All Products

RECERTIFIED ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-175 CO2 Incubator Lab

ITEM-35162

Sanyo MCO-175 CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and has been recertified. The CO2 and Heating features are working well.

This item is fixed with castors.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-554 Incubator Lab Spares/Repairs

ITEM-36213

This was removed from a university lab where it was surplus to requirements.

The unit does not power up.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

LEEC Compact Incubator Model K2N Lab

ITEM-41676

LEEC Compact Incubator Model-K2N Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition internally and externally.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire Model NU-5510E Incubator Lab Spares/Repairs

ITEM-46173

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5510E Incubator Lab Spares/Repairs

ITEM-46172

Nuaire NU-5510E Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and successfully reached and stabilised at 37ºc, however it failed to reach its maximum temperature of 60ºc.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LMS 400NP Cooled Incubator Lab Spares/Repairs

ITEM-42191

LMS 400NP Cooled Incubator

This item was removed from a university where it was surplus to requirement.

The incubator is in excellent cosmetic condition and powers on.

However, the compressor did not start up during testing, so the unit is unable to reach its minimum temperature of -10°C.

Therefore, it is listed as Spares/Repair.

Specifications:

Serial No.: 12425/17PP
Capacity: 450 litres
Internal dimensions: 64 x 55 x 118 cm (l x w x h)
Temperature range: -10°C to 50°C
4 height adjustable shelves (56 x 60 cm)
Factory set auto defrost system

£ 500.00 (ex. VAT) 1 in stock

LEEC Research CO2 Incubator Model GA2000 Lab

ITEM-41593

LEEC Research CO2 Incubator Model-GA2000

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition.

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Compact LidPark P00155 Lab

ITEM-37180

Thermo Scientific Compact LidPark P00155

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers up, we are unable to test it further at our facility.

Model: LidPark P00155

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge Spares/Repairs

ITEM-39217

Sigma 3-18K Refrigerated Benchtop Laboratory Centrifuge with Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up, but the display screen is faulty, therefore we were unable to test further.

It is in reasonably good cosmetic condition, with marks from use.

It is listed as Spares/Repairs.

Includes the following:

SIGMA 11133 Swinging Bucket Rotor w / 2 x Buckets

Bucket capacity: 4 x 550 ml

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Incubator Lab Spares/Repairs

ITEM-40000

Sanyo MCO-20AIC CO2

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wheaton 753680-2 Reach In Incubator Lab Spares/Repairs

ITEM-39203

Wheaton 753680-2 Reach In Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but would not heat up further than 35˚C. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

VWR 1927 Reach-In Dry C02 Incubator Lab Spares/Repairs

ITEM-39202

VWR 1927 Reach-In Dry C02 Incubator

This was removed from a university lab where it was surplus to requirement.

The unit initially powered up and worked to 35˚C only, but now will not power up due to a faulty switch.

The top panel is missing.

It is sold for spares/repairs

£ 500.00 (ex. VAT) 1 in stock

Leitz Wetzlar Dialux 20 Microscope w/ 3 x Objectives Phaco, Plan, NPL Lab

ITEM-40988

Leitz Wetzlar Dialux 20 Microscope

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition, with all mechanical elements in working order.

Includes the following.

1x Leitz Lamp Power Supply

Objectives:

1x Leitz Wetzlar P 10/0.25 170/-

1x Leitz Wetzlar NPL FLUOTAR 40/0.70 160/0.19 PHACO 2

1x Leitz Wetzlar PLAN 100/1.25 oil 160/0.17

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan CR 412 Refrigerated Centrifuge Lab Spares/Repairs

ITEM-37144

Jouan CR 412 Centrifuge

This unit was removed from a university where it was surplus to requirement.

This item is in reasonably good cosmetic condition.

It powers on, but the button functions are unresponsive to the unit, therefore unable to conduct any testing.

The lid opened with manual emergency release.

It is sold as Spares/Repairs.

Includes the following:

2x Swinging Buckets:

Part no: 11174154

Volume: 450ml

Bucket Vial Adaptor Inserts:

1x set 7x 50ml vials - RED

1x set of 7x 15ml / 16x 6ml vials - BROWN

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

ITEM-41652

Jouan Refrigerated Centrifuge Model - CR412 with 4750RPM Rotor & Inserts Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted.

Therefore, this item is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Distillation Chiller B-741 Lab Spares/Repairs

ITEM-41104

Buchi Distillation Chiller B-741

This was removed from a university lab where it was surplus to requirements.

The unit did not power up in tested and we were informed that it was out of order and non-function prior to collecting it.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Buchi Distillation Chiller B-741 Lab

ITEM-41489

Buchi Distillation Chiller B-741 Lab

This item was removed from a university where it was surplus to requirement.

It powers on but is in poor cosmetic condition, we are unable to test it further at our facility.

The unit is sold for spares/repairs as we believe it will need quite a bit of remedial action to get it working properly.

