PHCBI Cooled Incubator Type - MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

This item requires a Passcode to operate which is available on request.

Invitrogen Qubit Flex Flurometer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further.

The power supply cable is included.

Thermo Scientific Revco Ultima Plus ULT Freezer Model ULT3280-10HD-V43

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

Capacity 906 Litres

Internal dimensions W 99cm x L 69cm x H 1975cm

Four stainless steel shelves 98cm x 68cm

This Thermo Scientific Revco UXF Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition with marks from use.

4 x Shelves - 71 x 69cm

Model - Revco UXF

Model no. UXF50086V63

SN - 0132487401131018

Gilson HPLC System & Accessories - 306 - 811B - 805 - 832 - 7955- 119 - 506C

This was removed from a university lab where it was surplus to requirements.

This is a large system. Most of the units have been powered up but it has not been tested further. We anticipate it may take some level or refurbishment to get it back to full working order.

Included are;

1x Gilson XL Sampling injector:

Model 231

The unit powers on and is in good cosmetic condition

2x Gilson Piston Pumps:

Model 306

The units both power on and are in good cosmetic condition.

1x 15 pin MALE to FEMALE Ribbon cable:

The unit is in good cosmetic condition.

1x Gilson Manometric Module:

Model 805

The unit is in good cosmetic condition.

There was no power port on the unit, it must be powered by a controller cable connected via a 306 Pump.

1x Gilson Dynamic Mixer:

Model 811B

The unit powers on and is in good cosmetic condition.

1x Gilson Temperature Regulator:

Model 832

• Version 1.01

The unit powers on and is in good cosmetic condition.

1x Gilson Collum Chiller:

Model 7955

The unit powers on and is in reasonable cosmetic condition.

1x Gilson UV/VIS Detector:

Model 119

•Version 2.01

The unit powers on and is in good cosmetic condition.

1x Gilson 506C System Interface unit:

The unit is in good cosmetic condition. No sign of power.

1x 25 pin MALE to FEMALE serial cable for the (Gilson 506C System Interface unit)

The unit is in good cosmetic condition.

1x 25pin Male to 9pin FEMALE connector adaptor.

The unit is in good cosmetic condition.

1x Gilson Dilutor:

Model 401 

The unit powers on and is in good cosmetic condition.

1x Decade Electrochemical Amperometric Detector:

ANTEC Leyden

Version 3.02

The unit powers on and is in good cosmetic condition.

1x Viglen Contender PC:

Model C3000A

*OS

Windows 98

•Software

UniPoint LC Version 3.01

The unit powers on.

Accessories:

1x Viglen Monitor

Model TS700

The unit powers on and is in good cosmetic condition.

1x Viglen Keyboard

Model KB-0325

•PS/2 connector

The unit is in good working and cosmetic condition 

1x Microsoft Mouse:

FCC ID: c3kkmp1

•PS/2 connector

1x VGA Cable:

The unit is in good working and cosmetic condition.

CD:

1x Gilson UNIPOINT for Windows 98

Version 3.0

Floppy Disk:

Gilson System Software:

•Version 1.71

•Disks 1 - 4

Ser no. 219H8B765

The units are in good cosmetic condition.

•Win32s Disks 1-2

The units are in good cosmetic condition.

2x Gilson 10WSC heads (cases)

Ref E50056

• 3x Gilson WSC Pistion Pump Head user guides are inside the cases.

1x Gilson Thermostatic Rack Unit:

Ser no. 270J1G048

The unit powers on via the (Gilson 832 temperature regulator)the unit is in good cosmetic condition.

Gilson Racks for the thermostatic unit.

1x Rack Well, 60x 2ml glass or plastic vials.

Part no 30

1x Rack Well, 108 x 0.7ml glass or plastic vials.

Part no 31

The units are in good cosmetic condition.

1x Gilson Serial Input/Output Channel:

5 sets of( 2x FEMALE to 1x MALE 9pin connectors)

Manuals:

1x Unipoint system software: (Folder)

The manual is in good condition and appears to be complete.

1x Gilson 506C System Interface User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 401 Dilutor Instruction manual:

The manual is in good condition and appears to be complete.

