All Products

£ 500.00 (ex. VAT) 1 in stock

Job Lot of Various Sykes-Pickavant Bearing / Gear Pullers - Spares/Repair

ITEM-47407

Job Lot of Sykes-Pickavant Bearing/Gear Pullers

These items were removed from a university where they were surplus to requirement.

A large assortment of bearing and gear puller components, mostly—if not entirely—manufactured by Sykes-Pickavant in the UK. All parts appear to be in good used condition.

Please note:

We cannot guarantee that all pullers are complete.
Some extra bolts may be required to connect the legs to the pullers.
All items are housed in a built tool chest for convenient storage and transport.

Therefore, this job lot of items are listed as Spares/Repair.

Study the photos carefully for full details on included parts and condition.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab

ITEM-46525

Sorvall RC-3B Plus Floor Standing Centrifuge - Spares/Repair Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition but has not been tested on site due to the service report attached stating;

Rotor lock: Seized, cannot remove rotor

No reported problems Service and check as above Unit is old

Note 6: door seal has shrunk and will not go back into place

Note 9: chamber is corroded due to substance.

Note 10: gas struts have failed, lid is heavy and can fall.

Note 12: drive shaft housing corroded.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Adkins AIPST 160 Heat Press - Spares/Repair

ITEM-42998

Adkins AIPST 160 Heat Press - Spares/Repair

This item was removed from a university laboratory where it was surplus to requirements.

The upper heat plate has become detached on one side due to a failed weld. Additionally, there is an electrical fault caused by a wiring loom issue connected to the canopy fans, which is blowing the fuse. As a result, the unit could not be tested and is listed as Spares/Repair.

It does not have a 3-phase plug.

In good overall cosmetic condition with minimal wear.

Model: AIPST 160

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System Lab Spares/Repair

ITEM-46288

Qiagen BIOROBOT 8000 Universal Platform Liquid Handling System

This system was removed from a university laboratory where it was surplus to requirements.

It powers on but has not been tested further at our site.

The previous client has notified us that it is not in working order and that Qiagen no longer supports this instrument.

The system is in good cosmetic condition.

Includes:

Cupboards/drawers integrated into the stand
All bottles and solvent traps
A pump
9 x 1100µl tip rack holders
Multiple miscellaneous plate holders
Tube holding racks
Handles for moving the unit
4 x 50µl tip rack holders
1 pack of Elution Microtubes
1 BGR Bottle
Lubricating oil
Various QIAsoft 5.0 disks including operating system, protocol packages, and maintenance disks
Data handbooks
Manuals

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific CO2 incubator BB15 Lab Spares/Repairs

ITEM-45101

Thermo Scientific Heraeus CO2 Incubator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on, but the display screen does not activate, and an alarm sounds until the unit is turned off.

Therefore, it is listed as Spares/Repair.

The incubator is in excellent cosmetic condition.

Includes:

3 shelves (47 x 43 cm)
Manuals
Sample holders

Model: BB15

Serial No.: 40998054

Internal dimensions: D51 W47 H60 cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Function Line BB15 Co2 Incubator Spares/Repair Lab

ITEM-42723

Thermo Scientific Function Line BB15 CO₂ Incubator

This item was removed from a university laboratory where it was surplus to requirements.

The incubator powers on, and the display and controls respond correctly. During testing, it was set to 37°C and left to run for 24 hours but did not exceed 19.8°C, consistent with the ambient temperature in the listing room.

No further temperature testing or CO₂ function testing was performed.

Due to the issues stated above, this item was listed as Spares/Repair.

Includes:

Three internal shelves

The door seal and inner door catch are in good condition.

In good clean cosmetic condition with functional controls and display, but unable to confirm heating function due to limited temperature rise.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Oxford Instruments Nitrogen Cryostat - Spares/Repair Lab

ITEM-42889

Oxford Instruments Nitrogen Cryostat

This item was removed from a university laboratory where it was surplus to requirements.

The item is in physically complete condition but has not been tested. The internal thermometer has been removed, and wiring to the electrical feed through has been broken, affecting its operability.

Therefore, it is listed as Spares/Repair.

