Centrifugation

£ 1,235.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0R Refrigerated Centrifuge With 2800RPM Rotor

ITEM-39094

Heraeus Megafuge 1.0R Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. The refrigeration was tested at 4˚C and worked well.

It is in good cosmetic condition with marks from use.

Rotor max RPM- 2800

The rotor holds 24 x 15ml tubes

RECERTIFIED ITEM

£ 1,150.00 (ex. VAT) 1 in stock

Heraeus Function Line Labofuge 400R Centrifuge Lab

ITEM-45134

Heraeus Function Line Labofuge 400R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. It includes a swinging bucket rotor with four buckets and has been tested for temperature stability at high speed.

The rotor is locked in place and cannot be removed, but is fully functional.

Testing:

Successfully set to 4ºC and held for 30 minutes at, 4500RPM
Successfully set to 37ºC and held for 30 minutes at, 4500RPM

Specifications:

Model: 400R
Serial No.: 75008162

Included:

Swinging bucket rotor with 4 x buckets (75008172)

£ 1,100.00 (ex. VAT) 1 in stock

IEC CL3-R Bench Top Centrifuge with 4800rpm Rotor IEC 243 Lab

ITEM-37356

IEC CL3-R Bench Top Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, however we were unable to remove the rotor from inside.

Includes:

IEC 243 Four-Place Swinging-Bucket Rotor (includes 4 Buckets).

Max. Force: 3200xG
Capacity: 4 x 250mL
Max. Speed: 4000rpm.

£ 1,040.00 (ex. VAT) 1 in stock

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor Lab

ITEM-35715

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor

This was removed from a university lab where it was surplus to requirements.

The item is in very good cosmetic condition and also includes its original carry case and Carbon Fiber Rotor Care Kit for this specific model.

Items features are as follows:

15000rpm

24,700 X G

6x 100ml tube holders

Quick release autolock

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter JS-5.3 Centrifuge Swing-Out Rotor w/ 4 x JS 5.3 Buckets Lab

ITEM-46888

Beckman Coulter JS-5.3 Centrifuge Rotor w/ 4 x JS 5.3 Rotor Buckets Lab

This items was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, it has not been tested.

Included;

4 x JS 5.3 Rotor Bucket

£ 1,000.00 (ex. VAT) 1 in stock

Lot Of Heraeus Centrifuge Rotor Buckets & Adapters #7570 E #8030 Lab

ITEM-41487

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab

These items were removed from a university lab where they were surplus to requirement.

All items are in good cosmetic condition but have not been tested.

The items included are as follows:

4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g)
3 x Heraeus #8030 Rotor Buckets (max capacity of 510g)
3 x Tube Holders For 15-25ml Tubes
4 x Tube Holders 50ml Tubes

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs

ITEM-34798

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-HC Centrifuge Lab Spares/Repairs

ITEM-31551

Beckman Coulter Avanti J-HC Centrifuge

This item was removed from a university lab where it was surplus to requirements.

The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted.

The spindle is bent.

Therefore, it is listed as Spares/Repair.

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter JA-14 Fixed Angle Rotor Lab

ITEM-42062

*No email thread or information provided on project page*

Beckman Coulter JA-14 Fixed Angle Rotor

This item was removed from a university lab where it was surplus to requirements.

The unit is in good condition with some wear. No further testing has been conducted.

Specifications:

Max RPM: 14,000
Model: JA-14
Serial No.: 95E 2155
6 x 500 mL

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter JA-14 Fixed Angle Rotor 6x250ml 14000RPM Lab

ITEM-46143

Beckman Coulter JA-14 Fixed Angle Rotor 6x250ml 14000RPM Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 1,000.00 (ex. VAT) 1 in stock

PTI F10S-6x500 10,000RPM Rotor Lab

ITEM-45557

PTI F10S-6x500 10,000RPM Rotor Lab

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in good cosmetic condition but has not been tested further.

Specifications:

Rotor Speed: 10,000 RPM
Capacity: 6 x 500 ml test tube holders
Serial No.: 60628

£ 1,000.00 (ex. VAT) 1 in stock

Beckman Coulter Bench-top Optima TLX Ultracentrifuge Lab

ITEM-37453

Beckman Coulter Bench-top Optima TLX Ultracentrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. The door locking vacuum and temperature features work, but it does not spin. We tested it with a TL series rotor (not included).

It is in good cosmetic condition, with marks from age & use.

