Centrifugation

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Biofuge Primo Centrifuge w/ Thermo 7591 Rotor Lab

ITEM-42457

Thermo Scientific Heraeus Biofuge Primo Centrifuge w/ Thermo 7591 Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and operates smoothly, having completed only 684 cycles.

The unit is in very good cosmetic and in working order

Includes:

Thermo 7591 swing rotor with 4 x 100ml buckets
Maximum speed: 4000 rpm
Rotor order No.: 75007591
Thermo 7555 buckets, 100ml, with a maximum load of 200g

Specifications;

Model: Heraeus Biofuge Primo
Serial No.: 41032309 Year: 2009

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan BR 3.11 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39146

Jouan BR 3.11 Refrigerated Centrifuge Lab

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers up.

Despite being in reasonably good cosmetic condition, this item is to be sold as Spares or Repairs due to its inability to maintain the set temperature and keep the lid open.

Included:

Jouan B 3.11 Centrifuge G=420 g, 4000 RPM Rotor & 11174179 Buckets

Beckman Coulter SW32Ti Swinging Bucket Rotor

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Refrigerated Centrifuge Spares/Repairs Lab

ITEM-37628

Beckman L7-65 Refrigerated Centrifuge L7-65R

This was removed from a university lab where it was surplus to requirements.

The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds.

For this reason it is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Instruments Labofuge 400R Function Line Lab Spares/Repairs

ITEM-41702

Heraeus Instruments Labofuge 400R Function Line Lab

This item was removed from a university where it was surplus to requirement.

It is in fairly poor cosmetic condition and powers on, however, due to an issue with the cooling/heating element it did not reach any desired temperature when tested.

Therefore, it is listed as Spares/Repair.

Additionally, it was tested to its maximum speed of 4500RPM, which performed well with no issues.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L8-80MW Ultracentrifuge Lab

ITEM-44394

Beckman L8-80 Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.

Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal.

Due to the above faults, this item is listed as Spares/Repair.

The 3-phase plug has been removed and there is no rotor included in the sale.

Also included:

1 x Operation Key

1 x Original User Manual

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

ITEM-37273

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

This item was removed from a university laboratory where it was surplus to requirements.

The Savant SPD1010 SpeedVac powers on but encounters issues during operation. The lid fails to lock when a program is initiated, and although the rotor slightly moves, it does not fully run.

The AC-1 Phase motor operates correctly when tested independently but does not power on when connected to the SpeedVac.

Due to these issues, this unit is listed for spares or repair.

Model: SPD1010

£ 450.00 (ex. VAT) 1 in stock

Beckman Coulter Type 50.4 50,000 RPM Centrifuge Rotor Lab

ITEM-28197

This Beckman Coulter Type 50.4 50,000 RPM Centrifuge Rotor was removed from a university lab where it was surplus to requirements.

Holds 44 x 15ml tubes

The item is in good, used cosmetic condition but has not been tested. It will need to be inspected fro safety by a qualified engineer before it can be used again.

£ 450.00 (ex. VAT) 1 in stock

Thermo Shandon Cytospin 4 Cytocentrifuge Lab

ITEM-20283

This Thermo Shandon Cytospin 4 Cytocentrifuge was removed from a university lab where it was surplus to requirements.

The unit has been inspected by a service engineer who fitted new plastic hinges fitted. The repair isn't perfect, but it's functional

It also appears to have a battery error. There is a battery soldered to the main board, it probably needs replacing. The unit shows an error 4 code when first switched on but if you press stop the code goes away, and the unit starts up normally.

The error relates to a discharged battery.

The unit is in otherwise full working condition and is in good cosmetic condition with just the marks from the repairs.

£ 435.00 (ex. VAT) 1 in stock

Sigma 3 K 18 Refrigerated Laboratory Centrifuge Lab

ITEM-29721

This Sigma 3K18 Refrigerated Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and is in working order. There is no rotor, but we tested it without on a low speed.

It is in reasonably good cosmetic condition with minor marks from use.

£ 375.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm Lab

ITEM-36319

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm

These were removed from a university lab where they were surplus to requirements.

4x Eppendorf Centrifuge Swing Buckets S-4x750

M/N: NL017

Date: 03/13

Max RPM: 4800

These are in good cosmetic condition on the outside, but are slightly corroded and pitted on the inside.

They have not been tested.

NEW ITEM

£ 375.00 (ex. VAT) 1 in stock

Thermo Scientific Sorvall Culture Flask Adapter 75008383 Lab

ITEM-35732

Thermo Scientific Sorvall Culture Flask Adapter 75008383

This was removed from a working lab where it was surplus to requirements.

The item is in brand new condition in its original packaging.

For processing Nunc™ T-75 or T-25 EasyFlasks™ in Thermo Scientific Sorvall Legend™ T/RT Centrifuges.

£ 350.00 (ex. VAT) 1 in stock

Jouan CR4-22 Benchtop Refrigerated Centrifuge Spares/Repairs

ITEM-45102

Jouan CR4-22 Benchtop Refrigerated Centrifuge With Swinging Bucket Rotor

This item was removed from a university lab where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. The rotor did not reach the maximum RPM of 4750, stalling at 4100 RPM.

It has been temperature tested. (Thermometer not included.)

Due to the inability of reaching its max RPM, this centrifuge is listed as Spares/Repair.

Includes:

Jouan bucket rotor
4 x 85220020 buckets
4 x swinging plates
4 x bucket inserts for 50ml tubes
4 x bucket inserts for 25ml tubes

£ 350.00 (ex. VAT) 1 in stock

MSE 43124-141 4 x 200ml Swing-Out Rotor for Harrier 18/80R

ITEM-45361

MSE 4 x 200ml Swing-Out Rotor for Harrier 18/80R

This item was removed from a university laboratory where it was surplus to requirements.