2x Gilson 231-401 Auto Sampling Injector Instruction manual:

The manuals are in good condition and appear to be complete.

1x Gilson 119 uv/VIS Detector User Guide:

The manual is in good condition and appears to be complete.

1x 802C. 803C, 804C Manometric Module Instruction manual:

The manual is in good condition and appears to be complete.

2x Gilson 306 Piston Pump User Guide:

The manuals are in good condition and appear to be complete.

3x Gilson WSC Pistion Pump Head User Guides:

The manuals are in good condition and appear to be complete.

1x Gilson UNIPOINT for Windows 98 User Guide:

The manual is in good condition and appears to be complete.

2x 1x Decade Electrochemical Amperometric Detector Manuals:

The manuals are in good condition and appear to be complete.

1x Gilson 832 Temperature Regulator User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 811B Dynamic Mixer User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 805-806-807 Manometric Modules User Guide:

The manual is in good condition and appears to be complete.

1x Gilson SC- type Piston pump head Instruction manual:

The manual is in good condition and appears to be complete.

1x Gilson 506C System Interface User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 506 Contact/ Modem Operators Guide:

The manual is in good condition and appears to be complete.

Syringes:

2x Phenomenex HPLC Columns:

Model SYNERGI 4U Hydro- RP 80A

1x •Size 250x4.60mm

1x •Size 250x3.00mm

The units are in good cosmetic condition.

1x Phenomenex HPLC Column:

Model SYNERGI 4U Polar - RP 80A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model HyperClone 5u ODS (C18) 120A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model HyperClone 5u SILICA 120A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model Phenosphere - NEXT 5u C18

•Size 250x4.60mm

The unit is in good cosmetic condition.

2x HYPERSIL (5u ODS) Syringes:

Prod no. 30105-062

•Size 150x4.60mm

The units are in good cosmetic condition.

1x HYPERSIL (5u HyPURITY) Syringe:

Prod no. 21005-022

•Size 150x4.60mm

The unit is in good cosmetic condition.

2x HYPERSIL (ELITE C18 5u) Syringes:

Prod no. 30105-062

•Size 150x4.60mm

The units are in good cosmetic condition.

2x Phenomenex SYNERGI 4u Hydro -RP 80A Syringes:

Part no. 00G-4375-E0

•Size 250x4.60mm

The units are in good cosmetic condition.

1x Phenomenex HYPERSIL 3u C18 (ODS) Syringe:

•Size 100x2.00mm

The unit is in good cosmetic condition.

1x Phenomenex HYPERSIL 4u MAX -R P 80A Syringe:

•Size 150x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex LUNA 3u c18(2) 100A Syringe:

•Size 100x2.00mm

The unit is in good cosmetic condition.

2x HYPERSIL 3 C18 Syringes:

•Size 100x4.60mm

The units are in good cosmetic condition.

1x Phenomenex BIOSep- SEC-S 200 Syringe:

•Size 300x7.80mm

The unit is in good cosmetic condition.

1x Phenomenex JUPITER 5u C18 300A Syringe:

•Size 150x4.60mm

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 1802RSNE

•25uL

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 1801RSNE

•10uL

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 801RNE WAT

•10uL

The unit is in good cosmetic condition.

Sanyo -86 ULT Freezer - Model - MDF-U74V Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Lotus Blu70 30W Laser Engraving & Cutting System

This item is sold on behalf of a client where it is surplus to requirements.

It is in good cosmetic condition and in good working order.

The unit was purchased in 2018 and has undergone annual servicing since new, with the exception of 2023 when it was placed into storage.

Service records are supplied from 2020 onwards, and earlier maintenance was reported to have been carried out each year.

The price is £2,600 (including dismantling) or £2,000 (if handled by buyer)

Includes:

• Extraction unit with cable and hose
• Additional aluminium cutting bed rails (for rotation and cleaning)
• Focusing tool
• Custom keyboard stand designed to mount on the extraction unit
• Free software available directly from Lotus Laser

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Leibherr Mediline -35ºc LGPV 8420 Medical Ultra Low Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in excellent cosmetic condition and good working order, with minimal use as reported by the previous owner.

