Agilent 7890A GC with CTC Analytics GCPAL System

This system was removed from a facility where it was surplus to requirements.

Both units are in good cosmetic condition and power on. The screws required to secure the CTC autosampler to the top of the GC are missing. No further testing has been carried out.

Included Components:

Agilent 7890A GC System

• Serial Number: CN10752082
• Powers on.

CTC Analytics GCPAL

• Model Number: GH6502-CTC
• Serial Number: CH00161569

Consumables Included:

• Jet, Capillary Optimized, 0.29 mm ID (P/N: G1531-80560)
• FID Insulation Assembly (P/N: G1531-60700)

Micromass Quattro Ultima Liquid Chromatography Mass Spectrometer (LC-MS) Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in complete working order. The system was last serviced in 2019 and last used in 2022. At the time of decommissioning, there were no known faults.

Thermo Scientific TriPlus RSI System for Liquid Injection Lab

This item is sold on behalf of a client where it was surplus to requirements.

It is in complete working order and good cosmetic condition, having undergone a full service by Unity Lab Services shortly before decommissioning.

Packaged in a genuine CTC box for shipping, with domestic shipping included.

Features:

• PALbase 850 X/Y unit with PAL Control Board Series I
• PAL RSI z-head
• PALterminal
• PALpower and cables
• PAL Mounting Kit Standalone for HPLC
• LCMS-P100 Tool
• LCVMS Wash module
• Valve Drive module for VICI valve
• Injection Valve
• PAL3 Peltier Stack for 6 deepwell plates (or vial racks, racks not included)
• Voucher for new syringe for the syringe tool with two standard needles (end user can choose 100 μL, 250 μL or 500 μL)

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Biosafe Model Sepax S-100 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

Serial No. 002599

Manufactured April 2022

Bioer NPA-32P Nucleic Acid Purification System (2021) Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

Last serviced in 2023.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

Serial No. 002421

Manufactured June 2021

ZEISS PALM CombiSystem Axiovert 200M, XE120-XL,HV-D30P w/ Parts & Accessories

This was removed from a university lab where it was surplus to requirements.

The system powers up and the microscope is in good working order. We had some issues controlling the camera and the stage during testing, but this may be due to user error.

With the Palm RoboSoftware V4 we can control the following microscope features:

• Stage Y Axis movement
• Stage X Axis movement
• Objective Motor (able to select objective)
• Increase/Decrease Light
• Change Light Source
• Raise/Lower Objective

It is in excellent cosmetic condition with minor marks.

Included are the following;

Carl Zeiss Axiovert 200M

Model: Axiovert 200M

Serial#: 3820005950

Objectives fitted:

Zeiss Fluar 5x/0.25

Zeiss Fluar 10x/0.50

Zeiss LD Plan-Neoflaur 20x/0.40 Corr

Zeiss LD Plan-Neoflaur 40x/0.60 Corr

Zeiss EC Plan-Neoflaur 63x/1.25 Oil M27

Zeiss EC Plan-Neoflaur 100x/1,30 Oil

Eyepieces:

W-PL 10x/23 (Qty.2)

P.A.L.M Microlaser Technologies

Model: PALM CombiSystem

Serial#: CSC-01010

Date: 2007

Fujitsu Siemens Celsius R630 PC, Fujitsu Siemens SCIENVIEW B17-2 C CI Monitor (QTY.2) Fujitsu Siemens Keyboard, Mouse

Model: Celsius R630

Serial#: YKFU009307

Both Monitors, PC, Keyboard and Mouse are in good cosmetic condition and power on with no issue.

PC has the following software installed:

Palm RoboSoftware V4

Hitachi HV-D30 Camera

Model: HV-D30P

Serial#: 0675280

Laser Quantum LD3000 power supply

Model: Forte

Serial#: 02165

p                                                  

Zeiss CryLaS FTSS 355-50

Serial#: B594C279

Item powers on and is in full working order.

Communicates with control panel and microscope.

EXFO X-Cite Series 120

Model: XE120-XL

Serial#: 0570

Item is in good cosmetic condition.

Item powers on with light source in full working order.

All items listed above are sat on a Melles Griot Optical Table with PALM CombiSystem being fixed to it.

