General Laboratory
Items 501 to 550 of 893

£ 810.00 (ex. VAT) 1 in stock
Eppendorf ThermoStat C Dry Block Heater Lab
ITEM-48334
Eppendorf ThermoStat C Dry Block Heater Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
The lab confirmed it was in good working order prior to removal.

£ 805.00 (ex. VAT) 1 in stock
ALC Multispeed Refrigerated Centrifuge PK 121 R + T515 4300rpm Rotor Lab
ITEM-16480
This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works.
The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37.
The Rotor number displayed T515.
The Buckets Serial number is 0306/01.
The buckets Cat Number is 11210335.
The number on the bottom of the buckets is Ch. 007027 S.303.
The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435.
The ALC 2035 Adapter is for 50ml tubes.

£ 800.00 (ex. VAT) 1 in stock
Beckman J-6B Refrigerated Ultracentrifuge w/ JS4.2 rotor & 6 x Buckets Lab
ITEM-47408
Beckman J-6B Refrigerated Ultracentrifuge with JS4.2 Rotor & 6 x Buckets
This item was removed from a university where it was surplus to requirements.
It is in good working order and in reasonably good cosmetic condition, with typical signs of age and use.
During testing, the unit achieved its maximum rated speed of 4200 rpm and was successfully temperature tested.
Includes:
- JS4.2 rotor
- 6 x buckets
- Various Beckman bucket adapters

£ 800.00 (ex. VAT) 1 in stock
Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab
ITEM-47241
Air Liquide Arpege 55 Liquid Nitrogen Dewar w/ Storage Racks Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and remains untested.
Included;
6 x Sample Storage Racks.

£ 800.00 (ex. VAT) 1 in stock
Oxford Cryo Systems Crystal Diffractometer Cryostream Probe Lab
ITEM-46195
Oxford Cry Systems Crystal Diffractometer Cryostream Probe
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition. It was not possible to test the functionality at our facility.
Includes:
- Single crystal diffractometer cryostream probe

£ 800.00 (ex. VAT) 1 in stock
Beckman GS-6KR Centrifuge with PTS-2000 Rotor Lab
ITEM-37244
Beckman GS-6KR Centrifuge
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and working order.
During tested, the item reached a maximum temperature of 32ºc, but successfully chilled to a minimum of -10ºc. It was tested at the rotors top speed of: 3250 RPM.
Includes:-
- Beckman PTS-2000 Swinging Bucket Rotor Centrifuge
- 4 x Buckets, the cover for one of the baskets is not included.

£ 800.00 (ex. VAT) 1 in stock
Beckman Coulter Centrifuge Rotor Type 50.2 Ti Lab
ITEM-41839
Beckman Coulter Rotor Type 50.2 Ti
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
Features:
- Type - 50.2 Ti
- Max RPM - 50,000
- The Unit Has 12 x Slots For Vials
- Only Use in Instruments Classified H, R, S

£ 800.00 (ex. VAT) 1 in stock
Millipore Milli-Q Reference A+ Water Purification System Lab
ITEM-46833
Millipore Milli-Q Reference A+ Water Purification System Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 800.00 (ex. VAT) 1 in stock
GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab
ITEM-47240
GT 55 Liquid Nitrogen Dewar w/ Storage Racking Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and remains untested.
Included;
6 x Storage Racking.

£ 800.00 (ex. VAT) 1 in stock
Nuaire Laboratory CO2 Incubator Model NU-5500E Lab
ITEM-46363
Nuaire Laboratory Incubator Model NU-5500E Lab
This item was removed from a university lab where it was surplus to requirement.
The unit powers up and is in good working order.
It is in good cosmetic condition.

£ 800.00 (ex. VAT) 1 in stock
Labcaire HLF 12 Laminar Flow Cabinet Lab
ITEM-47502
Labcaire HLF 12 Laminar Flow Cabinet Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and in good working order. (Socket tester not included.)
Run Hours: 213.6

£ 800.00 (ex. VAT) 1 in stock
Heraeus HERAguard HPH 12 Clean Bench Laminar Flow Hood Lab
ITEM-48389
Heraeus HERAguard HPH 12 Clean Bench Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order, having been serviced in March 2025. (Socket tester not included.)

