LD180
This was removed from a university lab where it was surplus to requirements.
It is in reasonably good cosmetic condition, but we are unable to test it at our facility.
The lab believed it was in working order prior to removal.
£ 60.00 (ex. VAT) 1 in stock
Topcon Surveying Reflector Prism with Carry Case & Surveyors Tripod
ITEM-25040
This Topcon Surveying Reflector Prism with Carry Case & Surveyors Tripod was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition but there are scratches and glue residue on the tripod. The tripod's lid is cracked and broken. The bag has scuff marks and has been written on with a marker.
It was not tested further but the tripod seems to be in good working order.
£ POA 1 in stock
Centauro Minimax S 600P Band Saw 3-Phase
ITEM-50532
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Sedgwick Tesh 3 Head Tennoner 3-Phase 32A
ITEM-50531
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
RMD M100-CE Rotary Tube Bender with Full Set of Pipe & Tube Formers
ITEM-50529
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Wadkin Bursgreen BGY 3 Disc & Belt Sander
ITEM-50528
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Baileigh Industrial R-M10 Manual Roll Bender w/ 3 x Additional Rollers
ITEM-50527
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Multico M3 Chisel Morticer w/ 13 x Drill Bits 32Amp
ITEM-50530
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
John Wilkinson Viceroy Sharpedge 16 Spares/Repair Lab
ITEM-50526
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Sedgwick MB 560 PM SM Planer Thicknesser
ITEM-50525
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024
ITEM-49526
High-Performance Automotive Lola Wind Tunnel w/ 1,200m² Facility Upgraded 2024
This system is sold on behalf of a Client. It is surplus to requirement.
The facility was commissioned in 1999 by Lola Cars to deliver advanced aerodynamic testing for race and road cars. It has an extensive history of use by leading motorsport and automotive brands including Mazda, Toyota F1, Aston Martin, Bentley, MG (Le Mans Car) and Scania Trucks. Typical rental rates for external users have been around £7,000 per day.
A major upgrade project was completed between late 2023 and mid-2024, bringing the wind tunnel to the very latest standards of aerodynamic testing. The upgrade preserved the tunnel’s proven aerodynamic performance while introducing the latest control systems, data handling capabilities, and automation features.
Key upgrade highlights include:
- New EtherCat-enabled control architecture for all major systems
- Cosworth Diablo control software providing automated sequencing, Constant Motion Testing, advanced data acquisition, and integration with MATLAB and Pi Toolbox
- Rolling Road and Boundary Layer Suction System fully upgraded for precision airflow control
- Enhanced Model Motion System (MMS) with improved speed, power, and positional accuracy for realistic simulation of track and road conditions
- Turntable synchronisation with MMS for accurate cornering simulations
- Upgraded pressure scanning system with 384 high-speed, high-resolution channels
- Aerotech overhead balance integrated with EtherCat for improved force measurement precision
- Split high-speed network infrastructure for secure facility control and data handling
The wind tunnel is available for purchase with or without its 1,200 m² purpose-built building:
- £2.153 million – wind tunnel only
- £2.563M million – wind tunnel with building
It has been used very lightly over the past three years and is ready for continued use in motorsport, automotive R&D, and advanced aerodynamic applications.
This item is located in Huntingdon, UK.
Further information, including detailed technical specifications, upgrade documentation, and photographs, is available on request.
The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.
£ POA 1 in stock
Echtop 1.123TECAB35-IE2 Centrifugal Fan
ITEM-49806
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Avestin French Press with Bambi 35/20 Air Compressor Lab
ITEM-47831
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Wooden Workshop Bench Lx183 Wx91 Hx76 cm
ITEM-49573
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Riello UPS Multi Sentry MST 100
ITEM-50512
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
HP Agilent Keysight 5334B Universal Frequency Counter Lab
ITEM-31682
This HP Agilent Keysight 5334B Universal Frequency Counter is being sold on behalf of a client. It is surplus to requirements.
It is in working order and in good cosmetic condition with minor marks from use.
The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.
£ POA 1 in stock
WAB Turbula Heavy-Duty Shaker-Mixer Model T10B Lab
ITEM-50091
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
WAB Turbula T2C Heavy-Duty Shaker-Mixer - Spares/Repairs
ITEM-50212
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Bambi VTS250D Oil-Free Air Compressor
ITEM-50514
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Jun-Air Model 3 Air Compressor Spares/Repair
ITEM-50039
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
ECOCHEMIE Metrohm Autolab Potentiostat/Galvanostat - PGSTAT30
ITEM-50219
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
RBD Instruments Model 20-042 X-Ray Power Supply
ITEM-50249
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Jun-Air Model 3 Air Compressor Spares/Repair
ITEM-50199
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Jun-Air Model 3 Air Compressor
ITEM-50200
This item is new in stock. Please enquire for further details.
Items 151 to 198 of 198