Measurements and weight of Melles Griot Optical Table are as follows:

Dx120Wx90Hx77cm

Weight:

Additional Parts & Accessories:

Zeiss AdhesiveCap 500 Clear

PALM MembraneSlides

PALM CombiSystem C User Manuals

PALM DishHolder 50 C

PALM MultiCap Insert 8c

PALM MultiCap Collector D 8C (Qty.2)

PALM CollectorSet SingleTube II 500

PALM CombiSystem User manual (Qty.2)

PALM RoboSoftware Software Guide (Qty.2)

Laser Quantum Forte Operating Manual

PALM MicroBeam Technical Information

Zeiss Axiovert 200 Operating Manual

Zeiss DuplexDish 50 Sterile Packed (Qty.6)

LumoxTM Dish 50 Hydrophilic, Sterile (Qty.5)

Zeiss MembraneSlide 1.0 Pen

X-Cite In Control Series 120 User's Guide

Zeiss PALM RoboSoftware CD

PALM MicroLaser System RoboSoftware 4.0 CD

Fujitsu Siemens Product Recovery CD

Carl Zeiss 29 Software Release 4.6

Zeiss Axiovert 200 M/Mat Floppy Disc

3-CCD Color Camera Model HV-D30 Operating Manual

Fujitsu Siemens Celsius Drivers & Utilities CD

Scenview B17-2 CI / B19-2 CI

Lambda Physik Lasertechnik Compex 102 Class 4 Laser System – 12W (157–800 nm)

This system was removed from a university where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

According to the previous owner, the system was fully operational prior to removal.

Included Components:

• Lambda Physik Control Panel – Model No. 262 353 10
• Serial No.: 0E30
• Software: CTERM 1.6
• Becker VTC 6/2 Pump – Serial No. 1465546
• Mounted on a mobile cart/trolley with gas fittings and regulators
• (Note: Gas regulators will require replacement)
• Laser power key included

Perkin Elmer JANUS G3 Automated Workstation Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order.

Please note that the unit has shipping locks in place and should not be powered up with these in place.

The user log-in information for the included PC is available on request.

This system comprises the following:

• Perkin Elmer JANUS G3 Automated Workstation
• PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC
• PerkinElmer Peri Pump
• Ducting
• 2 x Waste bottle
• Plate support tiles
• Trough holders
• NewLand Scanner
• 10 packs of conductive filter tips
• Ares 2000RT conversion rack

Perkin Elmer JANUS G3 Automated Workstation Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order.

Please note that the unit has shipping locks in place and should not be powered up with these in place.

The user log-in information for the included PC is available on request.

This system comprises the following:

• Perkin Elmer JANUS G3 Automated Workstation
• PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC
• PerkinElmer Peri Pump
• Ducting
• 2 x Waste bottle
• 3 x Cooling tube holders
• Plate support tiles
• Trough holders
• NewLand Scanner
• 56 barcode racks
• Ares 2000RT conversion rack

BD FACSCanto II Flow Cytometer System with PC, Software, and Accessories

This system was removed from a university laboratory where it was surplus to requirements.

The system includes a BD FACSCanto II Flow Cytometer, Fluidics Cart, and a complete PC setup with software and manuals. Due to the presence of a Class 3 laser, the flow cytometer could not be powered on. The fluidics cart powers on and is fully equipped.

This is a 2 laser 6 colour (4-2) unit.

Components and Condition:

BD FACSCanto II Flow Cytometer

• Catalog No.: 338960
• Serial No.: V96100924
• Condition: Unable to power on due to Class 3 laser.

BD FACSCanto Fluidics Cart

• Serial No.: N/A
• Powers on.
• Included Bottles:
• Waste Bottle
• BD FACSRinse (REF 340346)
• 2 x BD FACSClean (REF 340345)
• BD FACS Shutdown Solution (REF 334224)

PC & Accessories:

• HP Z240 PC: Powers on, software installed. - Password for PC available on request.
• NEC 24" Monitor: Powers on.
• HP Mouse and Keyboard.
• Cables: 2 x Ethernet cables, 1 x Comms cable.
• FACS Diva software - Password not required.

