All Products

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Job Lot of Mixed Benchtop Lab Equipment - Corning, UVP, Bio-Rad Lab

ITEM-38988

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-39784 Various Chromatanks and Glassware

ITEM-39785 Scientific Software SS420X

ITEM-37446 Chiltern Magnetic Stirrer

ITEM-37447 Hanna Magnetic Stirrer

ITEM-37450 Hawksley Mirco Haematocrit MK IV

ITEM-37451 Corning Hotplate Stirrer PC-351

ITEM-37449 14 x Rexaloy table mount Gasbottle brackets (boxed)

ITEM-37448 2x Gasarc Techmaster regulators

ITEM-37452 2x GSE Druva Gas Regulators

ITEM-36612 BioRad 680 XR Microplate Reader

ITEM-39107 fisher scientific topmix fb15024

ITEM-39108 Techne Dri-Block DB.2A

ITEM-39109 Cole-parmer ultrasonic cleaner

ITEM-39110 Whirlmixer

ITEM-39786 Column Block Heater

ITEM-39111 Drummond Pipet-Aid

ITEM-39112 SwiftPet Pro

ITEM-39113 Thermal flask Sanso D-2000

ITEM-39114 UVP transilluminator

ITEM-36613 Beckman Coulter Centritube Slicer

ITEM-39115 Fisher scientific fb15012 topmix

ITEM-37054 Biorad Protean II xi Cell

ITEM-37055 2x Biorad TV50 Units

ITEM-37056 Pore Gradient Lipoprotien Electrophoresis System LPE-4003

ITEM-37057 Electrophoresis Dock

ITEM-37058 Kyowa Tokyo Binocular Compound Microscope

ITEM-39116 KNF VP Series

ITEM-39237 Sanyo Micro Centaur

ITEM-37059 Biorad Protean IEF Cell + trays

ITEM-39238 Oxoid Plate Shaker

ITEM-37060 5x Dalt II LF glass set of 3 (gel slot)- packaged

ITEM-37061 set Dalt II Gel slot blank inserts

ITEM-37062 Amersham Biosciences Ettan IPGphor isolelectric focusing system

ITEM-37063 Amersham Biosciences Dalt six Electrophoresis Unit

ITEM-37064 11x Biorad Protean IEF Disposable trays (17cm) with lids (opened)

ITEM-37065 Biorad Protean IEF Disposable Trays (25pk / 7cm with lids) boxed

ITEM-37066 Ettan Dalt six Gel Caster

ITEM-37067 Slab Gel Dryer

ITEM-37068 2120 Varioperpex II Pump

ITEM-37069 Ettan Dalt Si Electrophoresis Unit

ITEM-37070 Kenwood K Mix Blender

ITEM-37071 BOC Multistage Regulator (boxed)

ITEM-37072 GasArc Spec Master Regulator

ITEM-37073 Concoa Precision Gas Controls single stage Regulator (boxed)

ITEM-37074 Concoa Precision Controls Single Stage Regulator (boxed)

ITEM-37075 Brennensthul Signograph 25

ITEM-39793 Cairn Optoscan PSU, Arc Lamp PSU & Data Interface

ITEM-39795 Lambda SC

ITEM-37077 Hanna HI 1990M Magnetic stirrer

ITEM-39796 Scientifica Slice Platform

ITEM-37078 JVC KY-F55B Microscope Video Camera Nikon mount

ITEM-39246 Bio-Rad PowerPac Basic

ITEM-39245 Bio-Rad PowerPac Basic

ITEM-39244 Bio-Rad PowerPac Basic

ITEM-37079 4x Gas cylinder wall mounted brackets

ITEM-39877 Microscope stage plate and parts

ITEM-37082 Kenwood Chef Food processor

ITEM-39247 Bio-Rad PowerPac HC

ITEM-39248 Bio-rad Shock Pod

ITEM-39249 Lot of various sized cooler boxes

ITEM-39250 Fisher FB15012 TopMix Mixer

ITEM-39251 Lot of electrophoresis items

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Job Lot of Miscellaneous Microscope Parts And Laser Parts Lab

ITEM-45547

Job Lot of Miscellaneous Microscope Parts And Laser Parts

This job lot of items come from a university, where they were surplus to requirement.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

£ 700.00 (ex. VAT) 1 in stock

ESEWAY Hardness Tester SPV2P Lab

ITEM-45098

ESEWAY Hardness Tester SPV2P

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Sound Engineering Rack with Mixing Modules TDT Tucker Davies Technologies Lab

ITEM-44972

TDT Tucker Davis Technologies Audio Processing System

This system was removed from a university lab where it was surplus to requirements.

