Incubators and Growth Chambers

£ 1,485.00 (ex. VAT) 1 in stock

Scientific Industries Incubator-Genie SI-1403 Shaking Incubator Lab

ITEM-35989

Scientific Industries Incubator-Genie SI-1403 Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but may need slight calibration. (Digital thermometer used for testing, not included).

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 1,450.00 (ex. VAT) 1 in stock

Thermo Heracell 150 Floor-Standing Incubator CO2 Lab

ITEM-45377

Thermo Heracell 150 Floor-Standing Incubator CO2 Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and has been recertifed.

Specifications.

Model: HERAcell 150
Serial No.: 40665928

RECERTIFIED ITEM

£ 1,450.00 (ex. VAT) 1 in stock

Thermo Scientific Heraeus Cytoperm 2 CO2 Incubator Lab

ITEM-35704

Thermo Scientific Heraeus Cytoperm 2 CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition and has been recertified to full working order.

Item contains 6 compartments, with each shelf measuring: D50xW26xH2cm.

RECERTIFIED ITEM

£ 1,450.00 (ex. VAT) 1 in stock

Thermo Model Heracell 150 CO2 Floor-Standing Incubator Lab

ITEM-45376

Thermo Heracell 150 Floor-Standing Incubator CO2 Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and full working order.

It has been recertified by an engineer, the report is available on request.

Specifications.

Model: HERAcell 150
Serial No.: 40665928

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Hera Cell 150 Incubator Heraeus Thermo Electron Corporation Lab

ITEM-41601

Hera Cell 150 Incubator Heraeus Thermo Electron Corporation Lab

This item was removed from a university where it was surplus to requirement.

The unit has been recertified, and is in reasonably good cosmetic condition.

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Kendro HeraCell 150 Heraeus Incubator Lab

ITEM-41645

HeraCell 150 Heraeus Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit has been recertified and is in good working order.

RECERTIFIED ITEM

£ 1,350.00 (ex. VAT) 1 in stock

Sanyo MCO-18AC CO2 Incubator Lab

ITEM-38888

Sanyo MCO-18AC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition.

This unit has been professionally serviced and is in full working order.

The service report is available on request.

£ 1,300.00 (ex. VAT) 1 in stock

Jouan Water Jacketed Incubator Model IG150 Lab

ITEM-29770

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surplus to requirements.

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation.

It is in good cosmetic condition with minor marks.

Internal dimensions are: L41cm x W41cm x H60cm.

£ 1,300.00 (ex. VAT) 1 in stock

New Brunswick Scientific Classic C24 Incubator Shaker Lab

ITEM-31977

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm.

It is in reasonable cosmetic condition but has some fairly heavy usage marks.

Internal dimensions - L54 W52 H36cm

Shaker Platform - 45.5 x 45.5cm

Tube stand inside holds 20 x 50ml tubes

£ 1,270.00 (ex. VAT) 1 in stock

Jouan IGO150 CELLlife CO2 Laboratory Incubator Lab

ITEM-17203

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation.

It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level.

Internal dimensions 48x58x48cm LWH

£ 1,250.00 (ex. VAT) 1 in stock

BMG LabTechnologies ThermoStar Microplate Incubator Shaker Lab

ITEM-46380

BMG LabTechnologies ThermoStar Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in working order.

RECERTIFIED ITEM

£ 1,250.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

ITEM-37017

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

Please note: This item has had its humidity sensor removed, therefore it no longer supports humidity control features.

It is in good cosmetic condition with minor marks.

2 Shelves - 52 x 48cm

£ 1,200.00 (ex. VAT) 1 in stock

Binder KB 240 Incubator Lab

ITEM-43004

Binder KB 240 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 1,200.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Incubator Lab

ITEM-43007

Sanyo MIR-153 Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 1,100.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC C02 Incubator Lab

ITEM-35304

Sanyo MCO-20AIC C02 Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer and CO2 sensor not included).

It is in good cosmetic condition internally and externally.

Internal dimensions are as follows:

L57cm x W45cm x H66cm.

Features:

2 x Shelves

£ 1,065.00 (ex. VAT) 1 in stock

Shel Lab Model 1565 Laboratory Incubator Double Stack Lab

ITEM-29773

Shel Lab Model 1565 Laboratory Incubator Double Stack

This was removed from a university lab where it was surplus to requirements.

Both units power up and are working but require temperature calibration. (thermometer not included)

The internal dimensions of each unit are: L50cm x W49cm x H65cm. - No shelving included.

