All Products
Items 1201 to 1250 of 2605

£ 1,000.00 (ex. VAT) 1 in stock
PTI F10S-6x500 10,000RPM Rotor Lab
ITEM-45557
PTI F10S-6x500 10,000RPM Rotor Lab
This item was removed from a university laboratory where it was surplus to requirements.
The rotor is in good cosmetic condition but has not been tested further.
Specifications:
- Rotor Speed: 10,000 RPM
- Capacity: 6 x 500 ml test tube holders
- Serial No.: 60628

£ 1,000.00 (ex. VAT) 1 in stock
Watson Marlow Auto Drive 1PH 205U With 205CA8 8 Channel 8 Roller
ITEM-42105
Watson Marlow 205U with 205CA8 8-Channel 8-Roller
This item was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition with minimal wear.
It was tested to its maximum RPM of 90 and operated as expected.
The rotation switch (CW and CCW) also functions correctly.
Specifications:
- Model: 205U Auto Drive 1 PH
- Serial No.: K090777
Includes:
- 205CA8 8-Channel 8-Roller
- Part No.: 023.1201.000
- Issue: 2
- Serial No.: K090593

£ 1,000.00 (ex. VAT) 1 in stock
Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 Lab
ITEM-28195
This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E Series 6 was removed from a university lab where it was surplus to requirements.
The item powers on with blowers and both Light & UV working.
The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height.
The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway.
The lab reported that the filter has been removed.
Inside dimensions - D57.5 W118 H72cm

£ 1,000.00 (ex. VAT) 1 in stock
Monmouth Circulaire 650 Solvent Dispensing Station Lab
ITEM-42229
Monmouth Circulaire 650 Solvent Dispensing Station
This item was removed from a university laboratory where it was surplus to requirements.
The dispensing station is in reasonably good condition, with some surface rust patches on the cabinet exterior and surface.
The unit powers up and is in good working order, with fan, "Safe" light, and dispensing pump operating as intended.
We are unable to conduct further testing at our facility.
Specifications:
- Model: C650 FDS
- Serial No.: C650-037
- Last Service: 22.04.24
- Filter Requirement: FORM grade filter (for formalin fumes absorption)
Included:
- 1 x 10-litre Nalgene solvent bottle with top
- Operating and Maintenance Manual

£ 1,000.00 (ex. VAT) 1 in stock
Wheaton Modular Cell Production 3 Deck Roller Apparatus Model lll 4868 Lab
ITEM-37630
Wheaton Modular Cell Production 3 Deck Roller Apparatus Model lll 4868 Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
Specifications:
Bottle size: 108 to 121 mm in diameter, up to 550mm in length
Rotation: 0.25 to 5.3 rpm (110 mm bottle)
Operating temperature 10 to 40˚C

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card Lab Spares/Repairs
ITEM-35094
Rodwell Genesis 40 Autoclave MP24-MK111 With Smart Card
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has an issue with its cycle timer. It is sold for spares/repairs.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
INDENTEC Hardness Testing Machine 5030SKV Lab Spares/Repairs
ITEM-34831
INDENTEC Hardness Testing Machine Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, however it displays the following error: Check Lead which prevents further use.
It is listed as Spares/Repair.
Also included:
Calibration Certificate
User Manual
Optic Head

£ 1,000.00 (ex. VAT) 1 in stock
Twinbird Corporation SC-UE15R FPSC Module UE15 with Heat Absorption Ring
ITEM-45305
Twinbird Corporation SC-UE15R FPSC Module UE15 with Heat Absorption Ring
This item was removed from a university lab where it was surplus to requirements. It is in good cosmetic condition but has not been powered on, as it requires wiring into a power supply.
Specifications:
- Model: SC-UE15R
- Serial No.: 3 5Z16

