Lab Incubators
Items 81 to 100 of 142
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 485.00 (ex. VAT) 1 in stock
RS Biotech Galaxy S+ CO2 Laboratory Incubator 170-200 Plus Lab
ITEM-35168
This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was surplus to requirements.
The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation.
It is in good cosmetic condition with minor marks from use.
3 Shelves - 52 x 42.5cm
£ POA 1 in stock
Sanyo MCO-17A CO2 Laboratory Incubator Lab
ITEM-21193
This item is new in stock. Please enquire for further details.
£ 460.00 (ex. VAT) 1 in stock
Thermo Scientific Heraeus Instruments Function Line Incubator Type B 6
ITEM-38893
Thermo Scientific Heraeus Instruments Function Line Incubator Type B 6
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digital thermometer not included).
It is in good cosmetic condition with minor marks from use.
2 Shelves - 35 x 35cm
£ 430.00 (ex. VAT) 1 in stock
Panasonic MIR-554-PE Cooled Incubator Lab Spares/Repairs
ITEM-20210
This Panasonic MIR-554-PE Cooled Incubator was removed from a university lab where it was surplus to requirements.
The unit powers and incubates well, but has a faulty cooling system.
It is in otherwise good cosmetic condition with minor marks.
It is sold for spares/repairs
Interior dimensions:
D52cm x W64cm x H127cm
£ 420.00 (ex. VAT) 1 in stock
Genlab LCI/9V/DIG Lab Incubator
ITEM-38915
Genlab LCI/9V/DIG Lab Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digital thermometer not included).
It is in good cosmetic condition with minor marks.
6 Shelves 50 x 50cm
£ 410.00 (ex. VAT) 1 in stock
Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI Lab
ITEM-24501
Sanyo Laboratory CO2 Incubator Stack Models - MCO-17AIC / MCO-17AI
These were removed from a university lab where they were surplus to requirements.
The units power up and are in good working order. They were tested with a digital thermometer (not included).
They are in good cosmetic condition with minor marks from use.
1x Sanyo CO2 Incubator:
Model - MCO-17AI
SN - 90705826
Inside dimensions - D51 W49 H66.5cm
3 Shelves 46 x 46cm
1 Tray 46.5 x 36.5 x 4cm
1x Sanyo CO2 Incubator:
Model - MCO-17AIC
SN - 10100758
Inside dimensions - D51 W49 H66.5cm
2 Shelves 46 x 46cm
1 Tray 41 x 31 x 5cm
£ 400.00 (ex. VAT) 1 in stock
Torrey Pines Echotherm Scientific Chilling Laboratory Incubator IN30-2 Lab
ITEM-31061
Torrey Pines Scientific Chilling Laboratory Incubator Model - IN30-2
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.
Internal Dimensions - D25.5 W36 H30.5cm
2 Shelves - 23.5 x 35cm
It is in good cosmetic condition with minor marks from use.
£ 400.00 (ex. VAT) 1 in stock
WTW TS606/2-i Compact Thermostatic Cabinet Lab Incubator
ITEM-31865
This WTW TS606/2-i Compact Thermostatic Cabinet was removed from a university lab where it was surplus to requirements.
4x Schuko internal sockets.
Volume: 180 litres
1x Instruction Manual.
£ 390.00 (ex. VAT) 1 in stock
Binder KB 115 Cooling Laboratory Incubator Lab
ITEM-32033
Binder KB 115 Cooling Laboratory Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). it is in full working order.
It is in good cosmetic condition with minor marks from use.
£ 380.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator Model - MCO-18AIC Lab
ITEM-26275
This Sanyo CO2 Laboratory Incubator Model - MCO-18AIC was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included).
It is in reasonably good cosmetic condition with some marks from use.
The temperature was set to 37˚c and charged with 5% CO2 - The CO2 Kicked in when the temperature reached 37˚c. When at 37˚c, the thermometer read 39˚c.
The temperature was then set to its maximum of 50˚c which it reached about an hour or so later. The thermometer read 52°c.
External dimensions - D72 W64 H91cm
Internal - D51 W50 H66cm
3 Shelves - 45 x 45cm
1 Tray - 35 x 32cm
£ 375.00 (ex. VAT) 1 in stock
Gallenkamp Digital Cooled Refrigerated Incubator Model: ICI180.WT2.C Lab
ITEM-29658
Gallenkamp Digital Cooled Refrigerated Incubator Model: ICI180.WT2.C
This was removed from a university lab where it was surplus to requirements.
The item is in good used condition but no keys are supplied.
The item has 3 x shelves & 6 x internal lights.
The unit powers up and is in working order. It may require some degree of calibration when installed.
£ 335.00 (ex. VAT) 1 in stock
Labnet Vortemp 56 Microplate Shaking Incubator Lab
ITEM-24398
This Labnet Vortemp 56 Microplate Shaking Incubator was removed from a university lab where it was surplus to requirements.
The item powers on and runs up to 120rpm.
It was tested with a digital thermometer (not included).
