All Products

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

ITEM-46579

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. The casing is loose and required securing with a screw, suggesting it may have been opened previously.

The item powers on, but no further testing has been conducted. The previous owner reported it as non-functional, though the specific fault is unknown.

Therefore, it is listed as Spares/Repair.

Includes:

Pipe fittings
Grey connector box for the pipe system

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

ProteinSimple FluorChem E Imaging System Spares/Repair Lab

ITEM-46915

ProteinSimple FluorChem E Imaging System

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition. It powers on with "ProteinSimple" background and functional touchscreen/mouse.

Additionally, it emits an unhealthy noise when powered and the UV transilluminator does not appear to activate,

Therefore, it is listed as Spares/Repair

The previous owner stated the following: UV gel scanner, "lights half of the gel" and may need attention.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Allegra X-22R Benchtop Centrifuge Spares/Repair Lab

ITEM-47198

Beckman Allegra X-22R Benchtop Centrifuge – Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in good cosmetic condition. However, it has been identified as having a faulty fan, compromised vibration dampers, and issues with motor suspension.

Therefore, this item is being sold strictly as Spares/Repair.

Includes:

Beckman Allegra X-22R unit only (no rotor or accessories included)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Physica MCR 301 Anton Paar Modular Compact Rheometer Spares/Repair

ITEM-47201

Physica MCR 301 Anton Paar Modular Compact Rheometer Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition, however, it does not power on due to a suspected motherboard fault.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Julabo FL300 Recirculating Chiller - Spares/Repair Lab

ITEM-47581

Julabo FL300 Recirculating Chiller – Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

The unit shows minimal wear, with both of the top catches on the lid broken; this does not affect physical operation of the doors.

The cable is damaged, and the unit will not power on, so it is being sold for spares or repair.

Model: FL300

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

ITEM-47640

Parker Dominick Hunter LCMS30-1 Nitrogen Gas Generator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the display screen does not power on.

Therefore, it is listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

8 × Hounsfield Tensometer Type W Tensile Machines

ITEM-47708

8 × Hounsfield Tensometer Type W Tensile Machines

These items were removed from a university where they were surplus to requirements.

They are in good cosmetic condition and in good mechanical order.

The previous owner reported that they were mechanically operational but experienced issues with upgraded electronics.

Originally, they were designed as fully mechanical systems.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

PicoTrace Control Enclosure with Bentrup TC805 and Siemens Micromaster

ITEM-47767

PicoTrace Control Enclosure with Bentrup TC805 and Siemens Micromaster

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in poor condition with visible wear and missing components, including three rails that secure the doors, one large door, and the top lid that covers the electrics and fan. Due to the missing lid, the item has not been powered on for safety reasons.

Therefore, it is listed as Spares/Repair.

According to the previous owner, the unit was reported to be in working order before being moved from the lab but requires replacement of two or three small plastic pins that secure the panel seams, which cracked during transit.

Included internal components:

Bentrup TC805-X-3 (Model: TC805-X-3, Serial No.: 024546)
Bentrup TC805-X-3-PT100 (Model: TC805-X-3-PT100, Serial No.: 027021)
Siemens Micromaster (Model: Micromaster, Serial No.: XAK221MM326B)
Schmersal 3JB (Model: 3JB, Serial No.: N/A)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Cytiva F9-T AF Fraction Collector - Spares/Repair Lab

ITEM-48713

Cytiva F9-T AF Fraction Collector - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however it has a faulty drive motor.

It is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Aviso TheOnyx Liquid Handling System - Spares/Repair Lab

ITEM-48824

Aviso TheOnyx Liquid Handling System – Spares/Repair Lab

This system was removed from a university where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition. However, the previous owner reported that it is faulty, though no further details were provided.

It is therefore listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

Aimsizer AS-100 Density Tester Lab

ITEM-48839

Aimsizer AS-100 Density Tester Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with some surface rust visible.

It powers on, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Leybold TurboTronik NT 151/361 Pump Controller Lab

ITEM-49037

Leybold TurboTronik NT 151/361 Pump Controller Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

19 x Vickers Binocular, 4 x Vickers Monocular 1 x Watson Barnet Microscope Lot

ITEM-49329

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Essen BioScience IncuCyte Zoom Live Cell Analysis System Spares/Repairs

ITEM-49714

Essen BioScience IncuCyte Zoom Live Cell Analysis System – Spares/Repairs

This system was removed from a facility where it was surplus to requirements.

