General Laboratory

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge Lab Spares/Repairs

ITEM-29745

Beckman Coulter Avanti J-E Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has several faults. The unit requires a new board, flash card and cooling system.

It is in good cosmeti condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Boxer Steam Sterilising Laboratory Autoclave 400/220L Lab Spares or Repairs

ITEM-18171

This Boxer Steam Sterilising Laboratory Autoclave 400/220L was removed from a university lab where it was surplus to requirements.

The unit has controller issue, the temperature display is faulty, the door mechanism is faulty and we were unable to reset it.

It is in reasonably good cosmetic condition but it has marks from previous use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Tuttnauer Vertical Laboratory Autoclave 5050ELV D Steriliser Lab 110L Faulty

ITEM-04932

This Tuttnauer Autoclave 5050ELV-D Steriliser was removed from a university lab where it was surplus to requirements.

The system has been stripped for parts and is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Incubator Lab Spares/Repairs

ITEM-40000

Sanyo MCO-20AIC CO2

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Packard 9200 Hydrogen Generator B920000 Lab Spares/Repairs

ITEM-28161

Packard 9200 Hydrogen Generator

This was removed from a university lab where it was surplus to requirements.

We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen.

It is in reasonably good cosmetic condition, but has some marks from use.

it is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U570 -45 Ultra Low Temperature Freezer Spares/Repairs

ITEM-41126

New Brunswick Scientific U570 -45 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

£ 500.00 (ex. VAT) 1 in stock

Union Carbide Liquified Gas Container Liquid Nitrogen Dewar Lab

ITEM-46190

Union Carbide Liquified Gas Container Dewar

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Don Whitely MK3 Anaerobic Bench Top Work Station Spares/Repair

ITEM-42468

Don Whitely MK3 Anaerobic Bench Top Work Station

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but is not in working order, mainly due to a faulty gas inlet valve.

It powers on with functional temperature control and cooling fans. Key issues include non-working internal power sockets, flashing low CO2 and N2 warning lights, and a broken outer door lock seal knob, which compromises the chamber's sealing.

Due to the faults listed above, this system is listed as Spares/Repair.

Features:

Uses hydrogen, nitrogen, and carbon dioxide or a standard anaerobic gas mixture.
Digital temperature controller for constant temperature maintenance.
Humidistat-controlled condensing plate for excess moisture removal.
30-litre interchange lock capable of holding 108 plates with vacuum flushing.

Includes:

User Instruction Manual

Serial No.: 3170S

£ 500.00 (ex. VAT) 1 in stock

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

ITEM-42425

LEEC Hot and Cold Laboratory Incubator Model PFC2CK Lab

This item was removed from a university lab where it surplus to requirement.

It is good cosmetic condition and good working order.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Spares/repairs

ITEM-42306

Thermo Scientific Hera Freeze HFU Series Model HFU40240BV Lab Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, during testing it failed to cool and remained at ambient temperature when set to -86ºc. Further inspection iden

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer Lab Faulty

ITEM-42305

Thermo Scientific Revco DXF Model DXF24040V Laboratory Freezer

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on. During testing, it failed to reach the set temperature of -40˚C, only cooling down to 7˚C.

Therefore, it is listed as Spares/Repair.

Additionally, three inner door slide catches are missing.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System Lab Spares/Repair

ITEM-46288

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System

This system was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further at our site.

The previous client has notified us that it is not in working order and that Qiagen no longer supports this instrument.

The system is in good cosmetic condition.

Includes:

Cupboards/drawers integrated into the stand
All bottles and solvent traps
A pump
9 x 1100µl tip rack holders
Multiple miscellaneous plate holders
Tube holding racks
Handles for moving the unit
4 x 50µl tip rack holders
1 pack of Elution Microtubes
1 BGR Bottle
Lubricating oil
Various QIAsoft 5.0 disks including operating system, protocol packages, and maintenance disks
Data handbooks
Manuals

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Qiagen BioRobot 8000 Liquid Handling System

ITEM-45167

Qiagen Bio Robot 8000

This item was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and powers on.

However, it displays errors during initialization (Z Motor 6: movement blocked, Code:8008 and Z Motor 8: movement blocked, Code:8008), preventing the robot from homing.

The lab reported that all components work except for one or more dilutor units in the syringe pump system, which Qiagen can no longer supply.

Therefore, this system is listed as Spares/Repair.

