Incubators and Growth Chambers
Items 81 to 100 of 186
£ 950.00 (ex. VAT) 1 in stock
Gallenkamp IOI400.XX2.C Floor Standing Shaking Incubator Lab
ITEM-12238
This Gallenkamp IOI400.XX2.C Refrigerated Shaking Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested.
It was tested using a Thermo Smart-Vue gauge (not included).
The gauge showed 37.4ºC when the unit was set to 37ºC.
The gauge showed 59.8ºC when the unit was set to 60ºC (Max).
The max rpm is 400, which the unit runs fine at. The first digit of the rpm screen does have issues, but the rpm can still be set ok.
It is not a refrigerated unit.
Inner dimensions: 85.5cm L x 35cm W.
Shaker plate dimensions: 69cm L x 49cm W.
£ 935.00 (ex. VAT) 1 in stock
Sanyo CO2 MCO-20AIC Laboratory Incubator Lab
ITEM-29761
This Sanyo CO2 MCO-20AIC Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit is in good working order but will need to be calibrated upon installation.
It is in good cosmetic condition with minor marks from use.
Item is supplied with 3 shelves.
Internal dimensions are L58cm x W45cm x H66cm.
£ 920.00 (ex. VAT) 1 in stock
Binder BD53 Bench-Top Microbiological Laboratory Incubator Natural Convection
ITEM-35474
Binder BD53 Bench-Top Microbiological Laboratory Incubator Natural Convection
This was removed from a university lab where it was surplus to requirements.
The unit powers up and has been tested with a digital thermometer (not included). It is in good working order, and is in good cosmetic condition with marks from use.
3 x Shelves 30cm x 40cm
£ 890.00 (ex. VAT) 1 in stock
Sanyo CO2 Incubator Model - MCO-18AIC (UV) Lab
ITEM-27468
This Sanyo CO2 Incubator Model - MCO-18AC was removed from a university lab where it was surplus to requirements.
The unit is in good working order but the UV lamp requires a replacement bulb. We can look at replacing this for you upon purchase.
The unit will need calibration on installation.
It is in good cosmetic condition with minor marks from use.
Internal dims - D51 W48 H65
4 Shelves - 45 x 45cm
£ 875.00 (ex. VAT) 1 in stock
LEEC SFC3C/RH Humidity Cabinet Lab
ITEM-36815
LEEC SFC3C/RH Humidity Cabinet was removed from a university lab where it was surplus to requirements.
It powers up and is in working order. The humidity functions were not tested.
It is in good cosmetic condition with marks from use.
5 shelves - 48 x 48cm
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 835.00 (ex. VAT) 1 in stock
Thermo Scientific Max Q 4000 Shaking Incubator Lab Spares/Repairs
ITEM-30287
This Thermo Scientific Max Q 4000 Shaking Incubator was removed from a university lab where it was surplus to requirements.
The unit would not power up in testing. We swapped the boards out but still could get it to power. There were loose parts inside, so we assume it has been stripped. It has a very worn drive section.
It's in reasonable cosmetic condition with some marks from use.
It is sold for spares/repairs.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 825.00 (ex. VAT) 1 in stock
Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator Lab
ITEM-19303
This Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit has been fully tested and recertified by a service engineer. We have a copy of the report available if needed. It is fully working but the O2 sensor is out of date (user replaceable).
2 Shelves - 52 x 49cm
It is in good cosmetic condition but has some minor marks from use
£ 800.00 (ex. VAT) 1 in stock
Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator Lab
ITEM-29766
This Sanyo MCO-18AIC CO2 (UV) Laboratory Incubator was removed from a university lab where ti was surplus to requirements.
The unit powers up and is in good working order but will need to be calibrated upon installation.
It is in good cosmetic condition with minor marks from use.
Item is supplied with 4 shelves.
Internal dimensions are L45cm x W45cm x H66cm.
£ 800.00 (ex. VAT) 1 in stock
Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator Lab
ITEM-29757
This Sanyo CO2 MCO-18AIC UV IR Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order. It will need to be calibrated upon installation.
It is in good cosmetic condition with minor marks from use.
Item has 4 shelves.
Internal dimensions are L49cm x W48cm x H66cm.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 795.00 (ex. VAT) 1 in stock
Heraeus HeraCell 150 CO2 Laboratory Incubator Lab
ITEM-18316
This Heraeus HeraCell 150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit has been tested, inspected and recertified by a qualified service engineer. The report is available on request.
The unit is in good cosmetic condition with only minor marks from use. The rear access bung is missing but doesn't affect the function at all.
Included with it are a set of shelves and a stainless steel box.
Inner dimensions: 47.5cm L x 54cm W x 61cm H.
Shelf dimensions: 46.5cm L x 42cm W.
Box dimensions: 46cm L x 49.5cm W x 22cm H.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 790.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator MCO-18AIC UV IR Lab
ITEM-30502
This Sanyo CO2 Laboratory Incubator MCO-18AIC was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in full working order.
