General Laboratory

£ 350.00 (ex. VAT) 1 in stock

Jouan CR4-22 Benchtop Refrigerated Centrifuge Spares/Repairs

ITEM-45102

Jouan CR4-22 Benchtop Refrigerated Centrifuge With Swinging Bucket Rotor

This item was removed from a university lab where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. The rotor did not reach the maximum RPM of 4750, stalling at 4100 RPM.

It has been temperature tested. (Thermometer not included.)

Due to the inability of reaching its max RPM, this centrifuge is listed as Spares/Repair.

Includes:

Jouan bucket rotor
4 x 85220020 buckets
4 x swinging plates
4 x bucket inserts for 50ml tubes
4 x bucket inserts for 25ml tubes

£ 350.00 (ex. VAT) 1 in stock

Planer Kryosave Compact KS/1.7 & Temperature Gauge Model KS10-230-B-F-H Lab

ITEM-35701

Planer Kryosave Compact KS/1.7 & Temperature Gauge Model KS10-230-B-F-H

Both units are in reasonably good cosmetic condition, but they both have various marks and scrapes.

They both power up and communicate successfully.

The system comprises;

Planer Kryosave Compact KS/1.7

Model: KS/1.7

Serial#: 3215

Planer Kryosave Temperature Gauge Model KS10-230-B-F-H

Model: KS10-230=B-F-H

Serial#: 3221

£ 350.00 (ex. VAT) 1 in stock

Metrohm 837 IC Eluent Degasser Lab

ITEM-41845

Metrohm 837 IC Eluent Degasser Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Also included is the original User's Manual.

£ 350.00 (ex. VAT) 1 in stock

Hettich EBA 30 Bench Centrifuge With Hettich 113 + 8 x 25g Tube Rotor Lab

ITEM-42760

Hettich EBA 30 Bench Centrifuge With Hettich 8 x 25g Tube Rotor

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

Includes;

Hettich 1113 Rotor

Serial No. 000762
Max rpm 5000
8 x 25g Hettich 1122 tube holder buckets

£ 350.00 (ex. VAT) 1 in stock

32 x Cryogenic Carriers L48.5 x W11 x H5 cm Lab

ITEM-46471

32 x Cryogenic Carriers Lab

These items were removed from a facility where they were surplus to requirement.

Each measures: L48.5 x W11 x H5 cm.

All are in good cosmetic condition.

£ POA 1 in stock

LabPlant Refrigerated Immersion Probe Model RP 100 Lab

ITEM-42884

This item is new in stock. Please enquire for further details.

£ 340.00 (ex. VAT) 1 in stock

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab

ITEM-35400

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested. No buckets are supplied.

Maximum RPM: 5650.

Maximum Load: 2 x 500g.

£ 340.00 (ex. VAT) 1 in stock

Taylor-Wharton 35HC Liquid Nitrogen Dewar Lab

ITEM-47239

Taylor-Wharton 35HC Liquid Nitrogen Dewar Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and remains untested.

Included;

6 x Sample Storage Holders.

£ 330.00 (ex. VAT) 1 in stock

LEC+ Model Type ISU1111 Laboratory Medical Freezer -20 Lab

ITEM-46688

LEC+ Model Type ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 330.00 (ex. VAT) 1 in stock

Taylor Wharton CX500 Liquid Nitrogen Dewar Lab

ITEM-37006

Taylor Wharton CX500 Liquid Nitrogen Dewar

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks but has not been tested.

£ 330.00 (ex. VAT) 1 in stock

Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank DewarLab

ITEM-29810

This Statebourne Cryogenics Biorack 2400 Liquid Nitrogen Storage Tank Dewar was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use. There are no rack inserts supplied.

65cm diameter, 69cm w/o wheels, 81cm w/ wheels.

Inner - 11 x 4 x 13cm approx.

Outer - 14 x 14 x 24cm approx.

Wheels - 7.8kg, main unit - 34.8kg. 43.6kg combined.

£ 320.00 (ex. VAT) 1 in stock

LEC+ Type No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46687

LEC+ Type No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 315.00 (ex. VAT) 1 in stock

BECKMAN JA-20 Fixed Angle Rotor Lab

ITEM-41409

BECKMAN JA-20 Fixed Angle Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has not been tested.

Specifications:

Type: JA-20
Serial Number: E.21076
Maximum RPM: 20,000
Capacity: Holds 8 x 50ml tubes
Included: Manual

£ 315.00 (ex. VAT) 1 in stock

Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab

ITEM-35871

Gallenkamp Economy Incubator With Fan Size 1 INA.306.010J Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

£ 310.00 (ex. VAT) 1 in stock

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System Lab

ITEM-38469

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Max Pressure inlet - 0.7/10

Max Pressure Working - 5.5/80

Comes with :

2 X ELGA Labpure S1 - Part No. LC182

2 X ELGA Sanitisation Block - Part No. LA698

1 X UV Filter

1 X ELGA Ultrafiltration Cartridge - Part No. LC151

£ 310.00 (ex. VAT) 1 in stock

LEC+ ISU1111 Medical Freezer Lab

ITEM-46686

LEC+ ISU1111 Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ POA 1 in stock

Thermo Scientific Heraeus Megafuge 40R Laboratory Centrifuge Lab

ITEM-36102

This item is new in stock. Please enquire for further details.

