Airwolf 3D NW3D HDX 3-D Printer Lab

This item was removed from a university where it was surplus to requirement.

The back panel is missing and, the wires are exposed, resulting in a visual PAT fail.

Due to the condition stated above, this item is listed as Spares/Repair.

Also included are the following:

• Power lead
• Data cable

Scanna ScanMax 225 Mail Room Security X-Ray Machine Model - SMB225D2G20

This was removed from a university lab where it was surplus to requirements.

The unit powered up but we were unable to get the monitor to communicate with the onboard PC. It was not tested further.

It seems to have some power issues involving the onboard UPS.

Therefore, it is listed as Spares/Repair.

It is in good cosmetic condition with only minor marks from use. It has a manual included with it.

Inside dimensions - D56.5 W42 H54cm

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm

This was removed from a university lab where it was surplus to requirements.

The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

Tuttnauer 5050 ELV-D 110L Laboratory Autoclave Spares/Repair

This item was removed from a university where it was surplus to requirement.

This item is in poor cosmetic condition and is sold as Spares/Repair.

The lid of the item is not fixed, and the internal pump has been removed.

This was removed from a university lab where it was surplus to requirements.

The unit powers up but a warning light flashes. It was not tested further.

It is sold for spares/repairs

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university lab where it was surplus to requirements.

The microscope focus motor/Z-Drive has been removed from this unit.

We have removed the microscope focus motor/Z-Drive from this system. It is sold for spares/repairs.

Included in the system are;

1x GE IN Cell Analyzer 1000:

Dims: L85cm W70cm H70cm

The unit is in good cosmetic condition.

When connected up to the power supply we could not hear the unit power on.

Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up.

1x GE IN Cell Analyser 1000 Kinetic OZ Enabled

Model No. 28-4051-29

System No. 1316043

The unit powers on and is in good cosmetic condition.

The fans are working, they can be heard powering up immediately once the unit is powered on.

1x GE IN Cell Analyser 1000 ENDPNT OZ Enabled

Model No. 28-4051-28

System No. 1358008

The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it.

The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed.

EMKA Keys:

Model 2233X

2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled

2x keys for the GE IN Cell Analyser Kinetic OZ Enabled

All 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units.

We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other.

1x Optigrid Light Imaging System:

Model QIOPTIQ

The unit powers on and is in good cosmetic condition.

1x Xenon ARC Lamp Power supply w 2x keys:

Type 6

Part No. 56409187

The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly.

Keys:

model No. 901

The units are in good cosmetic condition

2x MVP Series Power supplies. ( 1x in each rack unit)

Model Nos. MP8-3Q-1L-00

Both units power on and are in good cosmetic condition. There is dust around and on both units from general use.

1x Hamilton power supply

Model No. 231352/00

The unit powered on and is in good cosmetic condition.

2x APC rack PDU

The units power on and are in good cosmetic condition.

1x GE cO2 Controller:

Ser No. 1352436

The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit.

2x Hewlett Packard PC's: HP workstation xw6200:

The units both power on and are in good cosmetic condition.

There is some dust around the units from general use.

Programs on PC:

•Overlord 2

Version 2.1.0.0

•IN Cell Analyser 1000 3.5

•IN Cell Analyser 1000 3.6

The program is password protected and we could not get past this window to access other parts of the program.

'Shutter Counter 1984048'.

3 x Low Voltage Computer Cables:

•28-4060-63 Umbellcal Axis 0734

•28-4060-66 0647

•28-4060-68 Umbellcal Hamilton 0738

1x Xenon lamp Bulb:

Model OSRAM XBO 100W OFR

The box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.

Whatman/Parker Balston UHP Nitrogen Generator Model 76-94-220

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however, the previous owner has stated it is not in working order.

GEM Indirect Calorimeter ISGEM319 Spares/Repair Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonable cosmetic condition. The casing is loose and required securing with a screw, suggesting it may have been opened previously.

The item powers on, but no further testing has been conducted. The previous owner reported it as non-functional, though the specific fault is unknown.

Therefore, it is listed as Spares/Repair.

Includes:

• Pipe fittings
• Grey connector box for the pipe system

YSI 2300 230V STAT Plus Glucose Lactate Analyser Spares/Repair Lab

This item was removed from a university lab where it was surplus to requirement.

It powers on and is in reasonably good cosmetic condition, however, there is a missing side panel.

The previous owner had stated it is not in working order, though the reason is unknown.

Therefore, it is listed as Spares/Repair.

Link Analytical eXL Model 1100-012 System

This system was removed from a university laboratory where it was surplus to requirements.

The main eXL unit initially powered on, supplied power to the monitor, and displayed startup errors (see photos), but the keyboard and mouse were unresponsive. Upon restarting, the monitor and indicator lights did not power up, although internal computer activity could still be heard. Further attempts to power cycle the system were unsuccessful.

Therefore, this system is listed as Spares/Repair.

It is in good overall cosmetic condition.

