Formulatrix Rock Imager 1000 with Double Stacked Cooling System

This item was removed from a laboratory where it was surplus to requirements.

Due to limitations with testing Class 3+ lasers at our facility, we were unable to carry out functionality tests on the main Rock Imager unit. Therefore, the RI-1000 has not been powered on or PAT tested.

However, the previous owner stated the system was in working order prior to removal.

Both chiller units have been powered on and have passed PAT testing.

Please note: The main RI-1000 unit appears to require adjustment or repair, as the inner chamber is off-centre when compared to another unit from the same project (50334).

No further testing has been carried out.

Included:

• Formulatrix Rock Imager 1000 (S/N: 223)
• 2 x Formulatrix Chiller Units (S/N: 152 & 153)
• 1 x Chiller Stand
• 1 x Lid/Cover
• Several fixings for all units

PerkinElmer Flexar LC Autosampler

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on. No further testing has been conducted.

Includes:

• PerkinElmer Flexar LC Autosampler main unit
• CD containing software and documentation for a PerkinElmer Flexar and Series 225/275 Autosampler.

Faster SafeFAST Elite Class 2 Biosafety Cabinet Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Sigma 4-16KS Benchtop Centrifuge Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Includes;

• Sigma 09100 Rotor

Fluidigm BioMark System with MX & HX Modules w/ PC & Software Lab

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in good used cosmetic condition. All included software boots up correctly.

The BioMark tray opens and closes via the Data Collection software, and the lamp switches on and off as expected. The lamp currently installed shows 0 hours used out of 1000 and may have been replaced during a reported service in 2024.

Both the HX and MX controllers power up and appear to connect to the BioMark via Ethernet.

Power on sequence: Switch on PC before main unit; use front switch before back

Log-in information available on request.

Includes:

• Fluidigm BioMark System
• Fluidigm BioMark IFC Controller HX
• Fluidigm BioMark IFC Controller MX
• Monitor, keyboard, and mouse
• 2 x used lamps (one marked 3700 hours; one unmarked)

Installed Software:

• BioMark Data Collection 4.7.1
• Fluidigm Digital PCR Analysis 4.1.2
• Fluidigm Melting Curve Analysis 4.1.3
• Fluidigm Real-Time PCR Analysis 4.7.1
• Fluidigm SNP Genotyping Analysis 4.5.1

ABB Extrel Mass Spectrometer w/ Pumps, Chiller & Various Parts

This was removed from a university lab where it was surplus to requirements.

All units have been powered up unless specified. It is in reasonably good cosmetic condition with minor marks.

Molecular Beam System:

TPU 240 Pfeiffer Balzers PM P01 620 Turbomolecular Pump

Model: TPU 240

Serial#: 12087358

Item is in good cosmetic condition.

Unable to test.

Edwards Active Pirani Gauge

Model: APG-M-NW16

Serial#: 006737606

Untested

Pfeiffer Vacuum TMH 520

Model: TMH 520 IS

Serial#: 12392520

Untested

Edwards E2M 28 Vacuum Pump

Model: E2M 28

Serial#: 100203

44kg

Mass Spectrometry Stack on frame consists of:

Extrel Core Mass Spectrometers

Model: Merlin QMS Controller

Serial#: 28934

ABB Extrel Quadrupole Mass Spectrometry

Model: 150-QC Quadrouple Power Supply

Serial#: 24512

ABB Extrel Quadrupole Mass Spectrometry

Model: QMS DC Power Supply

Serial#: 23678

Edwards Active Gauge Controller

Model: Active Gauge Controller

Serial#: D38655000

Extrel Quadruple Mass Spectrometry Fan

Model: N/A

Serial#: 24561

Untested.

Pfeiffer Vacuum TCP 380 X 2

Model: TCP 380

Serial#: 7019428

MKS Baratron Power Supply and DPM

Model: N/A

Serial#: N/A

Additional Parts:

Edwards 18 E1M18 Rotary Vane Vacuum Pump

Model: E1M18

Serial#: 006727358

35kg

Edwards 2 E2M2 Rotary Vane Vacuum Pump

Model: E2M2

Serial#: 05035

30kg

Particle Measuring System Inc Condensation Particle Counter

Model: 761003

Serial#: 816

Date: Feb 1996

Pfeiffer Vacuum TCP 380

Model: TCP 380

Serial#: 7019428

Pfeiffer Blazers TCP 120

Model: TCP 120 A

Serial#: S4758

Horiba Triax Series 180 triple grating spectrometer

Model: Triax 180

Serial#: 0109-02-97

EMS Microtron 200 Microwave Power Generator Mark 3

Model: Microtron 200

Serial#: 111272

Julaba FE500 Compact recirculating cooler

Model: FE500 GB

Serial#: 9610050 4

Perkin Elmer Chemagic 360 Magnetic Separator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition.

