BD FACSCanto II Flow Cytometer System with PC, Software, and Accessories

This system was removed from a university laboratory where it was surplus to requirements.

The system includes a BD FACSCanto II Flow Cytometer, Fluidics Cart, and a complete PC setup with software and manuals. Due to the presence of a Class 3 laser, the flow cytometer could not be powered on. The fluidics cart powers on and is fully equipped.

This is a 2 laser 6 colour (4-2) unit.

Components and Condition:

BD FACSCanto II Flow Cytometer

• Catalog No.: 338960
• Serial No.: V96100924
• Condition: Unable to power on due to Class 3 laser.

BD FACSCanto Fluidics Cart

• Serial No.: N/A
• Powers on.
• Included Bottles:
• Waste Bottle
• BD FACSRinse (REF 340346)
• 2 x BD FACSClean (REF 340345)
• BD FACS Shutdown Solution (REF 334224)

PC & Accessories:

• HP Z240 PC: Powers on, software installed. - Password for PC available on request.
• NEC 24" Monitor: Powers on.
• HP Mouse and Keyboard.
• Cables: 2 x Ethernet cables, 1 x Comms cable.
• FACS Diva software - Password not required.

Included Software and Manuals:

• BD FACSCanto II System Software
• Application Handbook (2nd Edition)
• BD High Throughput Sampler Users Guide
• Getting Started with BD FACSDiva Software
• BD Cytometer Set Up & Tracking Application Guide
• BD FACSCanto II Training Manual
• BD FACSCanto II Instructions for Use
• BD HTS for FACSCanto II FSE Installation Instructions
• Folders containing duplicate manuals, PC CDs, and service records.
• Toolbox with spare waste bottle lids and other small plastic fittings.

AID iSpot ELR08IFL with AID Fluorescent Lamp

This item was removed from a facility where it was surplus to requirement.

The iSpot unit powers on via an in-house 24V PSU (not included). The accompanying AID Fluorescent Lamp powers on via a standard IEC cable.

The lamp's run-time counter displays 0-00, which is likely due to a reset. A light pipe connects the main unit to the lamp, and USB and comms cables are fitted to the rear, indicating that a PC connection may be required for full operation.

Both units are in reasonable, used cosmetic condition.

Includes:

• AID iSpot ELR08IFL Unit
• AID Fluorescent Lamp (UV Light Source)
• Light Pipe
• USB and Comms Cables

Protein Simple Ella Immunoassay System Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

The lab confirmed it was in good working order prior to removal.

Includes USB and other various parts as shown.

BD FACSCanto II Flow Cytometer w/ Fluidics Cart Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Zeiss Axioplan 2/LSM 5 Pascal Confocal Laser System

This system was removed from a university laboratory where it was surplus to requirements.

The Axioplan 2 microscope has been successfully controlled via the included Pascal software.

While the laser modules have not been fully tested, the software allows toggling of the laser control.

All components are in good used cosmetic condition.

The system comprises the following:

• Zeiss Axioplan 2ie MOT microscope stand, fitted with:
• Zeiss LSM 5 Pascal VarioTwo
• HBO 100 Mercury Lamp with ebq100 power supply
• 4 x Filter Cubes: DIC, DAPI, FITC, Rhod
• 2 x Zeiss 44 40 34 Pl 10x/25 Eyepieces
• Zeiss 1067-325 Axio Mechanical Rotating Stage
• Zeiss 1159-530 Condenser
• Zeiss 1058-431 Light Channel
• Zeiss 1095-490 Switching Mirror
• HAL 100 Halogen Lamp
• 6-position nosepiece with objectives:
• Zeiss Plan-NEOFLUAR 10x/0.3 ∞/0.17
• Zeiss Plan-NEOFLUAR 20x/0.50 ∞/0.17
• Zeiss Plan-NEOFLUAR 40x/1.3 Oil ∞/0.17
• Zeiss Plan-APOCHROMAT 63x/1.4 Oil Ph3 ∞/0.17