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 800.00 (ex. VAT) 1 in stock
Hitachi Sorvall Discovery M120 Refrigerated S/R Broken Motor Mount Lab
ITEM-47196
Sorvall Discovery M120 Floor-Standing Refrigerated Centrifuge Spares/Repair Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on, however, further testing was not possible due to the motor mount being broken.
Therefore, it is listed as Spares/Repair.

£ 800.00 (ex. VAT) 1 in stock
Illumina High-Speed Microplate Shaker Lab
ITEM-45049
Illumina High-Speed Microplate Shaker
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition.
RPM:
- Tested at 600 RPM (lowest)
- Tested at 1000 RPM
- Tested at 2500 RPM (maximum)

£ 800.00 (ex. VAT) 1 in stock
New Brunswick Scientific Ultra Low Temperature Freezer Model U410 -45
ITEM-41362
New Brunswick Scientific Ultra Low-Temperature Freezer Model-U410 -45
This item was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order to -45˚C. It was tested with a digital thermometer (not included).
It is in great cosmetic condition.

£ 760.00 (ex. VAT) 1 in stock
Heraeus Labofuge 400 Function Line Benchtop Centrifuge 3500rpm Max Lab
ITEM-36950
Heraeus Labofuge 400 Function Line Benchtop Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 3500rpm.
It is in reasonable cosmetic condition with light marks and rusting.
Heraeus Rotor #8179
4 x Buckets #8172 Ch.003515

£ 750.00 (ex. VAT) 1 in stock
Beckman Coulter BioMek NXp Laboratory Automation System Lab
ITEM-48510
Beckman Coulter BioMek NXp Laboratory Automation System
This item was removed from a facility where it was surplus to requirements.
The unit powers on and is in reasonable cosmetic condition. It has powered on but could not be tested further.
The included PC has Biomek software installed.
Includes:
- Lenovo PC & monitor
- Keyboard & mouse
- Beckman Coulter FX Device Controller (unable to power on, fuses tested with continuity)
- Thermo Scientific Masterflex P/S Easy-Load II Model 956-0025 (powers on, appears to function)
- Beckman Coulter Accuframe
- MS-3 Laser Microscan
- Thermo Scientific Shakemodul for shaking plates in the unit
- Various cables
- Acronis True Image Home 2009
- 3 x 10 boxes of Biomek P50 pipette tips
- 1 x 9 boxes of Biomek P50 pipette tips
- 2 x sealed boxes of Biomek Span P1000 pipette tips (5 x 96 tips each)
- Extra plates and rubber inserts

£ 750.00 (ex. VAT) 1 in stock
Bigneat F3-XIT-D Powder Weighing and Handling Cabinet Lab
ITEM-32104
This Bigneat F3-XIT-D Powder Weighing and Handling Cabinet was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with some marks and paint chips/rust from use.

£ 750.00 (ex. VAT) 1 in stock
BIGNEAT F3-XIT BPXS03/01A Powder Weighing Station Safety Cabinet Lab
ITEM-34881
BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

£ 750.00 (ex. VAT) 1 in stock
Jouan VXS 570 Laboratory Deep Freezer -85C Lab ULT Ultra Low Temperature Freezer
ITEM-21171
This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to requirements.
The unit powers up and was tested with a digital thermometer.
It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C.
The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.