£ 990.00 (ex. VAT) 1 in stock

Piramoon Technologies F15-6x100 FiberLite 15,000rpm 24,700g Centrifuge Rotor Lab

ITEM-35716

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor

This was removed from a university lab where it was surplus to requirements.

The item is in very good cosmetic condition and also includes its original carry case.

Items features are as follows:

15000rpm

24,700 X G

6x 100ml tube holders

Quick release autolock

£ 900.00 (ex. VAT) 1 in stock

Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor

ITEM-35614

Beckman JS 4.2 Series 4200RPM Swinging Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

Maximum capacity- 6x1000ml

Max RPM- 4200

Includes:

X18 Beckman 4x50ml tube slots (345371)

X14 Beckman 14x15ml tube slots (339180)

X3 1000ml buckets 1066g (368575)

X3 1000ml buckets 1067g (368575)

Model number- JS-4.2

Serial number- 07U2791

£ 805.00 (ex. VAT) 1 in stock

ALC Multispeed Refrigerated Centrifuge PK 121 R + T515 4300rpm Rotor Lab

ITEM-16480

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was surplus to requirements.

The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works.

The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37.

The Rotor number displayed T515.

The Buckets Serial number is 0306/01.

The buckets Cat Number is 11210335.

The number on the bottom of the buckets is Ch. 007027 S.303.

The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435.

The ALC 2035 Adapter is for 50ml tubes.

SPARES/REPAIR ITEM

£ 800.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Discovery M120 SE Centrifuge Spares/Repairs

ITEM-35813

This was removed from a university lab where it was surplus to requirements

THe unit powers up but shows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal.

It is sold for spares/repairs.

No rotor included.

£ 800.00 (ex. VAT) 1 in stock

Beckman Coulter Centrifuge Rotor Type 50.2 Ti Lab

ITEM-41839

Beckman Coulter Rotor Type 50.2 Ti

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

Features:

Type - 50.2 Ti
Max RPM - 50,000
The Unit Has 12 x Slots For Vials
Only Use in Instruments Classified H, R, S

£ 800.00 (ex. VAT) 1 in stock

Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab

ITEM-37244

Beckman GS-6KR Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.

Includes:-

Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
4 x Buckets, the cover for one of the baskets is not included.

£ 760.00 (ex. VAT) 1 in stock

Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab

ITEM-36950

Heraeus Labofuge 400 Function Line Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 3500rpm.

It is in reasonable cosmetic condition with light marks and rusting.

Heraeus Rotor #8179

4 x Buckets #8172 Ch.003515

£ 750.00 (ex. VAT) 1 in stock

Eppendorf Model A-2-DWP Rotor 3,700 rpm 2 x Buckets Lab

ITEM-46921

Eppendorf A-2-DWP Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was unable to be tested further.

Includes:

2 x Swinging Buckets

Specifications:

Maximum speed: 3,700 rpm
Maximum RCF: 2,250 × g
Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Beckman Optima LE-80K Centrifuge Spares/Repair Lab

ITEM-46445

Beckman Optima LE-80K Centrifuge Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but encounters issues when attempting to reach set speeds; the machine beeps and displays messages about microns and speed, then slows down.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Sorvall RC-5C+ Plus Floorstanding Centrifuge Lab Spares/Repairs

ITEM-41038

This Sorvall RC-5C Plus Floor-Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up, but shortly after running it produces error code 7 preventing it from being tested, therefore this item is sold as Spares or Repairs.

Error 7 = REFRIGERATION SYSTEM FAILURE There was no apparent drop in chamber temperature thirty seconds after the refrigeration system started to cool. Notify your Thermo Field Service Engineer.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-40061

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs well to 6000rpm. It also cools and incubates as it should.

It is in good cosmetic condition with minor marks.

It is supplied with;

MSE Rotor 43124-141

SN - 7962

Max RPM - 6000

4 x Buckets

4 x Beige Adaptors hold 1 x 50ml tube each

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

ITEM-37249

Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810

This item was removed from a university where it was surplus to requirement.

It is in good, used cosmetic condition.

Specifications:

Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
Angle: 45° Fixed, 12 to 87° Swinging Bucket
Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 740.00 (ex. VAT) 1 in stock

Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid

ITEM-37954

This Sorvall Dupont Super-Lite GS-3 Model SLA-3000 Fixed Angle Rotor With Lid was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used.