£ 1,000.00 (ex. VAT) 1 in stock
BioMat 2 Class ll Microbiological Safety Cabinet On Stand With Ducted Exhaust
ITEM-42261
BioMat 2 Class II Microbiological Safety Cabinet with Ducted Exhaust on Stand
This item was removed from a university where it was surplus to requirements.
The cabinet is in good cosmetic condition and includes a steel stand measuring 113 x 60 x 83 cm (w x d x h).
The unit powers up and is in good working order. A strong airflow was observed, and the inflow needle indicator reached the green safe zone during operation. Interior power sockets were tested and are functional. (Socket tester not included.)
It's been regularly serviced, with its most recent being on: 22.04.24
Specifications:
- Serial No.: MC5765/1
- Exhaust outlet: 20 cm diameter duct connection
- Formalin vaporiser external tank
Notes:
- The fan control button is missing its outer diaphragm, but is operational.
- No UV function included.

£ 1,000.00 (ex. VAT) 1 in stock
Foss Tecator FIAstar 5000 Analyzer Lab
ITEM-42096
Foss Tecator FIAstar 5000 Analyzer
This item was removed from a university lab where it was surplus to requirements.
The analyser powers on and is in reasonably good cosmetic condition with some wear. The peristaltic pump operates as intended.
Specifications:
- Model: FIAstar 5000 Analyzer
- Serial No.: 345600104
- Part No.: 10009732
Includes:
- Mascot Power Supply (Type: 9320)

£ 1,000.00 (ex. VAT) 1 in stock
Varian CC2C Module Model Sentorr Vacuum Gauge Controller Lab
ITEM-45019
Varian CC2C Module Model-Sentorr
This item was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.
Specifications:
- Model: Sentorr
- Serial No.: LID30427

£ 1,000.00 (ex. VAT) 1 in stock
Beckman Coulter JA-14 Fixed Angle Rotor 6x250ml 14000RPM Lab
ITEM-46143
Beckman Coulter JA-14 Fixed Angle Rotor 6x250ml 14000RPM Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.

£ 1,000.00 (ex. VAT) 1 in stock
Sorvall Porter-Blum Ultra Microtome MT-2 Lab
ITEM-44652
Sorvall Porter-Blum Ultra Microtome MT-2 Lab
This item was removed from a university where it was surplus to requirement.
The unit is in good cosmetic condition and in good working order.

£ 1,000.00 (ex. VAT) 1 in stock
Hewlett Packard 5890 Series II Gas Chromatograph Lab
ITEM-38122
This Hewlett Packard 5890 Series II Gas Chromatograph was removed from a university lab where it was surplus to requirements.
The unit powers up, and the GC oven is functional. (Digital thermometer not included). We are unable to test further at our facility.
It is in good cosmetic condition.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Fujifilm FLA-3000R Fluorescent Image Analyzer Spares/Repairs
ITEM-30522
This was removed from a university lab where it was surplus to requirements.
The unit powers up but a warning light flashes. It was not tested further.
It is sold for spares/repairs

£ 1,000.00 (ex. VAT) 1 in stock
Planer Kryo 560-16 Controlled Rate Freezer Lab
ITEM-38164
Planer Kryo 560-16 Controlled Rate Freezer Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it require a liquid nitrogen supply which we do not have available.

£ 1,000.00 (ex. VAT) 1 in stock
Sanyo Fistreem WDA300.RWI 5 AquaRee Water Purification Systems UV Lab
ITEM-40023
Fistreem AquaRee Water Purification Systems UV Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Varian 660-IR FT-IR Spectrometer Lab Spares/Repairs
ITEM-41289
Varian 660-IR FT-IR Spectrometer
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, it has been seen by an engineer with a summary of the report stated below.
The beam splitters showing signs of moisture damage, and the unit has software recognition issues.
As a result, it is listed as Spares/Repair.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair
ITEM-08317
Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair
This item was removed from a university where it was surplus to requirement.
This item is in poor cosmetic condition and is sold as Spares/Repair.
The lid of the item is not fixed, and the internal pump has been removed.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Beckman Coulter Avanti J-HC Centrifuge Lab Spares/Repairs
ITEM-31551
Beckman Coulter Avanti J-HC Centrifuge
This item was removed from a university lab where it was surplus to requirements.
The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted.
The spindle is bent.
Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator System Lab Faulty
ITEM-37190
Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator System
This system was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on.
We tested the system with a security key taken from another Chemagic we had in stock, although the system booted up it displayed a 'Door Open' error that prevented the system from initializing.
Due to this, this system is listed as Spares/Repair.
Security Key not included.
This system also includes the following:
- Chemagic 96-rod head
- Instruction manual
- Touch-screen monitor
- 5 x 96 well microplates/holders
- 1 x Newland wired scanners with stand
- table

