Wyatt Technology DynaPro DP-TH-01 Titan & DP-AMB-01 Microsampler

This system was removed from a university lab where it was surplus to requirements.

Both units are in good cosmetic condition and power up.

However, full functionality testing requires connecting to a PC with specific software, which is not included.

The previous owner has stated it was in good working order prior to removal.

Includes:

• USB cable
• DVI cable

Model Numbers:

• Titan: DP-TH-01
• Serial Number: 111-DPTH
• Laser Power (mW): 60
• Wavelength (nm): 828.98

• Microsampler: DP-AMB-01
• Serial Number: 104-DPAMB

Mettler Toledo Garvens 2 VS Checkweigher

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System

This system was removed from a university lab where it was surplus to requirements.

The microscope is in working order, but we have not tested the laser due to safety restrictions at our site.

There are no objectives fitted.

Items included are:

-Zeiss LSM Control S/N- 000260

-Hal 100 Lamp

-Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07

-Zeiss HBO 100W

-Zeiss HBO 100W/2

-Zeiss Lasermodul UV

-Fujitsu Siemans mouse

-Relevant manuals and guides

-Connection cables

-Comms PCi Cards & Dongle (non USB)

CTI Cryogenics Cryo Torr 8 High Vacuum Pump w/ 8001 Controller & SCW Compressor

This was removed from a university lab where it was surplus to requirements.

The Cryo pump is in excellent cosmetic condition but the rest of the system is in good to reasonable condition. It was in full working order when last used.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Edinburgh Instruments Time-Correlated Single Photon Counting System

This system was removed from a university lab where it was surplus to requirements.

Although all units successfully powered on, we cannot test it completely at our facility.

Condition varies as stated below each item.

The system includes the following components:

Edinburgh Instruments Spectrometer System

Serial#: 178

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller & PC with Software. The following tests were conducted:

1. Excitation Mono Successfully Initialised

2. Emission1 Mono Successfully Initialised

3. Excitation Polariser Successfully Initialised

4. Emission1 Polariser Successfully Initialised

5. Sample Holder Temperature Successfully Read

6. nF Iris did not initialise (nF Iris Cable present but unable to find port)

7. TAC Range & Scaler Successfully Initialised

All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device.

Additionally, the system includes:

Edinburgh Instruments Nanosecond Flashlamp Head

Model: nF900

Serial#: 095

Mfd: 03/2000

The item is in good cosmetic condition and pairs successfully with the Spectrometer System.

Edinburgh Instruments nF900 Controller

Model: nF900

Serial#: 092

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Edinburgh Instruments CD900 Controller

Model: CD900

Serial#: 112

Mfd: 03/2000

The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included.

Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard & Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

Thermo Scientific Robotics Enclosure Cabinet S-MAS9036-000-00 Lab

This enclosure was removed from a university where it was surplus to requirement.

This listing is the enclosure only and does not include the tables it sits on. Refer to the red highlight featured on the diagram.

It originally housed a Thermo Scientific™ Spinnaker™ Microplate Robot System which is not included.

The measurements for the assembled enclosure are as follows:

Length x 448cm

Width x 152cm

Height x 118cm

This item includes various brackets and fixings as seen, but we are unable to confirm if all the required items are included.

Atas GL Focus Robotic Sample Processor System

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and powered on, we are unable to test further at our facility.

The system comprises:

1x ThermoQuest Finnigan Polaris turbo pump controller

1x GCQ Gas chromatograph

Serial#: 950208

1x GCQ Mass Spectrometer

Serial#: 200065

Wheaton 6-Tier Roller Apparatus Cat No 348970CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver.

It is in good cosmetic condition with minor marks

This DVS Water Vapor Sorption Analyzer System was removed from a university lab where it was surplus to requirements.

The system powers on and is in good cosmetic condition. The system was tested with a digital thermometer (not included), but has not been tested further.

System includes:

CAHN DVS-1

CAHN Digital Recording Balance D-200

DVS Surface Measurement Systems

This Pall GeneDisc Cycler Real-Time PCR Platform for Pa was removed from a university lab where it was surplus to requirements.

The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility.

The item carried out self-checks on start-up.

Included with the item:

Delta Electronics 12-volt Screen Power Supply

Shimadzu PSSM-8 Peptide Synthesizer w/ Memory Key, System Disk & Accessories Lab

This was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition internally and externally.

It powers with the arm moving in the X/Y Axis using the onboard control panel, we are unable to test it further at our facility.

