All Products

£ 750.00 (ex. VAT) 1 in stock

Thermo Scientific Orion VersaStar Pro Electrochemistry Meter w/ SNBC Printer

ITEM-49900

Thermo Scientific Orion VersaStar Pro Electrochemistry Meter with SNBC Printer

This system was removed from a facility where it was surplus to requirements.

Both units are in good cosmetic condition and power on, though the probes may require replacement.

Thermo Scientific Orion VersaStar Pro Advanced Electrochemistry Meter

S/N: 12527

SNBC BTP-M300 Receipt Printer

P/N: BTP-M300BSUBDLYE
S/N: 21036101612

£ 750.00 (ex. VAT) 1 in stock

Jun-Air Compressor Model 12-40

ITEM-43051

Jun-Air Compressor Model 12-40

This item was removed from a facility where it was surplus to requirement.

It powers on and is in very good condition with minimal wear. The unit was only powered on briefly, as the oil had been expelled. Therefore, no further testing was carried out.

Specifications:

Pressure: 12.2 bar
Minimum Operating Temperature: 10°C
Maximum Operating Temperature: 50°C

£ 750.00 (ex. VAT) 1 in stock

Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor Lab

ITEM-31255

This Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor was removed from a university lab where it was surplus to requirements.

The system powers up and is in reasonably good cosmetic condition with minor marks from previous use.

Main unit - L70 W58 H77cm

Frame - L68 W54 H57cm

£ 750.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP Deepwell Plate Rotor 3700 RPM Lab

ITEM-51837

Eppendorf A-2-DWP Deepwell Plate Rotor 3700 RPM Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Numatic Floor Scrubber/Dryer Model TT 1535S

ITEM-54241

Numatic Floor Scrubber/Dryer Model TT 1535S

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 750.00 (ex. VAT) 1 in stock

Copley DIS 6000 Dissolution Tester Lab

ITEM-50196

Copley DIS 6000 Dissolution Tester

This item was removed from a facility where it was surplus to requirements.

The unit powers on, the display lights up, and all buttons respond correctly. Speed control was tested at 50 RPM and 200 RPM, with both settings running smoothly and maintaining consistent speed. All liquid vessels present hold water without leaks, and the drain tap functions correctly. The large water vessel has visible staining.

The temperature function could not be tested as the heater is not included. No further testing has been carried out.

Included Components:

7 stirred test vessel holders
5 × 1000 ml glass vessels
6 metal paddles (without attachments)
Bag of additional accessories

Model: DIS 6000

£ 750.00 (ex. VAT) 1 in stock

ALA Scientific Instruments BPS-8 Valve Control System Lab

ITEM-39794

This ALA Scientific Instruments BPS-8 Valve Control System was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers up, we are unable to test further at our facility.

This item includes the power supply.

£ 750.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

ITEM-47673

Sanyo CO2 Incubator MCO-18AIC (UV) Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

ITEM-46523

Sanyo MCO-18AIC(UV) CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in reasonably poor cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Roche Diagnostics Corporation LightTyper 96 Genotype Analyzer Lab

ITEM-36193

This Roche Diagnostics Corporation LightTyper 96 Genotype Analyzer was removed from a university lab where it was surplus to requirements

This item is in good cosmetic condition and powers up, but we are unable to test it further.

£ 750.00 (ex. VAT) 1 in stock

RMC MT-7 Microtome with Accessories Set Lab

ITEM-36251

RMC MT-7 Microtome with Accessories Set

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is mechanically in good working order.

It is in good cosmetic condition with minor marks.

It also includes various unnamed accessories.

These include bracket fixings, allen keys, screws, fuses, safety guards, eyepieces and other items we are unable to identify.

Also included is a dust cover and operational manuals x 3.

£ 750.00 (ex. VAT) 1 in stock

Berthold Technologies Mithras LB 940 Microplate Reader Lab

ITEM-31458

Berthold Technologies Mithras LB 940 Microplate Reader

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further without the software.

