Our Incubators and Growth Chambers category provides a selection of high-quality, second-hand equipment designed for precise temperature, humidity, and environmental control in laboratory and research applications. Specializing in incubators and growth chambers for cell culture, microbiology, and plant studies, our range is ideal for laboratories and research facilities.


Equipment undergoes varying levels of testing, including temperature and CO2 performance assessments, ensuring reliable and consistent environmental conditions for your experimental needs.

Items 101 to 128 of 128

Image of Binder KB 240 Refrigerated Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder KB 240 Refrigerated Incubator Spares/Repair Lab

ITEM-42729

Binder KB 240 Refrigerated Incubator


This item was removed from a facility where it was surplus to requirement.


The unit powers on, and the screen is functional.


However, temperature settings could not be adjusted during testing, and the unit did not rise above ambient temperature when left running.


Therefore, it is listed as Spares/Repair.


Includes:

  • Four internal shelves

Image of Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

ITEM-42723

Thermo Scientific Function Line BB15 CO₂ Incubator


This item was removed from a university laboratory where it was surplus to requirements.


The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.


Due to the issues stated above, this item was listed as Spares/Repair.


Includes:

  • Three internal shelves

The door seal and inner door catch are in good condition.


In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

Image of LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

£ 500.00 (ex. VAT) 1 in stock

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

ITEM-42425


LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab


This item was removed from a university lab where it surplus to requirement.


It is good cosmetic condition and good working order.

Image of LEEC Research CO2 Incubator Model GA2000 Lab

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order (thermometer not included).


It is in reasonably good cosmetic condition.

Image of New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab


This item was removed from a university lab where it was surplus to requirements.


The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)


The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

Image of Sanyo C02 Incubator Model MC0-175 Lab

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order (thermometer & co2 analyser not included).


It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.


The door seal and latch are both in good cosmetic condition.


This item includes 4  x Shelves and a Humidity Pan.

Image of Sanyo MCO-175 CO2 Incubator Lab

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.


This item is fixed with castors.

Image of Nuaire Model NU-5510E Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.


Therefore, it is listed as Spares/Repair.

Image of Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber Lab Faulty

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber Lab Faulty

ITEM-37811

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber


This item was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition.


It was successfully temperature tested, however, during further testing it failed to retain humidity.


Therefore, it is listed as Spares/Repair.


It has been recently fitted with a new element.


Eurotherm 220 8E controllers for temperature and humidity

Two compartments of size 65cm x 49cm x 20cm (l x w x h)

Image of SLS Lab Pro INC8017 Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

SLS Lab Pro INC8017 Incubator Spares/Repair Lab

ITEM-46085

SLS Lab Pro INC8017 Incubator Lab


This item was removed from a university lab where it was surplus to requirement.


The incubator powers on but is in poor cosmetic condition, and emits loud noises at higher temperatures, leading to it being turned off for safety reasons.


There are structural issues as well. The wheels are broken, and the doors are misaligned, requiring them to be manually lifted to lock properly.


Due to the issues listed above, this incubator is listed as Spares/Repair.

Image of Nuaire NU-5510E Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5510E Incubator Lab Spares/Repairs

ITEM-46172

Nuaire NU-5510E Incubator Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.


Therefore, it is listed as Spares/Repair.

Image of Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab

ITEM-49280

Thermo Scientific MaxQ 5000 Shaking Incubator Spares/Repair Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition but does not power on. It requires a new motor control PCB.


Therefore, it is listed as Spares/Repair.

Image of Binder CB 150 Incubator - Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 Incubator - Spares/Repair Lab

ITEM-43005

Binder CB 150 Incubator Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and has been successfully temperature tested, however the CO2 system does not inject.


Therefore, it is listed as Spares/Repair.

Image of Sartorius Certomat BS-1 Double Stack Shaking Incubator Lab Spares/Repairs

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sartorius Certomat BS-1 Double Stack Shaking Incubator Lab Spares/Repairs

ITEM-45555

Sartorius Certomat BS-1 Double Stack Shaking Incubator


This item was removed from a university laboratory where it was surplus to requirements.


Both incubator units are in good used cosmetic condition and power on, but each has functional issues:

  • Top Unit: Heats up as expected but does not shake.
  • Bottom Unit: Powers up but displays an error message in German on startup and continuously loops the startup sequence.

Efforts to troubleshoot both units were unsuccessful, and therefore are sold as Spares/Repair.