They are in good cosmetic condition with minor marks from use.

SPARES/REPAIR ITEM

£ 1,050.00 (ex. VAT) 1 in stock

New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40992

New Brunswick Innova Model 4330 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit heats but does not cool. The shaking works, but requires maintenance.

It is sold for spares/repairs.

£ 1,040.00 (ex. VAT) 1 in stock

New Brunswick Scientific G-25 Foor Standing Incubator Shaker Lab

ITEM-35604

New Brunswick Scientific G-25 Foor Standing Incubator Shaker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in full working order.

It is in reasonable cosmetic condition but has seen some heavy use and has lots of marks and scuffs.

Shaker platform - 76 x 46cm

£ 1,000.00 (ex. VAT) 1 in stock

Binder BD 115 Incubator Lab

ITEM-47350

Binder BD 115 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The lab confirmed the unit was in full working order prior to removal.

£ 1,000.00 (ex. VAT) 1 in stock

Binder C150 CO2 Laboratory Incubator Lab

ITEM-23983

This Binder C150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with marks from use.

It is in good working order but will require calibration upon installation.

The internal dimensions are H 59cm x W 49cm D 49cm

There are 3 shelves with 6 fitting positions

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

Sartorius Certomat BS-1 Double Stack Shaking Incubator Lab Spares/Repairs

ITEM-45555

Sartorius Certomat BS-1 Double Stack Shaking Incubator

This item was removed from a university laboratory where it was surplus to requirements.

Both incubator units are in good used cosmetic condition and power on, but each has functional issues:

Top Unit: Heats up as expected but does not shake.
Bottom Unit: Powers up but displays an error message in German on startup and continuously loops the startup sequence.

Efforts to troubleshoot both units were unsuccessful, and therefore are sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs

ITEM-40991

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up but does not shake. The heating and cooling functions work.

It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova CO-170 Lab Spares/Repairs

ITEM-40039

New Brunswick Scientific Innova CO-170 Lab

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in fairly poor cosmetic condition with some rust, it has been temperature-tested. (thermometer not included)

The unit developed a back-light fault in the screen during CO2 testing. It is sold as Spares/Repair.

£ 1,000.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

ITEM-45450

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has fully tested

Specifications;

Model: 170-300
S/N: 2434

£ 1,000.00 (ex. VAT) 1 in stock

Wheaton Science Products Model: 1057606-D Reach-In Co2 Incubator Lab

ITEM-38252

Wheaton Science Products Model: I057606-D Reach-In Co2 Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (Thermometer, CO2 analyser and Socket tester are not included).

It is in good cosmetic condition both internally and externally.

Specifications.

Includes 10 x shelves.
Internal Volume: 1000 litres.
Model: I057606-D.
Serial No: I057606-D.

£ 1,000.00 (ex. VAT) 1 in stock

New Brunswick Scientific Co G-25 Shaking Incubator Lab

ITEM-42975

New Brunswick Scientific Co G-25 Shaking Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and in working order.

Specifications:

Model - G-25
S/N - 281548

SPARES/REPAIR ITEM

£ 950.00 (ex. VAT) 1 in stock

New Brunswick Innova Type 4330 Incubator Shaker Lab

ITEM-40993

This New Brunswick Innova Type 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.

The unit powers up and heats, but does not cool or shake.

It is sold for spares/repairs.

£ 910.00 (ex. VAT) 1 in stock

Genlab Model SP/LCI/320/SS/DIG Lab Incubator

ITEM-38911

Genlab SP/LCI/320/SS/DIG Laboratory Incubator

This was removed from a working lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks

6 Baskets/Drawers - 51 x 50 x 15cm

£ 840.00 (ex. VAT) 1 in stock

Sanyo MCO-15AC Lab Incubator Co2 Lab

ITEM-42716

Sanyo MCO-15AC Lab Incubator CO2 Lab

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in complete working order.

Item supplied with three shelves.

It is in good cosmetic condition, however the door handle has been removed, the latch and seal remain in good working order.

£ 800.00 (ex. VAT) 1 in stock

Nuaire Laboratory CO2 Incubator Model NU-5500E Lab

ITEM-46363

Nuaire Laboratory Incubator Model NU-5500E Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs

ITEM-45166

New Brunswick Innova 44R Incubator Broken Shaker Lab

This item was removed from a university lab where it was surplus to requirements.

The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.

The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.