It is in good cosmetic condition with minor marks.

£ 750.00 (ex. VAT) 1 in stock

Savant Universal Vacuum System UVS400A with VaporNet Lab

ITEM-34906

Savant Universal -UVS400A- Vacuum

Model: UVS400A

SN: UVS400A-9J430168-4

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It was tested with a digital thermometer (not included).

It is in reasonable cosmetic condition, with marks from use.

£ 750.00 (ex. VAT) 1 in stock

Leitz Diavert Inverted Microscope w/ 3 x Objectives Lab

ITEM-36652

Leitz Diavert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

Included are;

2x Eyepieces:

PERIPLAN 10 x Leitz Wetzlar Germany

Objectives:

Phaco 1 L32 /0,40 170/-

Phaco 1 10/0.25 160/-

£ 750.00 (ex. VAT) 1 in stock

Heraeus Megafuge 1.0R Refrigerated Centrifuge With 2800RPM Rotor

ITEM-39094

Heraeus Megafuge 1.0R Refrigerated Centrifuge

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order. The refrigeration was tested at 4˚C and worked well.

It is in good cosmetic condition with marks from use.

Rotor max RPM- 2800

The rotor holds 24 x 15ml tubes

£ 750.00 (ex. VAT) 1 in stock

Panlab Harvard Apparatus Load Cell Coupler LE 111 & Shocker LE 100-26 Lab

ITEM-39742

Panlab Harvard Apparatus Load Cell Coupler LE 111 & Shocker LE 100-26

These units were removed from a university lab where they were surplus to requirements.

Both units power up but have not been tested further. They are in good cosmetic condition with minor marks.

Included are;

Panlab Harvard Apparatus Load Cell Coupler LE 111

Model: Load Cell Coupler LE 111

Serial#: 775509

Panlab Harvard Apparatus Shocker LE 100-26

Model: Shocker LE 100-26

Serial#: 775609

£ 750.00 (ex. VAT) 1 in stock

Nuaire DH Autoflow NU-5500E CO2 Air-Jacketed Incubator Lab

ITEM-49731

Nuaire DH Autoflow CO2 Air-Jacketed Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

It was last serviced in December 2024.

£ 750.00 (ex. VAT) 1 in stock

Prior PX033 Compound Microscope W/ PaxCam EDU

ITEM-49235

Prior PX033 Compound Microscope with PaxCam EDU

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition.

The PaxCam EDU camera could not be tested as the power supply unit is not

included.

Includes:

Dust cover
Spare fuses
PaxCam EDU PX-CM-EDU (Serial No. 7020053)
2 × WF 10x/22 Eyepieces
E Plan 4x/0.10 Objective
E Plan 10x/0.25 Objective
E Plan 40x/0.65 Objective
E Plan 100x/1.25 Oil Objective
USB cable for PaxCam
Operation instructions

£ 750.00 (ex. VAT) 1 in stock

Soft Glass Drop Tower Access Platform / Fibre Drawing Furnace Operator Stand

ITEM-55065

Soft Glass Tower Access Platform / Fibre Drawing Furnace Operator Stand

This item was removed from a facility where it was surplus to requirement.

Previously used as part of a soft glass fibre drawing tower setup alongside a low temperature furnace for drawing soft glass optical fibres.

This unit provides a stable elevated working position for loading and aligning glass preforms into vertically mounted furnaces.

The structure is a heavy-duty steel access platform with integrated anti-slip steps and handrail, designed for safe operator access at height during fibre drawing processes.