All units power on but have not been tested further. The system includes a number of cables.

Modules (Front, Top to Bottom):

System ID 3035

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

System ID 2901

MA3 Stereo Microphone Amp
RP2.1 Enhanced Real Time Processor
PA5 Programmable Attenuator
SM5 Signal Mixer

Back Units:

Daxten Scout Combo
Parasound Zamp v.3 Zone Amplifier

All items are in good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Perkin Elmer Sample Pan Press Lab

ITEM-44704

Perkin Elmer Universal Crimper Press Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good mechanical order.

£ 700.00 (ex. VAT) 1 in stock

MSE Mark No2 Consolidation Testing System Controlled Rate of Strain 2726 Lab

ITEM-44393

MSE Mark No2 Consolidation Testing System Controlled Rate of Strain 2726

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 700.00 (ex. VAT) 1 in stock

Optikinetics Opti GoBoShow Projector

ITEM-39904

This Optikinetics Opti GoBoShow Projector was removed from a university lab where it was surplus to requirements.

The item's cosmetic condition is very good.

It is fully operational with the lamp functioning correctly.

£ 700.00 (ex. VAT) 1 in stock

Large Safety Cabinet/Cupboard fitted with Gas Regulators Lab

ITEM-39050

Large Safety Cabinet/Cupboard fitted with Gas Regulators

This was removed from a university lab where it was surplus to requirements.

The unit is untested but in reasonably good cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek Robotic Transport A23467 & Two ALP Plate Movers Lab

ITEM-38067

Beckman Coulter Biomek Robotic Transport and Two ALP Plate Movers

This system was removed from a university where it was surplus to requirement.

All items are in very good cosmetic condition but are untested due to the control system not being included.

The system consists of the following:

Biomek Robotic Transport

Serial No. 2950119

XP Power PSU with 24v outlet for Biomek Robotic Transport

Model PUP110-14-S

2 x Biomek Alp Conveyers, both with Microscan barcode readers

Serial Nos. A16512AD1011110002. 394426AD0811100001

Microscan barcode readers

Model MS-710

Serial Nos. 0904608 1221144

£ 700.00 (ex. VAT) 1 in stock

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

ITEM-38019

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt Box

Shoulder Plate Kit

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, we are unable to test it further at our facility.

The kit includes the following:

1 x monitor arm

1 x tripod mount

1 x 80mm lens adaptor

1 x 95mm lens adaptor

1 x follow focus handle

1 x hard carry case

1 x 40cm steer whip

1 x 50cm steer whip

1 x top hand grip

1 x 0.5M pitch gear

1 x 0.6M pitch gear

1 x lens supporter

2 x allen keys

2 x 10cm rods

1 x nun's knickers

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab

ITEM-37161

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab

This system was removed from a university where it was surplus to requirements.

Both units are in good cosmetic condition, however, they have not been tested beyond that due to the system being a visual PAT fail, it is being sold for Spares or Repair.

Includes the following;

1x Autoclave Engineers unit

Model: E010HM0210C112B200121E2101

1x Control tower

Model: C1211224300010C

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Applied Biosystems Mariner Biospectrometry Spectrometer Workstation Mass Spec

ITEM-19492

This Applied Biosystems Mariner Biospectrometry Spectrometer Workstation was removed from a university lab where it was surplus to requirements.

All the parts are in good cosmetic condition but do have various marks and signs of general use.

The unit powers up but makes a burning smell. It is sold for spares/repairs.

The system consists of:

1 x Applied Biosystems Mariner Bispectrometry Spectrometer.

Also comes with various extra parts;

2 x Electrospray units.

1 x Nanospray unit in a box with 2 x Genwac Cameras attached.

1 x 'Electronics box' from old Mariner.

1 x Bag of spare fuses.

1 x Waste Bottle.

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Carl Padberg Zentrifugenbau Filter Centrifuge LE Lab Spares/Repairs

ITEM-36357

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requirements.

The cosmetic condition of this item is fairly good and it has powered on.

We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed.

We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too.

For this reason, It is sold for spare/repairs

The speed range is from 15000 to 40000 rpm.