Due to the absence of a monitor or computer, further functional testing could not be conducted.

Includes:

• Manual
• Cables
• Plastic bottles

Illumina MiSeq Benchtop Gene Sequencing System Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks from use.

Operating Conditions: 19°C to 25°C (66°F to 77°F).

The system also includes:

1 x Logitech Wireless Keyboard & Mouse.

8 x Used MiSeq Flow Cells in containers.

1 x 96 Well Plate.

1 x Spare FSE Fluidics Kit 15013841S.

7 x HiSeq Flowcell Gaskets 15011631.

1 x Ultra-Low Universal Lid.

1 x Illumina GenomeStudio v1.7 Software disc.

Perkin Elmer Clarus 500 Gas Chromatograph Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Thermo Scientific Revco UxF UXF50086D ULT Ultra-Low Temperature Freezer

This item is sold on behalf of a client. It is surplus to requirements.

This freezer is in complete working order, having been given the all clear by a service engineer on 14/02/2025.

The client sated, they are able to arrange crating and packaging.

This item is sold on behalf of a client and falls outside our normal terms and conditions. It is non-returnable and non-refundable.

Jenway 6705 UV/Vis. Spectrophotometer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition other than some stress cracks present on the screen protector. This does not impair its functionality.

This item powers on and passes all self-diagnostic tests on start-up. The previous client stated it was in good working order prior to removal.

Illumina MiSeq Benchtop Gene Sequencer Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in working order.

The previous owner has stated it was in working order prior to removal.

Software installed: MiSeq Control Software 4.1.0.656

Redd & Whyte Preddator Liquid Robotic Handler

This system was removed from a facility where it was surplus to requirements.

It is in excellent cosmetic condition. No further testing has been carried out, however, the previous owner confirmed it was working when last used.

Please note; Laptop and software are not included.

Includes:

• Redd & Whyte Preddator Liquid Robotic Handler
• 1 x Data cable
• 1 x 1.5 metre plastic tubing

Serial No.: 1040

Model No.: [Not specified]

10x Genomics Chromium Controller for Single Cell Assays

This is being sold on behalf of a university client.

It is in good working order and is in good cosmetic condition with minor marks. The client simply upgraded to a newer unit.

The unit is available for collection from Cambridge.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Shimadzu GC-2014 Gas Chromatograph with LabSolutions GCsolution Software

This system was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition and powers on. The previous owner advised that it was in working order prior to removal.

It is fitted with 2 × FID detectors, gas sampling valves, and a packed column adapter.

Software Included:

LabSolutions GCsolution

Release: 2.31

Model: GCsolution

Cat No: 223-07370

S/N: C51744600344

• Model: GC-2014

Shimadzu GC-2014 Gas Chromatograph

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, but there is no software included.

Therefore, we are unable to conduct further testing.

The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software.

Includes:

• Manual
• Users manual on disc
• LabSolutions GC Solution release 2.30

Specifications:

• Model: GC-2014
• Serial No.: C11484301470

Shimadzu GC-2014 Gas Chromatograph

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, but there is no software included.

Therefore, we are unable to conduct further testing.

The lab confirmed it was in working order prior to removal, but were unable to provide the PCs and Software.

Includes:

• GC-2014 Gas Chromatograph User’s Manual
• Needles
• Operation Manual
• SGE Inlet Liners
• Restek Septa
• Hamilton Syringe

Specifications:

• Model: GC-2014
• Serial No.: C11484301470

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab

This system was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on.

The previous owner has notified us that this system is in full working order.

This system includes the following:

• Pharmacia LKB VacuGene Pump
• ProXPRESS 2D User's Guide
• ProXpress Test Sheets
• 2950-2017 Gell Cassette Assy
• 2950-2019 UV Gel Adaptor (Sealed)
• 2950-2048 Calibration Sample Assy
• PX2950-2006
• 2950-2049 Standard Wet Gel Cassette Assy
• Phoretix Software
• Proteome 1D Analyser Software and manual

Rigaku X-ray Diffractometer (XRD) Ultima III

This system was removed from a university lab where it was surplus to requirements.