• Zeiss LSM 5 Pascal Laser Module, including:
• Lasos LGK 7786 P 543nm Laser (June 2011) with Lasos SAN 7460A power supply
• Lasos LGK 7812 ML04 450–530nm Laser (November 2014) with Lasos LGN 7812-01 power supply

• Zeiss LSM 5 Pascal Laser Module +, including:
• Lasos LGK 7628-1 633nm Laser (May 2002) with Lasos SAN 7460A power supply

• Computer & Software:
• Fujitsu Siemens Celsius PC with Windows XP (password removed), Pascal Software installed, and serial hardware dongle
• 2 x NEC monitors, keyboard & mouse
• AxioVision software CDs

• Zeiss Pascal 5 ECU Units:
• 1 x ECU tested and working with this system
• 1 x ECU marked 'DEAD 5v' (included untested as a spare)

• Spare PC:
• Fujitsu Siemens Celsius 670 (non-booting, Windows 2000) – included for spare parts

• Other:
• Isolation table is included
• Table pictured with lasers is not included

Thermo Scientific TriPlus RSI System for Liquid Injection Lab

This item is sold on behalf of a client where it was surplus to requirements.

It is in complete working order and good cosmetic condition, having undergone a full service by Unity Lab Services shortly before decommissioning.

Packaged in a genuine CTC box for shipping, with domestic shipping included.

Features:

• PALbase 850 X/Y unit with PAL Control Board Series I
• PAL RSI z-head
• PALterminal
• PALpower and cables
• PAL Mounting Kit Standalone for HPLC
• LCMS-P100 Tool
• LCVMS Wash module
• Valve Drive module for VICI valve
• Injection Valve
• PAL3 Peltier Stack for 6 deepwell plates (or vial racks, racks not included)
• Voucher for new syringe for the syringe tool with two standard needles (end user can choose 100 μL, 250 μL or 500 μL)

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Polaron Plasma Barrel Etcher - PT7160 Lab

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

METI HPS (Human Patient Simulator) System w/ Software x 2

These systems were removed from a university where they were surplus to requirement.

The cosmetic condition of both mannequins is reasonably good overall. One mannequin is missing a hand, however the detached hand is included with the sale.

The METI HPS Lab Racks power on and appear operational. The internal modules have been checked and are reported to be functioning correctly. Please note that we have been unable to perform a full operational test of the complete METI HPS system with all associated equipment connected. As such, the systems are being sold as powered-on and partially tested.

The included BAMBI Oil-Free VTS75D Silent Air Compressor is in good cosmetic condition and powers on, however no further testing has been carried out at our facility.

Both Apple MacBooks power up and are in good working order with METI HPS6 software installed.

The instructor workstation iMac computers power on and have METI HPS6 software installed.

All cables shown within the photographs are included.

All items included with the listing:

METI HPS (Human Patient Simulator) Mannequin x 2

Model: HPS

Size: 5ft 11in

METI HPS Lab Rack x 2

Serial#1: HPS 337

Serial#2: HPS 373

Dimensions and weight:

Hx130Wx60Dx78cm 160kg

2 x Full-Functioning Monitor Interface cables

2 x NE-1000 One Channel Programmable Syringe Pump

BAMBI Oil-Free VTS75D Silent Air Compressor

Model: VTS75D

2 x Medical Isolation Transformer – IsoBox ISB-100W

Model: ISB-100W

Apple Airport Extreme

Serial#: 6F9512UGACC

Apple Airport Extreme

Serial#: HS4033XVQ4P

Instructor Workstation

Included in the workstation are the following :

iMac 8,1

iMac G5

Both iMacs have the following software installed:

METI HPS6

All cables shown in the photos are included.

Lloyd LR30K Plus Tensile Test Machine

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in great condition with minimal wear. The unit is missing its splinter shield and load cells, as these were retained by the university for a replacement system. It is very clean and in good order, having been lightly used in a university environment.

