Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

Binder BD 720 E2 Lab Incubator

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition, however the dial is cracked.

Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

• 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
• Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
• Reflector modules: DAPI, FITC, TRITC, empty

• 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
• Position 1: empty
• Position 2: 424228-9060 0.05T Neutral density filter 0.05
• Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
• Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
• Position 5: empty

• 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

• 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

• 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

• 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

• 1 x Camera adapter 60N-C 2/3" 0.5x (426112)

• 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

• 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

• Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

• 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

This system was removed from a lab as it was no longer required.

It was in full working order prior to removal from the lab.

An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber.

Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again.

Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II.

The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k.

We have not removed any parts from the system whatsoever.

Miltenyi Biotec Auto Macs Pro Separator System Lab

This system was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This system does not include the required Fluid Bottles, which are available for purchase from the manufacturer's website.

Fluidigm Polaris System PCR Molecular Biology Analyzer Lab

This item was removed from a university lab where it was surplus to requirements.

It powers on and is in good cosmetic condition. We are unable to carry out further testing at our facility. The previous owner stated it was in working order when last used and that it was last serviced in 2019. \

The total run time displayed is 00:13:35:00.

Includes:

• USB Keyboard
• 2 x Boxes Polaris Sponge Packs (P/N 101-0492), 5 per pack, EXP. 2018
• 2 x Boxes Polaris Single-Cell Dosing mRNA Seq IFC (5 in one box, 4 in the other)
• 1 x Box C1 Single-Cell Dosing mRNA Seq IFC (10 in box)

Perkin Elmer Chemagic 360 Magnetic Separator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition.

Due to the absence of a monitor or computer, further functional testing could not be conducted.

Includes:

• Manual
• Cables
• Plastic bottles

ABB Extrel Mass Spectrometer w/ Pumps, Chiller & Various Parts

This was removed from a university lab where it was surplus to requirements.

All units have been powered up unless specified. It is in reasonably good cosmetic condition with minor marks.

Molecular Beam System:

TPU 240 Pfeiffer Balzers PM P01 620 Turbomolecular Pump

Model: TPU 240

Serial#: 12087358

Item is in good cosmetic condition.

Unable to test.

Edwards Active Pirani Gauge

Model: APG-M-NW16

Serial#: 006737606

Untested

Pfeiffer Vacuum TMH 520

Model: TMH 520 IS

Serial#: 12392520

Untested

Edwards E2M 28 Vacuum Pump

Model: E2M 28

Serial#: 100203

44kg

Mass Spectrometry Stack on frame consists of:

Extrel Core Mass Spectrometers

Model: Merlin QMS Controller

Serial#: 28934

ABB Extrel Quadrupole Mass Spectrometry

Model: 150-QC Quadrouple Power Supply

Serial#: 24512

ABB Extrel Quadrupole Mass Spectrometry

Model: QMS DC Power Supply

Serial#: 23678

Edwards Active Gauge Controller

Model: Active Gauge Controller

Serial#: D38655000

Extrel Quadruple Mass Spectrometry Fan

Model: N/A

Serial#: 24561

Untested.

Pfeiffer Vacuum TCP 380 X 2

Model: TCP 380

Serial#: 7019428

MKS Baratron Power Supply and DPM

Model: N/A

Serial#: N/A

Additional Parts:

Edwards 18 E1M18 Rotary Vane Vacuum Pump

Model: E1M18

Serial#: 006727358

35kg

Edwards 2 E2M2 Rotary Vane Vacuum Pump

Model: E2M2

Serial#: 05035

30kg

Particle Measuring System Inc Condensation Particle Counter

Model: 761003

Serial#: 816

Date: Feb 1996

Pfeiffer Vacuum TCP 380

Model: TCP 380

Serial#: 7019428

Pfeiffer Blazers TCP 120

Model: TCP 120 A

Serial#: S4758

Horiba Triax Series 180 triple grating spectrometer

Model: Triax 180

Serial#: 0109-02-97

EMS Microtron 200 Microwave Power Generator Mark 3

Model: Microtron 200

Serial#: 111272

Julaba FE500 Compact recirculating cooler

Model: FE500 GB

Serial#: 9610050 4

Iskra PIO Class ll Microbiological Safety Cabinet Type MC18-2 on Stand Lab

This item was removed from a university lab where it was surplus to requirement.

