Workshop
Items 1 to 20 of 199
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
JK Lasers Class 4 MS20 Laser & Accessories Lab
ITEM-18384
This JK Lasers Class 4 MS20 Laser was removed from a university lab where it was surplus to requirements.
The unit came to us with a warning notice on it saying it is strictly not to be used or powered up under any circumstances. We suspect the university was removing it from their facilities for H&S reasons.
It is in reasonably good cosmetic condition but has some glue residue on the top of it and the wheels are stiff. There was also no key for the unit so we could not open the cabinet.
Lot contains:
1 x JK Lasers Class 4 MS20 Laser.
1 x Metal Plate.
1 x Shutter/Fire Switch.
1 x YAG Laser Flashlamp/Q-Switch Controller Glued Together.
The unit is sold for spares/repairs. We can only accept business customers for this item and any potential customer will be required to sign a disclaimer during purchase.
All offers considered on the unit.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
Applied Biosystems 7900HT Fast Real-Time PCR System Spares/Repairs
ITEM-20178
This Applied Biosystems 7900HT Fast Real-Time PCR System was removed from a university lab where it was surplus to requirements. The lab assured us this system was in full working order prior to removal from the lab.
The unit no longer powers up as the PSU blew in testing.
The included PC has Applied Biosystems software on it and it connected with the PCR unit prior to the PSU blowing, but as there is no barcode reader and robot it did not initialise further than this.
It is in good cosmetic condition with only limited marks from use. Inside we found the keys to enable the laser.
There is an instrument log book and a serial cable included with it.
It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
Sanyo MCO-17A CO2 Laboratory Incubator Lab Spares/Repairs
ITEM-21193
This Sanyo MCO-17A CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.
We powered the unit on with no issues and checked the temperatures with a digital thermometer (not included).
When set to 37˚C the display showed 39˚C and the thermometer measured 41˚C.
When set to 56˚C the display showed 56˚C and the thermometer measured 49.9˚C.
The unit has issues with CO2 regulation and is sold for spares/repairs.
Internal sizes are 49 (L) x 50(W) x 66(H) cm with three shelves.
The item is in very good condition with minor age and usage marks. The door handle is broken but it still operates and does not stop the unit from operating correctly.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
Beckman Coulter Allegra 6R Centrifuge Lab Spares/Repairs
ITEM-36589
Beckman Coulter Allegra 6R Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up but does not operate. We believe it to have a faulty drive belt.
It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
SCOTSMAN AF100 Ice Flaker Machine Lab Spares/Repairs
ITEM-38267
SCOTMAN AF100 Ice Flaker Machine
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has a fault with the evaporation temperature and/or an issue with the auger rotation. It is also leaking water.
It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
Thermo Scientific HERA CELL 240i CO2 Incubator Spares/Repairs
ITEM-38700
This Thermo Scientific HERA CELL 240i CO2 Incubator was removed from a univerversity lab where it was surplus to requirements.
The unit powers up and the incubation functions works, but it is showing. CO2 Senor Breakage error. For this reason it is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair
ITEM-39813
New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair
This was removed from a university lab where it was surplus to requirements.
The unit powers up and the incubation function works, but the unit does not shake (the thermometer used for testing is not included).
It is in reasonably good cosmetic condition with minor marks.
It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 495.00 (ex. VAT) 1 in stock
DW Scientific Whitley Automated Spiral Plater (WASP) System Spares/Repairs
ITEM-39864
This DW Scientific Whitley Automated Spiral Plater was removed from a university lab where it was surplus to requirements.
The unit powers up but did not initiate any sort of self-test on start up. The lab advised us it was faulty.
It is sold for spares/repairs.
Additional items included:
Spiral Plater Tool Kit
Vacuum Sealed Pots x 2
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Luminex 200 Multiplex Assay System & Software Lab Spares/Repairs
ITEM-20618
Luminex 200 Multiplex Assay System
This was removed from a university lab where it was surplus to requirements.
The unit powers up but has a faulty laser. The bead position readings are fine but the laser has a 0 reading.
It is in good cosmetic condition with minor marks.
It is sold for spares/repairs.
Model - Luminex XYP (Bottom)
SN - LXY07131101
Model - Luminex 200 (Top)
SN - LX10007129405
Model - Luminex SD
SN - LXSD07116004
Comes with:-
STarSystems User Information Manual/Binder
Luminex 200 Installation Manual
Tubing and Cables
Luminex XMAP Technology Automated Maintenence Plate
Box of Software including:-
Black Dongle - DK2 for use with STarBase Analysis Software
Purple Dongle - Soft Flow FCAP Array V1.0
STarBase 1.0 (SN 00035) with Dongle
WorklistEditor Software for STarStation V 2.0
STarCollate Software V 2.0 (C20040)
STarStation Software V 2.3 (S23089)
BD FCAP Array Software V 1.0.1
Luminex LX100/200 Verification Kit
Luminex LX100/200 Calibration Kit
XPonent 3.1 for Luminex 100/200
XPonent 3.1 for Luminex 100/200 (7129 Patch)
Luminex 200 Firmware Update V 2.6.1
Luminex 100 IS Software V 2.3 with Assay Developers Workbench
Luminex Manuals and Online Help for Luminex 200 with IS 2.3 Software and Developers Workbench.