Included are the following:

Shimadzu PSSM-8 Peptide Synthesizer

Model: PSSM-8

Serial#: 310059

PSSM-8 Memory Card

Part#: 292-05230

PSSM-8 System Disk

Part#: 292-05108

Shimadzu BMD-1 Memory Card Drive

Model: BMD-1

Serial#: 310059

PSSM-C8 Cleavage Purge Unit

Shimadzu Needle

Part#: C 228-20243-94

Millex-LS syringe Driven Filter Unit

Part#: SLLS 025 NS

Shimadzu PSSM-8 Instructional Manual

This autoclave was removed from a university lab as surplus to requirements.

We were assured the unit was in good working order when last used, but was no longer required by the lab.

At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used.

Type:B-QCS-54260

To:BS.2646

Capacity:200

Maxpressure:25

Serial No:2845

Date:9-1-06

Litres:2006

Test Pressure:394

Max Filling mass:100kg

Intended use:Sterilise

Product group:2

Design temp:150 degrees c

Max Temp: 138 degrees c

Min Temp: N/A

Voltage: V00 50/60 8KW

Thermo Scientific Spinnaker Robotic Arm F01981 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate.

This item also includes the following:

• Emergency Stop Button
• MicroPlate Mount

Zeiss Axio Vert.A1 FL Inverted Microscope

This system was removed from a university lab where it was surplus to requirements.

The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted.

The instrument is configured as follows:

• 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000)
• Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination
• Reflector modules: DAPI, FITC, TRITC, empty

• 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000)
• Position 1: empty
• Position 2: 424228-9060 0.05T Neutral density filter 0.05
• Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55
• Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55
• Position 5: empty

• 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000)

• 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000)

• 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23

• 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000)

• 1 x Camera adapter 60N-C 2/3" 0.5x (426112)

• 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00)

• 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000)

• Object guide M, 130x85mm, for Axio Vert (432333-9040-000)

• 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

Foster + Freeman MVC3000 Fuming Cabinet

This item was removed from a university lab where it was surplus to requirements.

The cabinet powers on and is in reasonable cosmetic condition. Upon powering up, the cabinet initiates a 5-minute Mini Purge, after which the electronic door can be opened. However, the system displays a 'Filter Fault' status after startup, indicating a missing filter.

Therefore, further testing could not be conducted.

There is no filter fitted, the unit should work fine with one in.

Specifications:

• 1 Shelf: 74 x 58 cm
• 2 Baskets: 57 x 30 x 15 cm
• Underneath space: 75 x 64 x 32 cm

Model: MVC3000

Serial No: 3175

This Flir Systems ThermaCam SC500 194 780 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition minor with marks from use, we are unable to test it further at our facility.

Included are the following:

Flir Systems PC Card Interface

P/N: 194 240

S/N: 2030068

HiTRON 13.5 volt Power Supply

M/N: HES61-11B

S/N: 0165

Flir Systems Break Out Box

P/N: 194 257

S/N: 3300066

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab

This system was removed from a university lab where it was surplus to requirement.

Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility.

Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware.

Nucleocounter C-200

Serial No. 9000201112003520

Lenovo Thinkpad T15 laptop

Windows 10 operating system

Serial No. PF-2J1PMV

Also includes the following:

Included:

2 x Low-voltage power supplies

1 x Data lead

Nikon D-Eclipse C1 System With Melles Griot Accessories

This system was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further for safety reasons.

Included are the following;

Nikon D-Eclipse C1-LU3EX

Melles Griot 35-IMA-840-019

Melles Griot 05-LHP-991

Melles Griot 56ICS/S2695

Melles Griot 25-LGP-193-230

Peak Scientific Nitrogen Gas Generator N300DR

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up with the compressor running, we are unable to test it further at our facility.

This Oxford Instruments OptistatDN Nitrogen Bath Cryostats from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition, but due to the nature of the item we are unable to test it.

AKTA Purifier System with pH/C-900, UV-900, P-900, Box-900, and Frac-900

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good condition with minimal wear. No further functional testing has been conducted.

The system comprises the following modules:

• AKTA Purifier
• Serial No.: 56303327 KD 001769
• System No.: 18140000 001654

• pH/C-900
• Model: pH/C-900
• Serial No.: 56118981 KD 003619

• UV-900
• Model: UV-900
• Serial No.: 56119689 KD 003743

• P-900
• Model: P-900
• Serial No.: 56600001 KN 002409

• Frac-900
• Model: Frac-900
• Serial No.: 56303949 KD 004222

Lab Scale Fermenter: Bio-Age Bio-Spin Series 05A Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Priorclave PS/MID/C60 Top-Loading Autoclave

This autoclave was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. The previous owner has stated it was in good working order prior to removal.

Includes:

• Key

Olympus Lext OLS3100 Confocal Microscope w/ MM6-ASPS Controller & OLS3000 PSU

This was removed from a university lab where it was surplus to requirements.