£ POA 1 in stock

Thermo Scientific Benchtop Laboratory Centrifuge Heraeus Megafuge 40R Lab

ITEM-36099

This item is new in stock. Please enquire for further details.

£ 305.00 (ex. VAT) 1 in stock

Glotech GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor Lab

ITEM-23307

This GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor was removed from a university lab where it was surplus to requirements.

The unit powers up and runs smoothly up to 4000rpm.

It is in reasonably good cosmetic condition with some marks from use.

Rotor - GRS-S-50-4

Max rpm 4k

Max rcf 2700xg

4 x GLB-10 Swinging buckets fits 15ml tubes

£ 300.00 (ex. VAT) 1 in stock

Granite Topped Isolation Table - Removed from Zeiss Confocal System Lab

ITEM-45160

Granite Topped Isolation Table - Removed from Zeiss Confocal System Lab

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition. We are unable to test it further at our facility.

It was removed from a LSM510 Confocal System and was made bespoke to fit a Zeiss Axiovert 200M Microscope.

Table-top Dimensions:

72cm L x 54cm W.

£ 300.00 (ex. VAT) 1 in stock

FisherBrand Precision Series FPRS2202 Balance Lab

ITEM-46486

FisherBrand Precision Series FPRS2202 Balance Lab

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition and in good working order. (Calibration weight not included.)

The power supply is included.

£ 300.00 (ex. VAT) 1 in stock

Fisher Scientific DMU12 12L Water Bath Lab

ITEM-41486

Fisher Scientific DMU12 12L WaterBath Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

No lid included.

£ 300.00 (ex. VAT) 1 in stock

LEC+ No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46685

LEC+ No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge Haemo Centrifuge with 1067 Haematocrit Dish Rotor Lab

ITEM-25993

This Haraeus Biofuge Haemo Centrifuge was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks from use. It is in full working order, running up to 13000rpm.

It is fitted with a plate rotor.

£ 300.00 (ex. VAT) 1 in stock

Beckman JA-20 20,000 RPM Centrifuge Rotor Lab

ITEM-26437

This Beckman JA-20 20,000 RPM Centrifuge Rotor was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition but does have marks from use.

It has not been tested and will need to be inspected for safety by a qualified technician before it can be used again.

It fits 20ml sample tubes.

£ 300.00 (ex. VAT) 1 in stock

Heraeus Biofuge 13 Centrifuge Lab

ITEM-37826

This Heraeus Biofuge 13 Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers on and runs smoothly up to 13,000rpm. It is in reasonably good cosmetic condition but is marked from use.

We are unable to test this item further at our facility.

18 sample holders.

£ 300.00 (ex. VAT) 1 in stock

IKA Roller 10 Digital Lab Spares/Repairs

ITEM-36754

This IKA Roller 10 Digital was removed from a university lab where it was surplus to requirements.

The unit powers up with a 24V DC supply (not included).

Error 4 is displayed a few seconds after starting a run - 'Motor blockage or overload'. We followed the troubleshooting part of on online manual, but were unable to clear the error.

It is in otherwise good cosmetic condition with marks from use.

It is sold for spares/repairs.

£ 300.00 (ex. VAT) 1 in stock

Cell Bank Fersht Group Dewar Lab

ITEM-44611

Cell Bank Fersht Group Dewar Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic, but we are unable to test it further at our facility.

Also included:

6 x Container Sample Racks

1 x Skate on Wheels

£ 300.00 (ex. VAT) 1 in stock

Job Lot of Freezer Racking Sanyo/Denleystor

ITEM-44781

Total number needed

£ 300.00 (ex. VAT) 1 in stock

StateBourne Cryolab 25 with Transport Trolley - 25 Litres Lab

ITEM-42910

StateBourne Cryolab 25 with Transport Trolley Lab

This item was removed from a university lab where it was surplus to requirement.

It is good overall cosmetic condition with minimal wear. We are unable to test it at our facility.

Specifications:

LN2 Capacity (litres) 25
Evaporation Rate (litres/day) 0.25
Static holding time (days) 1001
Weight Empty (Kg) 7.4
Weight Full (kg) 27.6
Neck Diameter (mm) 51
Overall Height (mm) 585
Overall Diameter (mm) 395

£ 300.00 (ex. VAT) 1 in stock

Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank Lab

ITEM-29811

This Wessington Cryogenics ES-60 60L Liquid Nitrogen Storage Dewar Tank was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks from use.

