Hewlett Packard 5890 Series II Plus Gas Chromatograph w/ Hewlett Packard 7673 GC/SFC Injector Lab

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition and powers on. However, when the temperature was tested to its maximum of 325°C, it shut down at 203°C with the error message

"EPPA: SAFETY SHUTDOWN,"

Therefore, it is listed as Spares/Repair.

Furthermore, the included 7673 GC/SFC Injector could not be tested due to the absence of the controller.

Hitachi F-4500 Fluorescence Spectrophotometer System

This item was removed from a university laboratory where it was surplus to requirements.

The Hitachi F-4500 unit does not power on; however, it is in good condition with minimal wear. The previous owner said the PSU had failed.

Due to it not powering on it is listed as Spares/Repair

Includes:

• Vigen Genie P3 500 Computer
• Model: F-4500
• Serial No.: 1163-004
• Software: F-4500 FL_mnu - 2504060-05.

Carl Zeiss LSM 5 Laser Module with 2 Lasos LGK Lasers, Controller, and PSU

This system was removed from a university laboratory where it was surplus to requirements.

The Laser Drive 9600 Series PSU powers on and also successfully powers the Lasos LGK 7812 ML 1 Controller, which runs with the large cooler operational.

We were unable to test the Carl Zeiss LSM 5 Laser Module due to our safety policy surrounding Class III Lasers, but we are told it was faulty.

It is sold for spares/repairs.

In good cosmetic condition.

Includes:

• Carl Zeiss LSM 5 Laser Module
• Serial No.: 850 351
• Year: 1997
• Laser Drive 9600 Series Power Supply
• Model: LGN-7802-4
• Serial No.: 794592
• Lasos LGK 7812 ML 1 Controller
• Manufacturing No.: 334
• Lasos LGK 7628-1 Helium Neon Laser
• Serial No.: 6194
• 15mW, Class 3B, 633nm, Year: 1997
• Lasos LGB 7774 Helium Neon Laser
• Serial No.: 459
• 5mW, Class 3B, 543nm, Year: 1997

Oxford Instruments Nitrogen Cryostat

This item was removed from a university laboratory where it was surplus to requirements.

The item is in physically complete condition but has not been tested. The internal thermometer has been removed, and wiring to the electrical feed through has been broken, affecting its operability.

Therefore, it is listed as Spares/Repair.

Includes:

• Oxford Instruments Nitrogen Cryostat body
• Associated wiring and connectors (incomplete/damaged)

Molspin Nuvo Vibrating Sample Magnetometer - Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition, however the dial is seized, preventing further testing.

Therefore, it is listed as Spares/Repair.

Please note; The previous owner stated it was faulty therefore its possible there are other issues not noted.

Trilec CMDS 100 Magnetizer Slave Unit Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powers on, however the previous client has stated it was faulty, though the fault was not determined,

Therefore, it is listed as Spares/Repair.

Heto Maxi Dry Plus VR Maxi Vacuum Centrifuge Lab

This item was removed from a university lab where it was surplus to requirement.

It is in reasonable condition and powers on, however there's a fault with the lock mechanism that prevents the lid from opening.

Therefore, further testing could not be conducted and it is listed as Spares/Repair.

Autoclave Series 300

This item was removed from a university laboratory where it was surplus to requirements.

The plug has been removed by the previous owner, therefore, we could not test it any further.

It is in poor cosmetic condition. it si ultimately listed as spares/repairs for this reason.

Dynamic Gastric Custom Made Model

This item was removed from a university lab where it was surplus to requirements.

This custom-made Dynamic Gastric Model exhibits poor cosmetic condition. It cannot be powered on or tested due to a visual PAT failure and exposed wiring.

The Dynamic Gastric Model (DGM) is a bench-top computer controlled in vitro system that simulates digestion in the human stomach. DGM allows accurate prediction and understanding of the behaviour of foods or drug preparations within the human gut during digestion in real time.

Link Analytical eXL Model 1100-012 System

This system was removed from a university laboratory where it was surplus to requirements.

The main eXL unit initially powered on, supplied power to the monitor, and displayed startup errors (see photos), but the keyboard and mouse were unresponsive. Upon restarting, the monitor and indicator lights did not power up, although internal computer activity could still be heard. Further attempts to power cycle the system were unsuccessful.

Therefore, this system is listed as Spares/Repair.