The system is in reasonable used cosmetic condition. It has not been powered on at our site due to our on-site risk assessments surrounded X-Rays.

The unit was working when put into storage in 2018.

Various components and parts are included as listed below, along with a PC setup, although no Rigaku software programs appear to be installed on the PC.

However, there are the following software disks included:

• Rigaku Basic Software (Cat No.: 9240J101)
• Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
• Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

System Specifications:

• Model: Ultima III
• Cat No.: 2035M410
• Serial No.: DD3654N

• 6 Station Holder
• Model: SA-HEM3
• Cat No.: 4057J101
• Serial No.: 00563702

• Patlite Beacon
• Model: LMS-L (SN-06X03M)

• Rigaku DC Motor Controller
• SN: DD12866

• Rigaku Long Fine Focus
• Type: R01-29-0202
• NC: 9430 022 73201
• No. DK 402688

• Rigaku CBO Cross Beam Optics
• Cat No.: 2220B101
• SN: DD12793

• Additional Rigaku parts:

• Cat No.: 5738E402 (SN-DD061813)
• Cat No.: 2155G101 (SN-DD12804)
• Cat No.: 4601K831 (SN-DD12154)
• Cat No.: 4253A101 (SN-DD11586

• Vexta Stopping Motor
• Model: PK543-A
• SN: UR70J32307

PC Setup:

• Dell Optiplex 9020 with monitor, keyboard, and mouse
• The PC is in working order with all passwords cleared. It contains a few Rigaku files, but no software programs appear to be installed.

Included Manuals/Software:

• 2 x Rigaku D/MAX 2000/PC Series Instruction Manual
• X-Ray Diffractometer Instruction Manual
• Rigaku Basic Software (Cat No.: 9240J101)
• Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
• Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

Loose spare parts included:

• Rigaku Cat No.: 2701E201 (SN-AD08851)
• Container of round parts: Rigaku 900003 SH, w/Groove
• 2 x Small containers with unknown parts
• Scintag Generator Key
• Key labeled: "Microscope"
• Container of small metals, including:
• 1 x Bag labeled "Silicon"
• 1 x 640d Silicon Powder
• 2 x Tubs UCAR Spectroscopic Powder
• 1 x Tub labeled "Tung Flake"
• Approximately 20 x small containers of Silicon metal

Waters Alliance HPLC System 2695 Separations Module, 1515 IP, 2487 Dual

This system was removed from a facility where it was surplus to requirements.

All components are in good cosmetic condition with typical signs of previous laboratory use. The system powers on, however we are unable to test it further at our facility.

System Components

• Waters 2695 Separations Module
• Model: WAT270886
• Serial Number: H07SM7214A

• Waters 1515 Isocratic HPLC Pump
• Model: 186001515
• Serial Number: J0515P 230M

• Waters 2487 Dual λ Absorbance Detector
• Model: WAT081110
• Serial Number: L05487 056M

• Waters TC2 Temperature Control Module II
• Serial Number: H05TC2 656E

Gilden Photonics fluoroSENS Fluorimeter w/ Sens-J1 Microplate Reader Lab

This system was removed from a university lab where it was surplus to requirement.

Both units are in good cosmetic condition, the FluoroSENS Gilden Photonics powers on, we are unable to test it further at our facility.

The Sens-J1 has not been tested, as it requires connecting to a PC with relevant software.

This system also includes the required manual/

Thermo Scientific Easy-Nano LC 1000 UHPLC Chromatography

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note; It is missing the side access panel.

Includes;

• Thermo Scientific Easy Spray - Mfc.date: 2012
• P/N: ES081

• 8 x Nano vip-er boxes with varying cables/wires/adapters.
• 1 x Viper cap
• 1 x Acclaim PepMap RSLC
• 1 x 350 microLitre mixer kit
• 1 x large box containing various accesseries.

Synentec NyOne Cell Imager Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, unable to test further as it requires connection directly to a PC to operate.

The lab confirmed it was in good working order prior to removal.

BIOQUELL Clarus L2 Vaporised Hydrogen Peroxide Mobile Sterilising Unit Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The previous owner stated it was in working order prior to removal.

Tuttnauer 5050ELV-D Floor-Standing Autoclave

This item was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition with typical signs of previous laboratory use. It powers on, however we are unable to test the system further at our facility.

An engineer tested the unit before it was removed and believes it is in good working order.

To service and operate the system, the following utilities are required:

• Compressed air supply
• Mains water supply
• Softened water supply

Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

New Brunswick Scientific Ultra Low Temperature Freezer -80C Model C760-86 Lab

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and in good working order.

