Engineering

£ 550.00 (ex. VAT) 1 in stock

PBF PRA100M3 Power Supply

ITEM-34639

This PBF PRA100M3 Power Supply was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use but has not been tested.

£ 500.00 (ex. VAT) 1 in stock

Paar DMA 35 Density Meter Kit Lab

ITEM-41972

Paar DMA 35 Density Meter Kit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

It was tested with a 9-volt 6LR61 test battery, this is not included in the sale.

The kit consists of:

1 x Density meter

1 x Sanitex Eternal-Matic 2ml filling syringe

1 x Calibration screwdriver

1 x Wrist strap

1 x Original Hard plastic carry case

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

B.O.B Stevenson Type 355 BI/J Centrifugal Fume Extraction Fan

ITEM-41463

B.O.B Stevenson Type 355 BI/J Centrifugal Fume Extraction Fan

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

The unit has no cabling and is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Pair of Horizon Collators MC-8 MC-8a and MC-8m Spares/Repairs

ITEM-41141

Pair of Horizon Collators MC-8 MC-8a and MC-8m

These were removed from a university lab where they were surplus to requirements.

Bot units are in reasonably good cosmetic condition and power on, but due to sustained damage, they are not fully operable and therefore, listed as Spares/Repair.

The damage sustained is as follows:

Part 1:

The front intake has completely broken off, with the back tray significantly buckled.

Part 2:

The rear of the device has sustained severe damage or deformation as a result of mishandling or being dropped.

The plugs have since been removed after testing the 32AMP.

£ 500.00 (ex. VAT) 1 in stock

Spellman Power Supply RSBX30X3077 Lab

ITEM-34855

Spellman Power Supply RSBX30X3077

Model: RSBX30X3077

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we are unable to test it at our facility.

Includes 9-pin FEMALE DIN Cable.

£ 500.00 (ex. VAT) 1 in stock

Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4

ITEM-21203

Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4

This unit came from an engineering university. It was used to develop and test for the motor industry. We were assured it was in good working order.

The Flange/Working Section External Dimension 56cm X 56cm

Included is a basic working section with two access panels. Approximate size of working section

56cm x 56cm X 100cm.

The Fan type is a K. Blackman 28 series.

The fan uses 7.5 kw Electric Motor with an inverter control.

It is split into 4 sections;

Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kg

Unit 2- Joint Section- 68cmx62cmx86cm.- 24 kg

Unit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kg

Unit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg.

Please enquire if you would like a delivery quote.

The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Britweld Compact Single Phase Mig Welding Unit Type - BR 151

ITEM-26283

This Britweld Compact Single Phase Mig Welding Unit was removed from a university lab where it was surplus to requirements.

We were unable to test it at our facility, but the university confirmed it was working when last used a few years ago.

It is in reasonably good cosmetic condition with some marks from use.

£ 495.00 (ex. VAT) 1 in stock

Anritsu Error Detector MP1653A Model M30278 Lab

ITEM-25566

This Anritsu Error Detector MP1653A Model M30278 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some tape and scuff marks from general use.

All buttons and dials are moving freely and appear responsive. The fans are operational.

£ 485.00 (ex. VAT) 1 in stock

22 x High Perfection LP1090-36-GG-290 36V DC Power Supplies

ITEM-25661

22 x High Perfection LP1090-36-GG-290

These were removed from a university lab where they were surplus to requirements.

The units are all inside open boxes and are all in good cosmetic condition.

We were unable to test them

Model LP1090-36-GG-290

Part No. 20-3406 REV: A

Power supply dims:

L32cm x W6cm, x H4cm

£ 455.00 (ex. VAT) 1 in stock

Rockwell Hardness Tester Model 4R

ITEM-36914

Rockwell Hardness Tester

This was removed from a university lab where it was surplus to requirements.

It is in reasonable cosmetic condition with marks from use.

It has not been tested.

£ POA 1 in stock

F.J. Edwards Sheet Metal Folder MC No. C-4277

ITEM-37216

This item is new in stock. Please enquire for further details.

£ 450.00 (ex. VAT) 1 in stock

Job lot of Flight Cases (Qty. 5) Airbus, LHT-HAM.

ITEM-37111

Job lot of Flight Cases (Qty. 5)

These items were removed from a University as they were surplus to requirements.

