Engineering
Items 51 to 100 of 205
£ 1,250.00 (ex. VAT) 1 in stock
B.O.B 610 RBG Stevenson Space Heater Lab
ITEM-41644
B.O.B 610 RBG Stevenson Space Heater Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 1,235.00 (ex. VAT) 1 in stock
Struers LaboPol-1 Polishing Machine Lab
ITEM-34939
This Struers LaboPol-1 Polishing Machine was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in reasonable cosmetic condition but is well used.
£ 1,200.00 (ex. VAT) 1 in stock
13 x GW INSTEK GDS-1022 Digital Storage Oscilloscope with Probes Job-Lot Lab Lab
ITEM-38502
13 x GW INSTEK GDS-1022 Digital Storage Oscilloscopes with Probes
These units were removed from a university lab where they were surplus to requirements.
The units are in good condition with minimal wear. All units have been powered on, and each comes with the appropriate GTP-060A-4 Voltage Probe.
Includes - 14 x GTP-060A-4 Voltage Probe
Specifications:
- Line Voltage Range: AC 100-240V
- Frequency: 50-60Hz
- Fuse Rating: T1A 250V
- Power Max: 18W 40VA
£ 1,200.00 (ex. VAT) 1 in stock
Instron 5543 Single Column Table Top Tensile Tester System Spares/Repairs
ITEM-25140
Instron 5543 Single Column Table Top Tensile Tester System Spares/Repairs
This was removed from a university lab where it was surplus to requirements.
The unit did not power up in testing. It is sold for spares/repairs.
Included are the following;
Accessories.
1x lockable tool chest with misc bit items inside.
1x user manual
1x Materials testing quick guide (laminated)
1x home made timer box (plug removed)
1x Transducer unit
£ 1,150.00 (ex. VAT) 1 in stock
Jun-Air Model 6/6-4 Quiet Running Compressor Lab
ITEM-41411
Jun-Air Model 6/6-4 Quiet Running Compressor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on.
We are unable to test it further at our facility.
£ 1,080.00 (ex. VAT) 1 in stock
AT Delta-T Logger System with Software & Accessories Lab
ITEM-25021
This was removed from a university lab where it was surplus to requirements.
The system is in reasonable cosmetic condition. There are stains and other marks along the edges and surface. The atmospheric temperature & humidity probe is dented.
The item is untested as it wasn't supplied with a PSU.
Also included are the following:
1x Delta-T Devices atmospheric temperature & humidity probe
S/N: RHAI-077
1x Delta-T PC software type LS2
Version 1.04
1x Desiccant Pack
1x DE-9 cable
1x Tutorial Kit
1x Spares & Accessory Pack
3x Component part (EMC directive) 5m
5x Temperature Probes User Manual
1x Quantum Sensor User Manual
1x Delta-T Devices Data Loggers, Sensors & Systems
1x Delta-T Devices Plant Science & Solar Radiation Studies
1x Delta-T Devices Image Analysis Systems
1x Delta-T Logger User Manual Version 2.01
£ 1,080.00 (ex. VAT) 1 in stock
Mettler Toledo DA-100M Density Meter Lab
ITEM-35284
This Mettler Toledo DA-100M Density Meter was removed from a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
It is in reasonable cosmetic condition but has marks and rusting from use.
£ 1,045.00 (ex. VAT) 1 in stock
Thermo IEC Scientific French Press Model FA-078AE Lab
ITEM-20165
This Thermo IEC Scientific French Press Model FA-078AE was removed from a university lab where it was surplus to requirements.
The unit powers up but it has not been tested further. The ratio selector control knob is missing.
It is in reasonably good cosmetic condition but has some surface rust and some marks from use.
£ 1,000.00 (ex. VAT) 1 in stock
Integrated Measurement Systems IMS MSTS FT Test Station MSTS1 Lab
ITEM-17219
This unit came out of an engineering university. This unit had been in storage for a while but we were informed that it did operate correctly the last time it was used.
Item is in a good used condition with only minor marks.
It is supplied with four additional circuit boards.
Details:
IMS open/custom interface board, 110-0337-003 REV A.
