Centrifuges
Items 101 to 122 of 122
£ 435.00 (ex. VAT) 1 in stock
Sigma 3 K 18 Refrigerated Laboratory Centrifuge Lab
ITEM-29721
This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed.
It is in reasonably good cosmetic condition with minor marks from use.
£ 350.00 (ex. VAT) 1 in stock
Jouan CR4-22 Benchtop Refrigerated Centrifuge Spares/Repairs
ITEM-45102
Jouan CR4-22 Benchtop Refrigerated Centrifuge With Swinging Bucket Rotor
This item was removed from a university lab where it was surplus to requirements.
The centrifuge powers on and is in fair cosmetic condition. The rotor did not reach the maximum RPM of 4750, stalling at 4100 RPM.
It has been temperature tested. (Thermometer not included.)
Due to the inability of reaching its max RPM, this centrifuge is listed as Spares/Repair.
Includes:
- Jouan bucket rotor
- 4 x 85220020 buckets
- 4 x swinging plates
- 4 x bucket inserts for 50ml tubes
- 4 x bucket inserts for 25ml tubes
£ 300.00 (ex. VAT) 1 in stock
Heraeus Biofuge 13 Centrifuge Lab
ITEM-37826
This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.
We are unable to test this item further at our facility.
18 sample holders.
£ 300.00 (ex. VAT) 1 in stock
MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab
ITEM-36610
MSE Falcon 6/300 Centrifuge
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.
This item also includes the following:
1 x Mistral MSE Rotor - 43124
- Capacity: 4 x 750ml
- SN: 986766
- Max RPM: 2500
- (There are no rotor buckets included)
£ 300.00 (ex. VAT) 1 in stock
Beckman Microfuge 22R Refrigerated Centrifuge with F241.5P 14000rpm Rotor Lab
ITEM-23948
This Beckman Microfuge 22R Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.
This unit came out of a working laboratory where it was in use until recently. The unit is in very good condition with very few marks.
We powered the unit on with no issues and it worked at 14000 rpm smoothly. The display screen is in very good condition with clear figures. There is a slight squeal when running. It has been fully temperature tested and is in working order.
The rotor is a F241.5P with 24x2 mL / 11x39 mm(24x2 mL / 0x2 in) tube apertures angled at 45 degrees. The plastic lid fits securely and has no damage.
£ 285.00 (ex. VAT) 1 in stock
Hermle Z 400 Benchtop Centrifuge with Rotor Lab
ITEM-37869
This Hermle Z 400 Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 12500rpm.
It is in reasonable cosmetic condition with marks from use.
£ 280.00 (ex. VAT) No longer available
Fisher Scientific accuSpin Micro with 13000rpm Rotor Cat No. 75003245 Lab
ITEM-25990
This Fisher Scientific accuSpin Micro with 13000rpm Rotor was removed from a university lab where it was surplus to requirements.
The unit is in good used cosmetic condition but it does have various signs of general use.
The lid opens, the brake is working and all buttons appear to be responsive. The LCD screen is working and displays clearly.
The unit has been tested up to the max speed of 13,000rpm. It runs smoothly and as it should.
The rotor included is a;
Heraeus Rotor Model #3325B
•F 178953 PP 3/00
• Max Speed 13000 rpm
• Max load 24x4g
24x 2.0 tube flat cap holders
£ 270.00 (ex. VAT) No longer available
Eppendorf 5417C Benchtop Centrifuge with Aerosoltight GE 035 11/01 Rotor Lab
ITEM-30269
This Eppendorf 5417C Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 20,800rpm but is a little loud at max speed.
It is in reasonably good cosmetic condition but has a small crack on the bottom left of the unit.
It is fitted with an Eppendorf Aerosoltight GE 035 11/01 Rotor which holds 30 x 2ml tubes
£ POA 1 in stock
MSE Mistral 2000 Bench Top Centrifuge Lab
ITEM-37353
This item is new in stock. Please enquire for further details.
£ 250.00 (ex. VAT) 1 in stock
Shandon Cytospin 3 Cytocentrifuge with Rotor CAT/N 740 00211 Lab
ITEM-45389
Shandon Cytospin 3 Cytocentrifuge with Rotor CAT/N 740 00211 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order when tested to 2000RPM (Max).
Specifications:-
- Model: Cytospin 3
- S/N: 4000211
£ 250.00 (ex. VAT) 1 in stock
Sigma 4-15 Benchtop Centrifuge with Sigma Swing Bucket Rotor and Buckets Lab
ITEM-42158
Sigma 4-15 Benchtop Centrifuge with Sigma Swing Bucket Rotor and Buckets
This item was removed from a university lab where it was surplus to requirements.
