General Laboratory

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo Stability Chamber PSC022.AHB.C

ITEM-36816

This was removed from a university lab where ti was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5804 R Centrifuge Lab Spares/Repairs

ITEM-45431

Eppendorf 5804 R Centrifuge Lab

This item was removed from a university where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition. However, it displays "Error 14," indicating an electrical fault, and also has a faulty lid locking mechanism.

Due to both errors listed above, this item is listed as Spares/Repair.

Specifications:

Model: 5804 R
Serial No.: 5805CI964308

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-17AIC Lab Spares/Repairs

ITEM-39947

Sanyo CO2 Incubator MCO-17AIC

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has an issue with CO2 leaking.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab Spares/Repair

ITEM-45126

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

The item powers on and is in a reasonable used cosmetic condition.

It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom.

During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.

Therefore, it is listed as Spares/Repair and no further testing was conducted.

Specifications:

Model: U570 -86
Serial No.: 1004-5204-1103

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator Lab

ITEM-41459

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator

All items are in good cosmetic condition with minimal wear

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VAC HE-63-P PEDATROL GloveBox Lab Spares/Repairs

ITEM-41335

VAC HE-63-P PEDATROL GloveBox Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

The item is missing its back panel, which prevents us from conducting tests due to exposed wires, therefore, it is sold as Spares/Repairs.

Also includes the following:

- Components for the machine

- Tubing

- Pipes

- Automatic Dewpoint Meter

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

ITEM-39828

RMC CR21, CR21 Control, Transformer & Cryochamber Lab

These items were removed from a university where they were surplus to requirement.

All the units are in reasonably good cosmetic condition. However, they cannot be tested as they all require a connection to the transformer, which is not operational.

Therefore, this listing is sold as Spares/Repair.

All items included are as follows:

Model1#: CR21 Controller

Serial1#: 10521389

Model2#: CR21 Transformer Box

Serial2#: 10521391

Model3#: CR21 Cryochamber

Serial3#: 10521390

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr with Dungs Gas Valve Train

ITEM-37792

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

This item was removed from a university lab where it was surplus to requirements.

The burner is in good cosmetic condition. However, the burner control screen has come apart from the control panel and is possibly broken. No testing has been carried out.

Due to the inability of testing and damaged control screen, this item is listed as Spares/Repair.

Specifications:

Model: LPN3/2051
Serial No.: 01333
Manufactured: 11.09.15
Output: 2051 KW/hr (7.0 MBtu/hr)

Includes:

Dungs Gas Train Valve: FRS 5065 gas regulator, VPS 504 leak detector, GF 40065/3 filter
Autoflame Combustion Management System:
Part Nos.: MM10005, MM10004
Serial Nos.: 20368, 051771
TEC Fan Motor:
5.5KW 415 volt
Type: 5.523TECAB35-IE3
T3A 13251-2
Gas Inlet Pipe: 2.5"

£ 500.00 (ex. VAT) 1 in stock

Kryo Planer Biomed 10 Series System Lab Spares/Repairs

ITEM-37143

Kryo Planer Biomed 10 Series System

This system was removed from a university where it was surplus to requirement.

The system failed PAT on insulation. It is sold for spares/repairs.

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 Series Controller:

Model 10-20

1x Kryo 10 series Controller Key

All units listed above power on and are in good cosmetic condition, neither have been tested further at our facility.

1x LNP4 Planer freezer Pump:

Model LNP4 13181

This item is in reasonably good cosmetic condition, but due to it requiring a separate power supply, we are unable to test it at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Astell Hearson MN2950 Autoclave Lab Spares/Repairs

ITEM-20667

This was removed from a university lab where it was surplus to requirements.

It is sold for spares/repairs as the wiring has been deemed unsafe.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heto Maxi Dry Plus VR Maxi Vacuum Centrifuge Lab Spares/Repairs

ITEM-46058

Heto Maxi Dry Plus VR Maxi Vacuum Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonable condition and powers on, however there's a fault with the lock mechanism that prevents the lid from opening.