Included:

Qiagen Bio Robot 8000
Dell Control PC running Windows 7 with QIAsoft 4.1.4.5 software (discs included)
Keyboard, monitor, and mouse
Pump system
Box containing various spare parts and consumables

£ 500.00 (ex. VAT) 1 in stock

MVE XC 34/18 Nitrogen Dewar Aluminium 34 Litres Capacity

ITEM-42275

MVE XC 34/18 Nitrogen Dewar

This item was removed from a university where it was surplus to requirements.

The dewar is in good cosmetic condition, with signs of use.

Specifications:

Model: XC 34/18
Serial No.: ARB97K105
Capacity: 34 litres
Neck Opening: 9cm
Holds: 6 canisters

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

3 shelves (47 x 43 cm)
Manuals
Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MP Biomedical FastPrep - 24 Sample Preparation System Lab Spares/Repairs

ITEM-37750

This MP FastPrep - 24 Sample Preparation System was removed from a university lab where it was surplus to requirements.

The item powers on and is in a reasonably used cosmetic condition, unable to test further due to a 'Cancel Error'

"Improper closing of the dome will be indicated by display Cancel"

Due to this error, this item is sold as Spares or Repairs.

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model - MDF-U730M Biomedical Freezer Lab

ITEM-44676

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

12 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model MDF-U730M Biomedical Freezer Lab

ITEM-44674

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Type MDF-U730M Biomedical Freezer Lab

ITEM-44675

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

ITEM-37273

Thermo Scientific Savant SPD1010 SpeedVac Concentrator With AC-1 Phase Motor

This item was removed from a university laboratory where it was surplus to requirements.

The Savant SPD1010 SpeedVac powers on but encounters issues during operation. The lid fails to lock when a program is initiated, and although the rotor slightly moves, it does not fully run.

The AC-1 Phase motor operates correctly when tested independently but does not power on when connected to the SpeedVac.

Due to these issues, this unit is listed for spares or repair.

Model: SPD1010

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Spares/Repair

ITEM-37195

Thermo Scientific Forma 8694 -86°C Double Compartment ULT Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, however, during testing, the unit powered on but emitted buzzing sounds followed by hissing and smoke.

Therefore, it is listed as Spares/Repair

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Revco 8930 EXF60086V -86 Freezer Lab Spares/Repairs

ITEM-44605

Thermo Scientific Revco ExF Freezer

This item was removed from a laboratory where it was surplus to requirements.

This item is in fair cosmetic condition.

The unit does not power on and no further tests have been conducted. It is being sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman L8-80MW Ultracentrifuge Lab

ITEM-44394

Beckman L8-80 Ultracentrifuge Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition externally and powers on, however, when tested we attempted to run the unit with a 70Ti rotor (not included), but encountered cooling system and speed sensor errors.

Also, oil was discovered under the rotor and in the chamber/motor area, possibly due to a worn seal.

Due to the above faults, this item is listed as Spares/Repair.

The 3-phase plug has been removed and there is no rotor included in the sale.

Also included:

1 x Operation Key

1 x Original User Manual

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber Lab Faulty

ITEM-37811

Weiss Gallenkamp Sanyo PSC022 Pharma Safe System Stability Chamber

This item was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

It was successfully temperature tested, however, during further testing it failed to retain humidity.

Therefore, it is listed as Spares/Repair.

It has been recently fitted with a new element.

Eurotherm 220 8E controllers for temperature and humidity

Two compartments of size 65cm x 49cm x 20cm (l x w x h)

£ 500.00 (ex. VAT) 1 in stock

Qiagen Rotor-Disc Heat Sealer Lab

ITEM-31394

This Qiagen Rotor-Disc Heat Sealer was removed from a university lab where it was surplus to requirements.

The item powers on and heats up. It is in reasonably good cosmetic condition with minor marks from use.

Holds 36 x 0.2ml and 9 x 2ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Scotsman Ice Machine Model AF20 Lab Spares/Repairs

ITEM-24772

This was removed from a university lab where it was surplus to requirements.

The unit powers up and holds mains water pressure but has an issue with evaporation temperature being high, and/or and issue with auger rotation. It likely requires an NTC sensor.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell AMA240N Floorstanding Autoclave Lab Spares/Repairs

ITEM-39207

Astell ASA240 Floorstanding Autoclave

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition externally. However, the internal plastic lid cover supports have been snapped off to release the lock and remove the lid.

This allows access, but the unit remains inoperable for standard use. Therefore, it is sold as Spares/Repair.

As displayed, it is in poor cosmetic condition internally.

Specifications;

Model- AMA240N
S/N- CLN51381

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Priorclave EV100 Top-Loader Autoclave Lab Spares/Repairs

ITEM-21246

This was removed from a university lab where it was surplus to requirements.