Additionally included:

1x New Brunswick Scientific power supply switching/speed selection unit

1x Huber and Moser motor

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

ITEM-36238

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing Propeller)

This was removed from a university marine department. It was surplus to requirements.

Included are;

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine with Gearbox

Model: E40DPLIIS

Serial#: 05306542

The item appears to be in reasonably good condition.

It is missing the propeller and is possibly missing additional elements but we are unable to confirm.

The engine Cowl & Lower Engine Side Covers are Included but not assembled to the engine.

Evinrude E-Tec 40 Engine Cowl

Part#: 353643

Item is in good used cosmetic condition.

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Left

Part1#: 350 499

Part2#: 350 809

Part3#: 350 603

Evinrude E-Tec 40 Port Side Lower Engine Side Cover Right

Part1#: 350 498

Part2#: 350 652

Part3#: 350 8608

Item is in good used cosmetic condition.

£ 700.00 (ex. VAT) 1 in stock

Mitsubishi Freqrol - A500 Inverter Lab

ITEM-31520

Mitsubishi Freqrol - A500 Inverter Lab

Model: FR-A520-3. 7K

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

We are unable to test this item as it requires a connection to a larger system.

£ 700.00 (ex. VAT) 1 in stock

Edwards Freeze Dryer Modulyo Lab

ITEM-39926

This Edwards Freeze Dryer Modulyo was removed from a university lab where it was surplus to requirements.

The item powers on and is in reasonably poor cosmetic condition, unable to test it further at our facility.

It cools down but has not been tested under a vacuum.

£ 700.00 (ex. VAT) 1 in stock

Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder

ITEM-26280

This Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder was removed from a university engineering lab where it was surplus to requirements.

We haven't tested it at our facility further than powering it up but the lab said it was fully working prior to removal. It is a complete system.

Actual unit dimensions - D58 W80 H143.5cm (comes on a trolley for mobility)

27 x 58cm Platform to hold gas bottles.

it is in reasonably good cosmetic condition with marks from use.

£ 700.00 (ex. VAT) 1 in stock

Ophir Orion-PD-ROHS Laser Power Meter Lab

ITEM-44663

Ophir Orion Laser Power Meter

This item was removed from a university laboratory where it was surplus to requirements.

The laser power meter is in good cosmetic condition but does not power on unless connected to a power supply unit (PSU). It functions properly when powered via a PSU; however, the battery needs replacing.

A modified PSU has been included to accommodate this.

Includes:

Testing Head
Threaded Mount Plate
Key
Original Hard Case
Power Supply Cable

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System CP830, XS-2000 Lab

ITEM-42071

Rigaku X-Stream 2000 Cryogenic Crystal Cooler System

This system was removed from a university lab where it was surplus to requirements.

The Rigaku X-Stream 2000 main unit did not power on when tested with a 3 Phase test plug. It is in good cosmetic condition with minimal wear.

The cryogenic crystal cooler powers on and is in good condition with minimal wear. It has passed a PAT test, but no further testing was performed.

Due to the main unit not powering on, this system is listed as Spares/Repair.

Specifications:

Main Unit
Model: CP830
Serial No.: 1831322-240105A
Cryogenic Crystal Cooler
Model: XS-2000
Serial No.: 800150

£ 700.00 (ex. VAT) 1 in stock

Ingeny PhorLI IPU-S Vertical Electrophoresis System

ITEM-37755

INGENYphorU IPU-S Vertical Electrophoresis System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with marks from use.

The unit is watertight and the valve is working.

Also included:

FisherBrand HU13

FisherBrand HU6

INGENY phorLI

Deca Probe Series

Invitrogen Novex Mini-Cell

SPARES/REPAIR ITEM

£ 700.00 (ex. VAT) 1 in stock

Packard Tri-Carb 2100TR Liquid Scintillation Analyser (No Source) Lab

ITEM-42467

Packard Tri-Carb 2100TR Liquid Scintillation Analyser, ViewSonic Monitor, Epson LQ-350 Printer, and IBM Keyboard

This system was removed from a university lab where it was surplus to requirement.

The radioactive source from the Tri-Carb 2100TR was removed before it left its previous workplace.

The previous owner stated it was in working order prior to removal, however the Tri-Carb 2100TR could not be fully tested due to internal issues, including loose components and disconnected electrical cables found after removing the front panel.

Due to this, it will require recommission and is therefore listed as Spares/Repair, though it was confirmed as working before the source was removed.