The cabinet is in excellent condition and good working order. The unit was fitted with a 3-pin plug for testing (not included).

Specifications;

• Type MC 18-2 S16
• Serial No. 200273_20
• Year 2020
• Airflow 0.4 m/s

Features;

• 2 x internal power outlets
• 2 x internal Ethernet sockets

PHCBI Biomedical -30°C Freezer MDF-MU539HL-PE

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

Photon Eco max X-Ray Film Processor

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: There is no power supply included.

Life Technologies Ion Torrent Ion Proton Semiconductor Sequencer

This item was removed from a university lab where it was surplus to requirements.

It powers on, we are unable to conduct further testing at our facility.

The item is in good cosmetic condition and includes the following:

This system includes the following:

• Keyboard
• 184 x new Reagent tubes
• 80 x Reagent tube caps
• Bag of Molecular probes
• 14 x packs of ion proton reagent tube sippers
• 4 x packs of ion proton wash bottle sippers
• 2 x packs of ion PGM Reagent bottle sipper tubes
• 2 x packs of chip adapters
• 2 x box wash 2 bottles
• 1 x box template OT2 supplies 200 v2 kit
• 1 x box template OT2 supplies 200 v2
• 1 x box Hi-Q sequencing 200 solutions
• 1 x chip kit v2- 4 pack

Specifications:

• Model: Ion Proton Sequencer
• S/N: 247770005

Zeiss Axiovert S100 Microscope

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in fair cosmetic condition. However, there is a cracked hole at the top front of the microscope.

Included:

• Blue filter
• Yellow/green filter

Objectives:

• Zeiss Achrostigmat 10x/0.25 (Yellow Band)
• Part No.: 44 01 31
• LD Achrostigmat 32x/0.40 PH1 (Green Band)
• Achrostigmat 5x/0.12 (Red Band)

Eyepiece:

• 2 x Carl Zeiss 44 42 32 E-Pl 10x/20

Eksigent NanoLC-Ultra 2D Plus, NanoLC-as-2 Autosampler, cHiPLC LC System Lab

This item was removed from a university lab where it was surplus to requirement.

Each included unit is in good cosmetic condition and power on. The previous owner has stated the system was in complete working order prior to it being decommissioned in 2020, they also noted that all required cables (Power & Connecting) are included.

System consists of;

• Eksigent NanoLC-ultra 2D Plus

  Serial No. 11-01-15-236

• Eksigent NanoLC-as-2 autosampler

  Serial No. 111271

  Year 2016

• Eksigent cHiPLC Nanoflex docking station

  Serial No. 11-01-18-228

• Eksigent eks-PS-250 power supply

  DC24v/DC5v

  Part No. 800-00293

  Serial No. 38080411

• Protek Power 24v AC adapter

  Model PUP180-14

  Serial No. 113475

Also included;

• 1 x spare Powermax ll pump for NanoLC-ultra-2D model P21NSXC-LSS-NS-15 part No. 3000621
• 2 x 250 Nalgene bottles with caps
• 3 x data cables
• 1 x 12 position sample tube holder
• 1 x 2.4 um needle part No. 5820.3010
• 1 tubing set 845 1/32"
• 3 x packs of 10 tubing sleeves
• 2 x lengths of 10mm tubing
• 5 x used sample needles
• 1 x pump head manifold

Thermo Scientific Barnstead Thermolyne Pyro-Clean Glassware Oven Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in very good cosmetic condition.

Specifications;

• Model OV134510-33
• Serial No. 2004100457868

Included:

• 1 x length of unused door seal strip
• 1 x bag of door seal securing screws
• 1 x bag of door seal washers
• 1 x used oven tray containing catalytic pellets
• 1 x 50ml bottle of red gage oil

Thermo Scientific Haake SC 100 & Thermo Scientific Haake S3.

This item was removed from a facility where it was surplus to requirement.

Item is in a very good cosmetic condition and in good working order.

Water temp range: 5˚c to 95˚c.

EG & Water temp range: -30˚c to 100˚c.