The system was checked by Ametek recently, both this year(2025) and in 2023.

Includes:

• LR_Plus Series and EZ Series Universal Test Machine User Manual
• Nexygen Plus 3 Materials Testing Software, Version 3.0 (P/N: 40/0783)

Model: LR30K Plus

Serial No.: 108879

Revision Level: 4

This is being sold on behalf of a client. It is surplus to requirements.

The MicroBeta TriLux is an instrument designed for liquid scintillation or luminescence detection of samples in microplates, tubes or on filters. This system has 12 detectors and is set up for 96/384 well plates and a 16-shelf plate-loading magazine

It has been refurbished by Factory trained Engineers to the original instrument specification.

Included with it are;

3 months UK Warranty

12 Detectors

USB upgrade

Windows 10 upgrade.

PC Monitor

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Peak Scientific Genius SQ 24 Nitrogen Generator

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Metrohm Liquid Handling System with 872 Extension Module, 774 Oven Sample Processor, and Additional Components

This item was removed from a university laboratory where it was surplus to requirements.

The system includes various Metrohm modules and accessories. Individual components have been powered on where possible, we are unable to conduct further testing as a system at our facility.

Information regarding cosmetic condition of each unit is listed below.

System Components and Condition:

Metrohm 774 Oven Sample Processor with 774 SC Controller and 728 Stirrer

• Powers on, minimal wear, and in good condition.
• The 774 SC Controller operates as intended, moving the stage without faults.
• Model: 774 Oven Sample Processor
• Type: 1.774. - 0010/08138

Metrohm 881 Compact IC Pro

• Powers on, excellent condition with no visible wear.
• Includes a Metrosep C4 250/4.0 Column and Metrohm IC Conductivity Detector.
• Model: 881 Compact IC Pro
• S/N: 1881000010121
• Type: 1.881.0010

Metrohm 812 Valve Unit

• Not powered on due to lack of compatible power lead (external power: 24VDC/2A, 5VDC/0.5A).
• Good condition with minimal wear.
• Model: 812 Valve Unit
• S/N: 1812001004135

Metrohm 705 UV Digester

• Powers on, fair condition with some wear, and a broken control dial.
• Model: 705 UV Digester
• Nr: 0N2 147
• Type: 17050017

Metrohm 872 Extension Module

• Powers on, in excellent condition with minimal wear.
• Model: 872 Extension Module
• Nr: 1872001007118

Metrohm 818 IC Pump

• Powers on, good condition with minimal wear.
• Model: 818 IC Pump
• Nr: 1818011003177

Accessories Included:

• Electrodes: (11 total; models listed below, some unreadable)
• Metrohm 6.0203.100 (pH 0...14/0...70°C, 3M KCI)
• Metrohm 6.0255.100 (pH 0...14/0...80°C, 3M KCI)
• Metrohm 6.0450.100 (Ag / 0...70°C, KNO3 sat)
• Metrohm 6.0418.100 (Ag / 0...70°C, KNO3 sat)
• Metrohm 6.0338.100 (Pt / -20...70°C)
• Metrohm 6.0252.100 (pH 0...14/0...60°C, 3M KCI)

Software:

• Mettler Toledo LabX Direct Balance Data Transfer Software
• Metrohm Metrodata A.701.0007 TiNet 2.4, Vesuv 3.0
• Metrohm Metrodata 2003 TiNet 2.5
• Fujitsu Siemens Scenicview A17-2A / A19-2A
• SCSI Card 2904
• Roxio Creator Business HD
• DMA-80 Manual
• Epson Stylus D78 Vol 1.0
• Corel WinDVD

Tuttnauer 5075ELVCG-D Autoclave - Steam Sterilizer  

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 15/10/24

Diener Pico Plasma System with Leybold D16BCS Pump & Accessories

This system was removed from a facility where it was surplus to requirements.