Included Equipment:

Packard Tri-Carb 2100TR Liquid Scintillation AnalyserModel: A2100
Serial No.: 406445

Serial No.: RQK111800366
Year: 2011

Epson LQ-350 PrinterModel: PA81A
Serial No.: R9By022952

IBM KeyboardModel: RT3100 V:5NTWUK
Serial No.: 82490922

Included Accessories:

69 x sample holder racks with 18 small sample positions.
31 x sample holder racks with 12 large sample positions.
41 x Protocol Plugs Part No. 7000675.
2 x packets of rack labels.

Manuals:

1 x Tri-Carb Models 2100TR/2300TR Operation Manual.
1 x Tri-Carb 2000 Series Operation Manual.
1 x Epson LQ-300+II Printer Setup Guide.
1 x set of Tri-Carb Performance Certificates.
1 x DOS 3.30 User Guide.
1 x DOS 3.30 Reference (Abridged) User Guide.

Software:

1 x IBM DOS 3.30 on 3.5" and 5.25" diskettes (may be incomplete).
1 x set of 9 Tri-Carb A2100TR 3.5" Install Discs.
1 x Epson LQ-300+II Software CD-ROM Disc vol 2.1.

£ 700.00 (ex. VAT) 1 in stock

Genetix GSL-120 Stacker And GSL-10/GSL-120 Automated Stage System Lab

ITEM-41771

Genetix GSL-120 Stacker And GSL-10/GSL-120 Automated Stage System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This system comprises the following:

Genetix GSL-120 Stacker

Serial No. 003

Genetix GSL-10 / GSL-120 Stage

Serial No. 058

2 x Data cables

1 x Astec DPS55-M 24 volt power supply

1 x Power supply cable

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44400

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. it will likely need a service before it can be used again.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44403

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years.

It will require a service.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet Vitro 6 4 Cannister Touch Display Coffee Machine

ITEM-44404

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years and it would require servicing before use.

Key not included.

£ 700.00 (ex. VAT) 1 in stock

Denford Microrouter V5 Pro CAM CNC System with Software

ITEM-44931

Denford Microrouter V5 Pro

This system was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. The vacuum pump is functional. However, we are unable to conduct further testing at our facility.

Included:

Denford Update Disc
Denford Disc
Denford QuickCam Pro CAM Software
Denford VR CNC Milling Software
Denford CNC Projects Suite Milling
Denford QuickCam 4D Milling CAM Software
User's Manual
Denford CAD/CAM Design Challenge

£ 700.00 (ex. VAT) 1 in stock

Beckman J2-21 Floor Standing Refrigerated Centrifuge Lab

ITEM-42420

Beckman J2-21 Floor Standing Refrigerated Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order.

It was tested with a rotor from another Beckman model (Type JA-14) and reached a maximum speed of 14,000 rpm.

Specifications:

Speed Range: 100–21,000 rpm
Model: J2-21
Serial No.: 3241
Cat No.: 341737
Year: 1988

£ 700.00 (ex. VAT) 1 in stock

Coffetek Gourmet 83545 Touch Display Coffee Machine

ITEM-44402

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, but it has been out of use for 5+ years.

It will require a service.

Key not included.

Specification:

Model- Gourmet
Machine number- 83545
S/N- 60014387

£ 700.00 (ex. VAT) 1 in stock

Lot of 4 FBS Laboratory Floor Cupboards Lab

ITEM-42294

Job Lot of 4 FBS Lab Floor Cupboards

This item was removed from a university lab where it was surplus to requirements.

The lot includes:

3 x Floor-standing base cupboards with castors (100 x 50 x 85cm)
1 x Floor-standing base cupboard with castors (50 x 50 x 85cm)

All cupboards are in very good cosmetic condition, showing only a few light stains from use.

Features:

Two of the 100cm cupboards include an adjustable inner shelf (96 x 38cm).
All cupboards have secure door hinges, handles, and magnetic door catches.
Each door is lockable, with one Hafele 0001 key provided.
Mounted on four castors, with the front two being lockable.

£ 700.00 (ex. VAT) 1 in stock

Thermo Shandon Cytospin 4 Cytocentrifuge Lab

ITEM-20283

This Thermo Shandon Cytospin 4 Cytocentrifuge was removed from a university lab where it was surplus to requirements.

The unit has been inspected by a service engineer who fitted new plastic hinges fitted. The repair isn't perfect, but it's functional

It also appears to have a battery error. There is a battery soldered to the main board, it probably needs replacing. The unit shows an error 4 code when first switched on but if you press stop the code goes away, and the unit starts up normally.