£ 750.00 (ex. VAT) 1 in stock

Purite HP160 BP/IT L300255 Water Purification System w/ Accessories Lab

ITEM-54548

Purite L300255 Water Purification System w/ Accessories Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Inlcudes;

Pretreat PT8 (EXP: 10.19)
Puripac PP8 (EXP:04.22)
HP700 Deioniser (PN: L991024)

£ 750.00 (ex. VAT) 1 in stock

Sigma 1-14 Benchtop Centrifuge w/ Rotor 14800 RPM

ITEM-52707

Sigma 1-14 Benchtop Centrifuge with Rotor – 14,800 RPM

This item was removed from a facility where it was surplus to requirements.

The unit is in good cosmetic condition and is in good working order.

Please note that a high-pitched whine becomes noticeable when the unit is operated above approximately 10,000 RPM.

£ 750.00 (ex. VAT) 1 in stock

Taylor Hobson Model K Pantograph Engraver 110.902.324

ITEM-48758

Taylor Hobson Model K Pantograph Engraver 110.902.324

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and appears to be in good working order.

There are various marks and signs of use.

£ 750.00 (ex. VAT) 1 in stock

Heraeus Laminair HV Mini Laminar Flow Workstation Lab

ITEM-54719

Heraeus Laminair HV Mini Laminar Flow Workstation Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

NEW ITEM

£ 750.00 (ex. VAT) 4 in stock

Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab

ITEM-52663

Mettler Toledo E4 Pipette Multi E8-1200XLS+ Lab

This item was removed from a facility where it was surplus to requirement.

It is brand new in its original packaging.

£ 750.00 (ex. VAT) 1 in stock

Grant XUB5 Digital Ultrasonic Water Bath Lab

ITEM-51360

Grant XUB5 Digital Ultrasonic Water Bath

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 750.00 (ex. VAT) 1 in stock

Job Lot of 10 x Brunel SP27 Compound Microscopes Lab

ITEM-48559

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

All microscopes are in good cosmetic condition.

Each microscope includes;

1 x Carry Case

4 x Objectives:

4/0.10 160/-
10/0.25 160/-
40/0.65 160/0.17
100/1.25oil 160/0.17

£ 750.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab

ITEM-50356

Beckman Coulter Biomek 2000 Laboratory Automation Workstation

This item was removed from a laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition.

Please note: The plastic trays within the working area show signs of use and appear to be slightly warped.

The item powers on, however we are unable to test it further at our facility.

£ 750.00 (ex. VAT) 1 in stock

Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve

ITEM-37794

Limpsfield LPN1/440 Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The item details are as follows:

Model LPN1/440

Serial No. 01191

Manufactured 8.08.14

Output 440 KW/hr

Dungs gas valve DMV-DLE 520/11

Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12473, 12467

Hanning Elektro-Werke fan motor type OE7D2B-108 240v, 0.55KW

1.5" gas inlet pipe

£ 750.00 (ex. VAT) 1 in stock

Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank Lab

ITEM-34946

Thermo Forma Model 8031 Liquid Nitrogen Dewar Tank

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested at our facility.

8 x Storage Racks - 12.5 x 8 x 48.5cm

9 sections per pack - 12.5 x 7.5cm

£ 750.00 (ex. VAT) 1 in stock

Applied Biosciences 7900HT Fast Real-Time PCR Complete System Lab

ITEM-41491

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

16A 1Phase cable

£ 750.00 (ex. VAT) 1 in stock

UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05 Lab

ITEM-31863

UVP UV/White Transilluminator Imaging System & Camera TMW-20 PN 95-0145-05

This item was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use.

It is in full working order.

Included with it is;

1x Canon Powershot G10 Digital Camera

S/N: 7188100663

£ 750.00 (ex. VAT) 1 in stock

WATERS MECHANICAL PART FOR XEVO TQ MS EPC 4285001DC1 Lab

ITEM-38448

This WATERS MECHANICAL PART FOR XEVO TQ MS EPC 4285001DC1 was removed from a university lab where it was surplus to requirements.

The item is in good cosmetic condition but due to the power supply not being included, we are unable to test, therefore the item is sold as Spares or Repairs.

Power supply not included.