IMS LBV DIB board, 120-0577-000 REV A.
Force Autocal, US2/97 03080, MSTS1 FT.
Charles Water CP304 zip-stat, A11117DD.
The PSU unit has a castor missing.
Item has not been powered on or tested in any way.
Integrated Measurement Systems Test Station.
Model: MSTS1 Blazer.
Serial No: 001036.
Circuit board fitted: IMS mixed signal quad demo board, 100-0478-000.
Supplied with:
ONEAC Power supply.
Model: CSD31150SPL.
Serial No: 9723-3726.
£ 1,000.00 (ex. VAT) 1 in stock
Powertecnique Uninterruptable Three-Phase Power Supply & Battery Box Lab
ITEM-20369
This Powertecnique Uninterruptable Three-Phase Power Supply & Battery Box was removed from a university lab where it was surplus to requirements.
This was last serviced december 2019. We understand they were in use until at least 2021, but may have been offline for some time so it is possible the batteries perform poorly.
The UPS powers up but has not been tested further. We were unable to test the battery box.
They are in reasonably good cosmetic condition but have some marks from use.
£ 1,000.00 (ex. VAT) 1 in stock
B.O.B Stevenson Type 7736 MN 40500 Centrifugal Fume Extraction Fan
ITEM-41461
B.O.B Stevenson Type 7736 MN 40500 Centrifugal Fume Extraction Fan
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
£ 1,000.00 (ex. VAT) 1 in stock
B.O.B Stevenson Type 65461 MN 80450 Centrifugal Fume Extraction Fan
ITEM-41462
B.O.B Stevenson Type 65461 MN 80450 Centrifugal Fume Extraction Fan
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Dynamotive Control Box with Control Techniques Module lab
ITEM-41468
Dynamotive Control Box Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to power it on or test it further at our facility. It has no power cable.
Therefore, it is listed as Spares/Repair.
This item includes the frame it's sat on
-Frame Dimensions: (40x80x60cm)
The key is not included but can be opened with a control cabinet key.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Integrated BMS Jet Nozzle Test Facility -CP3 Lab Spares/Repairs
ITEM-41471
Integrated BMS Jet Nozzle Test Facility -CP3 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable.
Therefore, it is listed as Spares/Repair.
Includes operation keys.
Door key not included but can be opened with a standard control cabinet key.
£ 1,000.00 (ex. VAT) 1 in stock
B.O.B Stevenson LTD 4047 MN 80355 Centrifugal Fume Extraction Fan Lab
ITEM-41647
B.O.B Stevenson LTD 4047 MN 80355 Centrifugal Fume Extraction Fan Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
INDENTEC Hardness Testing Machine 5030SKV Lab Spares/Repairs
ITEM-34831
INDENTEC Hardness Testing Machine Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use.
It is listed as Spares/Repair.
Also included:
Calibration Certificate
User Manual
Optic Head
£ 985.00 (ex. VAT) 1 in stock
Vickers-Armstrong Pedestal Hardness Tester Lab
ITEM-37040
Vickers-Armstrong Pedestal Hardness Tester
This was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition with marks from use.
The system is mechanically sound, but we were told by the lab that the diamond might be damaged. We have been unable to confirm or deny this.
£ 965.00 (ex. VAT) 1 in stock
Thomson DuraTRUE 115 Linear Micron Gear Motor Ratio:250:1 Y-Axis
ITEM-30594
Thomson Linear Micron DuraTRUE 115 Gear Motor Ratio:250:1 X-Axis
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with marks from use but has not been tested.
£ 955.00 (ex. VAT) 1 in stock
Thomson Linear Micron DuraTRUE 115 Gear Motor Ratio:250:1 X-Axis
ITEM-30593
Thomson Linear Micron DuraTRUE 115 Gear Motor Ratio:250:1 X-Axis
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition with marks from use but has not been tested.
£ 955.00 (ex. VAT) 1 in stock
Thomson Linear Micron DuraTRUE 90 Right Angle Gearhead Ratio:250:1 Y-Axis
ITEM-30595
Thomson Linear Micron DuraTRUE 90 Right Angle Gearhead Ratio:250:1 Y-Axis
This was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but has not been tested.