It is missing one of is feet.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Fisher Scientific Isotemp Recirculating Chiller Lab Spares/Repairs

ITEM-41106

Fisher Scientific Isotemp Recirculating Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up but the lab confirmed it was not pumping correctly, and therefore not cooling correctly prior to collection.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Miele Professional G 7883 Lab Glassware Washer Spares/Repairs

ITEM-35868

Miele Professional G 7883 Lab Glassware Washer

The unit did not power up in testing. It is sold for spares/repairs.

It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Shandon Excelsior Tissue Processor Lab SPares/Repair

ITEM-39981

This Thermo Electron Corporation Shandon Excelsior Tissue Processor was removed from a university lab where it was surplus to requirements.

The unit powered up initially but quickly faded.

It has a suspected PSU fault.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor Spares/Repair Lab

ITEM-40950

Jouan SA GR 20 22 Refrigerated Centrifuge with AG 290.G Rotor

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, but the display shows "Lid Unlocked" while the lid remains stuck most of the time, occasionally opening after multiple attempts.

Additionally, the display indicates "Tachometer Failure."

When set to 2000g RCF, it does not reach the target speed, instead decelerating after approximately 500g. The deceleration from 500g to 0g takes approximately six minutes.

Due to the faults listed above, this centrifuge is listed as Spares/Repair.

Includes:

1x Jouan AG 290.G Swing Bucket Rotor
4x Jouan Swing Buckets (C/N: 11174649, S/N: 0102/03)
1x Box of assorted fixed-angle and swing buckets with no markings, various sizes of test tube adaptors
4x 125 ml Tube Adaptors
4x Support Feet

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 160 CO2 Laborator Incubator Lab

ITEM-39007

Binder ED23 Drying And Heating Laboratory Oven

This was removed from a university lab where it was surplus to requirements.

The item powers on but the displays "error" after a short whilethat prevents the item from being tested.

It is in very good cosmetic condition.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MIR-153 Refrigerated Laboratory Incubator Lab Spares/Repairs

ITEM-39069

Sanyo MIR-153 Cooling Laboratory Incubator Lab

This item was removed from a university lab where it was surplus to requirements.

It is in reasonably poor cosmetic condition with noticeable damage.

Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Carbolite CTF 12/100 Tube Furnace Lab Spares/Repairs

ITEM-36639

Carbolite CTF 12/100 Tube Furnace

This was removed from a university lab where it was surplus to requirements.

Although it's in good cosmetic condition, the item is being sold as Spares or Repairs since it does not turn on.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Dimension BST 1200 3D Printer Spares/Repairs

ITEM-39272

Dimension BST 1200 3D Printer

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition, both internally and externally.

It does not power on, therefore it's sold as Spares or Repairs.

The main board, junction board, CCD board, lighting board, I/F board, laser board, and panel board all have been disassembled from the main unit.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i Incubator Lab Spares/Repairs

ITEM-37320

Thermo Scientific Heracell 150i Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5800E C02 Incubator Lab Spares/Repairs

ITEM-39096

Nuaire 5800E C02 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Nuaire NU-5810E CO2 Incubator Lab Spares/Repairs

ITEM-39095

Nuaire 5810E CO2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Infors AG HT Ecotron Shaking Incubator Lab Spares/Repairs

ITEM-39829

Infors AG HT Ecotron Shaking Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator is in reasonably good cosmetic condition, both internally and externally.

It powers on successfully, with display screens, buttons, and interior lights in working order. While the shaker motor can be heard, there is no movement from the platform, which may indicate a broken or slipped belt.

The temperature functionality is in good working order (thermometer not included).

Specifications:

Platform Dimensions (W×D): 42×42 cm
Model: HT Ecotron
Serial No.: 109025

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

BD FACSCalibur Flow Cytometer + Transformer Lab

ITEM-45456

"Attributes not completes."

BD FACSCalibur Flow Cytometer Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition but has not been in use for many years; therefore, it likely is not in working order.

Due to restrictions on operating lasers at our site, we are unable to test the item.

As we are unable to test the item and its likely non-functional status, it is listed as Spares/Repair.

The power supply is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet - Damaged Base Lab

ITEM-39859

Esco NordicSafe NC2 - 4L8 Class 2 Safety Cabinet

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition, but is listed as Spares/Repair due to damage to the base of the cabinet.

Model: NordicSafe NC2 - 4L8

Serial: NC2-4L8-2013-80689

£ 500.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - Blue

ITEM-39749

Lab-Bubble Still Air PCR Enclosure - Blue

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

LEEC Touch 50 Culture Safe CO2 Incubator Lab Spares/Repairs

ITEM-38889

LEEC Touch 50 Culture Safe CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on. (Thermometer not included)

The CO2 sensor has failed on testing, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 Lab Spares/Repairs

ITEM-39052

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

MSE Mistral 3000i Benchtop Centrifuge Lab Spares/Repairs

ITEM-37436

MSE Mistral 3000i Benchtop Centrifuge

This was removed from a university lab where it was surplus to requirements.

Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature.