£ 750.00 (ex. VAT) 1 in stock

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives

ITEM-39731

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

It is made up of the following modules;

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope

Model: Axioskop

Serial# : 23 7412

Carl Zeiss Microscope Power Supply VHW 50f-2b

Model: VHW 50f-2b

Serial#: 39 26 42

Lamp hours: 254.24

Carl Zeiss NAG 2, 12V 100W Stab Power Supply

Model: NAG 2 12V 100W

Serial#: 39 25 85

Carl Zeiss HBO 50 Lamp housing

Model: HBO 50

Serial#: 44 72 20

Carl Zeiss 12V 100W Halogen HAL Lamphouse

Model: 12V 100W Halogen HAL

Serial#: 44 72 18

Pl 10x/20 Eyepiece x 2

Serial#: 44 40 32

The following Objectives:

Zeiss Plan-NEOFLUAR

2,5x/0,075 ∞/-

Serial#: 44 03 10

Zeiss ACHROPLAN

40x/0,65 ∞/0,17

Serial#: 44 00 50

Olympus SPlan20PL

0,46 160/0,17

Serial#: 80 63 58

Zeiss ACHROPLAN

10x/0,25 Ph1 ∞/-

Serial#: 44 00 31

Zeiss ACHROSTIGMAT

5x/0,12 ∞/-

Serial#: 44 01 20

£ 750.00 (ex. VAT) 1 in stock

Integrated Technologies G-Sealer Variable Temperature Sealer S120499-1-A002

ITEM-39840

Integrated Technologies G-Sealer Variable Temperature Sealer S120499-1-A002

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in good cosmetic condition with minor marks.

£ 750.00 (ex. VAT) 1 in stock

Prior Optiscan ES9Z Microscope Stage Controller with CS152Z Module Lab

ITEM-24239

Prior Optiscan ES9Z Microscope Stage Controller with CS152Z

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Included with it are;

1 x Rotary wheel control module with up, down and speed buttons. Model CS152Z Serial No. 36341

1 x 12v power adapter

£ 750.00 (ex. VAT) 1 in stock

BOC Edwards Turbomolecular Pump EXT 255Hi B753-03-000 Lab

ITEM-24459

BOC Edwards Turbomolecular Pump EXT 255Hi B753-03-000

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

£ 750.00 (ex. VAT) 1 in stock

BOC Edwards Turbomolecular Model Pump EXT 255HI B763-03-000

ITEM-24460

BOC Edwards Turbomolecular Model Pump EXT 255HI B763-03-000

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition but has not been tested.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-44771

Sanyo MCO-17AI CO2 Incubator Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

Specifications;

Model: MCO-17AI
Serial#: 90100724

£ 750.00 (ex. VAT) 1 in stock

Corbett Robotics CAS1200 Liquid Handling System

ITEM-45135

Corbett Robotics CAS-1200 Liquid Handling System

This item was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in good cosmetic condition.

Includes:

Manual
Model: CAS-1200

£ 750.00 (ex. VAT) 1 in stock

Scanbur Scantainer Cabinet Model 50-SCNT-1-110 Lab Animal Welfare

ITEM-42844

Scanbur Scantainer Cabinet Model 50-SCNT-1-110

This item was removed from a university laboratory where it was surplus to requirements.

The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.

The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light illuminated when the fan speed was turned to half speed and lower.—likely due to a blocked or saturated inlet filter on the bottom panel.

No further functionality testing was conducted.

Includes:

5 internal shelves (138 x 43cm)
4 lockable castors
Integrated fan system
Flange for optional extraction duct

Model: 50-SCNT-1-110

Cabinet Serial No. 08066

Extractor Serial No. 08079

£ 750.00 (ex. VAT) 1 in stock

Scanbur Scantainer Cabinet Model 50-SCNT-1-110 - Animal Welfare Lab

ITEM-42841

Scanbur Scantainer Cabinet Model 50-SCNT-1-110

This item was removed from a university laboratory where it was surplus to requirements.