It is in good cosmetic condition with minor marks from use.
External Dimensions - D71 W64 H90cm
Internal Dimensions - D51 W48 H66cm
4 x Shelves - 45 x 45cm
1 Tray - 40 x 29 x 5cm
£ 775.00 (ex. VAT) 1 in stock
New Brunswick Scientific Innova 4000 Benchtop Incubator Shaker Lab
ITEM-30218
This New Brunswick Scientific Innova 4000 Benchtop Incubator Shaker was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 500rpm. It was tested with a digital thermometer (not included).
The temperature was first set to 37°c, when reached, the thermometer read 42.8˚c
The temperature was then set to 60˚c (max) when reached, the thermometer read 64.4˚c
It is in reasonable cosmetic condition with some marks from use.
Internal Dimensions:
D48.3 W50.2 H33.6cm
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 745.00 (ex. VAT) 1 in stock
Thermo Scientific BB 15 CO2 Laboratory Incubator Lab
ITEM-20238
This Thermo Scientific BB-15 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition externally, Internally the plating has started to rust. This does not affect the operation of the unit.
It has been tested and recertified by a qualified service engineer. We have the reports available on request.
Unit dimension:
L75cm x W64cmx H86cm
£ 745.00 (ex. VAT) 1 in stock
LTE Scientific IP100-U Laboratory Incubator Lab
ITEM-36518
LTE Scientific IP100-U Laboratory Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).
£ 715.00 (ex. VAT) 1 in stock
RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab
ITEM-29748
RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus
This was removed from a university lab where it was surplus to requirements.
The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).
It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 700.00 (ex. VAT) 1 in stock
Sanyo Co2 Laboratory Incubator Model MCO19AIC (UV) Lab
ITEM-19546
This Sanyo Co2 Laboratory Incubator Model MCO19AIC (UV) was removed from a university lab where it was surplus to requirements.
The unit has been fully tested by a service engineer. We have the full report available on request if you would like to see it.
There are no shelves or drip tray included, but it is in otherwise excellent cosmetic condition with minor marks from use.
Internal dimensions: 50x50x68cm LWH
£ 695.00 (ex. VAT) 1 in stock
Memmert INB 200 Laboratory Incubator Lab
ITEM-34925
Memmert INB 200 Laboratory Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digital thermometer not included).
It is in good cosmetic condition with minor marks.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 660.00 (ex. VAT) 1 in stock
Thermo Scientific MaxQ 4000 Analog Incubator Shaker SHKA4000-1CE Faulty
ITEM-37029
Thermo Scientific MaxQ 4000 Analog Incubator Shaker
This was removed from a university lab where it was surplus to requirements.
The unit would not power up and tripped the electrics during testing. We believe the motor controller is faulty. The gas struts for the lid have also failed.
It is in otherwise good cosmetic condition with marks from use.
£ 645.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator MCO-17AIC IR Lab
ITEM-29769
This Sanyo CO2 Laboratory Incubator MCO-17AIC was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order, but will need to be calibrated upon installation.
It is in good cosmetic condition with minor marks from use. The handle has come off, but this does not affect the operation of the unit.
Item is supplied with 4 shelves.
Internal dimensions are: L45cm x W45cm x H66cm.
£ 640.00 (ex. VAT) 1 in stock
Heraeus HeraCell & HeraCell 150 CO2 Laboratory Incubator Stack Lab
ITEM-23463
This Heraeus HeraCell & HeraCell 150 CO2 Laboratory Incubator Stack was removed from a university lab where it was surplus to requirements.
The incubators are stacked and secured with a bracket. Both power up and have been tested with 5% CO2 and a digital thermometer (not included).
Both units are in good condition with various minor marks from general use.
The top unit only has two shelves.
The bottom has all three.
Included are;
1 x Heraeus Co2 Incubator
Model Hera Cell
Interior dimensions:
W48cm x D48cm x H61cm
The unit powers on and is in good cosmetic condition. There are some light tape marks around the unit from general use.
Tested with 5% CO2, our testing has confirmed CO2 is functional.
Temperature testing:
Set temp at 18ºC our thermometer read 17.1ºC (units internal thermometer 18ºC)
Set temp at 37ºC our thermometer read 37.4ºC (units internal thermometer 37ºC
Set temp at 55ºC our thermometer read 55.4ºC (units internal thermometer 54.3ºC)
And
Thermo Electron Corporation Heraeus Incubator
Model: HERAcell 150
The item is in reasonable cosmetic condition. There are stains and scratches on the surface. The interior is very clean and without blemishes.
Internal dimensions:
53cm D x 47cm W x 61cm H
Tested with 5% CO2, our testing has confirmed CO2 is functional.
When was set to 18˚C, the display showed 18.6˚C and the thermometer measured 18.3˚C
When set to 37˚C, the display showed 37˚C and the thermometer measured 36.8˚C
When set to 55˚C, the display showed 54.7˚C and the thermometer measured 54.6˚C
Items 81 to 100 of 186