The lab it was removed from confirmed it was in working order prior to removal but were unable to supply the software.

All parts power on and appear to be in working condition. The control unit and emergency stop button are working correctly. The stage control appears to be working correctly with a smooth motor. Only the cables shown are included.

The system is in good cosmetic condition, but the rubber foot ends are crumbling.

There is no software included with the system.

Items included:

Main Units:

Olympus Lext OLS3100

Dimensions: 464(W)x559(D)x620(H)mm

Weight: 56.5kg

Olympus MM6-ASPS Controller

Dimensions: 381(W)x304.8(D)254(H)mm

Weight: 14.33kg

Olympus OLS3000 Power Supply

Dimensions: 355.6(W)x177.8(D)355.6(H)mm

Weight: 9kg

Accessories:

Olympus U-DICR

Olympus U-P03

Olympus U-AN360-3

GE Healthcare ÄKTA System with Workstation and Software

This system was removed from a university laboratory where it was surplus to requirements.

All units are in good cosmetic condition and power on, we are unable to test the system further at our facility.

The Lenovo Thinkstation PC has Unicorn 5.01 and MassLynx V4.2 software installed and functioning correctly.

The system comprises the following:

Amersham Biosciences UV-900

Model: UV-900

Serial No.: 01148619

Amersham Biosciences P-900

Model: P-900

Serial No.: 01146904

Amersham Biosciences INV-907

Code No.: 18-1108-40

Serial No.: 01147887

Amersham Biosciences M-925

Code No.: 18-1118-89

Serial No.: 01146475

Amersham Biosciences CU-950

Serial No.: 2448

Lenovo Thinkstation PC with:

Unicorn 5.01

MassLynx V4.2

Keys included

NEC 17" Monitor

NEC Keyboard and Mouse

Amersham Biosciences pH/C-900 Monitor (Passed calibration)

GE AKTA Purifier UPC 10 FPLC System with FRAC-950 Fraction Collector

This system was removed from a university laboratory where it was surplus to requirements.

All included units power on and pair successfully, we could not test the system further at our facility.

They are all in good cosmetic condition.

Includes:

• AKTApurifier
• Box-900
• UFC-900
• P-900
• Frac-950

Synrad Firestar Series Ti FSTI80KFC Laser

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition. It has not been powered on due to testing limitations with Class 3 and above lasers at our facility.

No further testing has been performed.

Includes:

Synrad UC-200 Laser Controller

Model: UC-2000

Serial No.: UC20236052176

Scanlab HurryScan II 14 Galvanometer Scanner

Typ: HurryScan II 14

Serial No.: 307930

Logitech Attack 3 Joystick

Professional 2-Port USB to RS-232 Serial Adapter

Sky Tronic 5A Professional DC Regulated Power Supply

Model: 650.654UK

2 x Mean Well SP-100-15 Power Supplies

Mean Well RSP-1500-48 Power Supply

Life Technologies Ion Torrent System - Proton Semiconductor Sequencer & Ion Chef

This system was removed from a university where it was surplus to requirements.

All included units are in good cosmetic condition and power on, we are unable to test them further or as a system at our facility.

The previous owner stated it was in working order when last in use.

System includes;

Ion Torrent Proton Semiconductor Sequencer

• Model - Proton Semiconductor Sequencer
• S/N - 245644-0717

Comes with Ion Torrent P1 - DA003572

Ion Torrent Ion Chef Instrument

• Model - IONCHEF
• S/N - CHEF00212

Ion Torrent Ion OneTouch 2

• Model - Ion OneTouch 2 Instrument
• S/N - 2456450-2447

Ion Torrent Ion Touch ES

• Model - 8441-21
• S/N - 423928

Ion Torrent Ion Chip Minifuge

• Model - Ion Torrent Ion Chip Minifuge
• S/N - 1212 0929

Accessories

• Dell PowerEdge T620 Server
• 3 x wash bottles
• Honeywell Scanner
• 2 x Ion Chip 316

Infors HT Minitron Co2 Shaking Incubator w/ Humidity (2018)  

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in complete working order

1958 Commer Karrier Gamecock Fire Engine Food Truck Conversion

We are selling this vehicle on behalf of a client. It is surplus to requirements.

The vehicle is a non-runner and has been parked up for the last 18 months. It has been converted into a Food Truck and is installed with a pizza oven and other catering equipment.

Details on the issues are listed below;

• Issue: A valve failure has occurred due to a gas conversion that was done on this truck. The gas conversion was not in use but remained connected to the combustion chamber, leading to the valve failure.