Included Software and Manuals:

• BD FACSCanto II System Software
• Application Handbook (2nd Edition)
• BD High Throughput Sampler Users Guide
• Getting Started with BD FACSDiva Software
• BD Cytometer Set Up & Tracking Application Guide
• BD FACSCanto II Training Manual
• BD FACSCanto II Instructions for Use
• BD HTS for FACSCanto II FSE Installation Instructions
• Folders containing duplicate manuals, PC CDs, and service records.
• Toolbox with spare waste bottle lids and other small plastic fittings.

Thermo Scientific Trace GC Ultra- HS TriPlus AutoSampler Gas Chromatography Lab

This system was removed from a facility where it was surplus to requirement.

Both included units are in good cosmetic condition and power on, we are unable to test them further at our facility.

System includes;

Thermo Scientific Focus GC

• Model - GC Focus Series
• S/N - 1110462

ISQ Single Quadrupole MS

• Model - ISQ - Mass Spectrometer
• S/N - ISQ130129

Agilent xCELLigence SP Real-Time Cell Analyser w/ Software Lab

This system is being sold on behalf of an operational laboratory.

It is in good cosmetic condition and in full working order.

Required software included.

It is available for collection from Dublin, Ireland.



The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Renishaw Incise Dental Scanner

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order, however the PSU is not included.

The software is not included.

Please note; The software required is no longer supported with this device.

Thermo Finnigan LCQ Advantage Mass Spectrometer Surveyor LC-MS System

This was removed from a university lab where it was surplus to requirements. The lab confirmed that everything was in working order prior to removal. We have powered up everything but were unable to test further at our facility.

All the units are in good cosmetic condition with minor marks.

Included are;

1 x Thermo Finnigan LCQ Advantage Mass Spectrometer System

Serial No. LAD00300

1 x Surveyor PDA Detector

Part No. SRVYR-PDA5

Serial No. 56866

1 x Surveyor Autosampler

Part No. SRVYR-AS

Serial No. 77269

1 x Surveyor MS Pump

Part No. SRVYR-LPUMP

Serial No. 62615

1 x Edwards 28 Vacuum Pump

Model E2M28

Serial No. 170517841

Supplied with:

1 x Xcalibur LCQ Advantage Revision 1.3.

1 x Xcalibur LCQ Advantage/DecaXP Revision 1.3 SP1.

1 x Xcalibur Core Data System Software Revision 1.3.

1 x Thermo MSQ 2.0 SP2 Instrument Control.

1 x Thermo Xcalibur 2.1 W/Foundation 1.0.2 Rev.B.

1 x Thermo Xcalibur LC Devices 2.4.0.

2 x Thermo Xcalibur LC Devices 2.3.0 Software.

1 x Thermo TSQ Series 2.1.1.

1 x Thermo SurveyorPlus Manual Set.

1 x Thermo Part No. 23043457 Start cable Integrator/Gtrace.

1 x Thermo Part No. 23038071 Recorder Cable L=1900mm.

1 x Emerson Industrial Automation Leroy-Somer Engine;

2 x Spark Generators;

1 x PULNIX 20mm CCD Camera;

5 x Cables;

3 x Spacer 7.7x3.2;

1 x Spacer 6.3x3.2;

2 x ThermoFisher Scientific Tubing Fused SI 150Ux390U;

2 x Storer: TFS;

1 x ThermoFisher Scientific Insulator Heater APCI;

1 x O-Ring;

1 x Plunger.

LGC Biosearch Technologies Araya + Tape Counter Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes the following:

Biosearch Technologies Tape Counter

Model- TC1412

S/N- C521002

5L Water Supply Bottle With Pump

Model- DS-AC2102

S/N- 1210242

The table the item sits on is included.

Peak Scientific Genius SQ 24 Nitrogen Generator

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Lloyd LR30K Plus Tensile Test Machine

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in great condition with minimal wear. The unit is missing its splinter shield and load cells, as these were retained by the university for a replacement system. It is very clean and in good order, having been lightly used in a university environment.

The system was checked by Ametek recently, both this year(2025) and in 2023.

Includes:

• LR_Plus Series and EZ Series Universal Test Machine User Manual
• Nexygen Plus 3 Materials Testing Software, Version 3.0 (P/N: 40/0783)

Model: LR30K Plus

Serial No.: 108879

Revision Level: 4

Sartorius Stedim Biotech Palletank for Mixing – 200L

This item was removed from a facility where it was surplus to requirements.