Includes:

Oxford Instruments Nitrogen Cryostat body
Associated wiring and connectors (incomplete/damaged)

£ 500.00 (ex. VAT) 1 in stock

Dudley Safes Heavy Duty Safe w/ Key

ITEM-42992

Dudley Safes Heavy Duty Safe w/ Key

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes;

1 x Key

£ 495.00 (ex. VAT) 1 in stock

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

ITEM-36538

Millipore Millistak Pod Disposable Depth Filters and 3 Capsule Filters

The units are brand new and unused.

2x Boxes of MC0HC10FS1

6x Boxes of MC0HC054H1

1x Plastic Pack of Optiscale DisposableCapsule Filters

£ 495.00 (ex. VAT) 1 in stock

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller Lab

ITEM-35997

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Gallenkamp Digital Flame Analyser FGA-350-L w/ Lafert Air Compressor Pump Lab

ITEM-24780

This Gallenkamp Digital Flame Analyser FGA-350-L was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition with minor marks from use. We were able to get it to produce a spark.

The lab confirmed that it was working prior to removal.

With it is;

1 x Lafert air compressor pump:

Model LM 63/4

The unit powers up but has not been tested further.

£ 495.00 (ex. VAT) 1 in stock

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

ITEM-36555

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB

This was removed from a university where they were surplus to requirements.

1x Yamaha RX V1500

S/N: Y066054VX

1x Extron MVX 84 VGA A

S/N: 33-1023-01 REV C

1x AMX NI-3000 Integrated Controller

1x AMX NFX-Mini

1x Universal Open Rack Cabinet with Wheels, black

1x Jamo D 6SUB

S/N: 16211050024

All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

£ 495.00 (ex. VAT) 1 in stock

Lot of HP & Agilent Chromatograph Circuit Boards Lab

ITEM-38796

Lot of HP & Agilent Chromatograph Circuit Boards

The units are untested.

Included are;

1 X HP 5890 10245-60015 Gas Chromatograph Electronic Pressure Control Board
1 X HP E2071/82341 ISA Interface Card E2073-66501 HPIB GPIB Board
2 X Agilent HP 5890A 5890 II GC ECD Electron Capture Detector Board 19233-60015
1 X Agilent HP 19257-60015 & 19257-60020 5890 Series II HPIB GPIB
1 X Berger SFC Minigram Circuit Boards STI460093684, 40200G9D6, 19257-60505
3 X HP Agilent SERIES II GAS CHROMATOGRAPH 5890 Keypad 05890-60740
2 X Agilent HP 5890 GC II 120V Single Phase Power Supply 05890-60050 Chromatograph

NEW ITEM

£ 495.00 (ex. VAT) 1 in stock

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

ITEM-38989

Job Lot of 33 Boxes of WintWire Welding Wire Size - 4.0 x 1.7mm

33 x Boxes

Box info:-

Order no. HPWAAM/2

Cast no. 195790

Weight - 8.6kg

Ref - 16898/2

Size - 4.0 x 1.7mm

Quality - 100Cr6

All looks new and unused though a box has been opened for photos.

£ 495.00 (ex. VAT) 1 in stock

Dionex P580A Low Pressure Gradient Degassing Pump Lab

ITEM-38784

Dionex P580A Low Pressure Gradient Degassing Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 495.00 (ex. VAT) 1 in stock

Olympus SZ40 Stereo Zoom Microscope SZ-ST W.10X Lab

ITEM-30619

This Olympus SZ40 Stereo Zoom Microscope SZ-ST was removed from a university lab where it was surplus to requirements.

The lamp powers on via the Olympus power and is in full working order. It focuses well.

It is in reasonably good cosmetic condition with marks from use.

£ 490.00 (ex. VAT) 1 in stock

Grant SBB Aqua 12 Plus Water Bath Lab

ITEM-42220

Grant SBB Aqua 12 Plus Boiling Water Bath

This item was removed from a university laboratory where it was surplus to requirements.

The water bath is in good cosmetic condition, with some light wear below the waterline.

It powers up and is in good working order (thermometer not included).

Specifications.

Model: SBB Aqua 12 Plus
Serial No.: MJ1028005
Capacity: 12 litres
Features: Clear polycarbonate lid

£ 490.00 (ex. VAT) 1 in stock

Hund Wetzlar Wilovert Inverted Microscope w/ 1 x Objective 20/0.25 Ph-p Lab

ITEM-29830

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives

This was removed from a university lab where it was surplus to requirements.

The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use.

It is supplied with;

3 x WF 10X Eyepieces.

2 x Covers.