1200 rpm max

6 x position 500ml capacity

Compatible with Thermo Scientific Sorvall Evolution RC Series and RC-6 Series centrifuges including RC-5, RC-5B, RC-5B Plus, RC-5C Plus, and RC-26

RECERTIFIED ITEM

£ 730.00 (ex. VAT) 1 in stock

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor Lab

ITEM-26173

Durafuge 100 Precision Centrifuge Cat no. 51231201 with SO-1X Rotor

This was removed from a university lab where it was surplus to requirements.

It has been tested by a service engineer and is in full working order. It is in very good cosmetic condition with only minor marks from use. A brand new gas strut was fitted by the engineer.

Rotor - Precision SO-1X

Cat no. 51231203

4 x Swinging buckets - SO-1X

Cat no. 51231221

SN - 1302/01

4 x Adaptors to fit 15ml tubes

Cat no. 51231208

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

£ 700.00 (ex. VAT) 1 in stock

BECKMAN Model J2-21 Floor Standing Centrifuge Lab

ITEM-21249

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in full working order but is not supplied with a rotor.

It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

£ 680.00 (ex. VAT) 1 in stock

Jouan BR3.11 Refrigerated Benchtop Centrifuge Lab

ITEM-29891

This Jouan BR3.11 Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order, but the lid has to be opened manually. The automatic switch is broken

It is in good cosmetic condition with minor marks.

Rotor Arm:

Max Load 2.8kg

Max RPM 5150

Buckets x 2:

Dimensions L5.5cm x W5.5cm x H9.5cm

Rotor:

Part No. 803

6 Hole

Dimensions L2cm x W2cm x H4cm

£ 650.00 (ex. VAT) 1 in stock

Eppendorf A-4-44 Rotor 5000rpm 2x 50ml Lab

ITEM-46919

Eppendorf A-4-44 Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It has a maximum RPM of 5000. It was unable to be tested further.

Includes:

4x Swinging buckets
2x 50ml test tube holders in each bucket

Model: A-4-44

£ 600.00 (ex. VAT) 3 in stock

2 x Beckman Coulter Mo. JLA-10.500 Biosafety Liquid Centrifuge Canister Lab

ITEM-45560

Beckman Coulter JLA-10.500 Biosafety Liquid Centrifuge Canisters (Set of 2)

This item was removed from a university laboratory where it was surplus to requirements.

Both canisters are in good cosmetic condition and rated for a maximum speed of 1000 RPM.

Specifications:

Quantity: 2 Canisters
Max RPM: 1000

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sorvall Legend RT Centrifuge w/ 4600rpm Swinging Arm Rotor Lab Spares/Repairs

ITEM-36501

Sorvall Legend RT Centrifuge

This system was removed from a university lab where it was surplus to requirements.

The unit powers on, but it shows Error 21 when attempting to spin, causing the unit to cut out. The refrigeration system functions well, and the unit is in good cosmetic condition with minor marks.

Due to the error, this item is listed as Spares/Repair.

The unit is fitted with the following rotor:

Sorvall Rotor
P/N: 75006445
S/N: 004061

Includes:

4 x Sorvall Swinging Buckets
P/N: 75015679

£ 600.00 (ex. VAT) 1 in stock

Sorvall TH-641 Swinging Bucket Rotor 41,000 Max RPM with 4 x Buckets Lab

ITEM-41836

Sorvall TH-641 Swinging Bucket Rotor 41,000 Max RPM with 4 x Buckets Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

This item features 4 Sorvall buckets, therefore it is missing 2 of the required buckets.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge Lab Spares/Repairs

ITEM-29745

Beckman Coulter Avanti J-E Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has several faults. The unit requires a new board, flash card and cooling system.

It is in good cosmeti condition with minor marks.

It is sold for spares/repairs.

£ POA 1 in stock

Eppendorf 5402 Refrigerated Centrifuge w/ Eppendorf F-45-18-11 Rotor Lab

ITEM-46193

This item is new in stock. Please enquire for further details.

£ 500.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP 3,700 rpm Rotor

ITEM-46920

Eppendorf A-2-DWP Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was unable to be tested further.

Specifications:

Maximum speed: 3,700 rpm
Maximum RCF: 2,250 × g
Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5810R BenchTop Centrifuge Spares/Repair Lab

ITEM-46918

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Additional, although it received a good report in a recent centrifuge service, the client noted that with frequent use the unit overheats and displays error messages related to overloading.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Optima L-60 Floor Standing Centrifuge Lab Spares/Repairs

ITEM-42198

Beckman Optima L-60 Floor Standing Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition.