The error relates to a discharged battery.

The unit is in otherwise full working condition and is in good cosmetic condition with just the marks from the repairs.

£ 700.00 (ex. VAT) 1 in stock

Millipore Elix 5 Water Purification System + 60L Tank Lab

ITEM-46763

Millipore Elix 5 Water Purification System + 60L Tank Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonably good cosmetic condition with signs of age and powers on, we are unable to test it further at our facility.

Please not; the included filter has expired, therefore it will require a replacement before use.

£ 700.00 (ex. VAT) 1 in stock

Leitz Micro-Manipulator Micromanipulator Lab

ITEM-41266

This Leica Microscope Micromanipulator was removed from a university lab where it was surplus to requirements.

Serial#: 078813

The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

£ 695.00 (ex. VAT) 1 in stock

Dynex Technologies Scientific OPSYS MR Microplate Reader Lab

ITEM-39804

Dynex Technologies Scientific OPSYS MR Microplate Reader

This was removed from a university lab where it was surplus to requirements.

The unit powers up and passes all self-tests with no faults.

It is in good cosmetic condition with minor marks.

£ 690.00 (ex. VAT) 1 in stock

Canon XF305 HD Video Camera Camcorder With Tripod

ITEM-38024

Canon XF305 HD Video Camera Camcorder With Tripod

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and good working order, we are unable to test it fully at our facility.

The unit has been etched with the previous owner's identity. This has been hidden from the photos to protect the client.

Batteries, case & tripod included.

No charger included.

£ 690.00 (ex. VAT) 1 in stock

Dionex Eluent Generator EG40 Lab

ITEM-38968

This Dionex EG40 Eluent Generator was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It passed self tests.

It is in good cosmetic condition with minor marks.

£ 690.00 (ex. VAT) 1 in stock

Leitz Micromanipulator Micro-Manipulator Lab

ITEM-41267

This Leica Microscope Micromanipulator was removed from a university lab where it was surplus to requirements.

Serial#: 0502166

The unit is in good mechanical working order and good cosmetic condition, we are unable to test it further at our facility.

£ 690.00 (ex. VAT) 1 in stock

Perkin Elmer HPLC System - 250 LC - 235C LC235C - 600 Link 610 Lab

ITEM-36766

Perkin Elmer HPLC System - 250 LC - 235C LC235C - 600 Link 610

This was removed from a university lab where it was surplus to requirements.

Included are;

Perkin Elmer 250 Binary LC Pump

Model - 250

SN - 141179

Powers on

Perkin Elmer Diode Array Detector 235C

Model - LC235C

SN - 235N6102304

Powers on

Perkin Elmer Nelson 600 Series LINK

Model no. 610

SN - 0033110033

Powers on

Tray with two waste bottles (the larger bottle has a hole in it)

PC comes with 19" Monitor, keyboard & Mouse - All power on and in working order.

The PC has TotalChrom Workstation V6.20 installed, but is, unfortunately, password locked.

Other bits include:-

Cables

GS Bottle Dispenser

Phenomenex Column - Jupiter 10u C4 300A (PN-03R-416-P0) 60 x 21.20mm

Phenomenex Column - Jupiter 10u C4 300A (PN-004-4168-P0) 250 x 21.20mm

£ 690.00 (ex. VAT) 1 in stock

Hanning Elektro-Werke Trivac Rotary Vane Vacuum Pump Typ D8B Lab

ITEM-21132

This Hanning Elektro-Werke Trivac Vacuum Pump Typ D8B was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a gauge (not included). It appears to be working well. The power cable is included.

It is in good cosmetic condition with some marks from use.

NEW ITEM

£ 690.00 (ex. VAT) 1 in stock

34 x Thermo Disposable Erlenmeyer Baffled Flasks 2000ml PETG 4116-2000

ITEM-36372

34 x Thermo Disposable Erlenmeyer Flasks 2000ml PETG 4116-2000

Brand new and sealed.

34 x Thermo Scientific 2 L with Blue vented Closure

P/N: 4116-2000

Lot N:1334359

£ 685.00 (ex. VAT) 1 in stock

Lamy Rheology Rheomat Model - RM 100 Viscometer Lab

ITEM-24333

This Lamy Rheology Rheomat Model - RM 100 Viscometer was removed from a university lab where it was surplus to requirements.

We were unable to power it us as we did not have the correct power supply.