There is minimal surface damage as shown, this does not affect its functionality.

Specifications;

• Temperature settable range: -9˚C to -35˚C
• Four adjustable height shelves fitted - 80 x 60cm
• Capacity: 855 litres
• Energy consumption: 5,500 kWh/24h

Leibherr Mediline -35ºc LGPV 8420 Medical Ultra Low Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in excellent cosmetic condition and good working order, with minimal use as reported by the previous owner.

Specifications;

• Temperature settable range: -9˚C to -35˚C
• Four adjustable height shelves fitted - 80 x 60cm
• Capacity: 855 litres
• Energy consumption: 5,500 kWh/24h

Leibherr Mediline -35ºc LGPV 8420 Medical Ultra Low Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in excellent cosmetic condition and good working order, with minimal use as reported by the previous owner.

Specifications;

• Temperature settable range: -9˚C to -35˚C
• Four adjustable height shelves fitted - 80 x 60cm
• Capacity: 855 litres
• Energy consumption: 5,500 kWh/24h

Leibherr Mediline -35ºc LGPV 8420 Medical Ultra Low Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in excellent cosmetic condition and good working order, with minimal use as reported by the previous owner.

As displayed it has sustained damage during transit, this does not affect its functionality.

Specifications;

• Temperature settable range: -9˚C to -35˚C
• Four adjustable height shelves fitted - 80 x 60cm
• Capacity: 855 litres
• Energy consumption: 5,500 kWh/24h

Leibherr Mediline -35ºc LGPV 8420 Medical Ultra Low Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in excellent cosmetic condition and good working order, with minimal use as reported by the previous owner.

Specifications;

• Temperature settable range: -9˚C to -35˚C
• Four adjustable height shelves fitted - 80 x 60cm
• Capacity: 855 litres
• Energy consumption: 5,500 kWh/24h

Thermo Scientific Trace GC Ultra- HS TriPlus AutoSampler Gas Chromatography Lab

This system was removed from a university lab where it was surplus to requirements.

All included units are in good cosmetic condition and powers on.

The previous owner has stated the system was in working order prior to removal.

The unit has no detector.

System includes;

Thermo Scientific Trace GC Ultra

• Model - K0733B731300000
• S/N - 620100758

Thermo Scientific TriPlus AutoSampler

• P/N - TP032111100000
• S/N - 20106731

Thermo Scientific HS Autosampler

• Model - TP 112
• S/N - 20106296

Thermo Scientific AS Autosampler

• Model - TP 111
• S/N - 20106269

Accessories

• Thermo Standard Outfit for ECD
• Thermo Standard Outfit FID Detector
• Thermo Inline Filter Trace for ECD
• Various mixed parts and accessories

Nikon Eclipse TE200 Microscope w/ 3 x Objectives Plan, Ph w/  TE-PS100 PSU Lab

This item was removed from a university where it was surplus to requirement.

The microscope is in good cosmetic condition and in full working order.

Includes the following;

Nikon TE-PS100 Power Supply

2 x Nikon CFI 10x/22 Eyepiece

Objectives:

Nikon LWD 20x/0.40 WD 3.0 MC2 HMC

Nikon Plan 4x/0.10 WD 30

Nikon Plan 10x/0.25 Ph1 D1 WD-10.5

Cytiva VIA Shipper Engine for VIA Capsule System

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and has not been powered on, as it requires integration within a complete system.

Specifications:

• Serial No.: 1219003

Job Lot of Hollow Cathode Lamps

These were removed from a university lab where they were surplus to requirements.

There are 46 boxes of various brands, and it is uncertain if they are in working condition except for one box that has been labelled 'Not working.'