The system is in good cosmetic condition with typical signs of previous use. The previous owner stated the unit was in working order, having been purchased in 2022 and only lightly used.

No further testing has been carried out at our facility.

Included Components

• Diener Pico Plasma System
• Leybold D16BCS PFPE Vacuum Pump – S/N: 210424780
• Kern EW 620-3NM Analytical Scale – S/N: 201196062
• BriskHeat SDCEKE with Heated Bottle Jacket – S/N: 370092/12
• 5 × Metal Brackets (likely base mounting components)
• Pair of heat protective gloves
• Various small vacuum pump parts/spares

Documentation

• 2 × Manuals

JEOL Neoscope JCM-5000 Scanning Electron Microscope (SEM)

This system was removed from a university laboratory where it was surplus to requirements.

The unit powers on successfully, and all components appear complete and in good overall condition.

Please note: we have not been able to test the system further, as the required PC and software are not included.

According to the previous owner, the SEM was fully operational prior to removal. However, the Deben Coolstage had not been used for some time, and its current functionality is therefore unverified.

Included Components:

• Deben Coolstage with specimen block, holder, and controller
• Oil vacuum pump
• Deben JCM-5000
• Deben Chamberscope power supply
• JCM-5000 Digest Operation Manual
• Coolstage Specimen Cooling Unit Operation Manual (LT3.05)
• Original manufacturer binder (2009) containing instructions

Micromass Quattro Ultima Liquid Chromatography Mass Spectrometer (LC-MS) Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in complete working order. The system was last serviced in 2019 and last used in 2022. At the time of decommissioning, there were no known faults.

This was removed from a university lab where it was surplus to requirements.

The system powers up and communicates with the PC and Software. It has not been tested further.

It is in good cosmetic condition with minor marks.

Applied Biosystems MDS SCIEX QSTAR Elite

Assy no. 1017064

SN - AP10870612

Parts inside identified:-

2 x Oerlikon Leybold Vacuum Turbovac Wide Range TW 690 MS

1 x Leybold Vacuum Turbovac TW 250 S

1 x SCIEX Turbo Ionspray, Assy no. 019296, SN - 055000928

1 x Inficon VGC023

1 x Spellman Unit

1 x 024143 Nanospray Switch Module

Pump on wheels:-

MDS SCIEX Assy no. 022832, SN - 70208570839

Pump Inside unit:-

Varian DS 602, Model 949-9335, SN - 245808

With Varian Oil Exhaust Filter NW25 coming out of top

Model - 949-9392

Powers on and appears to be in working condition.

Dell PC:-

MDS SCIEX PN - 1018761

Computer - P670 with Image

Comes with Dell 17" Monitor,

Keyboard & Mouse

PC Powers on and has Analyst QS 2.0 Software

Username - Administrator, No Password

Spare parts & accessories:-

1 x SCIEX Ion Sprayer, Assy no. 017614, SN - 0861050707

1 x SCIEX Heated Nebulizer, Assy no. 014989, SN - 219970226 w/ Assy no. 14368, SN - 311970312

1 x Part 022765-B CFN 0685

1 x Box labelled Maldi Plates, contains 2 x AB PN:4347689 & Approx 50-60 plates

1 x Box labelled Nano flow head with part inside

1 x CS Lilin PIH-090 9" Monitor (SN-0000553) - Powers on

1 x ULTRAK 9" Video Monitor Model - KM0900MN, SN - M2060084 - Powers on

1 x Ionwerks TDCx8

1 x SCIEX PN - 1009917, SN - 000519 - Powers on

1 x Box labelled QStar Elite RF Coils w/ parts 1003097 B & 1003098 B attached to SCIEX Filterboards