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Eppendorf CryoCube F570h Ultra-Low Temperature Freezer Lab Spares/Repairs
ITEM-41128
Eppendorf CryoCube F570h Ultra-Low Temperature Freezer
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition.
The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
New Brunswick Innova 4330 Incubator Shaker Lab Spares/Repairs
ITEM-40991
This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surplus to requirements.
The unit powers up but does not shake. The heating and cooling functions work.
It is in reasonably good cosmetic condition with minor marks.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope Lab Faulty
ITEM-38264
ADE Phase Shift MicroXAM-100 Surface Profile Mapping Microscope
This system was removed from a university lab where it was surplus to requirements.
The stage is inoperable as the controller does not work. The stage does not move manually. For this reason it is sold for spares/repairs.
Cosmetic and working conditions vary as stated below each item.
ADE Phase Shift MicroXAM-100
Model: MicroXAM-100
The item is in excellent cosmetic condition and shows no signs of damage.
However, when switched on, the item does not power on.
The item includes the following components:
- Nikon CFWN 10x/20 Eyepiece x 2: Both eyepieces are in good condition with clear clarity.
- 50AT NA 0.55 885 Objective: This objective is untested.
- Phase Shift Technology Rotary Stage 4360:
Model: Rotary Stage 4360
Serial#: L56332-3021
The rotary stage is in good cosmetic condition and shows no signs of damage.
However, when switched on, it does not power on.
- Javelin Video Monitor:
Model: BWM9BX
Serial#: 7070083
The video monitor is in good cosmetic condition.
It powers on with the power light illuminated.
- Nikon Transformer and Nikon 50W AD Lamp:
Model: UN
Both the transformer and the Nikon lamp are in good condition and fully functional.
The light output can be adjusted fully.
- AD Phase Shift Controller:
Serial#: E71000-500
The phase shift controller is in good cosmetic condition.
It powers on with the power light illuminated.
Unfortunately, further testing could not be conducted.

£ 1,000.00 (ex. VAT) 1 in stock
CEM MDS-2100 Microwave Digestion System Lab
ITEM-39917
This CEM MDS-2100 Microwave Digestion System was removed from a university lab where it was surplus to requirements.
The item powers on and is in reasonably good cosmetic condition.
Unable to test as it requires manual calibration, no previous calibration settings saved. We were unable to do this at our facility.
Exhaust diameter: 75 mm
Rotor with 12 positions for 12 digestion vessels, lining PTFE, capacity appr. 300 mL - (Not included)
Internal Dimensions:
DX37WX39HX24cm

£ 1,000.00 (ex. VAT) 1 in stock
Leitz Diavert Inverted Microscope Lab
ITEM-39057
Leitz Diavert Inverted Microscope
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order but does not include Lamp Power Supply.
All mechanical elements are in good working condition with smooth, accurate movement.
Includes:
Leitz Wetzlar Gelbgrun (yellow-green) Microscope filter
Leica Leitz Phase Contrast Phaco 1 Microscope Filter in frame 39mm Dia
Leitz Phaco A 0.25 L62 Lamp:
2x Eyepieces:
PERIPLAN GF 10 x M Leitz Wetzlar Germany
Reasonably good clarity through both eyepieces.
Objectives:
Phaco 1 L32 /0,40 170/-
Phaco 1 10/0.25 160/-
Phaco L 20/0.32 170/-
Phaco 1 10/0.25 160/-