Items have been identified by the previous owner as Spares or Repairs / For Parts Only.

The system powers on, but no further testing has been performed.

The IncuCyte Zoom Cell Analyser is in poor cosmetic condition.

The Controller is in slightly better overall cosmetic condition.

The controller includes a locking mechanism, but no keys were provided (the unit is currently unlocked).

The analyser units include the following microplate holder arrangements:

IncuCyte Zoom Analyser S/N 45638 contains 3 microplate holders
IncuCyte Zoom Analyser S/N 45358 contains 2 microplate holders (one holder missing)

£ 500.00 (ex. VAT) 1 in stock

Stuart SBS40 Shaking Water Bath Lab

ITEM-50253

Stuart SBS40 Shaking Water Bath Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Ion Bench Laboratory Bench 135x120x60 LxWxH cm Lab

ITEM-50610

Ion Bench Laboratory Bench 135x120x60 LxWxH cm Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Weight: 120kg

Dimensions: Lx134 Wx120 Hx60 cm

£ 500.00 (ex. VAT) 14 in stock

Medium Lasermet Heavy Duty Laser Blocking Screen 124x65x199 cm

ITEM-43133

Lasermet Heavy Duty Laser Blocking Screen – Good Condition

This item was removed from a university laboratory as surplus to requirements.

The unit is mostly in good cosmetic condition with minimal wear; however, some panels show minor dents and scratches consistent with previous use.

Suitable for all laser wavelengths.

The screen is labelled with the following irradiated area performance levels:

Irradiated Area PEL (T3) 10s PEL (T2) 100s
4 mm² 61MW/m² 34MW/m²
2000 mm² 2.7MW/m² 1.5MW/m²

Model: Laser Blocking Screen

Please note: As multiple units are available, the item you receive may have minor cosmetic differences from the one shown in the listing imag

£ 500.00 (ex. VAT) 1 in stock

Lasos LGN 3000 PSU & LGK 7812 ML4 450-530NM Laser

ITEM-47067

Lasos LGN 3000 PSU & LGK 7812 ML4 450-530NM Laser

This system was removed from a university laboratory where it was surplus to requirements.

The PSU powers up successfully; however, the laser itself has not been tested. Both the PSU and laser are in good used cosmetic condition and were originally spares from a Zeiss LSM510 system.

Includes:

Lasos LGN 3000 Power Supply Unit
Lasos LGK 7812 ML4 Laser (450-530NM)

Model: LGN 3000 / LGK 7812 ML4

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Z Corporation ZPrinter 450 3D Printer Spares/Repair Lab

ITEM-37485

Z Corporation ZPrinter 450 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

In good cosmetic condition. The printer failed to power on and did not pass the PAT test.

Therefore, it is listed as Spares/Repair.

Specifications;

Build speed: between 2 to 4 layers per minute

Build volume:

X-axis: 8 inches (203 mm)
Y-axis: 10 inches (254 mm)
Z-axis: 8 inches (203 mm)
Build capacity: 640 cubic inches
Layer thickness:
Minimum: 0.0035 inches (0.089 mm)
Maximum: 0.004 inches (0.102 mm)
Color shell thickness: 0.025 inches
Resolution: 300 x 450 dpi
Materials:
Powder: zp130
Binder: zb59
Print heads:
HP11 (clear binder)
HP57 (single tricolor CMY)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

TurboChef NG0EW Sota High Speed Commercial Oven Spares/Repair

ITEM-51087

TurboChef NG0EW Sota High Speed Oven

This item was removed from a facility where it was surplus to requirement.

It is in reasonably good cometic condition and powers on.

Please note; During testing, after approximately 5 minutes of being powered on, the oven cut out and tripped the electrical system. After being left for a few minutes and powered on again, it successfully completed both the warm-up (to 260 °C) and cool-down sequences.

Additionally, two of the legs are slightly bowed in (as shown in the photos), however they are still supporting the unit without issue.

Due to the issues stated above, this item is listed as Spares/Repair.

Current counters:

Cook time: 78 — 05:11:48
Cook counts: 68,035
Oven time: 15,610 — 7:03:25
Mag time: 16 — 09:21:08

£ 500.00 (ex. VAT) 1 in stock

Job lot of 14 x Black Lab Stools/Chairs

ITEM-49574

Job Lot of 14 x Black Lab Stools/Chairs – Used

This lot of items was removed from a university laboratory where they were surplus to requirements.