It is in good overall cosmetic condition.

The system comprises the following:

• Link Analytical eXL
• Model: 1100-012
• Serial No.: 2917
• Link Analytical Monitor
• Model: CLR 1401
• Serial No.: 2665
• Link Analytical Keyboard
• Model: 1487
• Serial No.: 2763
• Link Analytical Mouse and Mouse Mat
• Link Analytical Printer (Epson LQ-500)
• Model: P78PA
• Serial No.: T0011258
• *Note: Printer would fail PAT due to a missing rear cover
• (Box of printer paper included)

Included Manuals:

• Link Analytical eXL System Service Manual
• Link Analytical Disk, Tape & File Sequel, Sequences, Display & Hard Copy, Genie, Video Frame Grabber
• Link Analytical Getting Started – X-Ray Analyser, System Manager, RTS-2/FLS, Auto
• Link Analytical Computer System & Electron Diffraction Pattern Analysis
• Link Analytical Analysis & Imaging
• Link Analytical Quantitative Mapping Operators Manual

Accessories and Additional Parts:

• Box of 10 floppy disks
• Labelled black 'X-Ray' cables and a grey monitor cable (collected as connected)
• 2 x Tracor Northern IPP Series II X-Ray Analyzer Operator Manuals
• 3 x Digital software disks (in blue cases – large format)
• GEMS Sensor – P/N 197093-RS (white)
• Unidentified round metal part
• Boxed metal piece labelled "Scintillator" (assy – ME 0084)
• Metal part tagged "X-Ray Source XA2-57"
• Metal part with Watec WAT-902B CCD Camera and:
• Objective lens: M Plan APO 10 SB 0.23 ∞/0 SLWD 39
• Metal piece with part number AG61-113 etched at the base
• Orange cable marked "AML J011 034"
• Black light source
• Various other cables (not compatible with the eXL)

Carl Zeiss Surgical Microscope + Metz NAG 80 VA Controller

This item was removed from a university laboratory where it was surplus to requirements.

The item is in reasonably good cosmetic condition; however, it cannot be powered on due to the absence of a plug and a split in the flex exposing the internal wires.

It is therefore sold as spares or repair.

Includes:

• Carl Zeiss Surgical Microscope
• Metz NAG 80 VA Controller

Dionex Ultimate 3000 RSLCnano System – Spares/Repair Lab

This system was removed from a university where it was surplus to requirements.

It is in good cosmetic condition and powers on. During testing, the following error was displayed: “A temporary Power Failure has occurred.”

Therefore, this system is listed for spares or repair.

Also included;

6 x Various Sized Reagent Bottles.

Shimadzu SCL-10A System with RF-551 Spectrofluorometric Detector and RF-551 Fluorescence HPLC Monitor

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on and is in fair condition with some cosmetic wear. The accompanying PC initially worked and displayed Shimadzu Class VP software, but it now fails to boot, remaining unresponsive after shutdown.

Additionally, the previous owner stated that the system is faulty.

Therefore, it is listed as Spares/Repair.

Includes:

• Shimadzu SCL-10A System Controller (Model: SCL-10A, Serial No.: 20290E)
• Shimadzu RF-551 Spectrofluorometric Detector (Model: RF-551, Serial No.: 28E00028)
• Shimadzu RF-551 Fluorescence HPLC Monitor (Model: RF-551, Serial No.: 070775)
• Stream 56X Max PC with Windows 95 and Shimadzu Class VP Software (non-functional as described)
• Acer AL511 Monitor
• Viglen Keyboard
• Microsoft Mouse

Hewlett Packard HP 1050 Series HPLC System Detector 79853C, Pump, Autosampler

This system was removed from a university laboratory where it was surplus to requirements.

The system has not been powered on and is in poor condition, with significant cosmetic wear. Some panels and screens are loose due to broken internal clips. The previous owner stated the system is faulty, although the fault has not been verified.

It is therefore listed as spares or repair.

Please note: The Password and Username for the Prime software, is not available.

The system comprises the following:

• 1 × Hewlett Packard Variable Wavelength Detector (Model: 79853C#/004, Serial No.: 3225JO1856)
• 2 × Hewlett Packard Autosampler
• 1 × Hewlett Packard Quaternary Pump
• 1 × Hewlett Packard Column Compartment with Solvent Tray (Model: 79856AX, Serial No.: 3216G05079)

Includes:

• Viglen Genie P3 733 running Windows 2000 with Prime software installed
• Sony monitor
• Unbranded keyboard
• Microsoft mouse

Hewlett Packard HP 1050 Series HPLC System

This system was removed from a university laboratory where it was surplus to requirements.