£ 1,000.00 (ex. VAT) 1 in stock
Wild Heerbrugg M40A Inverted Microscope 4/0.10, 10/0.25 Ph, 20/0.25 Ph, 40/0.25
ITEM-36616
Wild Heerbrugg M40A Inverted Microscope
This microscope was removed from a university lab where it was surplus to requirements.
The unit is in reasonably good cosmetic condition. It powers up and is in good working order (PSU not included) - we used a WILD PS from another item of stock.
Objectives:
1x Wild Heerbrugg 4/0.10
1x Wild Heerbrugg 10/0.25 Ph
1x Wild Heerbrugg 20/0.25 Ph
1x Wild Heerbrugg 40/0.25 Ph d=0.17

£ 1,000.00 (ex. VAT) 1 in stock
Genevac Boc Edwards Scroll Pump Model XDS5
ITEM-38431
Genevac Boc Edwards Scroll Pump Model XDS5
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition.
Please note: The pump requires connection to a Genevac evaporator to initiate operation.
Model: XDS5

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Leitz Dialux 22 Fluorescence Microscope With Camera + Control Unit Lab Faulty
ITEM-39087
Leitz Dialux 22 Fluorescence Microscope with Camera + Control Unit
This system was removed from a university lab where it was surplus to requirements.
The unit does not power up. We have tested the continuity and found no issues, but we are unable to find the cause of the issue. The power supply for the lamp is a visual PAT test fail due to exposed wires and also does not power the lamp.
Due to the faults listed above, this system is listed as Spares/Repair.
The system comprises the following:
- Leitz Vario Orthomat Controller
- Leitz Power Supply for Lamp
- Leitz Vario Orthomat 2 Camera
- Leitz Wetzlar 100W Lamp (Type: 307-143.003)
5 x Objectives:
- NPL Fluotar 6.3/0.20
- NPL Fluotar 16/0.45
- NPL Fluotar 40/0.70
- Leitz EF 63/0.85
- Leitz PL 2.5/0.08
2 x Leitz Eyepieces Periplan GW 10x M
Model: Dialux 22

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Christie Mirage Model S+4K Commercial Projector Spares/Repairs
ITEM-36557
Christie Mirage Model S+4K Commercial Projector
This was removed from a university lab where it was surplus to requirements.
The unit powers up but is displaying with a green tinge. We were unable to get this to change.
The lamp has run for 780 hours.
It is sold for spares/repairs.

£ 1,000.00 (ex. VAT) 1 in stock
BD FACSCalibur Flow Cytometer System Lab
ITEM-23424
This was removed form a university lab where it was surplus to requirements.
The unit powers up but has not been tested further.
It is in reasonable cosmetic condition but has rust and marks from use.

£ 1,000.00 (ex. VAT) 1 in stock
Packard Cobra II Gamma Counter Model D5010 System Lab
ITEM-36504
Packard Cobra II Gamma Counter Model D5010 System Lab
This system was removed from a university lab, where it was surplus to requirements.
All included units are in good cosmetic condition and powered on.
The system is fully functional, and the PC powered on successfully. The software and syringe runners are operational, though the system requests a printer connection. Overall, the system is ready for use and in working order.
Also included are the following;
1x Dell Monitor M
M/N: E773s
S/N: MY-OY1352-47603-4B4-B7T3
9x Syringe type tubes
1x Keyboard PS2
1x Bag of plastic tips
3x Plastic tip holders
5x Plastic lids
2x VGA type cables
2x Power leads
1x Power lead adaptor
2x Metal hook fixtures
2x 2 amp fuses
1x 15 amp fuse
1x Length of plastic tubing
1x bag of of metal hook fixtures
2x Thin wired VGA type connectors
6x Pipe connectors
1x Box of thin glass tubes (x5)
2x Boxes of assorted fixtures and fittings
1x Force Sensor (capteur de force)
M/N: ELJ-S045C-35G
S/N: R04074
1x Floppy Disc Cobra II Backup

£ 1,000.00 (ex. VAT) 1 in stock
Zeiss Axioskop EL-Einsatz Microscope Lab
ITEM-44925
Zeiss Axioskop EL-Einsatz Microscope Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
This microscope does not include any objectives, it was tested with an in-house Achrostigmat 10x /0.25.