The lot includes 14 lab stools/chairs of various sizes and patterns.

1 x Round stool

4 x Stools with castors

The remaining stools are standard fixed-leg types.

All units are in good used condition, showing general signs of wear from normal use. No structural damage has been observed.

£ 500.00 (ex. VAT) 1 in stock

Jun-Air Model 3 Air Compressor

ITEM-50039

Jun-Air Model 3 Air Compressor Lab

This item was removed from a university laboratory where it was surplus to requirement.

The unit is in good cosmetic condition and powers on; however, we are unable to test it further at our facility.

Both pressure gauges function as they should.

A service is recommended prior to use.

£ 500.00 (ex. VAT) 1 in stock

Magnetron Sputter Banking Plate 10 inch

ITEM-47782

Magnetron Sputter Banking Plate 10 Inch

This item was removed from a facility where it was surplus to requirements.

The plate features both rubber O-rings, which are in good condition.

£ 500.00 (ex. VAT) 1 in stock

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

ITEM-47154

Vitrifrigo FG14 CB UK Milk Cooler/Fridge

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Walker All In One Fumigation Units Lab

ITEM-46390

Job Lot of 6 x Walker All In One Fumigation Units Lab

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

Included is the following:

6 x Walker All In One Fumigation Units

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

ITEM-42462

Job Lot of 6 x Lafert Type: ST63C4 Motors w/ Air Blowing Impellers Spares/Repair

This job lot of items comes from a university laboratory. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs, as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Included in the lot:

6 x Lafert Type: ST63C4 Motors with Air Blowing Impellers
Further Information from Data Plate:
IEC60038 3~Mot.
Th.Cl.F IP55.
50Hz: 230/400V 0.13kW 0.87/0.50A.
60Hz: 254/440V 0.15kW 0.87/0.50A.
1360/1630min-1 cos 0.64/0.64.
Protector Type PT0 150°C.
Individual Dimensions: L 53cm x W 25cm x H 25cm, 4.6Kg each.
Shaft Length: 30cm.
Fan Dimensions: 25cm x 25cm.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

ITEM-48683

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, unable to test due to the power supply not being included.

Therefore, it is listed as Spares/Repair.

NEW ITEM

£ 500.00 (ex. VAT) 1 in stock

Lot of 19 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

ITEM-43125

Lot of 19 New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101

This lot of items was removed from a university where they were surplus to requirement.

Included are 19 Brand New Ergotron NeoFlex Desk Mount Tablet Arms 45-306-101.

1 of the boxes was opened to photograph the contents.

Vesa mounting interface 100 x 100mm and 70 x 70mm
Max load 1.1 Kg
Articulating arm with adjustable height, rotating, pan and tilt
Desk clamp mount and grommet mount.
Full instruction and assembly leaflet
Assembly Tools

£ 500.00 (ex. VAT) 1 in stock

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

ITEM-50643

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

ITEM-46517

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it did not drop in temperature.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Centrifuge 5810 R w/ Eppendorf A-4-81 Rotor Spares/Repair Lab

ITEM-47794

Eppendorf 5810 R Refrigerated Centrifuge - Spares or Repair

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition but does not power on, likely due to a suspected motherboard fault. Therefore, it is being sold as Spares or Repair.

Includes:

4 x Swinging Buckets (Eppendorf 09/04 – Max Load 780g)
8 x Sample Holders (5-hole, 3cm diameter)
4 x Sample Holders (1-hole, 6cm diameter)
1 x Sample Holder (12-hole, 2cm diameter)

£ 500.00 (ex. VAT) 1 in stock

Dionex GP50 Gradient Pump w/ Accessories Lab

ITEM-48617

Dionex GP50 Gradient Pump with Accessories

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition and powers on.

The screen remains slightly dark on the left side when powered on and the front door is broken and does not fit correctly.

Includes:

Dionex GP50
4x Schott-Duran 1000 ml bottles with stoppers adapted for pump tubes
2x Dionex bottle carriers (one fitted with a pressure gauge)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Bright Instrument SC12CL 5030 Microtome Cryostat Spares/Repair

ITEM-48821

Bright Instrument SC12CL 5030 Microtome Cryostat – Spares/Repair

This item was removed from a university where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however, during temperature testing the system did not begin cooling.