Due to the faulty shaker element, this item is listed as Spares/Repair.

Specifications:

Model: Innova 44R
Condition: Fair, requires repair for shaker motor
Functionality: Incubation temperatures tested and reached correctly

£ 750.00 (ex. VAT) 1 in stock

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

ITEM-44775

Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order.

Specifications:

Model: SI60
Serial#: R000100205

£ 745.00 (ex. VAT) 1 in stock

Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab

ITEM-29757

This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. It will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item has 4 shelves.

Internal dimensions are L49cm x W48cm x H66cm.

£ 745.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab

ITEM-29766

This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.

The unit powers up and is in good working order but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use.

Item is supplied with 4 shelves.

Internal dimensions are L45cm x W45cm x H66cm.

£ 715.00 (ex. VAT) 1 in stock

LTE Scientific IP100-U Laboratory Incubator Lab

ITEM-36518

LTE Scientific IP100-U Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Sanyo MIR-553 Incubator Lab Spares/Repairs

ITEM-36207

Sanyo MIR-553 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the power relay is short circuited so it runs overtemp.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Infors Minitron Shaking Incubator Model AI 72 Lab Spares/Repairs

ITEM-44641

Infors Shaking Incubator Model-AI 72 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower.

Therefore, it is listed as Spares/Repair.

£ 700.00 (ex. VAT) 1 in stock

Grant-Bio PHMP-4 Microplate Thermoshaker Lab

ITEM-46367

Grant-Bio PHMP-4 Microplate Thermoshaker

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and is in full working order.

This psu is included.

£ 675.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

ITEM-29748

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus

This was removed from a university lab where it was surplus to requirements.

The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).

It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Sanyo MIR-253 Cooling Laboratory Incubator Lab

ITEM-39066

Sanyo MIR-253 Cooling Laboratory Incubator

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

£ 600.00 (ex. VAT) 1 in stock

GenLab Incubator Model INC/150/F/DIG Lab

ITEM-46084

GenLab Incubator Model INC/150/F/DIG Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 600.00 (ex. VAT) 1 in stock

GenLab Incubator Model-INC/150/F/DIG Lab

ITEM-46083

GenLab Incubator Model INC/150/F/DIG Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 600.00 (ex. VAT) 1 in stock

Sanyo CO2 Laboratory Incubator MCO-17AIC IR Lab

ITEM-29769

This Sanyo CO2 Laboratory Incubator MCO-17AIC was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but will need to be calibrated upon installation.

It is in good cosmetic condition with minor marks from use. The handle has come off, but this does not affect the operation of the unit.

Item is supplied with 4 shelves.

Internal dimensions are: L45cm x W45cm x H66cm.

£ 600.00 (ex. VAT) 1 in stock

Brinsea OVA-Easy Advance Incubator Lab

ITEM-46639

Brinsea OVA-Easy Advance Incubator

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

Features;

3 Shelves - (64 x 34cm) Holds 18 x eggs each

£ 600.00 (ex. VAT) 1 in stock

Brinsea Model OVA-Easy Advance Incubator Lab

ITEM-46640

Brinsea OVA-Easy Advance Incubator

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

Features;

3 Shelves - (64 x 34cm) Holds 18 x eggs each

£ 600.00 (ex. VAT) 1 in stock

Sanyo MCO-17AIC Co2 Incubator Lab

ITEM-43006

Sanyo MCO-17AIC Co2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good working order and in good cosmetic condition, except for a broken handle. The door seal is in good condition.

£ 555.00 (ex. VAT) 1 in stock

Genlab LCI/12V/DIG/SMC Laboratory Incubator Lab

ITEM-38914

Genlab Model LCI/12V/PDIG Lab Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included)

4 Shelves - 60 x 60cm

£ 550.00 (ex. VAT) 1 in stock

Genlab Prime PRI/150 Laboratory Incubator Lab

ITEM-38908

Genlab Prime PRI/150 Laboratory Incubator

This was removed from a working lab where it was surplus to requirements

The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

2 Shelves - 49 x 48cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Cytomat 24 C-GR Spares/Repair Lab

ITEM-40010

Thermo Scientific Cytomat 24 C-GR Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, however, the unit has a Com port error when connected to Cytomat software.

The internal screen within the door (used for the stacker system) does not power on, and there appear to be faults affecting the stacker system overall.

As such, this item is listed as spares or repair.

Please note: Software not included.

Incubators and Growth Chambers

Filters