Lab Incubators

£ 280.00 (ex. VAT) 1 in stock

Heraeus HeraCell 240 CO2 Laboratory Incubator Lab

ITEM-24395

This Heraeus Hera Cell 240 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers on and was charged with CO2 to 5% and tested with a digital thermometer (not included).

The temperature was set to 37˚c which it reached after running for an hour. (the thermometer read 41˚c)

It was then set to the maximum of 55˚c and it reached about an hour or so later (the thermometer read 59˚c).

It is in reasonable, used cosmetic condition with marks from use.

Inside dimensions - D56 W61 H67 CM

2 Shelves - 50 x 56cm

£ 235.00 (ex. VAT) 1 in stock

Thermo Electron Heraeus Function Line Type B 12 Incubator Lab

ITEM-35091

This Thermo Electron Heraeus Function Line Type B 12 Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition with minor marks from use

2 Shelves - 50 x 35cm

£ 230.00 (ex. VAT) 1 in stock

LMS Cooled Refrigerated Laboratory Incubator Model - 305 Lab

ITEM-26190

This LMS Cooled Laboratory Incubator Model - 305 was removed from a university lab where it was surplus to requirements.

The unit powers up and was tested with a digital thermometer (not included).

It is in reasonably good cosmetic condition with some marks from use.

It was cooled down to 4˚C which it reached after about 15 minutes. it was then set to -10˚C. It reached -9˚C after a couple of hours.

It was then set to 37˚C which it reached in 10 minutes and then 50˚C which it reached in a further 10 minutes.

Inside dimensions - D20-28 W44 H53cm

Upper shelf - 27 x 43cm

Lower shelf - 13 x 4cm

£ 210.00 (ex. VAT) 1 in stock

Heto Holten CO2 Incubator Model - CellHouse 170 - 001 Lab

ITEM-23284

This Heto Holten CO2 Incubator Model - CellHouse 170 - 001 was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). The incubator has been charged with 5% CO2 and everything appears to be working well.

When set to 37˚C the display showed 37˚C and the thermometer measured 37.9˚C.

When set to the max of 50˚C the display showed 49.5˚C and the thermometer measured 51˚C.

It is in good cosmetic condition with some marks from use.

Inside dimensions - D55.5 W50 H56cm

3 Shelves 52 x 49cm

1 Tray 49 x 36 x 4cm

£ 205.00 (ex. VAT) 1 in stock

Heraeus B 6030 Benchtop Laboratory Incubator Lab

ITEM-24746

This Heraeus B 6030 Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition There are some light tape markings and a scratch on the LHS of the unit from general use.

The digital LCD screen is slightly faulty but we were still able to read it well enough.

Interior dimensions:

W36cmx H20cm x D36cm

The unit was tested with a digital thermometer (not included).

Set temp at 37ºC our thermometer read 38.9ºC

Set temp at 55ºC our thermometer read 56.5ºC

Set temp at 70ºC our thermometer read 71.3ºC

£ 200.00 (ex. VAT) 1 in stock

Sanyo Laboratory Incubator MCO-17AI CO2 Lab

ITEM-30546

This Sanyo Laboratory Incubator MCO-17AI CO2 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order. It has had a brand new sample pump fitted. The report is available on request. It will require calibration upon installation.

It is in good cosmetic condition with minor marks from use.

4 x Shelves 45 x 45cm

£ 185.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator Model - MCO-17AI Lab

ITEM-27470

This Sanyo CO2 Laboratory Incubator Model - MCO-17AI was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with 5% CO2 and measured with a digital thermometer (not included).

It was set to 37˚C which it reached in 2 hours. It was then set to 50˚C which took a further hour to reach.

The digital thermometer was consistent with the readings on the display.

The plastic door handle has snapped but that doesn't seem to affect the operation of the unit at all.

Internal dims - D49.5 W49 H65cm

2 Shelves - 45 x 45cm

RECERTIFIED ITEM

£ 185.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator MCO-19AIC (UVH) Lab

ITEM-31242

This Sanyo CO2 Laboratory Incubator MCO-19AIC (UVH) was removed from a university alb where it was surplus to requirements.