1 x Eyepiece (no information).

1 x 10 x P Eyepiece.

1 x Spare Fuse Part No. (670.55327).

1 x Tool Part No. (019.0120.0).

1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

£ 485.00 (ex. VAT) 1 in stock

KNF Neuberger N 035 AN.18 Diaphragm Vacuum Pump

ITEM-38768

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump

This was removed from a university lab where it was surplus to requirements.

The unit powers up and runs but has not been tested further.

It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 1 in stock

Robins Scientific Hydra 96 Microdispenser Lab

ITEM-35101

This Robins Scientific Hydra 96 Microdispenser was removed from a university lab where it was surplus to requirements.

The unit powers up and the up/down function has been tested. It is in good cosmetic condition with marks from use.

£ 480.00 (ex. VAT) 2 in stock

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

ITEM-39710

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition with minor marks

£ 480.00 (ex. VAT) 1 in stock

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

ITEM-39744

Lab-Bubble Still Air PCR Enclosure - Black BUB-PCR-SA-BLK

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

£ 480.00 (ex. VAT) 3 in stock

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

ITEM-39746

Lab-Bubble Still Air PCR Enclosure - Red - BUB-PCR-SA-RED

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 475.00 (ex. VAT) 1 in stock

Elga Model: PURELAB FLEX Water Purification System Lab

ITEM-34576

This was removed from a university lab where it was surplus to requirements.

We were unable to test the unit as it was not supplied with the PSU

Max Pressure: 1.5/22 Inlet.

bar/psi: 1.5/22 Working.

Elga LC197 - Biofilter fitted - Expiry Date 2020-02.

Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

£ 470.00 (ex. VAT) 1 in stock

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

ITEM-35330

Oxford Cryosystems Cryostream 600, Cold Head & Reactivation Heater Lab

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good cosmetic condition.

The Reactivation Heater was tested to 108.8 ˚C with a digital thermometer (not included).

£ 460.00 (ex. VAT) 1 in stock

Jeol JEM-1200 EX Pump and Pressure Tank

ITEM-39684

Jeol JEM-1200 EX Pump and Pressure Tank

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in good cosmetic condition with marks from use.

£ 455.00 (ex. VAT) 1 in stock

Unbranded Laboratory Microscope Vibration Isolation Platform Lab

ITEM-19969

This Unbranded Laboratory Microscope Vibration Isolation Platform was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in reasonably good cosmetic condition with some marks from use.

Size not taking into account the shape - L45 X W60 X H7.5cm

£ 455.00 (ex. VAT) 1 in stock

MakerBot Replicator Model Z18 3D Printer 5th Gen

ITEM-37488

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal.

No filament spool is included.

Usage:

Print time: 188.12 hours
Mass extruded: 3.1 kg

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)

£ 455.00 (ex. VAT) 1 in stock

MotionLink Model ServoStep Rackmount Motor Driver

ITEM-43090

MotionLink ServoStep Rackmount Motor Driver

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

Sicco Desiccator Cabinet Vacuum 260 x 260 x 260 mm (Internal W x D x H) Lab

ITEM-47232

Sicco Desiccator Cabinet Vacuum 260 x 260 x 260 mm (Internal W x D x H) Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility.

£ 450.00 (ex. VAT) 1 in stock

La Cimbali S39 Barsystem Coffee Machine

ITEM-47161

La Cimbali S39 Barsystem Coffee Machine

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on. No further testing has been carried out at our facility.

Please note; The spill tray is missing.

Fitted with : Blue 16amp Plug.

£ 450.00 (ex. VAT) 1 in stock

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

ITEM-47155

Bravilor Bonamat 1 Instant Coffee Machine BLR1-002

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 14 in stock

Camspec M508 Spectrophotometer Lab

ITEM-46072

Camspec M508 Spectrophotometer

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. We are unable to test it further at our facility.

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 450.00 (ex. VAT) 1 in stock

Liquid Nitrogen Tank Dewar Trolley

ITEM-46992

Dual Liquid Nitrogen Tank Trolley

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

£ 450.00 (ex. VAT) 1 in stock

Olympus CK2 Inverted Phase Contrast Microscope w/ 3 x Objectives Lab

ITEM-46945

Olympus CK2 Inverted Phase Contrast Microscope with 3 x Objectives

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, and the dials for adjusting the objective level operate without issue.