Capacity: 60 litre

Build year: 1995

£ 300.00 (ex. VAT) 1 in stock

Millipore Elix Essential 3 Water Purification System Lab

ITEM-46759

Millipore Elix Essential 3 Water Purification System

This system was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 300.00 (ex. VAT) 1 in stock

Pro Scientific PRO 200 Bio Gen Series Homogeniser 35000rpm with Stand

ITEM-42819

Pro Scientific PRO 200 Bio Gen Series Homogeniser with Stand

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Specifications;

Speed Range: 5,000 to 35,000 rpm (115v)
5,000 to 33,000 rpm (220v)
Wattage: 144W Voltage: 120v/ 220v, 50/60hz
Current: 1.2 amps (115v) 0.6 amps (220v)
Sample Volume Range: 0.03ml to 1L
Noise Rating: 68dB
Speed Control: Analog, variable speed, separate on/off switch

£ 300.00 (ex. VAT) 1 in stock

MSE Falcon 6/300 Centrifuge w/ MSE Swing Out Rotor Lab

ITEM-36610

MSE Falcon 6/300 Centrifuge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on and runs well with he fitted rotor, though we are told it will not go higher than 3000, even with a higher rated rotor.

This item also includes the following:

1 x Mistral MSE Rotor - 43124

Capacity: 4 x 750ml
SN: 986766
Max RPM: 2500
(There are no rotor buckets included)

£ 295.00 (ex. VAT) 1 in stock

Memmert WNE 10 Water Bath 10L Lab

ITEM-35873

Memmert WNE-10 Water Bath 10L

This was removed from a university lab where it was surplus to requirements.

The unit is in full working order. it has been tested against a digital thermometer (not included).

It is in reasonable cosmetic condition but is very stained inside.

£ 295.00 (ex. VAT) 1 in stock

Protex Model/Type - VB FH Ventilated Workstation Lab

ITEM-31713

Protex Ventilated Workstation Model/Type - VB FH

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with minor marks from use.

It has not been tested as it needs a power cable wired up.

Workstation surface - 140 x 70cm

Cabinet dimensions L95 W55 H54

Internal - D49.5 W94 H53

£ 290.00 (ex. VAT) 1 in stock

LEC+ ISU1111 Laboratory Medical Freezer Lab

ITEM-46682

LEC+ ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 285.00 (ex. VAT) 1 in stock

LEC+ Model ISU1111 Laboratory Medical Freezer Lab

ITEM-46683

LEC+ Model ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

NEW ITEM

£ 285.00 (ex. VAT) 1 in stock

Elga UHQ-PACKA Replacement Purification Pack for PURELAB UHQ Systems

ITEM-39679

Elga UHQ-PACKA Replacement Purification Pack for PURELAB UHQ Systems

This was removed from a university lab where it was surplus to requirements.

The unit is brand new an unused.

The box contains the following;

Organic Adsorption Cartridge x2

Part#: UHQ-1

Ion Exchange Cartridge x2

Part# UHQ-2

£ 280.00 (ex. VAT) 1 in stock

LEC+ Model No. ISU111S Medical Freezer Laboratory

ITEM-46680

LEC+ Model No. SU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 270.00 (ex. VAT) 1 in stock

Eppendorf 5417C Benchtop Centrifuge with Aerosoltight GE 035 11/01 Rotor Lab

ITEM-30269

This Eppendorf 5417C Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and runs up to 20,800rpm but is a little loud at max speed.

It is in reasonably good cosmetic condition but has a small crack on the bottom left of the unit.

It is fitted with an Eppendorf Aerosoltight GE 035 11/01 Rotor which holds 30 x 2ml tubes

£ 270.00 (ex. VAT) 1 in stock

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46679

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 270.00 (ex. VAT) 1 in stock

J. Bibby Water Still Model W14S Lab

ITEM-38416

J. Bibby Water Still Model W14S

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Serial No. W14S 85/1168

£ 260.00 (ex. VAT) 1 in stock

Electrothermal Slide Drying Bench MH6616 Lab

ITEM-45541

Electrothermal Slide Drying Bench MH6616 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

£ 255.00 (ex. VAT) 1 in stock

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

ITEM-46672

LEC+ Model No. ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 250.00 (ex. VAT) 1 in stock

LEC LSFSR158UK Medical Laboratory Refrigerator Lab

ITEM-46999

LEC LSFSR158UK Medical Laboratory Refrigerator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 250.00 (ex. VAT) 1 in stock

LEC Model no. LSFSR158UK Under-Counter Laboratory Refrigerator Lab

ITEM-46675

LEC Model no. LSFSR158UK Under-Counter Laboratory Refrigerator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 250.00 (ex. VAT) 1 in stock

LEC+ Type ISU1111 Laboratory Medical Freezer Lab

ITEM-46671

LEC+ ISU1111 Laboratory Medical Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 250.00 (ex. VAT) 1 in stock

SLS Lab Pro FZ-2000i EC Balance Scales With AnD Multi-Printer Lab

ITEM-47005

SIS Lab Pro SZ-2000i Balance Scales With AnD Multi-Printer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in goods working order. (Calibration weights not included.)

The AnD multi-printer has also been tested and is fully operational, with successful test prints confirmed directly from the balance.

£ 250.00 (ex. VAT) 1 in stock

AnD Weighing FZ-2000i Precision Balance With AnD Multi-Printer

ITEM-46487

AnD Weighing FZ-2000i Precision Balance With AnD Multi-Printer

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic and in good working order. (Calibration weights not included.)

The AnD multi-printer has also been tested and is fully operational, with successful test prints confirmed directly from the balance.

General Laboratory

Filters