• Actions if Required: Repair of the valve train and removal of gas conversion, these vehicles were not made for such conversions. It would require a new head gasket and accessories to go along with the head removal and replace affected valves without a full inspection to the engine I think that the minimal requirement to have a running truck again. These kind of repairs can only be carried out by a specialist.

Vehicle Details as per DVLA website:

Vehicle make KARRIER

Date of first registration: July 1958

Year of manufacture: 1958

Cylinder capacity: Not available

CO₂ emissions: Not available

Fuel type: PETROL

Euro status: Not available

Real Driving Emissions (RDE): Not available

Export marker: No

Vehicle status: Taxed

Vehicle colour: SILVER

Vehicle type approval: Not available

Wheelplan: 2 AXLE RIGID BODY

Revenue weight: Not available

Date of last V5C (logbook) issued: 3 February 2023

It is available for collection only from Warwick Uk.

Hudson Solo SOL9 Liquid Handler

This item was removed from a university lab where it was surplus to requirements.

The robot is in very good used condition and has been successfully tested for communication with the included

software.

The previous client has confirmed it being in working order.

System Includes:

• 1 x Hudson Solo SOL9 Robot with a multichannel dispensing head and 8 position deck (with PSU)
• 4 x 10cm Tall Nests
• 2 x 6cm Tall Nests
• 1 x 4.5cm Nest
• 2 x Torrey Pines Scientific RIC20 Remote Controlled Chilling/Heating Dry Bath Units:
• 1 with a TPS 620-5033 plate
• 1 with a TPS 620-5045 plate
• 2 x PSU's
• 1 x BioShake Heated Shaker Plate (marked as faulty)
• 2 x Boxes of 1000ul Pipette Tips (all sealed inside)
• 1 x Lenovo PC with keyboard, monitor & mouse running Windows 10 with Hudson control software installed
• 1 x Digi Edgeport 232 to USB adapter for controlling the RIC20 units

Thermo Scientific Class 2 Safe 2020 1.2 Biological Safety Cabinet

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in complete working order. (Socket tester not included.)

The lab reported it was in good working condition prior to removal

Please note; There is no filter fitted.

Thermo Elemental Model Type Solaar S2 AA Series Spectrometer

This item was removed from a facility where it was surplus to requirement.

It is in reasonably poor cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Some plastic panels are broken and or missing.

Included;

1 x Rubidium Data Coded Hollow Cathode Lamp. NC 9423 390 30371.

Binder CB160 E6.1 Co2 Incubator Double Stack 9140-0092

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and in good working order.

Includes:

• 3 x Shelves per unit
• 1 x Humidity tray per unit

Binder CB160 E6.1 Co2 Incubator Double Stack 9140-0092

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

Includes:

• 3 x Shelves per unit
• 1 x Humidity tray per unit

The lab confirmed the unit was in full working order prior to removal.

Multivac A300/51 Vacuum Sealer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

As it has been used in a lab setting it is only suitable for lab use again in the future. It is not to be used for commercial catering or food packing.

Digital CR Reader With Cassettes

This item was removed from a university where it was surplus to requirement.

The item is in good cosmetic condition.

It powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was in working order prior to removal.

No software is included.

S/N: 3985

Thermo Heto PowerDry LL3000 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

JEOL JSM 840A  SEM Scanning Electron Microscope System

This was removed from a university lab where it was surplus to requirements.

The lab confirmed it was in working order prior to removal, but the control panel was removed and sold separately. It has not been tested at all at our facility but it is in good cosmetic condition with marks from use.

Included are;

Main unit:

1 x JEOL JSM-840A Scanning Microscope

Model: JSM-840A

Serial#: EP130077

Item has attached:

1 x Oxford Instruments 6605

Serial#: 09091-3390-339-521

Power Supply Unit:

JEOL JSM-840A Main Power CSL

Model: JSM-840A Main Power CSL

Serial#: EP130077-40

Also included:

JEOL Pump

Model: N/A

Serial#: N/A

Good cosmetic condition.

Lx36Wx24Hx50cm

JEOL JSM-840A User Manual

JEOL JSM-840A Service Case

This contains:

JEOL Extender MP001569-01

Various washers, fixings, screws etc.

Carl Zeiss MCS 500 System & Multiplexer

These units were removed from a university lab where they were surplus to requirements.

Everything powers up and the lab confirmed it was in working order when last used.

Included are;

Carl Zeiss MCS 500 System Spektrometer BLX500-4 + MCS 522 UV-VIS

Model: MCS 500

Serial#: 028989

Carl Zeiss Multiplexer

Model: Multiplexer

Serial#: 021166

Carl Zeiss Enclosure

Model: Double Ch.Syst.

Serial#: 029050

RS-LINK 1.2

Serial#: 1806-1009

PSM-V24/FO-G/S (Qty. 2)