£ 750.00 (ex. VAT) 1 in stock
Alphelys MiniCore Tissue Arrayer Lab
ITEM-30468
This Alphelys MiniCore Tissue Arrayer was removed from a university lab where it was surplus to requirements.
The unit powers up and the laser turns on immediately. It was not tested further.
It is in good cosmetic condition with some minor marks from use.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Sorvall Discovery 100SE Refrigerated Floor Standing Centrifuge Lab Spares/Repair
ITEM-29790
Sorvall Discovery 100SE
This was removed from a university lab where it was surplus to requirements.
The unit is missing the power switch and the cable is split. It looks like some other parts have been removed and cables have been disconnected inside.
It is in otherwise reasonable cosmetic condition with minor marks from use. The rear panel is showing signs of damage.
It is sold for spares/repairs.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Boxer Autoclave Lab Spares/Repairs
ITEM-24843
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has a faulty temp controller. It is sold for spares/repairs.
We are unsure of the model as there is no spec plate on the unit.

£ 750.00 (ex. VAT) 1 in stock
Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators
ITEM-37620
Job Lot of 18 Electro Nickel Clifton 1026E Boiling Baths with ER1 Regulators
These were removed form a university lab where they were surplus to requirements.
The units are all in good working order.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Beckman Optima LE-80K Centrifuge Spares/Repair Lab
ITEM-46445
Beckman Optima LE-80K Centrifuge Spares/Repair
This item was removed from a university laboratory where it was surplus to requirements.
It powers on, but encounters issues when attempting to reach set speeds; the machine beeps and displays messages about microns and speed, then slows down.
Therefore, it is listed as Spares/Repair.

£ 750.00 (ex. VAT) 1 in stock
Ealing Optical Isolation Tabletop Breadboard 149x120x25cm on Bench 156x92x72m
ITEM-42418
Ealing Optical Isolation Tabletop Breadboard on Lab Bench
This item was removed from a university laboratory where it was surplus to requirements.
The optical table was originally part of a larger table that has been cut into two separate pieces, each listed separately. The cut edge is somewhat uneven. The table does not come with legs but is currently placed on a lab bench that is included.
It is in good cosmetic condition.
Table Specifications:
- Size: 149 x 120 x 25 cm (Length x Width x Height)
- Thread Size: Imperial UNF 1/4" - 28
- Matrix: 2" square, featuring a grid of 29 x 23 holes
Lab Bench Specifications:
- Size: 156 x 92 x 72 cm (Length x Width x Height)
- Material: Tubular steel frame with a wooden tabletop

£ 750.00 (ex. VAT) 1 in stock
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
ITEM-37249
Thermo Scientific DualSpin Rotor for Medifuge Centrifuge 75008810
This item was removed from a university where it was surplus to requirement.
It is in good, used cosmetic condition.
Specifications:
- Type: 2-in-1 Fixed Angle and Swinging Bucket Rotor
- Max RCF: 3,114 x g (Fixed Angle), 3,490 x g (Swinging Bucket)
- Radius: 116/37 mm Fixed Angle, 130/42 mm Swinging Bucket
- Angle: 45° Fixed, 12 to 87° Swinging Bucket
- Capacity: 8 x 15 mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)
- Max Speed: 300 to 4,900 rpm, adjustable in increments of 100 rpm

£ 750.00 (ex. VAT) 1 in stock
Audion AudionVac Digital VMS 133 Vacuum Sealing Machine
ITEM-47135
Audion AudionVac Digital VMS 133 Vacuum Sealing Machine
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in working order.
Includes;
- User Manual
- 3 x Marble Platform

£ 750.00 (ex. VAT) 1 in stock
Sanyo MSE Harrier 18/80 Refrigerated Centrifuge with 6000rpm Rotor Lab
ITEM-40061
Sanyo MSE Harrier 18/80 Refrigerated Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and runs well to 6000rpm. It also cools and incubates as it should.
It is in good cosmetic condition with minor marks.
It is supplied with;
MSE Rotor 43124-141
SN - 7962
Max RPM - 6000
4 x Buckets
4 x Beige Adaptors hold 1 x 50ml tube each