Therefore, it is listed as Spares/Repair.

Model: SC12CL 5030

£ 500.00 (ex. VAT) 1 in stock

Olympus CK Inverted Microscope w/ Olympus OM 2 Camera & Mount

ITEM-50881

Olympus CK Inverted Microscope w/ Olympus OM 2 Camera & Mount

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

Objectives

Olympus PL10 0.25 437824
Olympus 10 0.25 261421

Olympus OM 2 Camera & Mounting Kit

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Mobile Centrifuge Table Model 5821

ITEM-51293

Eppendorf Mobile Centrifuge Table Model 5821

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition.

Dimensions;

External length (cm) 70
External width (cm) 64
External height (cm) 47

It is compatible with following centrifuge:

5810, 5810R, 5804 & 5804 R

£ 500.00 (ex. VAT) 1 in stock

ELGA Option R15 Water Purifier Model OR015BPM1 2020

ITEM-51520

ELGA Option R15 Water Purifier Model OR015BPM1 2020

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Last Service: 18/03/2025

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Objet Eden 260V 3D Printer Spares/Repair

ITEM-51597

Objet Eden 260V 3D Printer Spares/Repair

This system was removed from a facility where it was surplus to requirements.

The unit powers on.

The previous owner advised that the system has a software issue, which prevents full operation and flushing of materials. The unit has been used with photo-cure resin, and while it has been cleaned externally, complete internal decontamination was not possible due to the software limitation.

The material cartridges and waste containers have been removed, and connections have been blocked off. Surfaces have been thoroughly cleaned, so casual contact should not result in exposure to residual material.

Due to the software issue and partial decontamination, the system is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Applied Biosystems ViiA 7 Real-Time PCR System Spares/Repair

ITEM-53914

Applied Biosystems ViiA 7 Real-Time PCR System Spares/Repair

This system was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition with typical signs of previous laboratory use. It powers on and a self-diagnostic test was performed.

The system passed all checks except the block mover test.

A note previously attached to the unit (dated 12/11/25) states: “Block mover damaged.”

Due to this fault, the system is being sold for spares or repair.

£ 500.00 (ex. VAT) 1 in stock

Job Lot of 13 x Various Wall Mounted X-Ray Light Boxes

ITEM-50137

Job Lot of 13 x Various Wall Mounted X-Ray Light Boxes

This job lot was removed from a university where it was surplus to requirement.

All the included light boxes are in good cosmetic condition and in good working order.

Individual Dimensions;

Dimension Set (L × W × H)

10: 75 × 12 × 55 cm

3: 73 × 12 × 50 cm

£ 500.00 (ex. VAT) 1 in stock

Wild Heerbrugg M40A Inverted Microscope 4/0.10, 10/0.25 Ph, 20/0.25 Ph, 40/0.25

ITEM-36616

Wild Heerbrugg M40A Inverted Microscope

This microscope was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition. It powers up and is in good working order (PSU not included) - we used a WILD PS from another item of stock.

Objectives:

1x Wild Heerbrugg 4/0.10

1x Wild Heerbrugg 10/0.25 Ph

1x Wild Heerbrugg 20/0.25 Ph

1x Wild Heerbrugg 40/0.25 Ph d=0.17

£ 500.00 (ex. VAT) 1 in stock

Mutek Infrared Laser System - TLS 150, 0LS150, KMPV50-0.5-J2 Lab

ITEM-37859

Mutek Infrared Laser System - TLS 150, 0LS150, KMPV50-0.5-J2 Lab

The lab confirmed that the system has not been used for 10 years but was working prior to being put away into storage.

Mutek Infrared Laser System

The Item Powers on and is in Good Condition with Some Wear

Model - 0LS150

Mutek Infrared TLS 150

Model - TLS 150

Kolmar Technologies Infrared Detector

Model - KMPV50-0.5-J2

Kolmar Technologies Infrared Detector PSU

Has no Information Plate

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter TQ-Prep Workstation Model 2428 Lab

ITEM-38326

This Beckman Coulter TQ-Prep Model 2428 was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has some minor marks from use.

It powers up, but we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

DakoCytomation Diode Lyt 200-S Laser Head w/ Controller & Fan/Cooler Lab

ITEM-41212

DakoCytomation Diode Lyt 200-S Laser Head w/ Controller & Fan/Cooler

This was removed from a working MoFlo system. It was surplus to requirements.