When the temperature was set to 37˚c, the thermometer read 35˚c.
When the temperature was set to 99.5˚c, the thermometer read 94˚c.
Both temperatures were reached relatively quickly.
It holds 56 x 2.0ml tubes.
The item is in reasonably good used cosmetic condition with marks and scratches.
£ 330.00 (ex. VAT) 1 in stock
LMS Cooled Laboratory Incubator Model: 305 Lab
ITEM-22066
This LMS Cooled Laboratory Incubator Model: 305 was removed from a university lab where it was surplus to requirements.
The item is in reasonable cosmetic condition but the door has rust marks and scratches. The exterior also has scratches and dents. The red light is loose and not secured and there is some mould along the seal.
We had a note from the lab saying there was an issue when setting the temperature. Setting it to refrigerate was a little temperamental but it does work.
Internal dimensions:
36cm D x 46cm W x 54cm H
It was tested with a digital thermometer (not included)
When set to -10˚C, the display showed -6.1˚C and the thermometer measured -8.7˚C
When set to 37˚C, the display showed 37˚C and the thermometer measured 34.7˚C
When set to 50˚C, the display showed 50.2˚C and the thermometer measured 47.6˚C
When set to 4˚C, the display showed 7.3˚C and the thermometer measured 4˚C
£ 325.00 (ex. VAT) 1 in stock
LMS Cooled Benchtop Laboratory Incubator Lab
ITEM-30499
This LMS Cooled Benchtop Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included)
The dial was set to the minimum of 0 and it dropped as low as -6˚c after running for a few hours.
When the dial was set to maximum, the thermometer read 42.7°c after running for around 6 hours.
The item is in a reasonable, used cosmetic condition with some minor marks from use.
Internal dimensions - D33 W45 H53cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 320.00 (ex. VAT) 1 in stock
Heraeus Laboratory Incubator Typ B 5060 EK-C02 with Trolley Lab
ITEM-19411
This Heraeus Laboratory Incubator Typ B 5060 EK-C02 was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced. The report is available on request. The system is in full working order.
it is in reasonably good cosmetic condition but has plenty of surface scratches and scuffs. it comes with a trolley.
Unit dimensions - L76 x W90 x H79cm
Internal dimensions - D57 x W60 x H60cm
6 Shelves 51 x 27.5cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 320.00 (ex. VAT) 1 in stock
Baker ReCO2ver Plus Rapid Recovery Incubator Model - REC602-INT Lab
ITEM-31380
This Baker ReCO2ver Plus Rapid Recovery Incubator was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in full working order. It will require calibration upon installation. The full report is available on request.
It is in good cosmetic condition with minor marks from use.
Internal dimensions - L55.5 W50 H73.5cm
4 Shelves - 52 x 48cm
£ 315.00 (ex. VAT) 1 in stock
Tritech Research Digitherm Heating and Cooling Benchtop Incubator Lab
ITEM-24691
This Tritech Research Digitherm was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. The temperature and time are controlled by a Tritech DigiTherm box on top of the unit. There are 3 buttons - + and Menu all of which are responsive and guide you through the menu display.
It has been tested at 3, 18, 37 and 65˚C and holds temperature well on all settings. The digital thermometer from the photos is not included.
Symbol Power Supply:
Part No. 50-14001-004
Interior dimensions:
W29cmx H45cm x D42cm
£ 300.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator Model - MCO-17AIC Lab
ITEM-26276
This Sanyo CO2 Laboratory Incubator Model - MCO-17AIC was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with 5% CO2 and a digital thermometer (not included). It is in reasonably good cosmetic condition with some marks from use. The plastic handle has snapped off the front of the unit but it is purely cosmetic.
The temperature was set to 37˚c and charged with 5% CO2 - It reached 36.5˚c before it seemed to stop but the thermometer read 37.9˚c and the CO2 was steady at 5%.
The temperature was then set to its maximum of 50˚c and it reached after around 4 hours with the thermometer reading 52.5˚c.
External dimensions - D72 W64 H91cm
Internal - D51 W49 H65cm
3 Shelves - 45 x 45cm
£ 295.00 (ex. VAT) 1 in stock
Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E Lab Faulty CO2 Sensor
ITEM-20233
This Nuaire Co2 Air Jacketed Automatic Incubator NU 5510 E was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). The temperature sensor was replaced and seems to be working as it should. However, the unit appears to have a faulty CO2 sensor and will not regulate properly.
When set at 37ºC the display showed 37˚C and our thermometer read 37.7ºC
When set at 55ºC the display showed 58.4˚C and our thermometer read 55.5ºC
Unit dimensions L68cm x W65cmx H103cm
Interior dimensions:
H60cm x W50cm x D48cm
£ 295.00 (ex. VAT) 1 in stock
Baker ReCO2ver Plus Rapid Recovery Incubator Lab Spares/Repairs
ITEM-31379
Baker ReCO2ver Plus Rapid Recovery Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has a heating issue.
It is sold for spares/repairs.
Items 81 to 100 of 142