£ 940.00 (ex. VAT) 1 in stock
FB Fans & Blowers Ltd Centrifugal Fan Type 400 (350) SBSZ100 & Controller
ITEM-38892
FB Fans & Blowers Ltd Centrifugal Fan Type 400 (350) SBSZ100
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order to 3250rpm
It is in good cosmetic condition with minor marks.
£ 910.00 (ex. VAT) 1 in stock
ATI Portasens lll Gas Leak Detector Kit Model D16 w/ H2O2 Sensor Lab
ITEM-38095
ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.
The gas leak detection kit contains the following items:
1 x main D16 detection unit
1 x ATI H2O2 sensor
1 x H10 Sensor Keeper 00-0981
1 x Sampling Wand for localised detection
2 x Tenenergy 10,000 mAh NiMH rechargeable batteries
1 x Intellicharger Newi2 charger with power cable
1 x Dwyger Instuments Minimaster flow meter
1 x calibration t-fitting
1 x filters
1 x 1/4" straight connector
1 x USB cable
1 x hard carry case
£ 905.00 (ex. VAT) 1 in stock
ATI Portasens lll Gas Leak Detector Kit Model - D16 w/ H2O2 Sensor Lab
ITEM-38094
ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.
The gas leak detection kit contains the following items:
1 x main D16 detection unit
1 x ATI H2O2 sensor
1 x H10 Sensor Keeper 00-0981
1 x Sampling Wand for localised detection
2 x Tenenergy 10,000 mAh NiMH rechargeable batteries
1 x Intellicharger Newi2 charger with power cable
1 x Dwyger Instuments Minimaster flow meter
1 x calibration t-fitting
3 x filters
1 x 1/4" straight connector
1 x USB cable
1 x hard carry case
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 900.00 (ex. VAT) 1 in stock
Job Lot of Spellman High Voltage Power Supplies Lab
ITEM-38560
Job Lot of Spellman High Voltage Power Supplies.
This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.
None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.
The units have not been tested at all.
7 x Model: X3000.
Serial No: 0732M-1-5252, 0732M-1-5275, 0728M-1-5218, 0728M-1-5212, 0728M-1-5193, 0728M-1-5205, 0726M-1-5181.
1 x Model: X3362.
Serial No: 51645-1-A00141.
1 x Model: X3363.
Serial No: 51797-1-A00495.
1 x Unknown unit (Information plate damaged).
Serial No. 37822-4-A00011.
£ 890.00 (ex. VAT) 1 in stock
Profile Pro 8000 Module Chassis with 8x WDM sources & Key Lab
ITEM-28391
This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition.
Revision. 4.44
Interface: 1.22
8x WDM sources
It comes with;
1 x Kaba Micro- E Key Model No. ED9001
£ 890.00 (ex. VAT) 1 in stock
ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab
ITEM-38096
ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powered up, we are unable to test it further at our facility.
Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter.
The gas leak detection kit contains the following items:
1 x main D16 detection unit
1 x ATI H2O2 sensor
1 x H10 Sensor Keeper 00-0981
1 x Tenenergy 10,000 mAh NiMH rechargeable battery
1 x calibration t-fitting
3 x filters
1 x 1/4" straight connector
1 x USB cable
1 x hard carry case
£ 885.00 (ex. VAT) 1 in stock
Thorlabs Profile Pro 8000 Module Chassis with 6x WDM sources and Key Lab
ITEM-28392
This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requirements.
The unit powers up and one of the 6 WDM sources is showing an error light. The rest seem to be functioning.
It is in good cosmetic condition with marks from use.
Rev: 4.44
Kaba Micro- E Key
Model No. ED9001
£ 855.00 (ex. VAT) 1 in stock
APC UPS Uninterruptible Power Supply Model SRT6KXLI
ITEM-37002
APC UPS Uninterruptible Power Supply Model SRT6KXLI
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in good cosmetic condition with minor marks.