All flight cases are in reasonably good cosmetic condition, with some scuffs and scratches from general use.

All handles and clasps on the flight cases are in good working condition.

Included are the following:

Airbus Large White flight case

External Dims:

L76cm W133cm H41cm

Interior Dims

L70cm x W132cm x H36cm

LHT-HAM Long Black flight case

External Dims:

L44cm x W140cm x H39cm

Interior Dims:

L38cm x W133cm x H34cm

LHT-HAM Cubic Flight Case:

External Dims:

L71cm x W79cm x H59cm

Interior Dims:

L66cm x W75cm x H53cm

LHT-HAM Small Square flight case:

External Dims:

L37cm x W39cm x H26cm

Interior Dims:

L33cm x W37cm x H23cm

Airbus Small white flight case:

External Dims:

L25cm x W48cm x H25cm

Interior Dims:

L21cm x W45cm x H22cm

£ 450.00 (ex. VAT) 1 in stock

Axminster Hobby Series AWHBS350N Vertical Band Saw & Accessories

ITEM-44962

Axminster Hobby Series AWHBS350N Vertical Bandsaw

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in working order. Keys to power on are included. The item is in good, used cosmetic condition, with some yellow spray paint at the bottom.

Specifications:

Model: AWHBS350N
Serial No.: 13AM-037-01-18
Blade Speed: 660 & 720 m/min
Blade Length: 2,490 mm
Table Size: 50 x 40 cm
Wheel Diameter: 35 mm

Also includes:-

4 x Packs GT Bandsaw Blade (98") 2490mm (REF-508020) 1/4" X 10 TPI
4 x Packs GT Bandsaw Blade (98") 2490mm (REF-508019) 1/4" X 6 TPI
5 x Packs GT Bandsaw Blade (98") 2490mm (REF-508025) 1/2" X 4 TPI
6 x Packs GT Bandsaw Blade (98") 2490mm (REF-508027) 1/2" X 10 TPI
1 x Pack GT Bandsaw Blade (132") 3352mm (REF-105224) X 1/2" 6 TPI

Manual
Extractor pipe
5 x RS Single row seal 6mm (618-9913)
Pack of wooden discs
Spanner

NEW ITEM

£ 400.00 (ex. VAT) No longer available

Mettler Toledo FiveEasy F30 Conductivity Meter Lab

ITEM-37203

Mettler Toledo FiveEasy F30 Conductivity Meter Lab

This item was removed from a university where it was surplus to requirement.

The Mettler Toledo FiveEasy F30 is brand new in its original packaging, with one additional part being opened as stated below.

Included are:

Mettler Toledo FiveEasy F30 - Brand New.
LE Sensors Cat no. 51340335 - Opened/Excellent Condition.
The five series operating & installation instructions cd - Brand New.
12V Power supply with adaptors - Brand New.

£ 400.00 (ex. VAT) No longer available

3 x Spellman X3000 Power Supplies Lab

ITEM-34854

3 x Spellman X3000 Power Supplies

Model: X3000

These Spellman X3000 Power Supplies were removed from a university, where they were surplus to requirement.

The units are untested.

Individual Dimensions:

L34cm x W13cm x H8cm

£ 400.00 (ex. VAT) 1 in stock

Nikon Ne10 Digital Theodelite Lab

ITEM-24217

Nikon Ne10 Digital Theodelite

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and includes the original carry case shown in the image.

We are unable to test the item at our facility.

£ 400.00 (ex. VAT) 1 in stock

Gast Air Compressor BS5169 III E

ITEM-20164

Gast Oil-Less Air Compressor

This item was removed from a university laboratory where it was surplus to requirements.

This unit has been professionally serviced, the engineer report is available on request.

It is in good condition and features a reset button.

Specifications:

Code: BS5169 III E
Capacity: Approx. 25 litres
Serial No.: 0434
Test Pressure: 15 Bar
Design Pressure: 10 Bar
Temperature Range: -10°C to +100°C
Part No.: TUMD105/1

NEW ITEM

£ 395.00 (ex. VAT) 1 in stock

Job Lot of 21 Boxes of WintWire Welding Wire Size - 3.40 x 1.20 Mild Steel

ITEM-38991

Job Lot of 21 Boxes of WintWire Welding Wire Size - 3.40 x 1.20 Mild Steel

Job Lot of WintWire Welding Wire

21 x Boxes

Box info:-

CUST No. HPWAAM

Cast no. 89699

Weight - 11.9kg

S.O. - 16898/6

Size - 1.204 x 3.411 FRE

Quality - Profile Mild Steel

All looks new and unused though a box has been opened for photos.