£ 1,000.00 (ex. VAT) 1 in stock
Ceti Versus 3400.0000 Inverted Microscope with 2 x Objectives Lab
ITEM-36432
Ceti Versus 3400.0000 Inverted Microscope
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
2 x Eyepieces - WF10x/20
2 x objective lenses: -
1x CETI PL L 25x/0.4 160/1.2
1x CETI Ph+25x/0.40 160/1.5

£ 1,000.00 (ex. VAT) 1 in stock
Corbett Robotics CAS1200 Liquid Handling System
ITEM-45135
Corbett Robotics CAS-1200 Liquid Handling System
This item was removed from a university laboratory where it was surplus to requirements.
The system powers on and is in good cosmetic condition.
Includes:
- Manual
- Model: CAS-1200

£ 1,000.00 (ex. VAT) 2 in stock
Servomex Analyser Series 1400 CO2 Analyser Lab
ITEM-35073
Servomex Analyser Series 1400 CO2 Analyser
This was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further at our facility.
It is in good cosmetic condition with minor marks from use.
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm Lab Spares/Repairs
ITEM-34798
Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm
This was removed from a university lab where it was surplus to requirements.
The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

£ 1,000.00 (ex. VAT) 1 in stock
Vacuubrand Vakuum-Pump system BVC 81 VNC 1 Lab
ITEM-41234
Vacuubrand Vakuum-Pump system BVC 81
This was removed from a university lab where it was surplus to requirements.
The unit powers up and runs. The tube connecting the pump to the bottle has been snapped off, allowing all the air to escape before it converts into the bottle. This tubing will need to be replaced but is a consumable.
Unable to test further at our facility.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Job Lot of STOE XRD Crystallography Parts Lab
ITEM-38150
Job Lot of STOE XRD Crystallography Parts Lab
These items were removed from a university where they were surplus to requirement.
All XRD items are in reasonably good cosmetic condition, none of them have been powered or tested.
The PC has been powered on and has the following software installed:
- Winxpow Software
No password is required (press 'Cancel' when the computer asks for a password).
This PC runs on Microsoft Windows 95.
This item is also supplied with various keys and power cables.

£ 1,000.00 (ex. VAT) 1 in stock
Waters 70001117 High Temperature Dual Ion Guide Assembly Lab
ITEM-38451
This Waters 70001117 High-Temperature Dual Ion Guide Assembly was removed from a university lab where it was surplus to requirements.
The item is in good cosmetic condition but due to the power supply not being included, we are unable to test, therefore the item is sold as Spares or Repairs.
Power supply not included.

£ 1,000.00 (ex. VAT) 1 in stock
Laser Optics Tropel EFL 33.91mm F/8.70 Precision Optical Lens
ITEM-46393
Laser Optics Tropel EFL 33.91mm F/8.70
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it at our facility.

£ 1,000.00 (ex. VAT) 1 in stock
Siemens IEC-60034-1 Pump with Heat Exchanger
ITEM-24626
This was removed from a university lab where it was surpus to requirements.
The unit is operational but noisy. We used 3-phase plug in testing (not included).
It is in reasonable cosmetic condition with marks from use.

£ 1,000.00 (ex. VAT) 1 in stock
CVI Melles Griot 05-LHP-928 Laser Head w/ Controller Lab
ITEM-41206
CVI Melles Griot 05-LHP-928 Laser Head w/ Controller Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
CVI Melles Griot 25-LHP-928-230 Laser Controller
Model: 25-LHP-928-230
CVI Melles Griot 05-LHP-928 Laser Head
Model: 05-LHP-928