However, the front dial is stuck and cannot be moved. Additionally, two of the objectives could not be removed for detailed photographs, though one was successfully detached. The microscope shows reasonable cosmetic wear consistent with prior use.

Includes:

1x Olympus LWD C A20 / 0.40 / 160/1.2
1x Olympus A10 / 0.25 / 160/0.17
1x Olympus E A4 / 0.10 / 160/–

Model: CK2

£ 450.00 (ex. VAT) 1 in stock

Fluidigm C1 Single Cell Auto Prep System Lab

ITEM-34637

This Fluidigm C1 Single Cell Auto Prep System was removed from a university lab where it was surplus to requirements.

The unit powers up and passes all self checks.

It is in excellent cosmetic condition with minor marks from use.

Firmware Version - 2.3-1.2-2.8-2.0

Software Version - 2.2.3.1

Chips Supported - 178;177;179;186;191

£ 450.00 (ex. VAT) 1 in stock

CWE Capstar-100 CO2 Carbon Dioxide Analyser Lab

ITEM-42655

CWE Capstar-100 Carbon Dioxide Analyser Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Specification;

Model: Capstar-100
Serial No: 201128

£ 450.00 (ex. VAT) 1 in stock

Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17 Lab

ITEM-41159

Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 450.00 (ex. VAT) 1 in stock

Job lot of Flight Cases (Qty. 5) Airbus, LHT-HAM.

ITEM-37111

Job lot of Flight Cases (Qty. 5)

These items were removed from a University as they were surplus to requirements.

All flight cases are in reasonably good cosmetic condition, with some scuffs and scratches from general use.

All handles and clasps on the flight cases are in good working condition.

Included are the following:

Airbus Large White flight case

External Dims:

L76cm W133cm H41cm

Interior Dims

L70cm x W132cm x H36cm

LHT-HAM Long Black flight case

External Dims:

L44cm x W140cm x H39cm

Interior Dims:

L38cm x W133cm x H34cm

LHT-HAM Cubic Flight Case:

External Dims:

L71cm x W79cm x H59cm

Interior Dims:

L66cm x W75cm x H53cm

LHT-HAM Small Square flight case:

External Dims:

L37cm x W39cm x H26cm

Interior Dims:

L33cm x W37cm x H23cm

Airbus Small white flight case:

External Dims:

L25cm x W48cm x H25cm

Interior Dims:

L21cm x W45cm x H22cm

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Edwards Speedivac 2 Roughing Vacuum Pump - Rotary Vane Lab

ITEM-24513

This Edwards Speedivac 2 Vacuum Pump was removed from a university lab where it was surplus to requirements.

The pump has been professionally serviced and is in good working order. It performs to 2 x 10-1

The item is in good cosmetic condition but has marks and stains from use.

£ 450.00 (ex. VAT) 1 in stock

Dolomite Mitos P-Pump Remote with Droplet Collector + Sensor

ITEM-35924

This was removed from a university lab where it was surplus plus to requirements.

All units power up but have not been tested further.

It is in reasonably good cosmetic condition with minor marks from use.

Included are;

-Dolomite Mitos P-Pump

-Dolomite Mitos Sensor Interface

-Dolomite Mitos Flow Rate Sensor

P-Pump model number- 3200176_5

P-Pump serial number- 4901379

Sensor serial number- 1600878

RECERTIFIED ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus BB 16 Function Line CO2 Incubator Lab

ITEM-39055

Heraeus BB 16 Function Line CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The system has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with minor marks.

£ 450.00 (ex. VAT) 1 in stock

Heraeus CO2 Incubator Type BB 6220 CUO2 Lab

ITEM-31143

Heraeus CO2 Incubator Type BB 6220 CUO2

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition externally and fairly poor cosmetic condition internally.

It has been recertified by en engineer with heating and CO2 functions tested,.

Specifications;

Model: BB 6220 CUO2
SN: 94109551
Internal dimensions: D56 W65 H66cm
6 Doors with 6 Shelves: 50 x 26cm

£ 450.00 (ex. VAT) 1 in stock

Marrutt Film Drying Cabinet Model-36 35 Lab

ITEM-46909

Marrutt Drying Cabinet Model-36 35 Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in reasonably poor cosmetic condition, with wear and rust evident, and some bolts missing at the back of the unit, as shown.

Despite the cosmetic issues, the cabinet is in complete working order.