It is in reasonably good cosmetic condition with some marks from use.

RECERTIFIED ITEM

£ 685.00 (ex. VAT) 1 in stock

Dentsply TRIAD 2000 Dental Visible Light Curing System Lab

ITEM-12593

This Dentsply TRIAD 2000 Dental Visible Light Curing System was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 685.00 (ex. VAT) 1 in stock

Syngene U:Genius 3 Gel Imaging System Lab

ITEM-34843

Syngene U:Genius 3 Gel Imaging System

This was removed from a university lab where it was surplus to requirements.

It is in full working order. It is in excellent cosmetic condition with minor marks.

Additional Items:

Superfrost Microscope slide

£ 680.00 (ex. VAT) 1 in stock

Jouan BR3.11 Refrigerated Benchtop Centrifuge Lab

ITEM-29891

This Jouan BR3.11 Refrigerated Benchtop Centrifuge was removed from a university lab where it was surplus to requirements

The unit powers up and is in good working order, but the lid has to be opened manually. The automatic switch is broken

It is in good cosmetic condition with minor marks.

Rotor Arm:

Max Load 2.8kg

Max RPM 5150

Buckets x 2:

Dimensions L5.5cm x W5.5cm x H9.5cm

Rotor:

Part No. 803

6 Hole

Dimensions L2cm x W2cm x H4cm

£ 680.00 (ex. VAT) 1 in stock

Dionex Model EG40 Eluent Generator Lab

ITEM-38969

This Dionex EG40 Eluent Generator was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It passed self tests.

It is in good cosmetic condition with minor marks.

£ 680.00 (ex. VAT) 1 in stock

Solartron Schlumberger 1286 Electrothermal Interface Lab

ITEM-36720

This Solartron Schlumberger 1286 Electrothermal Interface was removed from a university lab where ti was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in good cosmetic condition with marks from use.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

SPARES/REPAIR ITEM

£ 675.00 (ex. VAT) 1 in stock

CytoFluor Series 4000 System with CytoFlour & GraphPad Prism 5 Software Faulty

ITEM-36235

This CytoFluor Series 4000 System was removed from a university lab where it was surplus to requirements.

All elements of the system power up but the system is reporting a lamp failure in its maintainece checks. We replaced it with a different lamp, but the error still shows. The fan uses the same voltage as the lamp and is also not working, so there is an electrical fault at play here. The microplate incubator and tray eject functions are working.

It is in good cosmetic condition with marks from use.

Included are;

Applied Biosystems CytoFluor Multi-Well Plate Reader Series 4000

Model: CytoFluor

Serial#: HX1MNTC1290

Date: 2001 Sep

Optiplex 170L PC

Model: 170L

Service Tag: BJG8H1J

Express Service Code: 25120732231

HP 1902 Monitor

Model: 1902

Serial#: CNC4150RH

Date: 2004

Technika Mouse

Serial#: 0MS 001201

HP Keyboard

Serial#: KU-0316

The passwords for the PC will be supplied.

£ 675.00 (ex. VAT) 1 in stock

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

ITEM-29748

RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus

This was removed from a university lab where it was surplus to requirements.

The unit powers up and both the incubation and CO2 function have been tested. It is in good working order (Temp & CO2 sensor not included).

It is in reasonable cosmetic condition but has seen some heavy use on the inside. It is purely cosmetic though.

£ 670.00 (ex. VAT) 1 in stock

Axon Instruments Genepix Personal 4100A Microarray Scanner Lab

ITEM-38832

Axon Instruments Genepix Personal 4100A Microarray Scanner

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in great cosmetic condition with only minor marks.

SPARES/REPAIR ITEM

£ 665.00 (ex. VAT) 1 in stock

METTLER TOLEDO XSR1202S Precision Balance Lab Spares/Repairs

ITEM-35274

METTLER TOLEDO XSR1202S Precision Balance

This was removed from a university lab where it was surplus to requirements.

The unit powers up with a 12V DC supply (not included), but the control buttons are not functioning.

It is sold for spares/repairs.

£ 660.00 (ex. VAT) 1 in stock

Thermo KingFisher mL Particle Purification System Type: 701 Lab

ITEM-31373

This Thermo KingFisher mL Particle Purification System Type: 701 was removed from a university lab where it was surplus to requirements.

The unit powered up without issue and is in reasonably good cosmetic condition with marks from use. The screen is nice and clear.

All Products

Filters