1 x MDS SCIEX PCB Interconnect, 022102-D, CFN

2 x Boxes labelled QStar elite parts - Full of small parts

2 x Leybold Vacuum TurboVac TW 690 MS

1 x 024143 Nanospray Switch Module

1 x 1002133 Signal Handling Module

1 x Harvard Apparatus Cat no. 98-0921, SN - 14816

1 x Inficon VGC023, SN - 399-557 - Powers on

2 x Oerlikon Leybold Vacuum Turbo Drive 690 MS

1 x Oerlikon Leybold Vacuum TW 250 S, SN - 20900451496

2 x SCIEX Turbo Nanospray, Assy no. 019296, SN - 037000911 & 11350070122

1 x SCIEX Ionspray, Assy no. 017614, SN - 656030708

1 x QLP 022353-A

1 x Spellman PN - X3359, Model - CZE5PN37X3359, SN - 52760-1-A00295 - Powers on

7 x Gold Modules:-

QPS Amplifier 1010829

CCPS 1017191

Lens PS 1024829

QPS Exciter 1008444

System Controller 1008411

DACS & Vaccum Gauge 1024717

HVPS 1012202

5 Folders of Manuals, service records, Hardware guides and Logbooks

GE Healthcare AKTAready Single-Use Chromatography FPLC System

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, but further testing could not be conducted at our facility. It is in good cosmetic condition, showing minor marks from use.

Cytiva has recommended that a new computer and license are necessary for full functionality.

We can include the PC and software at an additional cost. Please inquire for a detailed quote if interested.

Includes a box containing the following parts:

• 1 x Pneumatic Air Supply Hose
• 1 x System Computer Cable
• 2 bags of Clamps (3 per bag)
• 2 x Sealed Packs of Tubing
• 1 x USB Cable
• 1 x Service Key
• 9 x Packs of GE PN-18-1112-51 (2 per pack)
• 1 x GE RJ45 Coupler PN-56-3274-14
• 1 x GE Cooling Collars (A+B) PN-19-7825-01
• 10 x Omnifit 2.0mm Peek Barbed Adaptors
• 5 x Omnifit Adaptor to female luer (Cat no. 002502)
• 1 x Assure Plus 3 1/4" x 6 1/2" (Cat no. 83000)

Perkin Elmer JANUS G3 Automated Workstation Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order.

Please note that the unit has shipping locks in place and should not be powered up with these in place.

The user log-in information for the included PC is available on request.

This system comprises the following:

• Perkin Elmer JANUS G3 Automated Workstation
• PC, Monitor, Keyboard & Mouse - WinPREP software installed on PC
• PerkinElmer Peri Pump
• Ducting
• 2 x Waste bottle
• Plate support tiles
• Trough holders
• NewLand Scanner
• 10 packs of conductive filter tips
• Ares 2000RT conversion rack

ttp labtech ARKTIC 3106-00216 -80˚C Automated Biobanking Storage System (spt)

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we have been unable to test it further. The compressors are working, and all user data has been removed from the software.

Software installed: Arktic version 1.9.5 (Build 12)

It is in excellent cosmetic condition with minor marks from use.

Yokogawa Cell Voyager CV1000 System w/ PC & Software Lab

This system was removed from a university lab where it was surplus to requirements.

All units that form the system are in good cosmetic condition and powered up.

The system appears to be in full working order, we were able to obtain a live feed from the camera - See end of the slideshow.

The PC Has the following software installed:

CV1000 Software 1.06.06

With the use of the software we can control the following on the Main unit:

Open/Close Tray

Adjust Temperature

Adjust Plate Configuration

Change Objective

Adjust Camera Position

Included are;

Yokogawa Cell Voyager CV1000

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400006

Yokogawa Cell Voyager CV1000 Utility Box

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400012

PC Set Up.

Dell Flat Panel Monitor P2719H

Serial#: CN-09PR6R-WS200-89C-367S-A01

Dell Precision T1700 PC

Serial#: F2VM202

Dell Keyboard & Mouse

PC Has the following software installed:

CV1000 Software 1.06.06

Objectives in main unit:

UPLSApo10x2

UPLSApo20x

UPLSApo20x0

UPLFLN40x0

UPLSApo40x2

UPLSApo60x0

Biosafe Sepax S-100 Cell Separation System

This item was removed from a facility where it was surplus to requirements.