Biotage TurboVap II Sample Evaporator & 10x 200ml Biotage Tubes Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Agilent 6850 Network GC System w/ 6850 Series Auto Sampler Chromatography

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Dilor XY-800 Double Monochromator Spectrometer w/ Nitrogen Cooled CCD Detector

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

System includes:

• Dilor Main unit XY-800
• ISA Spectrum One S/N E68
• Olympus BH-2 Microscope.  (2 objectives MDPlan 5 0.10 & MDPlan 50 0.75)
• Dilor Control Box S/N XY 151.
• ISA SpectrumOne CCD-2000 S/N 0848B
• Schott KL1500 Light source
• Dilor Control Rack
• Shibaden Video Monitor S/N 010489
• Siemens Xpert PC S/N YAQU595166
• ViewSonic VA703M-4 VS11366 S/N QAP072182977
• UniPhase Helium Neon Gas Laser 1508-0 S/N 527188) (The power supply is broken but still supplied to provide information on Voltage, amps and polarity. 12V 550mA Centre+
• Various cables and manuals

Affymetrix GeneChip Scanner 3000 System with 4 x Affymetrix Fluidics Station 450

This system was removed from a university laboratory where it was surplus to requirements.

The system was fully connected, and the scanner successfully communicated with the PC. All Affymetrix Fluidics Station 450 units were tested by running various test programs, which they all passed. Based on the available testing, the system appears to be working as it should.

Software installed on PC:

• Affymetrix Launcher
• Expression Console – Build 1.4.1.41
• Transcriptome Analysis Console – Version 3.1.0.5
• Affymetrix GeneChip Command Console Viewer – Version 4.1.2.1567
• Affymetrix GeneChip Command Console Scan Control – 4.0.0.1567
• Affymetrix GeneChip Command Console Fluidics Control – 4.0.0.1567

The system comprises the following:

• Affymetrix GeneChip Scanner 3000 7G with AutoLoader
• Model: AutoLoader
• Serial No.: A17990
• Part No.: 90-0351
• Condition: Powers on; great condition with minimal wear.
• Affymetrix GeneChip Scanner 3000 7G
• Serial No.: 54726240
• Part No.: 54726240
• 2 x Affymetrix Fluidics Station 450
• Model: GeneChip Fluidics Station 450
• Serial Nos.: 60102840, 60132140
• Part No.: 00-0079
• 2 x Affymetrix Fluidics Station 450
• Serial Nos.: FS1451, 60102960
• Part No.: 00-0079RS

Accessories included:

• User manuals for Expression Console Software 1.4 and Affymetrix GeneChip Command Console (AGCC) 4.0
• Symbol DS9808 scanner with stand, manuals, and software (new and unopened)
• Spare parts for one Affymetrix Fluidics Station 450, marked with “The Valve Removed Motor good etc” on a red tag

DakoCytomation CyAn ADP Flow Cytometer with Fluids Cart & PC

This system was removed from a university laboratory where it was surplus to requirements.

The main unit has not been powered on due to safety limitations at our facility with powering on Class III lasers.

However, the accompanying PC, fluids cart, and all listed peripherals power on without issue. The system remains in good cosmetic condition.

The previous owner has stated it was in working order prior to decommissioning.

Includes:

• DakoCytomation CyAn ADP Flow Cytometer
• Fluids cart/sheath management system
• PC w/ Summit V4 Software
• Samsung monitor
• Keyboard
• Mouse
• 1x Powervar ABCE800-22 Power Supply Unit

Cytiva Biacore X100 Surface Plasmon Resonance (SPR) System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it requires a service and a needle replacement.

PerkinElmer Clarus 480 GC Gas Chromatograph

This item was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further. The unit is in reasonably good cosmetic condition.

Includes:

• Main Clarus 480 unit only (no additional accessories or software included)

DYNO-MILL Type KDL Bead Mill

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and appears to be in working condition. The unit is in a reasonable, used cosmetic condition.

Includes:

• User manual

HPC Laser Model: RC2412 Laserscript Table Router Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order.

This item also includes:

1 x Control Panel.

1 x MPC6620 controller.

1 x MPC6620 User Manual. (V1.0) July 2013.

Item Dimensions:

L 300 cm x W 170 cm x H 137 cm.

Weight: 356 kg

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

These Competition Basketball Goals are sold on behalf of a University in Scotland.