Image of Thermo Scientific Cytomat 24 C-GR Spares/Repair Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C-GR Spares/Repair Lab

ITEM-40010

Thermo Scientific Cytomat 24 C-GR Lab


This item was removed from a university laboratory where it was surplus to requirements.


It is in good cosmetic condition and powers on, however, the unit has a Com port error when connected to Cytomat software.


The internal screen within the door (used for the stacker system) does not power on, and there appear to be faults affecting the stacker system overall.


As such, this item is listed as spares or repair.


Please note:  Software not included.

Image of New Brunswick Scientific G-25 Foor Standing Incubator Shaker Lab

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific G-25 Foor Standing Incubator Shaker Lab

ITEM-35604

New Brunswick Scientific G-25 Foor Standing Incubator Shaker


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included). It is in full working order.


It is in reasonable cosmetic condition but has seen some heavy use and has lots of marks and scuffs.


Shaker platform - 76 x 46cm

Image of Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2


This item was removed from a university lab where it was surplus to requirement.


It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.


Specifications;

  • Model: BB 6220 CUO2
  • SN: 94109551
  • Internal dimensions: D56 W65 H66cm
  • 6 Doors with 6 Shelves: 50 x 26cm

Image of GenLab Incubator Model INC60F Lab

£ 400.00 (ex. VAT) 1 in stock

GenLab Incubator Model INC60F Lab

ITEM-46081

GenLab Incubator Model INC60F Lab


This item was removed from a university lab where it was surplus to requirement.


The unit powers up and is in good working order.


It is in good cosmetic condition.

Image of Jouan EB115 EL TS SN Incubator Lab

£ 400.00 (ex. VAT) 1 in stock

Jouan EB115 EL TS SN Incubator Lab

ITEM-40921

Jouan EB115 EL TS SN Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a temperature probe (not included).


It is in good working order and cosmetic condition with minor surface damage present.

Image of Genlab Model SP/LCI/320/SS/DIG Lab Incubator

£ 400.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator


This was removed from a working lab where it was surplus to requirements.


The unit powers up and is in full working order. It is in good cosmetic condition with minor marks


6 Baskets/Drawers - 51 x 50 x 15cm

Image of LTE Scientific IP100-U Laboratory Incubator Lab

£ 350.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).



Image of RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

£ 350.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

ITEM-29748

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus


This was removed from a university lab where it was surplus to requirements.


The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).


It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.




Image of 2 x Roller Incubator Shelves For Wheaton 753684-D Incubator

£ 250.00 (ex. VAT) 1 in stock

2 x Roller Incubator Shelves For Wheaton 753684-D Incubator

ITEM-46152

2 x Roller Incubator Shelves For Wheaton 753684-D Incubator


These items were removed from a university lab where they were surplus to requirement.


Both shelves are in good cosmetic condition.


Image of Laboratory Thermal Equipment Incubator (Cream) Copper Lab

£ 200.00 (ex. VAT) 1 in stock

Laboratory Thermal Equipment Incubator (Cream) Copper Lab

ITEM-46074

Laboratory Thermal Equipment Incubator (Cream) Copper Lab


This item was removed from a university lab where it was surplus to requirement.


It powers on and is in working order.


It is in reasonably poor cosmetic condition.


Features a copper interior.

Image of Base for Incubator Stack - Unbranded

£ POA 1 in stock

Base for Incubator Stack - Unbranded

ITEM-41056

This item is new in stock. Please enquire for further details.

Image of Thermo Scientific MaxQ 8000 Shaker Incubator Model:444 SHKE8000-1CE Lab

£ POA 1 in stock

Thermo Scientific MaxQ 8000 Shaker Incubator Model:444 SHKE8000-1CE Lab

ITEM-47417

This item is new in stock. Please enquire for further details.

Image of Binder CB 210 CO2 Incubator Lab

£ POA 1 in stock

Binder CB 210 CO2 Incubator Lab

ITEM-50436

This item is new in stock. Please enquire for further details.

Image of RSBiotech Galaxy R+ 170-300 PLUS Co2 Incubator Lab

£ POA 1 in stock

RSBiotech Galaxy R+ 170-300 PLUS Co2 Incubator Lab

ITEM-43175

This item is new in stock. Please enquire for further details.

Items 101 to 128 of 128

Filters

Price (£)

to

Condition