It powers on and is in good cosmetic condition. No further testing has been carried out.

Please note: there is a small crack on the side of the unit, as shown in the photos.

Model: Sepax S-100

SZG Hywell Rotary Double-Cone Vacuum Dryer – SZG-100

This equipment is being offered on behalf of a client, where it is now surplus to requirements.

The system comprises an SZG Hywell rotary double-cone vacuum dryer supplied together with heater, cooling water loop, pumps and solvent recovery tank.

The SZG rotary vacuum dryer range is designed for low temperature vacuum drying and solvent recovery applications within pharmaceutical, chemical and materials processing environments.

The client has advised the system is in good working order.

The client has advised they are able to package the equipment for transport if required.

Includes;

• SZG Hywell Rotary Double-Cone Vacuum Dryer
• Model: SZG-100
• Heater
• Cooling water loop
• Pumps
• Solvent recovery tank

Specifications;

• 100L total vessel volume
• 60L operating capacity
• 1.1kW motor power

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

Beckman Optima XL-100K Ultracentrifuge Lab

CAT no. 365669

Serial no. COX97D02

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order when tested on-site, the previous client has also stated it was in working order prior to removal.

There is no rotor included.

Raypa CFS-V150 Food Autoclave 150L Counter Pressure Retort Steriliser System Lab

This system is being sold on behalf of a client where it is surplus to requirements.

The unit features counter-pressure operation to help maintain packaging integrity during sterilisation and rapid cooling cycles, making it particularly suitable for food development kitchens, pilot plants, university food research departments, and small batch manufacturing environments.

Purchased new in 2020, the system reportedly saw only light use from March 2021 onwards and remains in excellent cosmetic condition throughout.

The autoclave has been routinely maintained and calibrated due to its use within food production applications. Calibration and preventive maintenance documentation is included within the sale.

The system comprises a 150 litre chamber with 3 stainless process baskets and includes software/data transfer accessories for process logging and monitoring.

Key Features

• Raypa CFS-V150 Food Autoclave
• 150 litre chamber capacity
• Counter-pressure sterilisation system
• Suitable for jars, pouches, bottles and packaged food products
• Rapid cooling functionality
• Stainless steel chamber construction
• Semi-industrial food processing specification
• Designed for pilot scale and small batch food manufacture

Included in Sale

• Raypa CFS-V150 Food Autoclave
• 3x Stainless steel process baskets
• USB and PC data transfer cable
• Software disc
• User manual
• Installation guide
• Calibration certificates and maintenance documentation

Service / Maintenance History

• Purchased in 2020
• Light use from March 2021 onwards
• Calibrated every second year
• Preventive maintenance records included
• Calibration reports included

Utilities / Site Requirements

• 3-Phase electrical supply required
• Pressurised water supply required
• Floor drain required
• Filtered water may be recommended depending on water hardness

Collection is available from:

Units 1–3, Manor Mill, Exeter Rd, South Brent, TQ10 9JD

A smaller vehicle with tail lift access is recommended due to site access restrictions.

Please note; this item is being sold on behalf of a client and is therefore non-returnable and non-refundable.

Protein Technologies Sonata XT Peptide Synthesis System w/ PC & Software

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

PC Included:

• Dell OPTIPLEX 380
• Dell LCD Monitor
• Dell Keyboard and Mouse
• Protein Technologies Mouse Mat

Software Installed:

• Symphony
• PTI Peptide Predictor
• Sontana

Protein Technologies Symphony Peptide Synthesiser System w/ PC & Software Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

PC Included:

• Dell OPTIPLEX 380
• Dell LCD Monitor
• Microsoft Keyboard and Dell Mouse
• Protein Technologies Mouse Mat

Software Installed:

• Symphony
• PTI Peptide Predictor
• HI92000 (Hanna Instruments)

Waters 3100 Mass Detector LC-MS Lab

This item was removed from a facility where it was surplus to requirement.