PG temp range: -20˚c to 100˚c.

LD Didactic Polarimeter Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent condition and in good working order.

The previous owner stated it was not used after it's purchase in 2012.

Job Lot of 50 x Motic Moticam 1 800x600 Pix Microscope Cameras

This lot was removed from a facility where it was surplus to requirement.

They are all in good working order.

Includes;

• 47 Motic Camera Adapters with 8mm Focusable Macro Lens
• 2 Motic Camera Adapters with 12mm Focusable Macro Lens
• 48 Motic Camera 30mm Eyepiece Adapters (2 Sealed)
• Large Supply of Power Cables for the items.

Microgen Pulsifier II Microbiology Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: The door seal is worn.

Sonics Vibra Cell Ultrasonic Processor VC 130

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Hielscher UP200St-G Ultrasonic Generator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specac Silver Gate Evolution Single ATR Spectroscope Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and good mechanical order, we are unable to test it further at our facility.

Faults:

The mirrors in the unit need cleaning; they are removable and adjustable.

Two of the top plate assemblies with part number J have stickers stating they are poor quality.

Also included are the following:

3 x ZnSe flat crystal top plate assemblies Part No. 10683-1 Part Nos. J 21967 J 21966 M27867

1 x Bottom plate with prism

1 x Concave pellet anvil Part No. GS10532

2 x User Manuals

2 x Spare "O" rings to hold anvil in place

1 x Volatiles cover Part No. GS10503

2 x Bellows to connect unit to infrared spectrometer

1 x Glass prism marked calcium and fluoride prism DRGN2 18328

1 x Storage and transport hard case

Specac Silver Gate Evolution Single Reflection ATR Spectroscope Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and in good mechanical order, we are unable to test it further at our facility.

Also included are the following:

1 x ZnSe flat crystal top plate assembly Part No. 10683-1

1 x Bottom plate with prism Serial No. H20662

1 x Flat anvil Part No. 10567

1 x Concave pellet anvil Part No. GS10532

2 x User Manuals

1 x Original Storage Hard Case

BIOMAT 2 Robotic Class II Microbiological Safety Cabinet 2500 x 1350 Lab

This item is being sold on behalf of a client as surplus to requirements.

The system was inherited by the current owner but has remained in its packaging as it was too large for their laboratory space. The client has advised that they were assured the cabinet was in working order prior to storage; however, it is currently disassembled/deconstructed and has not been assembled or tested by the client.

The unit is currently in need of cleaning and is being sold from storage/disassembly condition.

Included Components

BIOMAT 2 Robotic Class II Microbiological Safety Cabinet

Serial Number: C2787-9

Approximate dimensions stated: 2500 x 1350

Stock/reference image of assembled unit available

Any components shown in the supplied photographs

The system is currently held at the client’s facility and can remain there until sold.

Collection/pickup must be arranged by the buyer. The item is large, disassembled, and currently taking up significant storage space, so prompt collection is preferred.

Please note: This item is sold on behalf of a client and is non-returnable and non-refundable.

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020.

It is in good cosmetic condition with minor marks.

Included with it are;

Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS software

Several manuals, safety, performance and maintenance schedule, pre-installation and operation

New and used spare skimmer and sampler cones

Spare electron multiplier

new and used spare printed circuit boards

Various tubing and connectors

Packet of various Thermo O rings

Many other unidentified small parts in sealed packaging

Genomic Solutions Investigator ProGest In-Gel Digestor FPLC Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, the previous owner has stated it was in working order prior to it being decommissioned in 2022.

When powered on the unit successfully completed a self-initialising homing procedure.

Includes the original user manual.

New Brunswick Scientific U725 -86 Ultra Low Temp Freezer

This item was removed from a facility where it was surplus to requirement.

It is in good working order.  

Includes;

• New Brunswick Scientific CO2/LN2 Back-up Module

CyBio CyBi Well Vario Pipetting Robot System - 96-Head & 384-Head

This is being sold on behalf of a university lab. It is surplus to requirements.

The unit is in excellent cosmetic condition. It has not been serviced or used for several years but was in good working order prior to this.

It also has incorporated a small robotic arm that can pick up racks/plates and a capper/decapper for microtubes (FluidX or Matrix) with septum seals.