£ 380.00 (ex. VAT) 1 in stock

Konrad Modrach Gera Metal Bending Tool with Dexion Guillotine

ITEM-36915

Konrad Modrach Gera Metal Bending Tool with Dexion Guillotine

This was removed from a university workshop where it was surplus to requirements.

The unit is in reasonably good cosmetic condition but has not been tested

£ 375.00 (ex. VAT) 1 in stock

Durr Technik 90L Oil Free Air Compressor

ITEM-35301

Durr Technik 90L Oil Free Air Compressor

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order.

It is in good cosmetic condition but the glass is missing from the gauge.

£ 360.00 (ex. VAT) 1 in stock

Solartron Schlumberger 7060 Systems Voltmeter Lab

ITEM-36721

This Solartron Schlumberger 7060 Systems Voltmeter was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further.

It is in good cosmetic condition with marks from use.

£ 360.00 (ex. VAT) 1 in stock

High Voltage Power Supply Units - Spellman Part no. X3230 - XSTAR - 1505S24HN

ITEM-27573

High Voltage Power Supply Units - Spellman Part no. X3230 - XSTAR - 1505S24HN

These were removed from another system.

None of the items have been tested.

Included are;

Martek Power 1505S24HN

Spellman Part no. X3230

SN - 49942-1-A00371

2 X STAR

063003

4339888 B

£ 355.00 (ex. VAT) 1 in stock

Thorlabs MDT690 3-Axis Piezo Controller Lab

ITEM-30268

This Thorlabs MDT690 3-Axis Piezo Controller was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further.

£ 350.00 (ex. VAT) 1 in stock

Sherwood M851 Air Compressor Lab

ITEM-44990

Sherwood M851 Air Compressor

This item was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition, powers on, and is fully functional.

£ 350.00 (ex. VAT) 1 in stock

Keith Blackman LTD Tornado Centrifugal Extraction Fan

ITEM-44960

Keith Blackman LTD Tornado Centrifugal Fan

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in working condition. We are unable to test it further at our facility

It is in reasonable cosmetic condition, with some parts spray-painted red and green.

Specifications:

Serial No.: U.566861
Motor No.: 559681
Date: 1962
RPM: 2900

£ 340.00 (ex. VAT) 1 in stock

Sokkisha Sokkia SET3C Surveying Total Station Lab

ITEM-27564

This Sokkisha Sokkia SET3C Surveying Total Station was removed from a university lab where it was surplus to requirements.

It comes in a case with a Manual, 2 x Batteries & Battery Charger.

The item powered on after charging the battery for a while and we were able to focus it.

Item is in a reasonable, used cosmetic condition.

£ 320.00 (ex. VAT) 1 in stock

Felder AF 12 Extraction Unit Lab

ITEM-35984

Felder AF 12 Extraction Unit

Model: AF-12

S/N: 401240/18/189

This was removed from a university workshop where it was surplus to requirements.

The unit powers up and is in good working order, the plug has since been removed.

Includes dust collection bag.

£ 315.00 (ex. VAT) 1 in stock

JDS SB Series Fiber Optic Switch Part No. SB16B5-C0FA Lab

ITEM-28389

This JDS SB Series Fiber Optic Switch Part No. SB16B5-C0FA was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

Included with ti are;

17x Fiber Optic Cables:

1x - 05/97 TB II

4x - 06/97 TB II

5x - 09/97 TB II

1x - 10/97 TB II

6x - 12/97 TB II

Length - 319cm

The units are in good cosmetic condition.

£ 305.00 (ex. VAT) No longer available

Brook Hansen Motor with Gearbox Type - 100

ITEM-27558

This Brook Hansen Motor with Gearbox Type - 100 was removed from a university lab where it was surplus to requirements.

The item is in a reasonable, used cosmetic condition but has not been tested. It requires a 3-phase plug to be fitted.