Therefore, further testing could not be conducted and it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 13 Vintage Microtome Knives With Sharpening strops and Whetstones

ITEM-42018

Job Lot of 13 Vintage Microtome Knives With Sharpening Strops and Whetstones

These items were removed from a university lab, where they were surplus to requirement.

The knife blades are all in very good condition, with sharp and undamaged cutting edges, appearing to have been well maintained, except for the hand knife, which has a poor cutting edge.

The wooden boxes are in excellent condition, except for two that are damaged.

The lot comprises:

3 x Shandon Nothung C wedge shape 20cm blades (circa 1967) in box
1 x Shandon Northung A concave 25cm blade (circa 1967) in box
1 x Unidentified C wedge 18cm blade in box
3 x MSE Ltd No. 9057.W wedge 9cm blades in box
2 x Cambridge Instruments rocking microtome knives (10cm blades) in box
1 x Unidentified wedge 8cm blade in leather case
1 x Hand knife with handle in poor condition in box
4 x Leather sharpening strops (30-35cm long), 2 in box
2 x 15cm whetstones
1 x Acrylic 15cm sharpener
1 x 25cm blade holder
3 x 20cm blade holders
1 x 17cm blade holder

£ 500.00 (ex. VAT) 1 in stock

Sanyo Incubator Model-MIR162 Lab

ITEM-46408

Sanyo Incubator Model-MIR162 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Envair Bio 2+ Plus Class 2 Microbiological Safety Cabinet Lab

ITEM-31185

This Envair Bio 2 Class 2 Microbiological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

The unit powers up and the airflow and light is working. The UV is not working.

Cabinet dimensions - D70 W125 H139cm

Frame dimensions - D61 W122 H83cm

Internal workspace dimensions - D56 W106 H71cm

The item is in a reasonable, used cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

ITEM-46200

Jouan BR4i Refrigerated Centrifuge with S40 Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

Jouan S40 Swing-Out Rotor w/ 4 x Buckets & Inserts.
Max Load: 2kg
Max RPM: 4300

£ 500.00 (ex. VAT) 1 in stock

Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank

ITEM-34584

This Taylor-Wharton LS6000 Liquid Nitrogen Cryogenic Storage Tank was removed from a university lab where it was surplus to requirements.

The unit appears to be in good condition, but it has not been tested.

Last service date: 06/10/2021.

Internal dimensions: 21cm x 60cm.

Capacity: 6 racks, 6000 2ml vials.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer 'Spares/Repair'

ITEM-42303

Thermo Scientific Forma Model Type - 906 ULT Laboratory Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered it displays a persistent "Wrong Power" warning with irregular compressor activity and fails to cool.

Therefore, it is listed as Spares/Repair.

Specifications.

Model: Forma 906
Serial#: 812688-2375
Year: 2009

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Optima L-60 Floor Standing Centrifuge Lab Spares/Repairs

ITEM-42198

Beckman Optima L-60 Floor Standing Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in good cosmetic condition.

However, the display is not functioning correctly, showing only two dots in the TIME-HR-MIN and one dot in TEMP-°C.

Due to these issues, it is listed as Spares/Repair.

There is no rotor included.

Specifications:

Speed: 1,000 - 60,000 rpm
Temperature: 0°C - 40°C

Model: Optima L-60 Serial No.: L1M602

Rotational Counter: 417,132 x 10,000 rotations

£ 500.00 (ex. VAT) 1 in stock

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker Lab

ITEM-46239

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

This item was removed from a laboratory where it was surplus to requirements.

The shaker powers on and operates at the maximum RPM of 400.

It is in poor cosmetic condition.

Model: AK-82

£ 500.00 (ex. VAT) 1 in stock

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

ITEM-46240

Infors AG CH-4103 Bottmingen HT TR-225 AK-82 Shaker

This item was removed from a laboratory where it was surplus to requirements.