Job lot includes:-

S&J Juniper & CO Palladium 247.6 nm Cat#: 4140

S&J Juniper & CO Cobalt 240.7nm Cat#: N/A

S&J Juniper & CO Europium 459.4nm Cat#: 4117

S&J Juniper & CO Lead 217.0nm Cat#: 3129

S&J Juniper & CO Gold 242.8nm Cat#: 4121

S&J Juniper & CO Cobalt 240.7nm Cat#: 4113

S&J Juniper & CO Tin 233.5nm Cat#: 4162

S&J Juniper & CO Gadolinium 368.4nm Cat#: 4118

S&J Juniper & CO Chromium 357.9nm Cat#: 5112PE

S&J Juniper & CO Tellurium 214.3nm Cat#: 4157

S&J Juniper & CO Cadmium 228.8nm Cat#: 4108

S&J Juniper & CO Selenium 196.0nm Cat#: 4151

S&J Juniper & CO Ruthenium 349.9nm Cat#: 4148

S&J Juniper & CO Silicon 251.6nm Cat#: 4152

S&J Juniper & CO Titanium 364.3nm Cat#: 5163

S&J Juniper & CO Rhodium 343.5nm Cat#: 4146

S&J Juniper & CO Indium 303.9nm Cat#: 4125

S&J Juniper & CO Magnesium 279.5nm Cat#: N/A

S&J Juniper & CO Mercury 253.7nm Cat#: 4134

S&J Juniper & CO Bismuth Serial#: 73940

Baird Atomic LTD Neon 224.6nm Cat#: C832 SN

Perkin Elmer Lumina Lamp Part#: N305-0187

Perkin Elmer Intensitron Lamp Cd Part#: 303-6016

Perkin Elmer Intensitron Lamp Sb Part#: N066-1284

Perkin Elmer Intensitron Lamp Cd Part#: 303-6016

Perkin Elmer Intensitron Lamp Cu Part#: N305-0121

Perkin Elmer Intensitron Lamp Part#: N305-0146

Enbeeco Hallow Cathode Lamp Ar Type: C831/Sr

Thermo Scientific Hallow Cathode Lamp Palladium Part#: B 89748

Hitachi Hallow Cathode Lamp 343.5 Ne Part#: 207-2017

S&J Juniper & CO Antimony Part#: 4892d

S&J Juniper & CO Molybdenum 313.3nm Part#: 4746

S&J Juniper & CO Cadmium 228.8nm Part#: 4101

Rank Hilger Pt Cat#: FL2164

Varian Fe/Co/Ni/Mn/Cu/Cr Part#: 56-100076-00

Hilger & Watts Co/Mn/Fe/Cu Cat#: FL1210

Hilger & Watts Ti Cat#: FL1169

Pye Unicam Silver Part#: 611472

Varian Techtron Pb Cat#: 4R1352

Varian Techtron Cd Cat#: 4N934

Pye Unicam A1 309.3nm Part#: 9423

Baird Ne 249.8nm Cat#: C832-B

Cathodeon Ltd Ne Cat#: 3QNY/Fe

S&J Juniper & CO Ca/Mg 422.6/285.2 Cat#: 3621

Phillips Cu Part#: 9423 390 30291

Activion Ni 232/341 Serial#: 27387

Corning SynGen ThermoGenesis X-Lab Docking Station & Control Module System

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Included;

• 1 x X-Lab Control Module.
• 1 x SynGenX-Lab Docking Station.
• 1 x PSU.

ThermoGenesis/Corning X-Wash System

This system was removed from a facility where it was surplus to requirements.

It powers on and is in good cosmetic condition. No further testing has been carried out.

The system comprises the following:

• 1 x X-Wash Docking Station
• 1 x X-Wash Control Module
• 1 x Power Supply Unit
• 1 x USB Cable

ThermoGenesis/Corning X-Lab Control Module

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and has been power tested using a compatible dock and PSU from stock.

Please note, this listing does not include a docking station or power supply.

Includes:

• Original box

This cabinet is being sold on behalf of a Lab. It is surplus to requirements.

Shipping can be arranged directly from the Lab.

Please contact us if you require more information about this item.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Agilent Technologies 6850 Network GC System with Atas Programmable Injector

This system was removed from a university lab where it was surplus to requirements.

The system is in fair cosmetic condition and powers on. However, no further testing was conducted as there is no PC or software available to operate the units. The previous owner reported no known faults but noted that the system has been out of use for several years and would likely need recommissioning.