The rotor is in good cosmetic condition and includes 4 x 200ml buckets.

Specifications.

Maximum Speed: 6000 RPM.
Model: 43124-141
Serial No.: B012R 9070

£ 350.00 (ex. VAT) 1 in stock

Jouan S20 Swing-Out Laboratory Centrifuge Rotor 4100 RPM Lab

ITEM-46199

Jouan S20 Swing-Out Laboratory Centrifuge Rotor 4100 RPM Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

Specifications;

Max load 1.4kg
Max rpm 4100
Includes 2 x plate-buckets

£ 350.00 (ex. VAT) 1 in stock

Beckman J2-21 Floor Standing Centrifuge with JA10 10000rpm Rotor Lab

ITEM-32037

Beckman J2-21 Floor Standing Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with only minor marks from use.

Included are;

Beckman J2 - 21 Centrifuge

Cat no. 341737

SN - E948

Rotor Type - JA 10

SN - 17342

10,000rpm Max

Hold 6 x Buckets 7cm diameter

£ 340.00 (ex. VAT) 1 in stock

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab

ITEM-35400

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. No buckets are supplied.

Maximum RPM: 5650.

Maximum Load: 2 x 500g.

£ 315.00 (ex. VAT) 1 in stock

BECKMAN JA-20 Fixed Angle Rotor Lab

ITEM-41409

BECKMAN JA-20 Fixed Angle Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has not been tested.

Specifications:

Type: JA-20
Serial Number: E.21076
Maximum RPM: 20,000
Capacity: Holds 8 x 50ml tubes
Included: Manual

£ 300.00 (ex. VAT) 1 in stock

MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab

ITEM-36610

MSE Falcon 6/300 Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.

This item also includes the following:

1 x Mistral MSE Rotor - 43124

Capacity: 4 x 750ml
SN: 986766
Max RPM: 2500
(There are no rotor buckets included)

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge 13 Centrifuge Lab

ITEM-37826

This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.

We are unable to test this item further at our facility.

18 sample holders.

£ 300.00 (ex. VAT) 1 in stock

Beckman JA-20 20,000 RPM Centrifuge Rotor Lab

ITEM-26437

This Beckman JA-20 20,000 RPM Centrifuge Rotor was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition but does have marks from use.

It has not been tested and will need to be inspected for safety by a qualified technician before it can be used again.

It fits 20ml sample tubes.

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge Haemo Centrifuge with 1067 Haematocrit Dish Rotor Lab

ITEM-25993

This Haraeus Biofuge Haemo Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use. It is in full working order, running up to 13000rpm.

It is fitted with a plate rotor.

RECERTIFIED ITEM

£ 250.00 (ex. VAT) 1 in stock

Sigma 1-15K Refrigerated Benchtop Centrifuge Lab

ITEM-30220

This Sigma 1-15K Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit has been recertified by a service engineer. It is in full working order. It has had a new gas strut fitted, but the lid can get stuck. Once it is opened it will repeatedly open, but when left for an amount of time it can get stuck again.

It is in excellent cosmetic condition with some minor marks from use.

£ 250.00 (ex. VAT) 1 in stock

6 x ALC Centrifuge Buckets For Rotor Lab

ITEM-45417

6 x ALC Centrifuge Buckets For Rotor Lab

This item was removed from a university where it was surplus to requirements.

The buckets are in fair cosmetic condition and consist of the following:

2 x ALC R2017 buckets designed to hold 7 x 15ml tubes
2 x ALC R2012 buckets designed to hold 5 x 25ml tubes
2 x ALC buckets designed to hold 2 x 50ml tubes

£ 250.00 (ex. VAT) 1 in stock

Heraeus HFA 15.2 Rotor For Centrifuge Lab

ITEM-41488

Heraeus HFA 15.2 Rotor For Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition but has not been tested.

Model: HFA 15.2
Holds: 18 x 2 ml tubes

£ 250.00 (ex. VAT) 1 in stock

Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab

ITEM-30455

This Sanyo MSE Harrier 18/80 Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with marks from use.

It is in full working order. The rotor spins up to 6000rpm and the refrigeration works and has been tested at 4˚C and -9˚C.

MSE Rotor 43124-141

Max RPM - 6000

4 x Buckets

4 x Yellow Adaptors hold 1 x 50ml tube each

£ 250.00 (ex. VAT) 1 in stock

Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge with 4500rpm Rotor Lab

ITEM-30547

This Sanyo MSE Mistral 2000R Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in working order. The RPM could be set up to 6500 but the rotor would only run up to 4500rpm.

It was tested with a digital thermometer (not included).

When the temperature was set to 4˚c, the thermometer read 5˚c

When the temperature was set to -4˚c (minimum) the thermometer read -5˚c

There is a Rotor inside with 4 x Buckets and 2 x Yellow 50ml Adaptors.

It is in reasonably good cosmetic condition but has some minor marks from use.

£ 230.00 (ex. VAT) 1 in stock

Hettich E1547 Lab Centrifuge Rotor 48 x 3g, 1136, 13000 RPM

ITEM-09570

This rotor was removed from a lab during a clearout.

We have not tested the rotor so it will need to be checked and tested prior to use in your centrifuge.

£ 200.00 (ex. VAT) 1 in stock

Sorvall GSA 6x250mL Fixed Angle Centrifuge Rotor 13,000 RPM Lab

ITEM-39151

This Sorvall GSA 6x250mL Fixed Angle Centrifuge Rotor 13,000 RPM was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used.

Capacity: 6 x 250mL