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
Leica CM 1850 UV Cryostat Model - CM1850UV-1-1 Lab Spares/Repairs
ITEM-19889
This Leica CM 1850 UV Cryostat Model - CM1850UV-1-1 was removed from a university lab where it was surplus to requirements.
The unit became misaligned when a side panel acting as a support came loose during routine maintenance. It was working up until this panel came loose.
Due to this, it is sold for spares/repairs. The unit could still be put back together or used for parts with the correct machinery available.
The system was also part of a product recall due to improper labelling so can only be used for parts.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 750.00 (ex. VAT) 1 in stock
New Brunswick Innova 44R Refrigerated Shaking Incubator Lab Spares/Repairs
ITEM-45166
New Brunswick Innova 44R Incubator Broken Shaker Lab
This item was removed from a university lab where it was surplus to requirements.
The incubator is in reasonable good used cosmetic condition, with some rust around the edges of the lower base.
The unit powers on and was successfully temperature tested. However, it has a faulty shaker motor and stuck bolts on the shaker plate, which require significant work for repair, but is entirely possible for someone to do.
Due to the faulty shaker element, this item is listed as Spares/Repair.
Specifications:
- Model: Innova 44R
- Condition: Fair, requires repair for shaker motor
- Functionality: Incubation temperatures tested and reached correctly

£ 750.00 (ex. VAT) 1 in stock
Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab
ITEM-44775
Stuart SI60 Clear Chamber Forced Air Incubator, 60 L Lab
This item was removed from a university lab where it was surplus to requirement.
It is in reasonably good cosmetic condition and in good working order.
Specifications:
- Model: SI60
- Serial#: R000100205

£ 750.00 (ex. VAT) 1 in stock
Thermo Scientific Jouan CR3i Centrifuge w/ FiberLite F14-48x1.5/2 Rotor Lab
ITEM-47618
Thermo Scientific Jouan CR3i Centrifuge with FiberLite F14-48x1.5/2 Rotor
This item was removed from a university laboratory where it was surplus to requirements.
It is in good cosmetic condition and good working order.
Please note: The rotor cannot be removed without a specified tool. (not included)
Includes:
- FiberLite F14-48x1.5/2 Rotor
- S/N: 6081033
- Max RPM: 14,000
- Rotor Accessories:
- Thermo Scientific 11175750 T20
- Max Load: 1.4 kg
- Max RPM: 4,100
- Thermo Scientific Corporation T20
- Max Load: 1.4 kg
- Max RPM: 4,100
- 3 x Thermo Scientific Swinging Buckets
- Cat. No.: 11210436
- Eq.: 40924916
- 511 g each
- 4 x Thermo 19-hole Sample Holders (1.2 cm x 1.2 cm x 9 cm per hole)
- 4 x Thermo 5-hole Sample Holders (2.5 cm x 2.5 cm x 8 cm per hole)
- 4 x Thermo 4-hole Sample Holders (2.5 cm x 2.5 cm x 9 cm per hole)
- 3 x Thermo 5-hole Sample Holders (3 cm x 3 cm x 9 cm per hole)

£ 750.00 (ex. VAT) 1 in stock
Sanyo MCO-18AIC UV Co2 Incubator Lab
ITEM-42720
Sanyo MCO-18AIC(UV) Co2 Incubator Lab
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order.
It is in very good cosmetic condition.

£ 745.00 (ex. VAT) 1 in stock
BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station Lab
ITEM-34875
BIGNEAT F3-XIT BPXS03/01A Safety Cabinet Powder Weighing Station
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in good cosmetic condition with marks from use.

£ 725.00 (ex. VAT) 1 in stock
LEC LSFSF312BT Medical Laboratory Freezer - Lab
ITEM-47087
LEC LSFSF312BT Medical Laboratory Freezer - Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.

£ 725.00 (ex. VAT) 1 in stock
Reichert-Jung Ultracut E Microtome 70 17 74 Lab
ITEM-35673
Leica Reichert Ultracut E Microtome
This was removed from a university lab where it was surplus to requirements.
The unit was tested with a controller from another unit (not included), but was found to power up and operate correctly.
It is in good cosmetic condition with minor marks
Head - Reichert Stereo Star Zoom
0.7X to 3.0X 569
2 x Eye pieces - 15X W.F 184

£ 720.00 (ex. VAT) 1 in stock
LEC Medical LSFSF312BT Laboratory Freezer - Lab
ITEM-47086
LEC Medical LSFSF312BT Laboratory Freezer - Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.