It powers on.

Last Service: 02/11/22

Stansted Fluid Power FPG12800 Pressure Cell Homogeniser 10ml Lab

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: The system does have an oil leak, presenting as a slow leak onto the benchtop.

This is a known/common issue with this type of equipment and is not easily rectified. Despite this, the unit remains fully operational.

Brooks Life Sciences IntelliXCap Automated Screw Cap Decapper/Recapper 48-format

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab confirmed it was in good working order prior to removal.

Protein Technologies Symphony Peptide Synthesiser System w/ PC & Software Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

PC Included:

• Dell OPTIPLEX 380
• Dell LCD Monitor
• Dell Keyboard and Mouse
• Protein Technologies Mouse Mat

Software Installed:

• Symphony
• PTI Peptide Predictor
• Peptide Companion (PCOM)

This Protein Technologies Prelude Peptide Synthesis System is being sold on behalf of a client. It is surplus to requirements.

The unit is in full working order and the software is included. The PC is built in, and controlled by the included monitor & keyboard.

The plastic section of the ducting will be retained by the Lab, the metal section coming directly from the Prelude is included.

It is in very good cosmetic condition with only minor marks from use.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Brooks Life Sciences Type IntelliXCap Screw Decapper/Recapper 48-format Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Sartorius Flexafe Pro Mixer Drive Unit FMD300001

This item was removed from a facility where it was surplus to requirements.

It powers up and operates as expected, with some general wear visible in the form of marks from regular use.

The lab confirmed this was in full working order prior to removal.

Thermo Scientific Trace GC Ultra w/ Thermoquest & DSQ II System Lab

This system was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The system comprises the following:

• Thermo Scientific Trace GC Ultra
• Serial No.: 320070555

• Thermo Scientific ThermoQuest AS2000
• Serial No.: 20000094

• Thermo Scientific DSQ II
• Serial No.: MS220-5462

3M Invivo2 400 Hypoxia Workstation With Ruskinn Gas Mixer Q Lab

These items were removed from a university where they were surplus to requirement.

Both units power up and are in good working order (socket tester not included).

It is in good cosmetic condition.

Includes the following:

• 3M Invivo2 400 Hypoxia Workstation
• Ruskinn Gas Mixer Q

Olympus IX-70 Inverted Confocal Microscope System with LSR UltraVIEW Scanner Lab

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on, and the basic microscope functions have been tested successfully. All units appear to operate as intended, including illumination and mechanical stage movement. Full operation likely requires a compatible PC running the appropriate control software for confocal and imaging functions.

The system consists of:

Olympus IX-70 Inverted Microscope fitted with:

• Olympus IX-ILL 100 LH Transmitted Illumination Column
• Uniblitz Shutter with VMM-D1 Shutter Driver
• Olympus IX-ADUCD UCD Adapter
• Olympus U-UCDB-2 Condenser
• Olympus IX-SFR Mechanical Stage
• Olympus 6 Position Nosepiece
• Olympus IX-RFAC Cube Turret fitted with 2 filter cubes:
• U-M41002B HQ:R/DII
• U-M41001 HQ:FITC
• Olympus U-BI90CT Binocular Tube 90CT
• Olympus WH10X-H/22 Eyepiece (appears to be missing outer ring)
• Olympus WH10X/22 Eyepiece
• Olympus U-ULS100H Halogen Lamp
• Olympus U-ULS100HG Mercury/Fluorescence Lamp with U-RFL-T Power Supply
• LSR UltraVIEW Confocal Scanner (not tested due to laser)
• Perkin Elmer 4100V-002 Ultra Pix Imaging System (not tested)
• Sutter Instruments Filter Wheel with Lambda 10-2 Controller
• PI E-662 LVPZT Amplifier/Servo with objective adapter
• Olympus PlanApo 60x/1.40 Oil ∞/0.17 objective (seized in adapter)

Included Objectives:

• Olympus UPlanApo 40x/1.00 Oil Iris ∞/-
• Olympus UPlanFl 20x/0.50 ∞/0.17

Additional components:

• 2 boxes containing various optical and mechanical spare parts

Epilog Legend 36 EXT Laser Cutter Model Number 9000 Laser System

This system was removed from a university where it was surplus to requirement.