The system has not been powered on and is in poor condition, with significant cosmetic wear. Several panels and screens are loose due to broken internal clips. The previous owner stated the system is faulty, although the fault has not been verified.

It is therefore listed as spares or repair.

Please note: The Password and Username for the Prime software are not available.

The system comprises the following:

• 1 × Hewlett Packard Variable Wavelength Detector (Model: 79853C#/004, Serial No.: 3334J03749)
• 1 × Hewlett Packard Autosampler
• 1 × Hewlett Packard Quaternary Pump
• 1 × Hewlett Packard Column Compartment with Solvent Tray (Model: 79856AX, Serial No.: 3216G04683)

Includes:

• AcerPower S Series PC running Windows XP with Prime software installed (login unavailable)
• Acer AL511 monitor
• Fujitsu keyboard
• Compaq mouse
• HPLC Technology Analog Signal

PicoTrace Control Enclosure with Bentrup TC805 and Siemens Micromaster

This item was removed from a university laboratory where it was surplus to requirements.

The unit is in poor condition with visible wear and missing components, including three rails that secure the doors, one large door, and the top lid that covers the electrics and fan. Due to the missing lid, the item has not been powered on for safety reasons.

Therefore, it is listed as Spares/Repair.

According to the previous owner, the unit was reported to be in working order before being moved from the lab but requires replacement of two or three small plastic pins that secure the panel seams, which cracked during transit.

Included internal components:

• Bentrup TC805-X-3 (Model: TC805-X-3, Serial No.: 024546)
• Bentrup TC805-X-3-PT100 (Model: TC805-X-3-PT100, Serial No.: 027021)
• Siemens Micromaster (Model: Micromaster, Serial No.: XAK221MM326B)
• Schmersal 3JB (Model: 3JB, Serial No.: N/A)

Digitimer Neurolog System NL900 w/2 Modules Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we were unable to test it due to it failing the visual PAT due to not having blanking plates fitted.

Therefore, it is listed as Spares/Repair.

Modules

• 1 x D.C. Preamp
• 1 x Bridge Balance (100MΩ Max)

Model - NL900

S/N - NL900-623

Genevac VC3000TA Vapour Condenser Spares/Repair Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, but was unable to be tested as it requires connection to a Genevac Centrifugal Evaporator. (Not included)

Additionally, the previous owner notified us that it was faulty, although the fault was not diagnosed,

It is therefore listed as Spares/Repair

Woodway Desmo-Force Non-Motorised Treadmill

This item was removed from a university laboratory where it was surplus to requirements.

The treadmill powers on and is in reasonable cosmetic condition. Due to the weight of the components, it could not be fully assembled or tested. The unit includes the required nuts and bolts for connection. It features exposed wiring and a visible circuit board on the upright tension system, which may have contributed to a previous visual inspection failure.

It is therefore, listed as Spares/Repair.

Includes:

• Nuts and bolts for setup

Model: Desmo-Force

Bright Instrument SC12CL 5030 Microtome Cryostat – Spares/Repair

This item was removed from a university where it was surplus to requirements.

The unit is in good cosmetic condition and powers on, however, during temperature testing the system did not begin cooling.

Therefore, it is listed as Spares/Repair.

Model: SC12CL 5030

Aviso TheOnyx Liquid Handling System – Spares/Repair Lab

This system was removed from a university where it was surplus to requirements.

It powers on and is in reasonably good cosmetic condition. However, the previous owner reported that it is faulty, though no further details were provided.

It is therefore listed as Spares/Repair.

Hiden Analytical Secondary Mass Spectrometer and Ion Counting RF Head

These items were removed from a university laboratory where they were surplus to requirements.

It has failed an insulation test during Class 1 PAT testing and therefore could not be powered on. For this reason, it is being listed as Spares/Repair.

In overall good cosmetic condition.

This job lot of items comes from a university where they were surplus to requirement. They were collected from various store rooms and facilities.

These items have undergone varying levels of testing - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle, intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

This job lot of items comes from a university. The items were no longer required, collected from various store rooms and facilities.

None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.