We have installed a new HDD with Windows 7 on the PC.

The CyBio Composer V2.10 software is included and also installed on the PC.

The software will require setting up before use.

The system includes the following:

CyBio CyBi Well Vario Pipetting Robot System

Right:-

CyBi - Well vario 384/40

OL3381 1 1011

Right Right Stacker - 0027 1 8014

Right Left Stacker - 0027 1 8011

CyBi - Well vario 96/250

OL3381 1 1010

Left:-

Left Right Stacker - 0027 1 8006

Left Left Stacker - 0027 1 8007

Comes on 2 x trepsa tables

Table dimensions - L180 W90 H84cm

PC - Dell Precision T1650

Comes with Dell 17" Monitor, keyboard & mouse

Other parts incuded:-

Fluid X Xdc-96pro

Model - HT112E/MI

SN - 40.165

4 x 6L Nalgene Water Containers

Moxa UPort 1610-16 USB to 16 Port RS-232 Serial Hub

SN - TABF01136349

CyBio Power Supply

0L3901 1 4003

CyBio Power Supply

3402 5 8135

CyBio Expansion Module

0026 4 4103

CyBio Expansion Module with 2 x easy-load MasterFlex 7518-00

0026 3 7210

CyBio Expansion Module with 2 x easy-load MasterFlex 7518-00

0026 3 7206

2 x Gilson Tube Rack holders

Voyager Barcode Scanner

2 x Boxes of Eppendorf 384 PCR Plates (300 PER BOX)

1 x Box CyBi TipTrays 384 - 25ul 6 x 4 Trays

1 x Box CyBi - TipTrays 96 - 250ul 6 x 3 Trays

Tables not included.

Julabo F1000 Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

Leica RM2125RT Microtome Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with all mechanical elements in good working order, we are unable to test it further at our facility.

The unit has no sample holder.

Qiagen PyroMark Q96 ID And PyroMark Q96 Workstation  Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This item also includes the following:

Pyromark Q96 Lab station with plastic liquid container

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

The vehicle is a non-runner and has been parked up for the last 24 months. It has been converted into a food truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

• Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

• Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Pizza oven dimensions are:

Opening is 53cm x Internal Width is 100cm x Depth is 120cm x Opening Height is 26cm.

The water urn wiring has been disconnected from the unit, as has the water bath.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Lochmaben UK

VW Golf 1.2 TSI Training Model Fully Functioning With Teaching Software from Block Automotive  - Car Clip Trainer

Product No. SSC SU Nr.4364

VW Golf Mark VII with 1.2 TSI petrol engine with 5-speed gearbox

Engine No. CJZ 023428

This item was removed from a university where it was surplus to requirement.

The vehicle is in excellent condition, with all body panels remaining undamaged.

The previous owner stated that this VW Golf Training Module is in complete working order and includes all software and documentation. It was recently fitted with a new battery, so no further investment is required. It has also been tested at our facility and found no faults or errors.

It was originally purchased for £22,800 in 2016 from Block Automotive Ltd.

Due to the nature of this item, it would require collection from our Scotland branch.

Also Included:

1 x Servicefactory Automotive Funktionsmodell SSC SU 4364 original software DVD

1 x Copy of software DVD

1 x Circuit diagrams with error codes folder for SSC SU Nr. 4364

1 x Circuit diagrams with error codes folder in German Language

1 x Data cable between the diagnostic box and PC

Shandon AS325 Rotary Microtome Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

This item requires 4 x AA batteries to operate.

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab

This system was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on.

The previous owner has notified us that this system is in full working order.

This system includes the following:

• Pharmacia LKB VacuGene Pump
• ProXPRESS 2D User's Guide
• ProXpress Test Sheets
• 2950-2017 Gell Cassette Assy
• 2950-2019 UV Gel Adaptor (Sealed)
• 2950-2048 Calibration Sample Assy
• PX2950-2006
• 2950-2049 Standard Wet Gel Cassette Assy
• Phoretix Software
• Proteome 1D Analyser Software and manual

Thermo Orion 960 Titration System With Orion 940 Expandable Ion Analyzer Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

System comprises;

• Thermo Orion 960 Titration System
• Thermo Orion 940 Expandable Ion Analyzer

Accessories:

• 3 x Thermo Orion 9435BN Bromide half-cell ISE
• 1 x Thermo Orion 9512 Ammonia
• 1 x Thermo Users Guide Chloride Electrodes
• 1 x Thermo EA 940 Training Guide

Leica 2035 Jung Biocut Microtome Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and is in good working order.