£ 1,000.00 (ex. VAT) 1 in stock
Life Technologies Ion Torrent PGM Sequencer, One Touch 2, One Touch ES System
ITEM-29915
Life Technologies Ion Torrent PGM Sequencer, One Touch 2, One Touch ES System
This Life Technologies Ion Torrent system was removed from a university lab where it was surplus to requirements.
The system powers up and is in good cosmetic condition with minor marks, no further testing has been done.
The system consists of the following:
Life Technologies Ion Torrent PGM
Life Technologies Ion OneTouch ES Enrichment System Module
The device powers on and when the start/stop button is pressed, the arm begins to move. No further testing has been done.
Life Technologies Ion Torrent OneTouch 2 Instrument Next Generation Sequencing
The device has been turned on and the system is booting up. I used the touchscreen to open the lid, which successfully opened.
Life Technologies Ion Torrent Ultra-Turrax Tube Drive for PGM (Personal Genome Machine) by IKA
The device has been turned on successfully. I was able to adjust the timer settings as required.

NEW ITEM
NEW ITEM
£ 1,000.00 (ex. VAT) 1 in stock
Vacutech Cryo Arm Lab
ITEM-45169
Vacutech Cryo Arm Lab
This item was removed from a university lab where it was surplus to requirement.
It is in excellent condition, we are told it is brand new.

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,000.00 (ex. VAT) 1 in stock
HT Infors Multitron Triple Stack Incubator with Humidity and CO2 Lab Faulty
ITEM-45145
HT Infors Multitron II Triple Stack Shaking Incubator
This system was removed from a university laboratory where it was surplus to requirements.
The incubator units are in reasonably good cosmetic condition, showing signs of general use, with some marks.
The working condition of each unit is stated below.
Top and Middle Units: Operational except for faulty CO₂ sensors. Replacement sensors (GMP251) are recommended.
Bottom Unit: Requires replacement of blower motors and rear cooling fan for full operation.
The throw of the shaker plate could not be determined; however, the middle and top units operated reliably at 250 rpm.
Due to the above listed faults regarding all units, this incubator system is listed as Spares/Repair.
Includes:
- Triple-stack shaking incubators with top and middle units operational
- CO₂ control with Vaisala GMP221 sensor (replacement model: GMP251 recommended)
- Triple-stacked configuration with CO₂ and humidity features
Model: Multitron II

£ 1,000.00 (ex. VAT) 1 in stock
DW Scientific MACS VA500 Microaerophilic Workstation Lab
ITEM-36542
DW Scientific MACS VA500 Microaerophilic Workstation Lab
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It was tested with a digital thermometer (not included).
It is in reasonable cosmetic condition, with marks from use.

£ 1,000.00 (ex. VAT) 1 in stock
Planer Kryo 10 Series ii, MVE Lab 30, Controlled Rate Freezer System Lab
ITEM-35705
Planer Kryo 10 Series ii, MVE Lab 30, Controlled Rate Freezer System Lab
This system was removed from a university where it was surplus to requirement.
All units are in reasonably good cosmetic condition.
The Planer Kyro 10 Series ii Freezer & Planer Kyro 10 Series ii Biomed MR2 Printer both power on and pair successfully. The printer requires a Passcode which is available on request.
We were unable to test the Planer LNP 4-C Freezer & Power Supply as the power supply cable is not included, therefore we are unable to confirm its working order.
Also included are the following:
2 x washers for Paner Freezer
Serial#: 24 707
2 x Spare paper for Planer Freezer
Trolley stand with wheels

£ 1,000.00 (ex. VAT) 1 in stock
Minebea Intec Combics 2 CAW2S1-30ED-I Explosion Proof Weighing Scale Lab
ITEM-44657
Minebea Intec Combics 2 CAW2S1-30ED-I Weighing Scale Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and is in good working order. (Calibration weights are not included)
Model - CAW2S1-30ED-I
S/N -35566690

£ 1,000.00 (ex. VAT) 1 in stock
Olympus U-LH100HG Microscope Lamp
ITEM-41428
Olympus U-LH100HG Microscope Lamp
This item was removed from a university lab where it was surplus to requirement.
The unit is in good cosmetic condition.
The lamp both power up fine. (tested with an in-house power supply)
We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.
Items 1201 to 1250 of 2605