Specifications:

• Agilent Technologies 6850 Network GC System
• Serial No.: 6850-CN10750008

• Atas Programmable Injector
• Serial No.: 36083

Thermo Scientific Trace GC Ultra w/ Software Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in fair cosmetic condition. We are unable to conduct further testing at our facility.

Includes:

• Cables and wires
• Trace GC Ultra - Site Preparation and Installation Manual
• Gas Chromatography Manuals Set
• Thermo Scientific Xcalibur Software Disc
• Thermo Scientific Xcalibur 2.1 Software Disc
• GC Devices
• QuanLab Forms 3.1
• Thermo Scientific System Source Assembly Parts

Specifications;

• Model: Trace GC Ultra
• Serial No.: 6020118491

This Idaho Technology LightScanner Early Beta was removed from a university lab where it was surplus to requirements

This item is in good cosmetic condition and powers up, but we are unable to test it further.

MACS Miltenyi Biotec GentleMACS Dissociator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The previous owner has confirmed it was in full working order prior to removal.

• Model: GentleMACS Dissociato
• Serial#: 06132

Thermo Scientific Savant ISS110 Speedvac Concentrator

This system was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in fair cosmetic condition. The rotor spins, and the vacuum is functional.

Included:

• Manual
• 2 x condensation flasks
• Thermo Electron RH64-11 Rotor
• Thermo Savant RH6-50 Rotor
• Heat transfer liquid

Model: Integrated SpeedVac System

Model No.: ISS110-230

Serial No.: V13U-425629-VU

This was removed from a university lab where it was surplus to requirements.

The lab confirmed it was in good working order prior to collection.

PTI Photon Technology International Fluorimeter

Front SN - 1691

Back SN - 1570 - MP1

PowerArc Arc Lamp Housing

SN - 0002 Power Arc B

PTI 814 Multiplier Detection System

SN - 1596-810

Dimensions - 65 x 80 x 30cm

PTI BryteBox

PN - 30-102528

SN - 2320

PTI Lamp Power Supply

SN - 1808-LPS220B

PTI Motor Driver

Model - MD-5020

SN - 1704-5020

Quantum Northwest Temperature Control

Model - TC 125

SN - 2872

Eheim Eco Pro External Filter

Type - 2032 51 0

SN - 10074

All units power on and connect up with the cables (cables are labelled with numbers/letters for easy assembly).

Comes with PC, Keyboard & Mouse

The PC powers on and has FeliX32 Fluorescence Analysis Software

PC Log in Username & Password - Fluorimeter

FeliX32 Software Password - pti

Fluorimeter Undo Disk

Fluorescence Master Series User Manual

Arc Lamp Housing Manual

FeliX32 Manual

Eheim Eco Pro Manual

Bucher Hydraulic Power Supply (QT-34-016R)

This item was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner assured us it was in working order.

This item is fitted with a 32 amp red 4 pin plug.

Specifications:

• Model: QT34-016R
• Serial No.: 27361952
• 3 Phase Induction Motor
• Type: Y160L
• No.: 381 010

This Eppendorf Refrigerated Laboratory Centrifuge 5804-R was removed from a university lab where it was surplus to requirements

The unit has had a replacement actuator and gas strut fitted by a service engineer who then fully tested the unit.

Speed tested to 3600rpm (rotor not included).

It was then temperature tested with a digital thermometer (not included)

37ºC our thermometer showed 34ºC.

4ºC our thermometer showed 1.0ºC.

-9ºC(min) our thermometer showed -5.0ºC.

We would suggest that it was the probe placement that caused the temp readings to be a bit inaccurate.

Beckman Coulter JS-5.3 Rotor & Buckets Lab

This item was removed from a university where it was surplus to requirement.

It is in good used cosmetic condition.

Included are the following:

1 x Beckman Coulter JS-5.3 Rotor

4 x Beckman Coulter Bucket

Fluostar Galaxy Microplate Reader

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and successfully communicates with the Windows XP PC running BMG FLUOstar Galaxy 4.10-0.

It is in good cosmetic condition.

Appears to have no filters fitted.

Includes:

• Dell Windows XP PC with Keyboard Monitor & Mouse.
• Software: BMG FLUOstar Galaxy 4.10-0.