The shaker powers on and operates at the maximum RPM of 400. It is in reasonably good cosmetic condition.

Model: AK-82

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

PolyScience 6705 Refrigerated Circulator Spares/Repair

ITEM-46442

PolyScience 6705 Refrigerated Circulator

This item was removed from a facility where it was surplus to requirements.

It powers on and is in good cosmetic condition. However, it does not circulate antifreeze, and the unit failed to reach full cooling performance, only achieving a minimum temperature of 6.0°C.

Internal inspection revealed significant corrosion on the elements.

Due to these faults, this item is listed as spares or repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf 5810R BenchTop Centrifuge Spares/Repair Lab

ITEM-46918

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Additional, although it received a good report in a recent centrifuge service, the client noted that with frequent use the unit overheats and displays error messages related to overloading.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

£ 500.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP 3,700 rpm Rotor

ITEM-46920

Eppendorf A-2-DWP Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It was unable to be tested further.

Specifications:

Maximum speed: 3,700 rpm
Maximum RCF: 2,250 × g
Capacity: Accommodates up to two deepwell plates, microtiter plates, cell culture plates, or filtration plate kits
Compatible with Eppendorf Centrifuge models 5804, 5804 R, 5810, and 5810 R

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator Lab Faulty

ITEM-39911

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The system is faulty and requires a new controller.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Lab Companion IS-971R Shaking Incubator Lab Cooling Fault

ITEM-39716

Lab Companion IS-971R Shaking Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a cooling fault. It is seemingly in otherwise working condition.

It is in good cosmetic condition with minor marks

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Medline Scientific Incubated Shaker Model - IS-971RF Spares/Repairs

ITEM-20411

This Medline Scientific Incubated Shaker Model - IS-971RF was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It was set to 37˚C but only reached 31˚C. The display would keep reverting to 22.2˚C as well. There was a note from the lab stating that it had some heating issues.

Inside dimensions - L89.5 x W63 x D48cm

Platform size - 46 x 76cm

The shaker speed ran up to 160rpm. We tried setting it to the max of 300 but it wouldn't run at that.

Cosmetically it is in a reasonable used condition but all the light tubes work bar one.

It is sold for spares/repairs due to the fault.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

SLS Lab Pro INC8017 Incubator Spares/Repair Lab

ITEM-46085

SLS Lab Pro INC8017 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The incubator powers on but is in poor cosmetic condition, and emits loud noises at higher temperatures, leading to it being turned off for safety reasons.

There are structural issues as well. The wheels are broken, and the doors are misaligned, requiring them to be manually lifted to lock properly.

Due to the issues listed above, this incubator is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs

ITEM-39052

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leica CM3050 S Cryostat Lab Spares/Repairs

ITEM-45369

Leica CM3050 S Cryostat

This item was removed from a university laboratory where it was surplus to requirements.

The cryostat powers on and is in good cosmetic condition. However, it has failed PAT testing due to a cable defect. Therefore, it is listed as Spares/Repair.

The system was also part of a product recall due to improper labelling so can only be used for parts.

It is equipped with multiple varied-sized cutting blades and a foot pedal.

Specifications:

Settable Temperature: -10°C to -50°C (+/-3 K)
Model: CM3050
Serial No.: 3217/07.2002

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Gallenkamp Shaking Incubator Cat no. IOX400.XX2.C Lab

ITEM-39183

This Gallenkamp Shaking Incubator, Cat no. IOX400.XX2. Cr was removed from a university lab where it was surplus to requirements.

The device starts up with the shaking component functioning properly, however, the heating component is not operational. Therefore, it is listed as Spares or Repairs.

It is in reasonably good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

Millipore Elix 5 Water Purification System Lab

ITEM-42932

Millipore Elix 5 Water Purification System

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear. The front disposable filter is missing, and no further testing has been performed.