There is no on/off switch so we decided it wasn't safe to power up.

£ 300.00 (ex. VAT) 1 in stock

Elliott Progress No. 2GS Pedestal Floor Standing Pillar Drill Press

ITEM-42283

Elliot Progress No. 2GS Pedestal Floor Standing Pillar Drill Press

This item was removed from a university where it was surplus to requirements.

The previous owner reported that the drill was functional when last used a few years ago.

During testing, the following was observed:-

Powered on and ran at two configured speeds smoothly, with no undue noises or vibrations.

Press operated smoothly with the control lever.

Emergency stop button and safety cut-off for the top belt cover tested as working.

Workpiece platform and drill head height adjustable on the centre column.

Specifications:

Model: Progress No. 2GS
Serial No.: BEC 18978/862

Condition:

Good cosmetic condition
Passed a visual PAT test on 29.11.24

Notes:

No drill chuck included
3-phase 440-volt power supply
Speed range: 45 to 2460 rpm
Two-stage speed lever

Features:

Chuck guard
Drill bed: 33 x 33 cm
Adjustable main column: 61 cm range for head and bed
Swarf cover for foot stand

£ 300.00 (ex. VAT) 1 in stock

Sokkisha DT5 Electronic Digital Theodolite Lab

ITEM-38510

Sokkisha DT5 Electronic Digital Theodolite Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

This item does not include a power supply.

£ 300.00 (ex. VAT) 1 in stock

12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab

ITEM-37186

12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab

These items were removed from a university where they were surplus to requirement.

All items are in very good cosmetic condition and untested.

This listing comprises:

6 x Schmersal RST 36-1

Part#: 101213820

1 x Schmersal RSR 36-D-R-ST

Part#: 101213956

5 x Schmersal RSR 36-D-S7

Part#: 101213954

14 x SD-Y-ADAPTER

9152/2781406

2 x Small Cable AL-WAK8-2, 5-AL-WAS8/S370/S4000

8057201 9242/2797213

9 x Medium Cable AL-WAK8-1,5-AL-WAS8/S370/S4000

8057200 0225/3159235

16 x Large Cable AL-WAKA-0,5-AL-WAS8/S370/S4000

8057197 8311/2457690

£ 300.00 (ex. VAT) 1 in stock

Intellipower Uninterruptible IQ2000V-C-DiAC-Isol-PFC Power Supply Lab

ITEM-34890

Intellipower Uninterruptible IQ2000V-C-DiAC-Isol-PFC Power Supply Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

£ 300.00 (ex. VAT) 1 in stock

Lasos HeNe San 7460 Laser Power Supply Lab

ITEM-14235

Lasos San 7460 HeNe Laser Power Supply.

This item was removed from a lab during a clear out.

Lasos SAN 7460A.

Unit powers up.

It has not been tested any further.

Includes keys.

Unit was last tested Sept 2020.

Next test isn't due until 2020.

Unit is in good cosmetic condition.

Please see photos for further details.

£ 290.00 (ex. VAT) 1 in stock

Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 Without Key Lab

ITEM-25649

This Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are pen, tape and scratch marks from general use. 7 x screws missing from the housing on top of the unit.

We used one of our own keys that worked in the barrel to switch the unit on and off. All buttons appear to be responsive to the unit.

There is no key with it, but it requires a TOK Key - Mod No. 001

£ 265.00 (ex. VAT) 1 in stock

Hewlett Packard HP 8011A Pulse Generator Lab

ITEM-18285

This Hewlett Packard HP 8011A Pulse Generator was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in reasonably good cosmetic condition but has marks from use.

£ 255.00 (ex. VAT) 1 in stock

Dicon General Purpose Fibre Optic Switch Model GP700 Version 2.23 Lab

ITEM-25564

This Dicon General Purpose Fibre Optic Switch Model GP700 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are some scuffs from general use.

The unit ran a self-test once the unit started up. There was no further information on whether the unit passed or failed the self-test.

All buttons are responsive.

£ 250.00 (ex. VAT) 1 in stock

Gabro 4M2 Manual Guillotine and Notcher Engineering

ITEM-44951

Gabro Manual Guillotine and Notcher

This item was removed from a university where it was surplus to requirements.