£ 835.00 (ex. VAT) 1 in stock
Jun-Air Oiless Piston Air Compressor OF301-4B Lab
ITEM-36894
Jun-Air Oiless Piston Air Compressor OF301-4B
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. It is supplied with a manual.
It is ing good cosmetic condition with minor marks.
£ 810.00 (ex. VAT) 1 in stock
Wykeham Farrance Oedometer CBR Testing Lab
ITEM-34568
This Wykeham Farrance Oedometer CBR Testing was removed from a university lab where it was surplus to requirements.
The unit powers up the hand control unit works correctly, and the hydraulic ram goes up and down freely.
It is in reasonable cosmetic condition with marks from use.
£ 800.00 (ex. VAT) 1 in stock
Slee London Model DS Vacuum Vice Precision Measuring Tool w/ DTI Gauge
ITEM-45321
Slee London Model D2 Vacuum Vice Precision Measuring Tool DTI
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good mechanical order, we are unable to test it fully at our facility.
It features an external vacuum connector valve and a DTI gauge.
£ 800.00 (ex. VAT) 1 in stock
Wild Heerbrugg Tachymat TC1000 Digital Theodolite Lab
ITEM-24218
Wild Heerbrugg Tachymat TC1000 Digital Theodolite
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and includes the original carry case shown in the image.
We are unable to test the item at our facility.
£ 800.00 (ex. VAT) 1 in stock
ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab
ITEM-38093
ATI Portasens lll Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.
The gas leak detection kit contains the following items:
1 x main D16 detection unit
1 x ATI H2O2 sensor
1 x H10 Sensor Keeper 00-0981
1 x Sampling Wand for localised detection
2 x Tenenergy 10,000 mAh NiMH rechargeable batteries
1 x Intellicharger Newi2 charger with power cable
1 x Dwyger Instuments Minimaster flow meter
1 x 1/4" straight connector
1 x USB cable
1 x hard carry case
£ 800.00 (ex. VAT) 1 in stock
Kerry's LTD Keetona Metal Roller Bending Rolls
ITEM-44952
Keetona Metal Roller
This system was removed from a university lab where it was surplus to requirements.
The unit is in reasonable, used cosmetic condition with no visible model or serial numbers.
Specifications:
- Roller length: 102 cm
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Riello Model S3T 20 XTD T5 Lab Spares/Repairs
ITEM-38020
Riello Model S3T 20 XTD T5 Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition, but we are unable to power it on as it was originally hard wired and as a result, it does not include a plug.
Therefore, it is listed as Spares/Repair and would require a plug attached to attempt to power it on.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Riello S3T 20 XTD T5 UPS Power Supply Lab Spares/Rpeairs
ITEM-38021
Riello S3T 20 XTD T5 Power Supply Lab
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition, we are unable to test it as it was originally hardwired and has since had its power housing removed.
Therefore, it is listed as Spares/Repair.
Power supply cable not included.
£ 745.00 (ex. VAT) 1 in stock
Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 & Welded Air Receiver
ITEM-19840
This Gast 5H Series Air Compressor Model - 5HCE-790D-M501X-1 was removed from a university lab where it was surplus to requirements.
The unit powers up and builds pressure but has not been tested further. It works well.
It is in good cosmetic condition with minor marks.
£ 725.00 (ex. VAT) 1 in stock
Murex Transtig AC/DC 355 Square Wave Welder
ITEM-30285
Murex Transtig AC/DC 355 Square Wave Welder
This was removed from a university where it was surplus to requirements.
We were unable to test the unit as it requires 3 Pin 660 Volts/60 Amps, which we do not have at our facility.
It is sold as untested.
£ 700.00 (ex. VAT) 1 in stock
Mitsubishi Freqrol - A500 Inverter Lab
ITEM-31520
Mitsubishi Freqrol - A500 Inverter Lab
Model: FR-A520-3. 7K
This item was removed from a university where it was surplus to requirement.
It is in reasonably good cosmetic condition.
We are unable to test this item as it requires a connection to a larger system.
£ 700.00 (ex. VAT) 1 in stock
4 x APC Smart-UPS Line Interactive 2200VA Tower 230V Lab
ITEM-37183
4 x APC Smart-UPS Line Interactive 2200VA Tower 230V Lab
These items were removed from a university lab, where they were surplus to requirement.