The system comprises the following:

• Link Analytical eXL
• Model: 1100-012
• Serial No.: 2917
• Link Analytical Monitor
• Model: CLR 1401
• Serial No.: 2665
• Link Analytical Keyboard
• Model: 1487
• Serial No.: 2763
• Link Analytical Mouse and Mouse Mat
• Link Analytical Printer (Epson LQ-500)
• Model: P78PA
• Serial No.: T0011258
• *Note: Printer would fail PAT due to a missing rear cover
• (Box of printer paper included)

Included Manuals:

• Link Analytical eXL System Service Manual
• Link Analytical Disk, Tape & File Sequel, Sequences, Display & Hard Copy, Genie, Video Frame Grabber
• Link Analytical Getting Started – X-Ray Analyser, System Manager, RTS-2/FLS, Auto
• Link Analytical Computer System & Electron Diffraction Pattern Analysis
• Link Analytical Analysis & Imaging
• Link Analytical Quantitative Mapping Operators Manual

Accessories and Additional Parts:

• Box of 10 floppy disks
• Labelled black 'X-Ray' cables and a grey monitor cable (collected as connected)
• 2 x Tracor Northern IPP Series II X-Ray Analyzer Operator Manuals
• 3 x Digital software disks (in blue cases – large format)
• GEMS Sensor – P/N 197093-RS (white)
• Unidentified round metal part
• Boxed metal piece labelled "Scintillator" (assy – ME 0084)
• Metal part tagged "X-Ray Source XA2-57"
• Metal part with Watec WAT-902B CCD Camera and:
• Objective lens: M Plan APO 10 SB 0.23 ∞/0 SLWD 39
• Metal piece with part number AG61-113 etched at the base
• Orange cable marked "AML J011 034"
• Black light source
• Various other cables (not compatible with the eXL)

Eppendorf 5810R BenchTop Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in good cosmetic condition and powers on.

During testing, it failed to reach its maximum specified temperature of 40ºC.

Due to these issues stated above, this centrifuge is being sold as spares or repairs.

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

• Sorvall HB-6 Swinging-Bucket Centrifuge Rotor 6 x 50ml P/N 11850 Lab
• DACS 8 Channel (Eightch) Volume Controller
• Lebow Assoc. Inc Load Cell Model no. 3132 2000lbs Lab
• AID EliSpot FluoroSpot Reader System Model ELR02 Lab
• AID EliSpot FluoroSpot Reader System HR Lab
• FluidX XTR-96 96 Tube Rack Scanner & Software Lab
• GLO Low-Speed Benchtop Laboratory Centrifuge GLO-GT416 with 270rcf Rotor Lab
• NPI Stimulus Isolation Unit Version - ISO-STIM 01D Lab
• ZEISS ECU Modular Microscope Controller - Power-IF, HPSC1, S/C-IF
• Berthold Technologies Lumat LB 9507 Tube Luminometer Lab
• Severn Analytical SA 6500 UV/VIS Absorbance Detector Lab
• Prior England Epic MEL 1 Micromanipulator Lab
• New Brunswick Scientific Model G-2 Gyrotory Laboratory Shaker Lab
• Thermo Scientific Cellject Duo Electroporator HCJD0137 Lab Spares/Repairs
• X2 ErgoOne® FAST Pipette ControllerS
• Integra PipetBoy
• Integra Vacusafe (158 3XX) With 1 x Integra Vacuboy Pipette
• Elga Purelab Ultra Genetic MK2 Benchtop Water Purifier Lab
• Hewlett Packard 16700A Logic Analysis System
• Hellma Semi-Micro Cuvettes, 104-QS, 10 mm Layer Thickness
• MJ Research PTC-225 Pelter Thermal Cycler PCR DNA Unit
• Edwards 2 Two Stage Pump Lab Spares/Repairs
• UniFlows Degasys DG-2410 Degasser
• Megger PAT Tester Model 32 Lab
• Heraeus 3336 Rotor
• Unknown Furnace
• Mettler Toledo PB3002 1DP Balance Lab
• Gould 20Ms/Sec 20 MHz Oscilloscope (DSO) 1604 Lab
• Ernst Leitz Wetzlar 307-143.004

New Brunswick Scientific ULT Freezer Model-U725 -86 Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it did not drop in temperature.

Therefore, it is listed as Spares/Repair.

Liebherr GKPv 6522 Glass Fronted Fridge - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however, during testing it failed to cool beyond 13ºc when set to 1ºc.

Therefore, it is listed as Spares/Repair.

Thermo Scientific Cytomat 24 C-GR Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, however, the unit has a Com port error when connected to Cytomat software.

The internal screen within the door (used for the stacker system) does not power on, and there appear to be faults affecting the stacker system overall.

As such, this item is listed as spares or repair.

Please note:  Software not included.

Thermo Scientific Cytomat 24 C Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The unit connects via COM port when linked to a PC running Cytomat software. (not included)

However, it does not execute commands and displays errors within the software, indicating potential internal faults.

As such, this item is listed as spares or repair.

Molecular Dynamics Typhoon Trio Internal Components – Spare Parts from 2 Machines

These items were removed from university laboratories where they were surplus to requirements.