However, the display is not functioning correctly, showing only two dots in the TIME-HR-MIN and one dot in TEMP-°C.

Due to these issues, it is listed as Spares/Repair.

There is no rotor included.

Specifications:

Speed: 1,000 - 60,000 rpm
Temperature: 0°C - 40°C

Model: Optima L-60 Serial No.: L1M602

Rotational Counter: 417,132 x 10,000 rotations

£ 500.00 (ex. VAT) 1 in stock

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

ITEM-46200

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

Jouan S40 Swing-Out Rotor w/ 4 x Buckets & Inserts.
Max Load: 2kg
Max RPM: 4300

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heto Maxi Dry Plus VR Maxi Vacuum Centrifuge Lab Spares/Repairs

ITEM-46058

Heto Maxi Dry Plus VR Maxi Vacuum Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonable condition and powers on, however there's a fault with the lock mechanism that prevents the lid from opening.

Therefore, further testing could not be conducted and it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Spares/Repairs

ITEM-36885

GeneVac Technologies HT-4 Series 2 Centrifugal Evaporator Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonable, used cosmetic condition.

The centrifuge was tested at a high spin rate and achieved approximately 1650rpm. Temperature control tests were performed; the system failed to reach the set temperatures of -20˚C and 37˚C, only stabilizing around 20˚C.

Due to the temperature faults experienced during testing, this item is listed as Spares/Repair.

Includes:

Cart/stand: Dimensions L78 x W70 x H73 cm
4 x swinging buckets
2 x adaptors for 12 x 15ml tubes each
2 x adaptors for 50 x 0.5ml tubes each
2 x adaptors for 32 x 1.5ml tubes each (PN-10-5043)

Specifications.

Model: HT4 Series 2
Serial No.: 5794

This system does not include a vacuum pump.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Refrigerated Centrifuge 5804 R Lab Spares/Repairs

ITEM-41484

Eppendorf Refrigerated Centrifuge 5804 R Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore we are unable to test it further, and it is listed as Spares/Repair.

The control board is faulty, and is loose inside the chamber.

There is no rotor.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge Lab Spares/Repairs

ITEM-45431

Eppendorf 5804 R Centrifuge Lab

This item was removed from a university where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. However, it displays "Error 14," indicating an electrical fault, and also has a faulty lid locking mechanism.

Due to both errors listed above, this item is listed as Spares/Repair.

Specifications:

Model: 5804 R
Serial No.: 5805CI964308

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Biofuge 22R Centrifuge Lab Spares/Repairs

ITEM-35675

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Benchtop Centrifuge w/ S40 Rotor Lab

ITEM-45413

Jouan B4i Benchtop Centrifuge with S40 Rotor

This item was removed from a university where it was surplus to requirements.

The centrifuge was successfully run for 60 minutes at 4,000rpm, the maximum speed recommended for a swing-out rotor on this unit.

It is in fair cosmetic condition, showing signs of general use.

Includes:

S40 Swinging bucket rotor with 4 buckets
4 additional buckets
12 x bucket inserts

Specifications:

Model: B4i
Serial No.: 30202056
Maximum RPM: 14,000 (unit); 4,300 (rotor)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair

ITEM-26006

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up but shows error 21 - wiring fault.

It is sold for spares/repairs.

A 4600rpm rotor is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 3000i Benchtop Centrifuge Lab Spares/Repairs

ITEM-37436

MSE Mistral 3000i Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature.

Additionally included:

1 x MSE Rotor

Model BS4402

7 x Swinging Buckets:

Volume: 250ml

Bucket Adaptors:

6 x Blue

Holds: 12x 5ml Vials

7 x Grey

Holds: 4 x 12ml Vials

8 x MSE Brown

Holds: 1 x 100ml VIals

1 x Hex Key Locking Bar

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

ITEM-41652

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted.

Therefore, this item is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan CR 412 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-37144

Jouan CR 412 Centrifuge

This unit was removed from a university where it was surplus to requirement.

This item is in reasonably good cosmetic condition.

It powers on, but the button functions are unresponsive to the unit, therefore unable to conduct any testing.

The lid opened with manual emergency release.

It is sold as Spares/Repairs.

Includes the following:

2x Swinging Buckets:

Part no: 11174154

Volume: 450ml

Bucket Vial Adaptor Inserts:

1x set 7x 50ml vials - RED

1x set of 7x 15ml / 16x 6ml vials - BROWN

Centrifugation

Filters