It is in good overall cosmetic condition, we are unable to test it further due to limitation with testing Class 3+ lasers at our facility.

The previous owner stated it is in complete working order.

Partec CyFlow Cube 6 Flow Cytometer Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

We are unable to test it further due to limitations with testing Class 3+ lasers at our facility.

The previous owner stated it was in working order prior to removal.

Comes with:

2 × 1000 ml Duran glass bottles for sheath and waste

1 × CyFlow full license USB

1 × CyFlow software (Version 1.0 RUO)

1 × FCS Express Flow Cytometry disc

20 × small-volume single-use sample tubes

Partec sample port BioSafety upgrade kit

1 × blue spacer

Various manuals

GE Healthcare / Cytiva Xuri Cell Expansion System W25 Lab

This system was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

System comprises;

GE Healthcare / Cytiva Xuri W25 Pump

• Model - Xuri Cell Expansion System W25 Pump
• S/N - 2642421
• Code No - 29083569

GE Healthcare / Cytiva Xuri W25 CBCU

• Model - Xuri Cell Expansion System W25 CBCU Full
• S/N - 2637955
• Code No - 29083620

Accessories

GE Filter Heater

• S/N - 29-0652-52

PacBio Sequel IIe Next Generation Sequencing (NGS) System Lab

This item was removed from a facility where it was surplus to requirements.

Due to safety limitations at our facility, we are unable to power on class III+ equipment. However, the previous owner has stated that the system was in full working order at the time of removal.

It is in good cosmetic condition.

PacBio Sequel II Sequencing System Lab

This item was removed from a facility where it was surplus to requirements.

Due to safety limitations at our facility, we are unable to power on class III+ equipment. However, the previous owner has stated that the system was in full working order at the time of removal.

It is in good cosmetic condition.

PacBio Sequel IIe Next Generation Sequencing (NGS) System Lab

This item was removed from a facility where it was surplus to requirements.

Due to safety limitations at our facility, we are unable to power on class III+ equipment. However, the previous owner has stated that the system was in full working order at the time of removal.

It is in good cosmetic condition.

Vilber Fusion FX6 Edge Spectra 7 Channel Imaging System Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we have tested it with a compatible PC with the relevant software and it paired successfully.

Please note: There is no PC includes.

This system does include a USB drive with the EvolutionCapture Software installed.

Edwards Auto 306 Thermal Evaporator Coating System

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further. The system boots up and the internal pump runs.

Item contains:

Edwards RV12 Pump

Serial#: 006774738

Edwards Oil Mist Filter EMF10

Code#: A223 04 198

Edwards PV25EKA

Serial#: 006693767

Edwards B3060424A

Serial#: 006739951

Thermo Finnigan LCQ Advantage Mass Spectrometer System Lab

This system was removed from a facility where it was surplus to requirement.

It powers on with no fault noted.

Perkin Elmer LabChip GX Touch 24

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition.

The touch screen is in working order, and both the unload/load chip and plate functions are operating correctly.

Unable to test further.

Includes:

• USB stick

Buehler Micromet 5104 Hardness Tester

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Objectives:

• M50 0.65/♾️ 810-619 Mitutoyo Japan 0805002
• M10 0.25/♾️ 810-617 Mitutoyo Japan 0801002
• M20 0.40/♾️ 810-618 Mitutoyo Japan 0802002

Accessories:

• Toolbox
• Sample Holder
• Controller
• OminMet Modular Imaging Solutions Version 9.9 Software
• Certificate of Calibration from BUEHLER Dated 12/09/2023
• Instruction Manual