The system has a main board fault. It does not heat up as a result.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 Lab Spares/Repairs

ITEM-30166

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit.

It is sold for Spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Refrigerated Centrifuge Spares/Repairs Lab

ITEM-37628

Beckman L7-65 Refrigerated Centrifuge L7-65R

This was removed from a university lab where it was surplus to requirements.

The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds.

For this reason it is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan BR 3.11 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-39146

Jouan BR 3.11 Refrigerated Centrifuge Lab

This was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers up.

Despite being in reasonably good cosmetic condition, this item is to be sold as Spares or Repairs due to its inability to maintain the set temperature and keep the lid open.

Included:

Jouan B 3.11 Centrifuge G=420 g, 4000 RPM Rotor & 11174179 Buckets

Beckman Coulter SW32Ti Swinging Bucket Rotor

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR Incu-Line Incubator Lab Spares/Repairs

ITEM-39196

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and works, but the door mechanism is broken, and the door will not remain closed.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Sanyo C02 Incubator Model MC0-175 Lab

ITEM-37592

Sanyo C02 Incubator MC0175

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer & co2 analyser not included).

It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken.

The door seal and latch are both in good cosmetic condition.

This item includes 4 x Shelves and a Humidity Pan.

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-554 Incubator Lab Spares/Repairs

ITEM-36213

This was removed from a university lab where it was surplus to requirements.

The unit does not power up.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

LEEC Compact Incubator Model K2N Lab

ITEM-41676

LEEC Compact Incubator Model-K2N Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition internally and externally.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LMS 400NP Cooled Incubator Lab Spares/Repairs

ITEM-42191

LMS 400NP Cooled Incubator

This item was removed from a university where it was surplus to requirement.

The incubator is in excellent cosmetic condition and powers on.

However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C.

Therefore, it is listed as Spares/Repair.

Specifications:

Serial No.: 12425/17PP
Capacity: 450 litres
Internal dimensions: 64 x 55 x 118 cm (l x w x h)
Temperature range: -10°C to 50°C
4 height adjustable shelves (56 x 60 cm)
Factory set auto defrost system

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wheaton 753680-2 Reach In Incubator Lab Spares/Repairs

ITEM-39203

Wheaton 753680-2 Reach In Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but would not heat up further than 35˚C. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR 1927 Reach-In Dry C02 Incubator Lab Spares/Repairs

ITEM-39202

VWR 1927 Reach-In Dry C02 Incubator

This was removed from a university lab where it was surplus to requirement.

The unit initially powered up and worked to 35˚C only, but now will not power up due to a faulty switch.

The top panel is missing.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan CR 412 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-37144

Jouan CR 412 Centrifuge

This unit was removed from a university where it was surplus to requirement.

This item is in reasonably good cosmetic condition.

It powers on, but the button functions are unresponsive to the unit, therefore unable to conduct any testing.

The lid opened with manual emergency release.

It is sold as Spares/Repairs.

Includes the following:

2x Swinging Buckets:

Part no: 11174154

Volume: 450ml

Bucket Vial Adaptor Inserts:

1x set 7x 50ml vials - RED

1x set of 7x 15ml / 16x 6ml vials - BROWN

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Distillation Chiller B-741 Lab Spares/Repairs

ITEM-41104

Buchi Distillation Chiller B-741

This was removed from a university lab where it was surplus to requirements.

The unit did not power up in tested and we were informed that it was out of order and non-function prior to collecting it.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Fisher Scientific Isotemp Recirculating Chiller Lab Spares/Repairs

ITEM-41106

Fisher Scientific Isotemp Recirculating Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the lab confirmed it was not pumping correctly, and therefore not cooling correctly prior to collection.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Shandon Excelsior Tissue Processor Lab SPares/Repair

ITEM-39981

This Thermo Electron Corporation Shandon Excelsior Tissue Processor was removed from a university lab where it was surplus to requirements.

The unit powered up initially but quickly faded.

It has a suspected PSU fault.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 160 CO2 Laborator Incubator Lab

ITEM-39007

Binder ED23 Drying And Heating Laboratory Oven

This was removed from a university lab where it was surplus to requirements.

The item powers on but the displays "error" after a short whilethat prevents the item from being tested.

It is in very good cosmetic condition.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carbolite CTF 12/100 Tube Furnace Lab Spares/Repairs

ITEM-36639

Carbolite CTF 12/100 Tube Furnace

This was removed from a university lab where it was surplus to requirements.

Although it's in good cosmetic condition, the item is being sold as Spares or Repairs since it does not turn on.

General Laboratory

Filters