Includes:

Main unit only (front filter not present)

Model: Elix 5

Serial No.: F9HN95117C

£ 500.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

HasKris Recirculating Chiller S/n HA007835 Lab Spares/Repairs

ITEM-37147

This HasKris Recirculating Chiller S/n HA007835 was removed from a university lab where it was surplus to requirements.

The unit powers up but was not tested further at our facility.

It is in good cosmetic condition, with some marks from use.

Some of the components have been removed, it is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC Lab Spares/Repairs

ITEM-36845

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus to requirements.

The unit powers up but shows the following error.

M26 - LAMP COOLING BLOWER FAILURE.

The manual states:

1. The blower is bad.

2. The blower relay is bad.

3. The airflow switch is bad.

We have been advised that the system is missing some essential parts. These parts are available from the manufacturer.

It is in otherwise good cosmetic condition with minor marks.

It is sold for spares/repairs due to the error.

£ 500.00 (ex. VAT) 1 in stock

Triple Red Duo Organic 60 Ultra Pure Water Purification System Lab

ITEM-45397

Triple Red Duo Organic 60 Ultra Pure Water Purification System

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Included Components:

Avidity Carbon Pre-Filter
P/N: TR-2057
Install Date: 26/7/23
Avidity Cartridge Pack
P/N: TR-2050
Install Date: 26/7/23
Avidity Cartridge Polisher
P/N: TR-2051
Install Date: 26/7/23

Specifications:

Model: Organic 60 Ultra Pure Water Purification System
Serial No.: 0916961-01

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Optima TL Ultracentrifuge w/ Beckman TLA 100.4 Rotor Spares/Repair

ITEM-42968

Beckman Optima TL Ultracentrifuge

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition with minimal wear. However, the unit is non-operational: it does not run programs or operate normally. The door does not open unless the unit is manually stripped down and the door lock pin is pressed.

Additionally, the vacuum chamber does not hold pressure. Error messages displayed include CPU, VAC, and SPD.

Therefore, it is listed as Spares/Repair.

Includes:

Rotor: Beckman TLA 100.4
Maximum Speed: 100,000 RPM
Serial No.: 95U1272

Model: TL

Serial No.: CTL95E13

£ 500.00 (ex. VAT) 1 in stock

Statebourne Bio 36 Nitrogen Dewar

ITEM-45505

Statebourne Bio 36 Nitrogen Dewar

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition. We are unable to test it at our facility.

Includes:

6 x Metal Cylinders

Double walled vacuum vessel.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Systec DB-45 Autoclave Spares/Repair Lab

ITEM-46571

Systec DB-45 Autoclave Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Helmer iLF105-GX Freezer Spares/Repair Lab

ITEM-46454

Helmer iLF105-GX Freezer Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it was set to its minimum temperature of -20ºc and it failed to cool, instead rising in temperature from ambient.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Sanyo Model MDF-U730M Biomedical Freezer Lab

ITEM-44674

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

£ 500.00 (ex. VAT) 1 in stock

Sanyo Type MDF-U730M Biomedical Freezer Lab

ITEM-44675

Sanyo MDF-U730M Biomedical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition.

Includes:

6 x Shelves - 62 x 62cm

14 x Containers - 62 x 31 x 16cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

ITEM-46517

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it did not drop in temperature.

Therefore, it is listed as Spares/Repair.

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 475.00 (ex. VAT) 1 in stock

Elga Model: PURELAB FLEX Water Purification System Lab

ITEM-34576

This was removed from a university lab where it was surplus to requirements.

We were unable to test the unit as it was not supplied with the PSU

Max Pressure: 1.5/22 Inlet.

bar/psi: 1.5/22 Working.

Elga LC197 - Biofilter fitted - Expiry Date 2020-02.

Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.

Specifications;

Model: BB 6220 CUO2
SN: 94109551
Internal dimensions: D56 W65 H66cm
6 Doors with 6 Shelves: 50 x 26cm

General Laboratory

Filters