$Image of Waters 410 Differential Refractometer Lab$

£ 450.00 (ex. VAT) 1 in stock

Waters 410 Differential Refractometer Lab

ITEM-18971

This Waters 410 Differential Refractometer was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in reasonably good cosmetic condition but has some marks from use.

£ 450.00 (ex. VAT) 1 in stock

Genomic Solutions Cartesian Honeybee Protein Crystallisation Lab System

ITEM-21159

This system was removed from a university lab as surplus to requirements. The lab reported: "Hasn’t been used for a few years. I am told it was working fine last time. "

Genomic Solutions Cartesian Dispensing System ,Honeybee SD 8+1 Active. Model 6PCSDBXL-00.

The system in the perspex enclosure was in good working order prior to it being disconnected. There is also included a spare unit which the university was using to provide spare parts.

There are eight tube rails each holding 24 tubes.

There are two Dell GX520 PC's that both have Microsoft XP pro installed and the software for the honeybee installed. There are no personal data on either of the units and all passwords and usernames have been changed on both. A HP 1702 monitor, usb keyboard and mouse are also included.

It also comes with instruction books and a CD-Rom of software with Cartesian AXSYS V81.6.2.

Included are the following;

Model Honeybee 8+1 Active (complete)

Serial No. H2755

Model Honeybee 8+1 Passive (incomplete)

Serial No. HSD2756

2 x Dell Optiplex GX520 PCs running Windows XP Professional

Serial Nos. JQBJOB1. BBVD891

HP 1702 17" monitor Serial No. CNN407072Y

Dell keyboard RT7D50 Serial No. CN-OW7658-37172-58O-08FI

Passed a PAT test on 10.06.24

The Honeybee unit powered on with power indicator lights showing on the main panel and injection head.

A small vacuum pump powered on and generated suction.

The first PC powered on but would not boot up properly, the second booted up and loaded windows and showed the software icons.

When the icons were selected attempts were made to communicate with the Honeybee hardware but were not successful.

The com cables reconnected into different ports but the data link could not be made.

Software:

Genomic Solutions AxSys Ver 81.6.2 November 2005

Manuals:

3 x Genomic Solutions Training Guide V4 May 2006

1 x Genomic Systems Cartesian Honeybee Bench-top Protein Crystallisation System Operating Manual Version 1.0 January 2003

Included:

8 x 24 position tube holders

1 x barcode reader

1 x small vacuum pump

1 x Dell mouse

5 x data cables

£ 450.00 (ex. VAT) 1 in stock

Lamy Rheology Rheomat Model - RM 100 Viscometer Lab

ITEM-24333

This Lamy Rheology Rheomat Model - RM 100 Viscometer was removed from a university lab where it was surplus to requirements.

We were unable to power it us as we did not have the correct power supply.

It is in reasonably good cosmetic condition with some marks from use.

£ 450.00 (ex. VAT) 1 in stock

Amersham Biosciences TE 77 PWR Lab

ITEM-41699

Amersham Biosciences TE 77 PWR

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on.

The power supply is included.

Model: TE 77 PWR

Serial No.: 20137585

£ 450.00 (ex. VAT) 1 in stock

Canon Legria HF G40 HD Camcorder

ITEM-37103

This Canon Legria HFG40 HD Camcorder was removed from a university lab where it was surplus to requirements.

It is in very good cosmetic condition and in full working order.

Includes;

Canon VIXIA HF G40 Full HD Camcorder

BP-820 Lithium-Ion Battery Pack (1780mAh)

CA-570 Compact AC Power Adapter

WL-D89 Wireless Controller

STV-250N Stereo Video Cable

HTC-100/S High Speed HDMI Cable

IFC-300PCU/S USB Interface Cable

Lens Hood (with Lens Barrier)

CR2025 Battery

Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

£ 450.00 (ex. VAT) 1 in stock

MakerBot Replicator Z18 3D Printer 5th Gen

ITEM-37487

MakerBot Replicator Z18 3D Printer (5th Gen)

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. No further testing has been carried out, but the previous owner stated it was in full working order prior to removal. No filament spool is included.

Specifications:

Build volume: 25.2 x 19.9 x 15 cm (L x W x H)
Layer resolution: 100 microns
Filament type: 1.75 mm
Nozzle diameter: 0.4 mm

Includes:

MakerBot Replicator Z18 3D Printer (5th Generation)