The tank is in good used cosmetic condition, with various signs of general use and minor surface rust spots in some areas.

Includes:

• Sartorius Combics 1 scale – powers up and works as it should
• Sartorius base frame – suitable for 50–200L tanks

Product code: FXC301942

Capacity: 200L

Features: Integrated weighing, jacketed, PED-compliant

The lab reported this system was in good working order prior to removal.

B&W Tek BWS015 TEA001 Spectrometer with RTP-5 Reflectance Probe (x2 available)

This item is sold on behalf of a client. It is surplus to requirement.

The system is in excellent cosmetic condition and full working order. Each unit has been tested prior to listing and has approximately 200 hours total operational use. Only light cosmetic wear is present, consistent with careful laboratory use.

Includes:

• B&W Tek BWS015 TEA001 Fiber-Optic Spectrometer
• B&W Tek RTP-5 Reflectance Probe
• Connecting data/power cable

Typical specifications:

High-performance, USB-powered fiber-optic spectrometer designed for laboratory, quality control, and field-based spectral analysis. The BWS015 TEA001 features a high-sensitivity TE-cooled detector, delivering accurate and repeatable measurements across a broad spectral range, making it suitable for research and industrial measurement applications.

• Model: BWS015 TEA001
• Wavelength range: 350 – 1050 nm (typical)
• Detector: TE-cooled, high sensitivity
• Interface: USB plug-and-play PC connection
• Software: Compatible with BWSpec software

The items are available for collection from Christchurch, Dorset, UK.

Please note: The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

AID iSpot ELR08IFL with AID Fluorescent Lamp

This item was removed from a facility where it was surplus to requirement.

The iSpot unit powers on via an in-house 24V PSU (not included). The accompanying AID Fluorescent Lamp powers on via a standard IEC cable.

The lamp's run-time counter displays 0-00, which is likely due to a reset. A light pipe connects the main unit to the lamp, and USB and comms cables are fitted to the rear, indicating that a PC connection may be required for full operation.

Both units are in reasonable, used cosmetic condition.

Includes:

• AID iSpot ELR08IFL Unit
• AID Fluorescent Lamp (UV Light Source)
• Light Pipe
• USB and Comms Cables

Bioer QuantGene 9600 RT Real-Time PCR Machine Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Bioer GenePure Pro Fully Automatic Nucleic Acid Purification System Lab

This item is sold on behalf of a client where it is surplus to requirements.

This item is in complete working order, and in good cosmetic condition. It was recently serviced in 2023.

The client stated it was never used.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Teledyne Lecroy Wave Runner 640Zi, 4GHz Oscilloscope 40GS

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, the next calibration was due in October 2025.

Includes;

• QWERTY Keyboard (USB)
• Protective Screen Cover
• PP022-1 & PP022-2 Passive Probes (With Manuals)
• PVM-5 Cable (50ft)

WAB Turbula Heavy-Duty Shaker-Mixer Model T10B

This item was removed from a facility where it was surplus to requirements.

The mixing chamber is in excellent condition and appears barely used. The exterior of the machine shows areas of poor cosmetic condition. The access door is intermittently stiff when lifting, though it operates normally at other times.

The unit was tested briefly and ran smoothly during operation.

It was stated as being in good working order prior to removal.

Dimensions;

WAB Turbula Heavy-Duty Shaker-Mixer Model T10B

• External length (cm) 99
• External width (cm) 88
• External height (cm) 63

WAB Turbula Heavy-Duty Shaker-Mixer Model T10B w/ Table Unit

• External length (cm) 102
• External width (cm) 88
• External height (cm) 124

Battenfeld Microsystem 50 Injection Moulding Machine

This was removed from a university workshop where it was surplus to requirements.

The unit was not tested on our site, but the lab confirmed it was in working order prior to removal.

It is in good cosmetic condition with minor marks.

Photocentric Liquid Crystal Magna 3D Printer with Wash Unit & Cure L – Laboratory Resin Printing System

This equipment is being offered on behalf of a client, where it is now surplus to requirements.

The system comprises a Photocentric Liquid Crystal Magna resin 3D printer, together with a Photocentric Wash Unit and Photocentric Cure L UV curing oven, providing a complete workflow for resin printing, post-processing, and final curing of printed components.

