This BioAir S@feFlow Safeflow 1.2 Class II Microbiological Safety Cabinet & Stand was removed from a university laboratory during a clearout.

Unit is in good, used cosmetic condition, and powers up, but it fails the startup tests and keeps looping around. It has not been tested further. It will need inspecting for safety before it is used again.

Internal dimensions are: 113cm L x 40cm W x 65cm H.

It comes with the stand, control box module, and some ducting parts.

Unit is sold as spares / repairs.

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.

A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.

This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected. Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.

The filter was removed during decontamination, and the unit is generally in good condition.



Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.

A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure. This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.

Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.

The filter was removed during decontamination, and the unit is generally in good condition.

Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.

A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.

This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.

Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.

The filter was removed during decontamination, and the unit is generally in good condition.

Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

The filter was removed during decontamination and the top section of the extraction system is broke. Overall in moderate to poor condition.

This CAS Contained Air Solutions Bio-Class 1 Safety Cabinet and Stand was removed from a laboratory where it was surplus to requirements.

Model: Class1Tripass.

The unit is in very good cosmetic condition. It looks like the unit had never been used. Though it does have various storage marks and one wire has been cut.

The unit powers up, the alarm sounds, and some of the LEDs light up, though we could not get anything else to work. Not even the light would work, and we assume this is possibly due to the cut cable.

Internal dimensions:

110cm L x 60cm W x 70cm H.

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.

A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.

This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.

Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.

The filter was removed during decontamination, and the unit is generally in good condition.

Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

Internal Dimensions:

148cm W x 65cm D x 62cm H.

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.

A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.

This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.

Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.

The filter was removed during decontamination, and the unit is generally in good condition.

Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

Internal Dimensions:

148cm W x 65cm D x 62cm H.

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.

A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.

This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.

Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.

The filter was removed during decontamination, and the unit is generally in good condition.

Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

Internal Dimensions:

148cm W x 65cm D x 62cm H.

This Microflow Biological Safety Cabinet was removed from a laboratory where it was surplus to requirements.

In total, we received 15 cabinets from this lab - the whole facility was an operating research lab but was cleared quickly to create a new COVID testing facility. All cabinets were believed to be in good working order prior to decomissioning.

A 13amp plug was fitted for testing. The unit powers on and the lights work. The fans however will not run and an alarm sounds. They may be powered by one of the other cut cables, but we cannot say for sure.

This is the same with all of the other Class 1 cabinets we received from this site so we inspect it just needs to be setup properly or a cable reconnected.

Alternatively it might be a dead battery - since on the class 2 cabinets we got from this site they had the same issue but all displayed 'Battery Fail'.

The filter was removed during decontamination, and the unit is generally in good condition.

Please note the unit must be safety tested and/or certified prior to use depending on your work requirements.

Internal Dimensions:

148cm W x 65cm D x 62cm H.

Thermo Electron Microbiological Safety Cabinet Class II Holten LaminAir Model 82074332

The unit powers on, the fans are working and the light works, electronic window going up and down is working. Nothing happened when we pressed the UV Light button. Unit was in good working order when last validated/inspected. It will require validation / certification depending on your work requirements.

The item is in good, used, cosmetic condition.

Dimensions without base:-

Height - 133cm

Width - 134cm

Depth - 85cm

Inside dimensions -

Height -72cm

Width - 120cm

Depth - 58cm

Base Dimensions -

Height - 137cm

Depth - 80cm

Inventory weight 305kg