£ 715.00 (ex. VAT) 1 in stock
LEC Medical Model: LSFSF312BT Laboratory Freezer Lab
ITEM-46984
LEC Medical Model: LSFSF312BT Laboratory Freezer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.

£ 715.00 (ex. VAT) 1 in stock
LTE Scientific IP100-U Laboratory Incubator Lab
ITEM-36518
LTE Scientific IP100-U Laboratory Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

£ 710.00 (ex. VAT) 1 in stock
LEC Medical LSFSF312BT Laboratory Freezer Lab
ITEM-46983
LEC Medical LSFSF312BT Laboratory Freezer Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
Please note: this item is missing a drawer.

£ 710.00 (ex. VAT) 1 in stock
Torrey Pines Scientific Inc Echotherm Chilling/heating Plate IC22-2
ITEM-38440
Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order. It was tested with a digital thermometer (not included).
It is in good cosmetic condition.

£ 710.00 (ex. VAT) 1 in stock
Sartorius Arium Mini Model H20-MA-UV-T Water Purification System Lab
ITEM-48343
Sartorius Arium Mini Model H20-MA-UV-T Water Purification System Lab
This system was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on.
The lab has confirmed it was in good working order prior to removal.
Please note; It requires new Cartridges and Filters as the current ones have expired.

£ 700.00 (ex. VAT) 1 in stock
BECKMAN Model J2-21 Floor Standing Centrifuge Lab
ITEM-21249
This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was surplus to requirements.
The unit is in full working order but is not supplied with a rotor.
It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 700.00 (ex. VAT) 1 in stock
Rigaku X-Stream 2000 Cryogenic Crystal Cooler System CP830, XS-2000 Lab
ITEM-42071
Rigaku X-Stream 2000 Cryogenic Crystal Cooler System
This system was removed from a university lab where it was surplus to requirements.
The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear.
The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed.
Due to the main unit not powering on, this system is listed as Spares/Repair.
Specifications:
- Main Unit
- Model: CP830
- Serial No.: 1831322-240105A
- Cryogenic Crystal Cooler
- Model: XS-2000
- Serial No.: 800150

£ 700.00 (ex. VAT) 1 in stock
Sartorius EB35EDE-IX Industrial Laboratory Scales Lab
ITEM-44655
Sartorius EB35EDE-IX Industrial Scales Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and working order. As seen, it is powered with a 3-Pin 16A non-standard 1-phase plug.
It was tested with an in-house 200g Calibration weight.

£ 700.00 (ex. VAT) 1 in stock
Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 Lab
ITEM-38439
Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2
This item was removed from a university where it was surplus to requirement.
The unit powers up and is in good working order. It was tested with a digital thermometer (not included).
It is in good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock
Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab
ITEM-41473
Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, and powers on, we are unable to test it further at our facility.
This item is fitted with 3-Phase 32amp plug.

£ 700.00 (ex. VAT) 1 in stock
Edwards Freeze Dryer Modulyo Lab
ITEM-39926
This Edwards Freeze Dryer Modulyo was removed from a university lab where it was surplus to requirements.
The item powers on and is in reasonably poor cosmetic condition, unable to test it further at our facility.
It cools down but has not been tested under a vacuum.

£ 700.00 (ex. VAT) 1 in stock
Thermo Scientific T-1250 Fixed Angle Rotor 50,000rpm
ITEM-47395
Thermo Scientific T-1250 Fixed Angle Rotor 50,000rpm
This item was removed from a facility where it was surplus to requirement.
It is in very good cosmetic condition.
The lab confirmed it was in good working order prior to removal.
Items 501 to 550 of 893