The unit is in reasonably good cosmetic condition, showing various signs of wear and use. It is missing some bolts.

Specifications:

Dimensions: L136 x W130 x H222 cm

£ 250.00 (ex. VAT) 1 in stock

APC Smart-UPS 1500 With Smart Connect Power Device Lab

ITEM-44710

APC Smart-UPS 1500 With Smart Connect Power Device Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 250.00 (ex. VAT) 1 in stock

SANDVIK Coromant CoroChuck 930

ITEM-40003

SANDVIK Coromant CoroChuck 930

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition.

£ 250.00 (ex. VAT) 1 in stock

Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab

ITEM-38507

Pentax R-125N Prismless Total Station Theodolite Distance Metre Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

This item does not include a power supply.

£ 225.00 (ex. VAT) 1 in stock

Mitsubishi Graphic Operation Terminal Panel GOT1000 Model - GT1275-VNBD

ITEM-28172

This Mitsubishi Graphic Operation Terminal Panel GOT1000 Model - GT1275-VNBD was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has a small scratch in the top right corner.

It has not been tested.

£ 220.00 (ex. VAT) 1 in stock

13 x Flexlight Networks Optimate Units - 2500LT - 510NT - 530NT & Brackets

ITEM-25558

13 x Flexlight Networks Optimate Units

These were removed from a university lab where they were surplus to requirements.

1x OPtimate 2500

Model OPtimate2500LT

P/N 2500CHASS0000000D1

The unit is in good cosmetic condition. We were unable to power the unit without the correct power source.

510NT units:

Model Optimate510NT

4x P/N 0511-00-200

2x P/N 0511-T1310R149001D1

The unit is in good cosmetic condition. We were unable to power the unit without the correct power source.

530NT

Model Optimate530NT

5x P/N 0530-00-100

The unit is in good cosmetic condition. We were unable to power the unit without the correct power source.

Accessories:

6x brackets

6x rack mount brackets P/N PASM05002

2x Optimate 2500LT Optical drawers

2x rack clips

£ 215.00 (ex. VAT) 1 in stock

Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 with Key Lab

ITEM-25645

This Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are pen, tape and scratch marks from general use.

11x screws are missing from the top of the housing of the unit. All buttons appear to be responsive.

£ 210.00 (ex. VAT) 1 in stock

Nortel Erbium Doped Fiber Amplifier with Key Lab

ITEM-25643

This Nortel Erbium Doped Fiber Amplifier was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition with marks and scratches. 10 screws are missing from the top of the housing of the unit. All buttons appear to be responsive.

TOK Key:

Mod No. 001

£ 210.00 (ex. VAT) 1 in stock

Brandenburg Alpha Series Model: 507R High Voltage Power Supply Lab

ITEM-20755

This Brandenburg Alpha Series Model: 507R High Voltage Power Supply was removed from a university lab where it was surplus to requirements.

The item is in reasonable cosmetic condition but it has scratches and chipped paint on its handles.

The item didn't power on. The fuse in the plug was changed but didn't have an effect.

£ 205.00 (ex. VAT) 1 in stock

Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 Lab

ITEM-25647

This Nortel Erbium Doped Fiber Amplifier Model FA17UFAC-119C28 was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. There are pen, tape and scratch marks from general use.

8 x screws are missing from the top of the housing of the unit. All buttons appear to be responsive.

£ 200.00 (ex. VAT) No longer available

4 x Hanna HI 83141 PH Meters Lab

ITEM-45211

Hanna HI 83141 pH Meters (Set of 4)

These items were removed from a university lab where they were surplus to requirements.

All units power on and are in fair cosmetic condition, each housed in its original box. Unable to test further.

Quantity: 4

Model: HI 83141

£ 200.00 (ex. VAT) 1 in stock

Denford Machine Tools Ltd Viceroy Pillar Drill Lab

ITEM-41112

Denford Machine Tools Ltd Viceroy Pillar Drill

This item was removed from a university workshop where it was surplus to requirements.

The drill is in reasonably good cosmetic condition.

A plug was fitted temporarily for testing purposes but has since been removed. It powers on and appears to function as intended during testing.

It is 16A 3-phase 4-pin

This drill is sold as-is and will require professional installation to ensure proper and safe functionality.

Engineering

Filters