The centrifuge and rotors are in good cosmetic condition and good working order.
Includes the following:
- Sigma Centrifuge model: 4-15
- Serial No.: 107405
- Part No.: 10730
- Year: 2004
- Max speed: 13,500 rpm
- Sigma Swing Bucket Rotor:
- Model No.: 1150 19/D
- Max speed: 5100 rpm
- Max weight: 4 x 200g
- Buckets:
- 4 x Sigma 13350 Swinging Buckets (277/D, 666g)
- Tube Holders:
- 4 x Sigma 90147 Tube Holders (347g, 10 x 22mm tube positions)
£ 230.00 (ex. VAT) 1 in stock
Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge with Rotor Lab
ITEM-25267
This Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge was removed from a university lab where it was surplus to requirements.
The item powers on and is in working order with the speed running up to 4000rpm.
The item is in a reasonable, used cosmetic condition.
It is fitted with a Fanem Rotor with 8 x 15ml Yellow buckets
£ 195.00 (ex. VAT) 1 in stock
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes Lab
ITEM-36134
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes
This was removed from a university lab where it was surplus to requirements
The unit was tested at 2800 rpm at 50 Hz, and 3500 rpm at 60 Hz. It ran at both speeds without an issue.
Itt comes with a choice of interchangeable rotors for different microtube sizes/combinations 0.5/0.2/1.5
It is in excellent cosmetic condition.
Item also includes:
2 x Protein LoBind Tube 0.5mL
100 Safe-Lock Tubes
Cat#: 022431064
DNA LoBind Tube 0.5mL
500 Safe-Lock Tubes
Cat#: 0030 108 400
DNA LoBind Tube 1.5mL
250 Safe-Lock Tubes
Cat#: 022431021
£ 145.00 (ex. VAT) 1 in stock
Heraeus Biofuge Pico Centrifuge with 3324 Rotor Lab
ITEM-25991
This Heraeus Biofuge Pico Centrifuge with 3324 Rotor was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. There are some light tape marks from general use. The lid opens, the brake works and all buttons appear to be responsive. The LCD screen is working and displays clearly.
The unit was tested at the max speed of 13000rpm and ran smoothly.
The unit has the following rotor fitted;
Heraeus Rotor #3324
•PP1/96
•Max Speed 13000rpm
• Max load 24x4g
•24x 2.0 flat cap tube holders.
No further testing done.
£ 145.00 (ex. VAT) 1 in stock
Jouan A-14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor Lab
ITEM-20120
This Jouan A14 Benchtop Laboratory Centrifuge Type: 11174542 with 14000rpm Rotor was removed from a university lab where it was surplus to requirements.
The unit is in good cosmetic condition but it has some light stains on the lid and side panels. The Interior and rotor are clean.
The rotor has 20 sample spaces, it accepts 2ml vials. It is rated at 14000rpm.
It powers up fine and has been tested at a few different speeds. The numbers don't necessarily match up with the RPM of the unit.
Set at 3, the centrifuge hit 5800 RPM.
Set to 9, the centrifuge hit 11500 RPM.
Set to max of 14000, the centrifuge hit 14200 RPM.
£ 100.00 (ex. VAT) 1 in stock
Centurion Cell-Prep 4050 Benchtop Centrifuge Lab
ITEM-32099
Centurion Scientific Centrifuge 4050 Series Cell-Prep
This item was removed from a university laboratory where it was surplus to requirements.
The centrifuge is in reasonable cosmetic condition, with visible signs of wear and some rust.
It powers on without issue and has been tested to operate at 50 RPM, 100 RPM, and its top speed of 200 RPM.
Included Components:
- 12-bay centrifuge rotor
- 1x balance weight
Specifications.
- Model: 4050 Series Cell-Prep
- Serial No.: 98042157
£ POA 1 in stock
IEC CL3-R Bench Top Centrifuge Lab
ITEM-37356
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Sanyo Mistral 3000E Centrifuge with Windshield Swing Rotor and Buckets on Stand
ITEM-42321
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Eppendorf 5415 R Refrigerated Benchtop Centrifuge w/ F-45-24-11 Rotor Lab
ITEM-45460
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Digicen 21 Table Top Centrifuge Lab
ITEM-37385
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Sorvall RC 6+ Floor Standing Centrifuge Thermo Scientific FiberLite Rotor Lab
ITEM-37326
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Beckman Coulter Optima LE-80K Ultracentrifuge
ITEM-24728
This item is new in stock. Please enquire for further details.
Items 101 to 122 of 122