The printer operates using Photocentric’s LCD-based photopolymerisation technology, allowing large-format, high-resolution resin printing suitable for prototyping, research, and engineering applications.

The Photocentric Cure L UV curing unit requires maintenance, as the UV lamps currently require replacement and are not functional at present.

The system includes Photocentric Studio software, with the licence stored on a USB memory stick.

The client has advised they are able to palletise and wrap the equipment for transport if required.

Includes;

• Photocentric Liquid Crystal Magna 3D Printer
• Photocentric Wash Unit (99L)
• Photocentric Cure L UV curing unit
• Photocentric Studio Software licence (stored on USB memory stick)
• Resin sonicating bath
• Approx. 5L resin (available if required)

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

Molecular Devices SpectraMax iD3 Multi-Mode Microplate Reader Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

During testing it successfully heated to 37ºc, no further testing conducted

The previous owner stated it was on working order prior to removal.

Last Service: 2018

• Storage used: 57.7% (12.411 GB free)
• Firmware version: V1.2 b64 12.07.2019
• PIC version: V1.3 b14 29.11.2016

Please Note; There are some bubbles on the display screen, this does not effect its functionality.

Continuum Surelite SLI-10 High Energy Nd:YAG Laser w/ Power Supply

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

The power supply was powered on and PAT during listing.

The previous owner stated it was in good working order prior to removal.

Continuum Surelite Nd:YAG I SLI-10 High Energy Laser & Power Supply

This system was removed from a facility where it was surplus to requirement.

Due to safety restrictions on testing Class 3 and above lasers at our facility, the laser has not been powered on. However, the power supply has been powered on and has passed PAT testing.

It is in good cosmetic condition.

The previous owner stated it was in working order prior to removal.

Diener Pico Plasma System with Leybold D16BCS Pump & Accessories

This system was removed from a facility where it was surplus to requirements.

The system is in good cosmetic condition with typical signs of previous use. The previous owner stated the unit was in working order, having been purchased in 2022 and only lightly used.

No further testing has been carried out at our facility.

Included Components

• Diener Pico Plasma System
• Leybold D16BCS PFPE Vacuum Pump – S/N: 210424780
• Kern EW 620-3NM Analytical Scale – S/N: 201196062
• BriskHeat SDCEKE with Heated Bottle Jacket – S/N: 370092/12
• 5 × Metal Brackets (likely base mounting components)
• Pair of heat protective gloves
• Various small vacuum pump parts/spares

Documentation

• 2 × Manuals

Biosafe Sepax S-100 Cell Separation System

This item was removed from a facility where it was surplus to requirements.

It powers on and is in good cosmetic condition. No further testing has been carried out.

Please note: there is a small crack on the side of the unit, as shown in the photos.

Model: Sepax S-100

Beckman Optima XL-100K Ultracentrifuge Lab

CAT no. 365669

Serial no. COX97D02

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order when tested on-site, the previous client has also stated it was in working order prior to removal.

There is no rotor included.

Protein Technologies Sonata XT Peptide Synthesis System w/ PC & Software

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

PC Included:

• Dell OPTIPLEX 380
• Dell LCD Monitor
• Dell Keyboard and Mouse
• Protein Technologies Mouse Mat

Software Installed:

• Symphony
• PTI Peptide Predictor
• Sontana

Protein Technologies Symphony Peptide Synthesiser System w/ PC & Software Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

PC Included:

• Dell OPTIPLEX 380
• Dell LCD Monitor
• Microsoft Keyboard and Dell Mouse
• Protein Technologies Mouse Mat

Software Installed:

• Symphony
• PTI Peptide Predictor
• HI92000 (Hanna Instruments)

Protein Technologies Symphony Peptide Synthesiser System w/ PC & Software Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

PC Included:

• Dell OPTIPLEX 380
• Dell LCD Monitor
• Dell Keyboard and Mouse
• Protein Technologies Mouse Mat

Software Installed:

• Symphony
• PTI Peptide Predictor
• Peptide Companion (PCOM)

PerSeptive Biosystems Pioneer Peptide Synthesis System w/ PC & Software Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Accessories:

• Pioneer Spare Parts
• Pioneer Boards
• Columns
• Peptide Reaction Vessels
• Filters
• Probe and UV Cell Accessories

PC System:

• Viglen Genie 2 Plus Pentum II PC (S/N: 1226460-SEM) - One irremovable asset tag.
• NEC Monitor (S/N: 07114212NB)
• Keyboard and Mouse
• Pioneer Workstation Software

This Protein Technologies Prelude Peptide Synthesis System is being sold on behalf of a client. It is surplus to requirements.