Additionally included:

1 x MSE Rotor

Model BS4402

7 x Swinging Buckets:

Volume: 250ml

Bucket Adaptors:

6 x Blue

Holds: 12x 5ml Vials

7 x Grey

Holds: 4 x 12ml Vials

8 x MSE Brown

Holds: 1 x 100ml VIals

1 x Hex Key Locking Bar

£ 500.00 (ex. VAT) 1 in stock

Buchi Vac V-500 Diaphragm Vacuum Laboratory Pump Lab

ITEM-24903

Buchi Vac V-500 Diaphragm Vacuum Laboratory Pump Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, powers on, and draws a vacuum, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab Spares/Repairs

ITEM-39999

Sanyo MCO-18AIC CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included).

The current CO2 Pump failed during testing and will require a new one to be fitted.

Therefore, it is listed as Spares/Repair.

Features 3 Shelves.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Kendro Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor Lab Spares/Repair

ITEM-26006

Heraeus Multifuge 3 S-R with 4600rpm Swing Bucket Rotor

This was removed from a university lab where it was surplus to requirements.

The unit powers up but shows error 21 - wiring fault.

It is sold for spares/repairs.

A 4600rpm rotor is included.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CB 150 CO2 Incubator Lab Spares/Repairs

ITEM-40989

Binder CB 150 CO2 Incubator

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

This item does not power on, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Incubator CB 150 Lab Spares/Repairs

ITEM-39061

Binder CO2 Incubator CB 150

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on. (Thermometer not included)

This item does not have a CO2 fitting attached, therefore we are unable to test the CO2 function. The fan chamber is also noisy.

Due to this lack of testing, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator Model CB 150 Lab Spares/Repairs

ITEM-38060

This was removed from a university lab where it was surplus to requirements

The unit powers up and works but has a faulty CO2 sensor.

It is sold for spares/repairs.

£ 500.00 (ex. VAT) 1 in stock

Jouan B4i Benchtop Centrifuge w/ S40 Rotor Lab

ITEM-45413

Jouan B4i Benchtop Centrifuge with S40 Rotor

This item was removed from a university where it was surplus to requirements.

The centrifuge was successfully run for 60 minutes at 4,000rpm, the maximum speed recommended for a swing-out rotor on this unit.

It is in fair cosmetic condition, showing signs of general use.

Includes:

S40 Swinging bucket rotor with 4 buckets
4 additional buckets
12 x bucket inserts

Specifications:

Model: B4i
Serial No.: 30202056
Maximum RPM: 14,000 (unit); 4,300 (rotor)

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo MDF-U73V Ultra Low Temperature Freezer Spares/Repairs Lab

ITEM-35616

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

This item is in good cosmetic condition both internally and externally.

When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Heraeus Biofuge 22R Centrifuge Lab Spares/Repairs

ITEM-35675

This Heraeus Biofuge 22R Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but does not run. We removed the front panel to investigate and at least two relays are sparking quite badly.

It is in good cosmetic condition with marks from use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Amersham Biosciences AKTA Prime FPLC System Lab

ITEM-36304

Amersham Biosciences AKTA Prime

This was removed from a university lab where it was surplus to requirements.

The unit was serviced but failed the service. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 240i CO2 Incubator Lab Spares/Repairs

ITEM-31726

Thermo Scientific Heracell 240i CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit has no screen and required a new CO2 sensor prior to the screen being removed.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer Lab

ITEM-41127

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition.

The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wallac 1450 Microbeta Trilux Liquid Scintillation -19994 Lab Spares/Repairs

ITEM-19994

Wallac 1450 Microbeta Trilux Liquid Scintillation

The system tripped ad RCD on the main supply during testing. The internal PSU has shorted.

It is sold for spares/repairs.

Included are;

Microbeta V4.6 Protocol Disk

1450 Microbeta Trilux Main Program 4.6

Comes with:-

Belinea 15" Monitor - Powers on

HP Keyboard

Logitech Mouse

HP Vectra VL5/166 MMX Series 5 DT - PC Does not power on. HDD removed. We left it with the system in case it has useful PCI cards.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sanyo Stability Chamber PSC022.AHB.C

ITEM-36816

This was removed from a university lab where ti was surplus to requirements.

The unit does not power up. It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Beckman Coulter BioMek FXP Laboratory Automation Workstation System Faulty

ITEM-39234

Beckman Coulter BioMek FXP Laboratory Automation Workstation System

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, although due to the following error; "D1 axis error:pump failed to send boot request. (0512)."

we are unable to test it further, and it is listed as Spares/Repair. We suspect the tip loader is faulty.

This error prevents the system from connecting to the software.

This system also includes the following:

Beckman Coulter Accuframe
Thomas 669BESUU44TFE Pump
BioTek Valve Module
All relevant manuals and guides
Sami WorkStation EX Software 4.0
Software setup guide
2 x 96 well tip holders with all tips present
2 x light curtain test rods
Filter regulator NAW2000-N02D-C
2 x boxes of spare parts and replacement parts
9 x bottles
pipes and connectors for bottles
PC + Monitor
Keyboard
Microscan MS3

All Products

Filters