This listing includes internal components from two Molecular Dynamics Typhoon Trio Imagers. The systems are not complete: one internal is missing the main circuit boards, while the other is missing the laser source.

Additional components may also be missing. Cables have been cut.

Includes:

• Melles Griot Laser Class 3B
• Model: 85-BCB-020-049
• Serial No.: 1447K
• Year: 2008

This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

ITEM-10245 Thermo Scientific Hybaid HB-OV-BM Shake 'N' Stack Bottles (Lot of 8)

ITEM-06121 6 x Hybaid Tubes

ITEM-09662 Multiple Laboratory Equipment

ITEM-44682 Bio-Rad PowerPac Basic

ITEM-14753 Thurlby Thandar TG215 2MHz Function Generator Lab

ITEM-24925 Electromantle MA Solid State Stirrer Heating Mantle EMA0500/CEB MK4 lab

ITEM-11207 Oltronix Series Resistor Unit 11S 200k-4RVM MK2 Power Supply

ITEM-16460 Atto AE-6200 Slab Chamber for Gel Electrophoresis Lab

ITEM-44683 Blue Pump

ITEM-18912 Edwards Inlet Desiccant Trap Model ITD 20 Lab

ITEM-44684 Media Bottle Kimax ISO, GL45, 1000 ml, Blue PP Cap - 10 per box

ITEM-26043 Sirius D-PAS Dip Probe for Absorption Spectroscopy Lab Spares/Repairs

ITEM-44685 Moser Arco Clippers

ITEM-26843 HWM Transmitter

ITEM-15483 Waters P/N 201000193 Fluorescence Detector Performance FLR Lamp Lab HPLC

ITEM-27169 Opened box of Chromatography paper

ITEM-03760 Salon Systems Just Wax Heaters x 6

ITEM-11774 Rio Slim Gym MT100-10 Professional 10 Pad Ultimate Body Toner

ITEM-01700 Sorisa MC-01 Portable Galvanic Current Isometric Device

ITEM-07335 Morgan 509 Cardiac Monitor Medical Laboratory Lab Equipment

ITEM-26820 Morgan 509 Cardiac Monitor

ITEM-26571 Box of mixed Manuals

ITEM-09419 Baxter Edwards Critical-Care VGS1 Vigilance Monitor Lab

ITEM-17626 Eppendorf 5424/5424R Centrifuge Rotor - 24 x 3.75g - 15000rpm - Lab

ITEM-23229 Quantum Personal Oxygen Monitor /Misc items

ITEM-22223 BP-2000 Analysis Interconnect cable

ITEM-26826 Hellige Cardiotest EK1 & Accessories

ITEM-26575 Box of mixed manuals

ITEM-26783 VTS Unit

ITEM-30141 Quantum oxygen deficiency monitor & alarm

ITEM-25827 Pickering Laboratories CHX 650

ITEM-25837 BOC Carbon Dioxide Monitor & Alarm

ITEM-25865 SkyTronic DC Regulated PSU

ITEM-17772 Accoson Pre Measured Adult Blood Pressure Machine Sphygmomanometer Lab

ITEM-25838 Boxed Nitrate Comb.ISE/BNC

ITEM-25870 Ammonium Ion Selective Electrode

ITEM-25839 Boxed Conductivity Meter

ITEM-25871 Jenway Conductivity Meter Electrode

ITEM-25855 Bibby 3-in-1 Stick Meter

ITEM-25856 ELE stick meter

ITEM-27237 APC Back-UPS CS 650

ITEM-25854 Stick Meter in case

ITEM-25849 Boxed potassium ion selective electrode

ITEM-27641 Powervar UPS

ITEM-26790 RS Line Voltage Conditioner

ITEM-16645 UPS Riello Model UST103033XRU Uninterruptable Power Supply Spares

ITEM-26921 APC Back-UPS RS 500

ITEM-27218 APC Smart UPS 700

ITEM-25862 Evans Electroselenium AC Motor

ITEM-25848 Tecator 1022 Hot Plate

ITEM-25847 Clifton Water Bath

ITEM-25846 Clifton Water Bath

ITEM-25828 Tecator 1022 Hot Plate

ITEM-25822 UV Light

ITEM-25843 Regal EXPERT 320

ITEM-44686 Belkin UPS

ITEM-44687 Shrewsbury Interferential unit

ITEM-44688 SmartPro UPS

ITEM-25872 Whatman PHA 300

Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but has not been tested on site due to the service report attached stating;

Rotor lock: Seized, cannot remove rotor

No reported problems Service and check as above Unit is old

Note 6: door seal has shrunk and will not go back into place

Note 9: chamber is corroded due to substance.

Note 10: gas struts have failed, lid is heavy and can fall.

Note 12: drive shaft housing corroded.

Therefore, it is listed as Spares/Repair.

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

• Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

• 3 shelves (47 x 43 cm)
• Manuals
• Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

Helmer iLF105-GX Freezer Spares/Repair

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, however during testing it was set to its minimum temperature of -20ºc and it failed to cool, instead rising in temperature from ambient.

Therefore, it is listed as Spares/Repair.

Systec DB-45 Autoclave Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.