The unit is in full working order and the software is included. The PC is built in, and controlled by the included monitor & keyboard.

The plastic section of the ducting will be retained by the Lab, the metal section coming directly from the Prelude is included.

It is in very good cosmetic condition with only minor marks from use.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Brooks Life Sciences IntelliXCap Automated Screw Cap Decapper/Recapper 48-format

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was in good working order prior to removal.

Waters 3100 Mass Detector LC-MS Lab

This item was removed from a facility where it was surplus to requirement.

It powers on.

Last Service: 02/11/22

Brooks Life Sciences Type IntelliXCap Screw Decapper/Recapper 48-format Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Olympus IX-70 Inverted Confocal Microscope System with LSR UltraVIEW Scanner Lab

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on, and the basic microscope functions have been tested successfully. All units appear to operate as intended, including illumination and mechanical stage movement. Full operation likely requires a compatible PC running the appropriate control software for confocal and imaging functions.

The system consists of:

Olympus IX-70 Inverted Microscope fitted with:

• Olympus IX-ILL 100 LH Transmitted Illumination Column
• Uniblitz Shutter with VMM-D1 Shutter Driver
• Olympus IX-ADUCD UCD Adapter
• Olympus U-UCDB-2 Condenser
• Olympus IX-SFR Mechanical Stage
• Olympus 6 Position Nosepiece
• Olympus IX-RFAC Cube Turret fitted with 2 filter cubes:
• U-M41002B HQ:R/DII
• U-M41001 HQ:FITC
• Olympus U-BI90CT Binocular Tube 90CT
• Olympus WH10X-H/22 Eyepiece (appears to be missing outer ring)
• Olympus WH10X/22 Eyepiece
• Olympus U-ULS100H Halogen Lamp
• Olympus U-ULS100HG Mercury/Fluorescence Lamp with U-RFL-T Power Supply
• LSR UltraVIEW Confocal Scanner (not tested due to laser)
• Perkin Elmer 4100V-002 Ultra Pix Imaging System (not tested)
• Sutter Instruments Filter Wheel with Lambda 10-2 Controller
• PI E-662 LVPZT Amplifier/Servo with objective adapter
• Olympus PlanApo 60x/1.40 Oil ∞/0.17 objective (seized in adapter)

Included Objectives:

• Olympus UPlanApo 40x/1.00 Oil Iris ∞/-
• Olympus UPlanFl 20x/0.50 ∞/0.17

Additional components:

• 2 boxes containing various optical and mechanical spare parts

GE Healthcare / Cytiva Xuri Cell Expansion System W25 Lab

This system was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

System comprises;

GE Healthcare / Cytiva Xuri W25 Pump

• Model - Xuri Cell Expansion System W25 Pump
• S/N - 2642421
• Code No - 29083569

GE Healthcare / Cytiva Xuri W25 CBCU

• Model - Xuri Cell Expansion System W25 CBCU Full
• S/N - 2637955
• Code No - 29083620

Accessories

GE Filter Heater

• S/N - 29-0652-52

PacBio Sequel IIe Next Generation Sequencing (NGS) System Lab

This item was removed from a facility where it was surplus to requirements.

Due to safety limitations at our facility, we are unable to power on class III+ equipment. However, the previous owner has stated that the system was in full working order at the time of removal.

It is in good cosmetic condition.

PacBio Sequel IIe Next Generation Sequencing (NGS) System Lab

This item was removed from a facility where it was surplus to requirements.

Due to safety limitations at our facility, we are unable to power on class III+ equipment. However, the previous owner has stated that the system was in full working order at the time of removal.

It is in good cosmetic condition.

PacBio Sequel II Sequencing System Lab

This item was removed from a facility where it was surplus to requirements.

Due to safety limitations at our facility, we are unable to power on class III+ equipment. However, the previous owner has stated that the system was in full working order at the time of removal.

It is in good cosmetic condition.