All items are in very good cosmetic condition and powered up, all items display 0% Battery, therefore we are unable to test them further.
Model: Smart UPS 2200
£ 700.00 (ex. VAT) 1 in stock
Betol Model 1307 Granualator Lab
ITEM-38029
Betol Model 1307 Granualator
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Items details are as follows:
Model: 1307.
Serial No: A 5228.
Volts: 240.
Phase: 1.
Kw: 1.5.
£ 700.00 (ex. VAT) 1 in stock
Jun-Air 12-50 Dental Lab Air Compressor 50 Litre Receiver Lab
ITEM-38062
Jun-Air 12-50 Dental Lab Air Compressor 50 Litre Receiver
This item was removed from a university where it was surplus to requirement.
It is in very good cosmetic condition and in good working order.
Product Details:
50-litre receiver
Max pressure 8 bar
Displacement 100 l/min
Low 48 dB noise level
0-8 bar in 425 seconds
Dimensions 86 x 42 x 75 (l x w x h)
Weight 52kg
Also Includes:
Operator manual
2 x 500ml bottles of synthetic compressor oil
£ 700.00 (ex. VAT) 1 in stock
Pfeiffer TCP040 Power Supply Lab
ITEM-41313
Pfeiffer TCP040 Power Supply
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, it is untested as we are unable to test it further at our facility.
Run Time: 10797.0
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 700.00 (ex. VAT) 1 in stock
GuySon Sandblaster Model- 800 GloveBox And Filter Spares/Repairs
ITEM-41458
GuySon Sandblaster Model- 800 GloveBox And Filter
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, and powers on. However, the motor requires manual assistance to start, and the suction is very weak.
It is likely that a new motor or extraction unit is needed for optimal performance.
Therefore, this item is listed as Spares/Repair.
SandBlaster:
Model- 800
S/N- 88066
Also includes:
Filter:
Model- 40DC
S/N- 08875
£ 700.00 (ex. VAT) 1 in stock
Dräger X-am 5100 Gas Analyser Lab
ITEM-41865
Dräger X-am 5100 Gas Analyser Lab
This item was removed from a university where it was surplus to requirement.
It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.
This item includes the charging dock and additional Type E, Type I and Type A plug fittings.
£ 700.00 (ex. VAT) 1 in stock
Dräger Model X-am 5100 Gas Analyser Lab
ITEM-41866
Dräger X-am 5100 Gas Analyser Lab
This item was removed from a university where it was surplus to requirement.
It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.
This item includes the charging dock and additional Type E, Type I and Type A plug fittings.
£ 700.00 (ex. VAT) 1 in stock
Dräger Type X-am 5100 Gas Analyser Lab
ITEM-41867
Dräger X-am 5100 Gas Analyser Lab
This item was removed from a university where it was surplus to requirement.
It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.
This item includes the charging dock and additional Type E, Type I and Type A plug fittings.
£ 700.00 (ex. VAT) 1 in stock
Dräger X-am Model 5100 Gas Analyser Lab
ITEM-41868
Dräger X-am 5100 Gas Analyser Lab
This item was removed from a university where it was surplus to requirement.
It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.
This item includes the charging dock and additional Type E, Type I and Type A plug fittings.
£ 700.00 (ex. VAT) 1 in stock
Denford Microrouter V5 Pro CAM CNC System with Software
ITEM-44931
Denford Microrouter V5 Pro
This system was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. The vacuum pump is functional. However, we are unable to conduct further testing at our facility.
Included:
- Denford Update Disc
- Denford Disc
- Denford QuickCam Pro CAM Software
- Denford VR CNC Milling Software
- Denford CNC Projects Suite Milling
- Denford QuickCam 4D Milling CAM Software
- User's Manual
- Denford CAD/CAM Design Challenge
£ 700.00 (ex. VAT) 1 in stock
ESEWAY Hardness Tester SPV2P Lab
ITEM-45098
ESEWAY Hardness Tester SPV2P
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Items 51 to 100 of 205