The unit powers up but has not been tested further due to safety restrictions around lasers at our site.

It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

Nanoentek ADAM-MC Automatic Cell Counter with Keypad Lab

ITEM-36868

Nanoentek ADAM-MC Automatic Cell Counter with Keypad

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test to further at our facility.

It is in good cosmetic condition with minor marks.

£ 500.00 (ex. VAT) 1 in stock

Maternity Birthing Simulator Cervix Examination - Limbs & Things - Adam Rouilly

ITEM-38859

Maternity Birthing Simulator Cervix Examination - Limbs & Things - Adam Rouilly

They are in generally good cosmetic condition but some of the latex items have torn.

2 X Cervix Examination Set - ESP ( Only the 1 Unit to use them with However)

2 X Birthing Simulator with removable Bumps - Adam Rouilly

2 X Prompt Birthing Trainer - Limb & Things

2 X Basic Obstetric Models - no Branding

2 X Babies with detachable Placenta

1 X Anatomically Correct Baby (Very heavy and sounds like it has liquids inside)

1 X Childbirth Graphics Baby doll with realistic head

1 X Peritoneal Lavage Trainer - Limbs & Things

2 X Quick Setup Guide laminated Posters

£ 500.00 (ex. VAT) 1 in stock

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System Lab

ITEM-31219

RareCyte CyteFinder & CyteSealer Liquid Biopsy Analysis System

This system was removed from a laboratory where it was surplus to requirements.

Both units power up and are in good cosmetic condition with marks from use.

It comes with 8 x Trays (53.5 x 16cm). One tray has been labelled as 'Not moving'

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC 5C Plus RC-5C+ Centrifuge Lab

ITEM-37328

Sorvall RC 5C Plus Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on.

However, during testing, the item produced the following code: Error Code 4 - indicating a 'Drive system failure'.

Which prevented further testing from being conducted.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Leica SP5 Confocoal Laser w/ NEC Monitors For Parts Lab

ITEM-41643

Leica SP5 and HP Z620 Workstation System with NEC Monitors - For Parts or Repair

This system was removed from a university lab where it was surplus to requirements.

The setup primarily consists of components from a Leica SP5 system but is currently non-operational and intended for spares or repairs.

This collection of equipment is in need of significant repairs, especially the electrical connections, as noted from the site that "Electrics are bust."

Included Equipment;

NEC MultiSync LCD 1990SXi Monitors (2 units): Dual monitors that are part of the system.

HP Z620 Workstation PC Tower: Includes a keyboard and mouse but does not have HDDs. It retains PCi cards for the Leica system.

Leica SP5 Unit: The operational condition is uncertain. It suffers from severe damage to the umbilical cable, with various wires cut, which affects its functionality.

Leica Microsystems CMS TCS SP5 Control Table: Comes with a table, but similar to the SP5 unit, it has umbilical cables that have been severed.

Leica Exhaust Unit: Forms part of the ventilation system for the Leica SP5.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wyatt MALS System Optilab REX/DAWN Helios/Eclipse 2 Seperation System Faulty Lab

ITEM-46153

Wyatt MALS System Optilab REX/DAWN Helios/Eclipse 2 Separation System

This system was removed from a university laboratory where it was surplus to requirements.

Each unit powers on, however, there are reported faults across the components:

The Optilab REX's screen powers on, but the computer component has failed.
The DAWN Helios powers on audibly, but the screen does not display.
The Eclipse 2 Separation System powers on, but the functionality of the valves could not be tested and is assumed non-functional based on client feedback.

Despite the operational issues, all items are in good cosmetic condition.

System Components:

Optilab REX
Model: WREX-09
Serial No: 652-REX
DAWN Helios
Model: WH-03
Serial No: 363-H
Eclipse 2 Separation System
Serial No: 0293

Please note: This system will no longer be covered by Wyatt for servicing.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Mini Spray Dryer B-290 Lab Spares/Repairs

ITEM-37142

Buchi Mini Spray Dryer B-290

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. The display isn't clear, but it looks to be showing "error 04".

The display then stopped showing any numbers or any sign of power. the ON/OFF switch still showed power. All buttons did not appear to be responsive.

The Peristaltic pump did not move or appear to show any sign of power. The pump at the back of the unit did not show signs of power or make a noise either.

Trolley included.

It is sold for spares/repairs.

All Products

Filters