Serial Number: 403-0829

Mettler Toledo LabMax Automatic Lab Reactor

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was in full working order prior to removal.

This Bio Rad QX100 Droplet Reader was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in reasonably good cosmetic condition with some marks from use.

Power supply included.

With 96 well plate holder and 2 x 1 litre bottles for waste and oil

Sheen Wet Abrasion Scrub Tester Model - 903 Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

Thermo Scientific Heraeus Biofuge Primo R Centrifuge

This item was removed from a university where it was surplus to requirements.

The centrifuge is in very good cosmetic condition and has been tested to confirm functionality.

Specifications:

• Model: Heraeus Biofuge Primo R

Included:

• Swing-Bucket Rotor 7591
• 4 x 7555 Buckets with clear adaptors, each holding 3 x 5ml tubes.

Molecular Dynamics Storm B40 Microscopy System

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Thermo Fluoroskan Ascent 374 Microplate Reader Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Parker NitroFlow Lab Nitrogen Generator Model 4627 Lab

Model: Nitroflowlab 4627

Serial No. 4627-12NFL00021

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on. After running for 10 minutes, the menu read the following 2 Maintenance issues:

• Replace Inlet Filter.
• Calibrate O2 Sensor.

Therefore, it will require servicing before use.

Thermo Scientific VP100 Vapour System Lab

This item was removed from a university lab where it was surplus to requirement.

It powers up and is in good cosmetic condition.

We have not tested it any further.

Included;

• 2 x 1000ml Nalgene Bottles
• Various connecting tubes

Hologic Delphi QDR 4500 DEXA Scanner (X-ray Bone Densitometer)

This item was removed from a university laboratory where it was surplus to requirements.

The transformer powers on, but the main unit has not been powered up due to safety limitations with X-ray equipment.

The previous owner has stated a QA was last completed in November 2023.

There are no known faults.

The PC system has the following software installed (Hologic Discovery QDR Series).

It is in reasonable cosmetic condition but it well used.

Safelab AirOne Blue AB900GS Fume Cupboard Lab

Manufacture Year: 2001

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and full working order. It was regularly serviced until 2024.

It is available for collection from Devon, UK, but we may be able to offer shipping for an additional fee.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Beckman Avanti J-25 Floor Standing Centrifuge

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been tested in-house using a JA-25.50 rotor (not included).

The unit is in good working order, though it does not come with a rotor.

Molecular Devices E-Max Plus UV/Vis Microplate Reader

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. No further testing has been carried out. According to the previous owner, the unit was fully functional when last used for UV/Vis absorbance measurements and has been in storage for over four years.

The model is still supported by Molecular Devices, but up-to-date SoftMax Pro software is not included and would need to be purchased separately.

Includes:

• Molecular Devices E-Max Plus Microplate Reader
• Power supply unit (PSU)

Model: E-Max Plus

This Roche Diagnostics Corporation LightScanner LSBeta 384 was removed from a university lab where it was surplus to requirements

This item is in good cosmetic condition and powers up, but we are unable to test it further.

Leibherr Mediline -35ºc LGPV 8420 Medical Ultra Low Freezer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in excellent cosmetic condition and good working order, with minimal use as reported by the previous owner.

Specifications;

• Temperature settable range: -9˚C to -35˚C
• Four adjustable height shelves fitted - 80 x 60cm
• Capacity: 855 litres
• Energy consumption: 5,500 kWh/24h

Thermo Scientific Benchtop Laboratory Centrifuge Heraeus Megafuge 40R

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Please note; There is no rotor included.

Fisher Scientific GT2R Refrigerated Centrifuge Lab

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

Includes;

Thermo Scientific TX-400 Rotor

• Capacity: 4 x 400 mL
• Max. Speed: 5,000 rpm
• Max. Tube Length: 135mm

Spectrum Labs KrosFlo TFF System KR2i Peristaltic Pump w/ ACSS-20K Balance

This system was removed from a facility where it was surplus to requirement.

Both units are in good cosmetic condition and power on.

The lab confirmed the system was in good working order prior to removal.

Please note: The KR2i is controlled using KF Comm 2 software, which is not included.