The unit has been professionally serviced and is in good working order. It will require calibration on installation.

It is in good cosmetic condition with minor marks from use.

Internal dimensions - D51 W48 H66cm

4 Shelves - 45 x 45cm

£ 175.00 (ex. VAT) 1 in stock

Heraeus Benchtop Laboratory Incubator Type - B 5060 EK-CO2 Lab

ITEM-28140

This Heraeus Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit has been tested with a digital thermometer (not included) at 5% CO2.

The temperature was first set to 37°c, it took around two hours to reach.

The temperature was then set to its max of 50°c but it only reached as high as 43.7˚c on the thermometer after running for nearly 6 hours.

Our external CO2 Gauge only registered 3.8% CO2 while it was running.

Internal dimensions - D57 W60 H60.5cm

6 x Shelves - 51 x 27cm

£ 165.00 (ex. VAT) 1 in stock

B&T Unitemp Benchtop Laboratory Incubator Lab

ITEM-24675

The unit powers on and is in good cosmetic condition. The unit does have tape marks and surface stains around it from general use. The rubber seal on the door is quite dirty and stained from general use.

The unit was tested with a digital thermometer (not included).

When set to 37ºC our thermometer read 29.8ºC

When set to 65ºC our thermometer read 46.6ºC

When set to 100ºC our thermometer read 79.3ºC

The unit was powered on for most of a morning to reach these temperatures.

Interior dimensions:

H36cm x W38cm x D32cm

RECERTIFIED ITEM

£ 150.00 (ex. VAT) 1 in stock

RS Biotech Galaxy S+ 170-200 Plus CO2 Laboratory Incubator Lab

ITEM-35093

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.

It is in good cosmetic condition with minor marks from use.

3 Shelves - 52 x 42.5cm

£ 135.00 (ex. VAT) 1 in stock

Heraeus BBK 6220 CO2 Laboratory Incubator Lab Spares/Repairs Faulty CO2

ITEM-35468

Heraeus BBK 6220 CO2 Laboratory Incubator Lab Spares/Repairs

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the incubation works, but the CO2 control is faulty.

It is in good cosmetic condition with marks from use.

it is sold for spares/repairs.

£ 110.00 (ex. VAT) 1 in stock

LEEC Compact Laboratory Incubator Model - K2N Lab

ITEM-25618

This LEEC Compact Laboratory Incubator Model - K2N was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer. When the dial was set to just under 40˚C it reached 32. When turned to max it reached 48˚C. It is missing the glass door which might be why it is not reaching the temperature.

We recommend replacing the glass-door.

Inside dimensions - D41 W55 H84cm

4 Shelves - 42 x 53cm

£ 100.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab

ITEM-26181

This RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with 5% CO2 and a digital thermometer (not included).

When set to 37˚C the display showed 36.9˚C and the thermometer measured 37.4˚C. It took about 3 hours.

When set to 50˚C (max) the display showed 49.8˚C and the thermometer measured 50.6˚C. It took about 6 hours to get there.

The CO2 level climbed from it's setting of 5% up to 7%.

It is in reasonably good cosmetic condition but has marks from use.

Inside dimensions - D56 W52 H56cm

1 Shelf - 52 x 48cm

1 Tray - 35 x 48.5 x 4cm

£ 70.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus BB15 CO2 Laboratory Incubator Lab

ITEM-30240

This Thermo Scientific Heraeus BB15 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The item powers on and is in reasonably good used cosmetic condition. The interior is a bit corroded/coated. It was tested with a digital thermometer (not included) as well as a CO2 Sensor (not included).

When the temperature was set to 37˚c, the thermometer read 37.9˚c

When the temperature was set to 55˚c (max) the thermometer read 56.6˚c

The CO2 was set to 5.0% and held when calibrated, reading 5.1% on our sensor

Internal dimensions - D51 W47 H60cm

3 Shelves - 47 x 43cm