The cabinet powers on with the fan running. Airflow is adjustable via the control dial, and air was observed being drawn upwards to the top duct during testing.

The dials display ambient temperature and relative humidity. However, the “Insufficient Flow” warning light remained illuminated even at maximum fan speed—likely due to a blocked or saturated inlet filter on the bottom panel.

No further functionality testing was conducted.

Includes:

5 internal shelves (138 x 43cm)
4 lockable castors
Integrated fan system
Flange for optional extraction duct

Model: 50-SCNT-1-110

Cabinet Serial No.: 08064

Extractor Serial No.: 08075

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-18AIC CO2 Incubator Lab

ITEM-46521

Sanyo MCO-18AIC CO2 Incubator Lab

This item was removed from a facility where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

£ 750.00 (ex. VAT) 1 in stock

Sanyo MCO-17AI CO2 Incubator Lab

ITEM-46522

Sanyo MCO-17AI CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition, although the door handle has snapped off. This does not affect its functionality.

£ 750.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 CO2 Incubator Lab

ITEM-46576

Heraeus Heracell 150 CO2 Incubator

This item was removed from a university where it was surplus to requirements.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition but will require a replacement screw-in type CO2 filter, as the original has a broken end.

The unit was successfully tested using a filter from another incubator.

Model: Heracell 150

£ 750.00 (ex. VAT) 1 in stock

Eppendorf A-2-DWP Swinging Bucket Rotor Lab

ITEM-46180

Eppendorf A-2-DWP Swinging Bucket Rotor Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we have not tested it at our facility.

Specifiactions;

Capacity: 2 x deep-well plates
Max RPM: 3700
Compatible Models: 5804/5804R/5810/5810R

SPARES/REPAIR ITEM

£ 750.00 (ex. VAT) 1 in stock

Perkin Elmer UV/VIS Lambda 40 Spectrometer Lab

ITEM-37946

Perkin Elmer UV/VIS Lambda 40 Spectrometer

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on but is displaying "LAMBDA 40 1.20 BUSY" and failing to proceed past this screen. The problem may be related to the 'Lamp energy attenuator', as indicated in the manual. Further functionality remains untested. Therefore, it is listed as Spares/Repair.

Includes:

1 x Report Builder User's Guide
1 x Installation, Maintenance
1 x Operation and Parameter Description
1 x UV WinLab Operation Guide
1 x UV WinLab Tutorials
1 x UK KinLab Software Guide
Power cable

Model: Lambda 40

£ 750.00 (ex. VAT) 1 in stock

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

ITEM-36247

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

This was removed from a university lab where it was surplus to requirements.

The cabinet contains the following items.

Aerotech A3200 Ndrive CP x 5

Serial#1:577057/7

Serial#2:577057/6

Serial#3:681834/7

Serial#4:681834/8

Serial#5:681834/2

All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.

National Instruments Signal Conditioning Connector Block x 2

Model: SC-2345

Both have stickers on the front of the items

Sicker on item 1: pH Sensor

Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays

There are other small electrical switches and controllers inside.

£ 750.00 (ex. VAT) 1 in stock

Parker Balston 3848 NitroFlow Lab Nitrogen Generator (2017) Lab

ITEM-55576

Parker Balston 3848 NitroFlow Lab Nitrogen Generator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 750.00 (ex. VAT) 1 in stock

Heraeus Heracell 150 Co2 Incubator Lab

ITEM-38196

Heraeus Heracell 150 Co2 Incubator Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition externally but the copper interior has tarnished.

£ 750.00 (ex. VAT) 1 in stock

Jouan VXS 570 Laboratory Deep Freezer -85C Lab ULT Ultra Low Temperature Freezer

ITEM-21171

This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to requirements.

The unit powers up and was tested with a digital thermometer.

It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C.

The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.

All Products

Filters