The previous owner confirmed it was in working order prior to removal.

BioTek BioHit Bp800 Platereader​

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Metaserve Universal Polisher 010014 200mm

This item was removed from a facility where it was surplus to requirement.

The unit is in good working order.

Please note: There is residue build-up within the main chamber, along with areas of chipped paint and light surface rust.

Accessories included:

• Polishing Discs
• 2 x 40nm Colloidal Silica
• 1 x 1 Micron Alumina
• 1 x 6mm Diamond
• 1 x Unknown Disc
• 2 x Base Plates

Buehler VibroMet Polisher w/ 3 x Polishing Disc

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Includes;

• 3 x Spare Polishing Disc

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is surplus to requirements.

The lab informed us that it was working when last used.

The microscope is from 1998, has one SE2 Detector.

Included are the following;

Hitachi S3000H SEM Scanning Electron Microscope Lab

Model: S-3000H

Date: 9/8/12

Part#: 50E-G386

Serial#: 1014-30

System specifications

- 0.3 - 30kV acceleration voltage range

- 5 nm resolution at 25kV in variable pressure mode

- 150mm diameter maximum specimen size

- Dual-bias for low voltage signal noise

- Backscatter mode

Canatron Transformers EN 60742 Transformer

Model: EN 60742

Serial#: CT6699

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: G8E008620

Hitachi CM751ET Monitor

Model: CM751ET

Serial#: T9A 012253

Hitachi S3000H SEM Control Panel

Serial#: 1014-30

Edwards Oil Mist Filter EMF20

Serial#: A 462 29 000

Hitachi Measure Function Setup Disk V 01-05

Serial#: 50E-5497

Hitachi SEM Data Manager Setup Disk V 01-05

Serial#: 50E-5502

Hitachi S-3000Series V 10-16 CD Disc 1 & 2

Serial#: 50E-8108

Hitachi PC-SEM Restore CD Disc 1 & 2

Serial#: 1014-30

Adaptec SCSI Select v2.57.4 Floppy Disk

Serial#: 1492920-00

Adaptec AVA-2915LP/2930LP v1.13 Floppy Disk

Serial#: 1495022-00JA

HP Operating System DVD

Serial#: 483886-B21

Contec Drivers Software COM Setup Disk v.1.8

Serial# LYBM994

HP Compaq Business PC Documentation and Diagnostics DVD

Serial#: 490849-B21

HP Operating System DVD

Serial#: 394378-002

HP Operating System DVD

Serial# 486467-B22

HP Restore Plus! DVD

Serial#: 481206-B25

Roxio Creator Business 10 DVD

Serial#: 498164-B21

S300H Printed Circuit Board

Model S-3000H SEM Instruction Manual

Serial#: 50E-9247-9

Hitachi S-Type Filaments

Date: 08.06.201

Lot#: 0490228080

Serial#: 777-0179

Renishaw Structural & Chemical Analyzer Model SCA SEM Raman Spectrometer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is almost brand new. It has only run for 134 hours.

It is in excellent cosmetic condition with minor marks.

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

Elix Milli-Q Integral 10 Water Purification System Lab

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.  

Thermo Scientific Barnstead Smart2Pure Pro Water Purification System

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Zeiss Control Rack & Power Supply for LSM AIM-System Laser Scanning Microscope Lab

This sytem was removed from a facility where it was surplus to requirement.

It has not been powered on due to testing limitations with Class 3 and above lasers at our facility.

Includes;

• Carl Zeiss power supply (SN: 2562000616) which passed a Class 1 PAT test.

KEDEE KD-BM & BL Tissue Embedding & Cooling System Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Struers Planopol-2 & Pedemax-2 Grinding & Polishing Machine

This item was removed from a facility where it was surplus to requirement.

Both units power on with no issues noted.