The previous client has notified us that these items are in very good condition with little use.

This mobile basketball system features two mobile and two stationary wheels that retract or extend when the unit is lifted or lowered. It includes a 15 cm thick shield covered with synthetic, washable material and tempered safety glass boards with protected lower edges.

The complete system weighs approximately 1050 kg and includes:

• Two tempered safety glass boards (180x105 cm, 12 mm thick) with edge covers
• Two basketball rings with nets
• Rear plates for anchoring to the floor

Specifications:

• Projection: 325 cm
• Required setting length: 425 cm
• Dimensions when folded: 410x185x170 cm

The system complies with FIBA standards (Level 1).

This item will require collection from: UHI Perth, located in Perth, Scotland.

These can either be sold as a pair or individually.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

The vehicle is a non-runner and has been parked up for the last 24 months. It has been converted into a food truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

• Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

• Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Pizza oven dimensions are:

Opening is 53cm x Internal Width is 100cm x Depth is 120cm x Opening Height is 26cm.

The water urn wiring has been disconnected from the unit, as has the water bath.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Lochmaben UK

Gilson Pipettes – 42 Units (6 Stands of 7) Adjustable Volume P2–P5000

This equipment is being offered for sale on behalf of a client due to being surplus to requirements.

This lot consists of 42 Gilson adjustable-volume, single-channel pipettes supplied across 6 complete stands (7 pipettes per stand). The set covers a full range of commonly used volumes including P2, P10, P20, P100, P200, P1000, and P5000, making it suitable for a wide range of laboratory applications including molecular biology, chemistry, and general lab workflows.

Gilson pipettes are widely regarded for their precision, durability, and reproducibility, making them a standard choice in research, clinical, and industrial laboratory environments.

According to the client, all pipettes are in good used condition and have been well maintained. Please note that the pipettes are not currently calibrated, and buyers should factor calibration into commissioning prior to use where required.

Included in sale:

• 42 × Gilson single-channel pipettes
• Volume ranges included: P2, P10, P20, P100, P200, P1000, P5000

• 6 × pipette stands (each holding 7 pipettes)

Please note, any additional accessories, services or documentation not specifically listed above are not included.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Millipore Mobius FlexReady System CL-2 POD - MPODPILOT - MBSCB002D

This was removed from a university lab where it was surplus to requirements.

Millipore Mobius FlexReady System CL-2 POD Cart with Drawer

Model: MPODPILOT

Cat#: MBSCB002D

Serial#: F4DA03789

Year: 2014

The unit is in excellent cosmetic condition but has not been tested.

CAMAG Automatic TLC Sampler 4 with PC and winCATS Software Lab

This system was removed from a facility where it was surplus to requirement.

Perkin Elmer AAnalyst 200 Atomic Absorption Spectrometer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Bigneat Robotics Enclosure Cabinet RB3200/01

This item was removed from a university laboratory where it was surplus to requirements.

It is in very good cosmetic condition and in good working order.

Please Note; This item will require reassembling and recommissioning once purchased.

Includes:

• LAC2 Class II type airflow system
• Integrated Ergotron PC and monitor arm
• Eight fitted castors for mobility
• Two lower storage compartments (110 x 100 x 57cm each)
• Opening window aperture (218 x 110cm) for equipment access

Specifications:

• Airflow: > 0.4m/s
• Downflow air changes per hour: 0.25 - 0.5
• External dimensions: 320 x 118 x 240cm (l x w x h)
• Internal cabinet dimensions: 317 x 115 x 115cm (l x w x h)
• Running hours since last service: 134.1

Model: RB3200/01

Serial No.: 66166/RB3200

Year: 2007

Wild Leitz GMBH Fluovert FU 090-128.017 Inverted Microscope w/ 2 x Objectives Ph

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in reasonable cosmetic condition, with a crack at the bottom of the unit.

It could not be fully tested as the power supply required for the lamp was not included.

Includes:

• Leitz EF L 20/0.32 PHACO1 160/- objective (519436)
• Leitz EF 10/0.25 PHACO1 160/- objective (519767)
• Leitz 2 × Periplan GF 10x/18 M eyepieces
• Carl Zeiss S-PL 10x/20 eyepiece

Model: FU 090-128.017

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

Esco Labor Model EL3 Dual Agitated Vacuum Laboratory One-Pot Homogeniser

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition. The unit cannot be powered on as the control panel is not included, and it has not been PAT tested for this reason. The previous owner stated that it was in working order prior to removal.

Model: EL3