Dell E1777FP LCD Monitor Drivers and user Documentation
Dell Drivers and Utillities
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Teledyne Isco CombiFlash Companion TS Personal Flash Chromatography System Lab
ITEM-24519
Teledyne Isco CombiFlash Companion TS Personal Flash Chromatography System Lab
This was removed from a university lab where it was surplus to requirements.
The system powers up but the tablet will not communicate with the PC. It is in other wise good cosmetic condition with minor marks, but is sold for spares/repairs.
Included are;
Teledyne Isco CombiFlash Companion
Model - Combiflash Companion
SN - 207B20161
3 Tube Racks:-
The one slotted in the unit holds 100 x 15ml tubes
One holds 144 x 5ml tubes and has 99 Glass 5ml tubes included
One holds 100 x 15ml tubes and has 32 Glass 15ml tubes included
Fujitsu Siemens Tablet:-
Model - Stylistic ST5010
Part no. CP183709
SN - YBKT011032
Comes with Protective case, mouse and cables/adaptor.
Tablet has CombiFlash Companion Software
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Beckman Coulter LS230 Particle Size Analyser w/ Fluid Module - Spares / Repairs
ITEM-25210
Beckman Coulter LS230 Particle Size Analyser w/ Variable Speed Fluid Module
This was removed from a university lab as it was reported to be faulty. We were not informed what the fault is.
Included in the system are;
1x LS230 Particle Size Analyser
The unit is in good condition but there seem to be quite a few parts taken from the unit. It powers up but was not tested further.
1x LS Variable Speed Fluid Module Plus
The unit is in good cosmetic condition. It powers up but was not tested further.
There is a manual included.
It is sold for spares/repairs due to the suggested fault.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Beckman Coulter LS200 Particle Size Analyser Spares Repairs - Lab
ITEM-25211
Beckman Coulter LS200 Particle Size Analyser w/ Variable Speed Fluid Module
This was removed from a university lab as they reported it had developed a fault. We do not know what the fault is.
Included in the system are;
1x 1x LS200 Particle Size Analyser
The unit is in reasonable condition but there seem to be quite a few parts taken from the unit. We did not power on the unit due to safety precautions.
1x LS Variable Speed Fluid Module Plus
The unit is in good cosmetic condition. We did not power it up as it requires power to the LS200 but it was reported faulty by the lab.
Unit is sold as spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Thermo Electron Holten LaminAir Microbiological Class 2 Safety Cabinet Faulty
ITEM-31222
This Thermo Electron Holten LaminAir Microbiological Class 2 Safety Cabinet was removed from a university lab where it was surplus to requirements.
The unit powers up and the airflow and lights work. There is no UV light fitted. The windows do not function as the cables that hold it up and damaged and not connected.
It is in otherwise good cosmetic condition with minor marks.
It is sold for spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Pyrosequencing PSQ96 Pyrosequencer Lab Spares/Repairs
ITEM-31384
This Pyrosequencing PSQ96 Pyrosequencer was removed from a university lab where it was surplus to requirements.
The unit does not power up and fails a visual PAT test due to exposed wires at the back.
It is in reasonably good cosmetic condition with minor marks from use.
Block - 96 x 0.2ml
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Peak Scientific PH600-UK Lab Hydrogen Generator Spares/Repairs
ITEM-35386
This Peak Scientific PH600-UK Hydrogen Generator was removed from a university lab where it was surplus to requirements
Item is in good cosmetic condition with minor marks but is missing side panel screws and parts have been removed.
Since no tests have been conducted, we have listed this item as spares/repairs.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Reichert Jung UltraCut Microtome 701701 Ultramicrotome + Controller Faulty
ITEM-35659
Reichert Jung UltraCut Microtome 701701 Ultramicrotome + Controller
This was removed from a university lab where tiwas surplus to requirements.
None of the units powered up in testing and are sold for spares/repairs.
It is in reasonably good cosmetic condition with marks from use.
Included are;
Reichert Jung UltraCut Microtome 701701 Ultramicrotome
Model: 701701
Serial#: 365615
10 x W.F. Cat. 145 Eyepiece (Qty 2)
Dust Cover
Reichart-Jung ULTRACUT Manual
Reichart Controller
Model: 65 11 01
Serial#: 69434
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Buchi Distillation Chiller Model B-741 Lab Spares/Repairs
ITEM-41105
Buchi Distillation Chiller Model B-741
This was removed from a university lab where it was surplus to requirements.
The unit failed a visual PAT as it is missing the side panel test and was not tested further.
It is sold for spares/repairs
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
Applied Biosystems 7900HT Fast Real-Time PCR System Lab
ITEM-41278
Applied Biosystems 7900HT Fast Real-Time PCR System Lab
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and powers up, however it is unable to connect to a PC due to an issue with the communication port.
Therefore, it is listed as Spares/Repair.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 490.00 (ex. VAT) 1 in stock
B.O.B Stevenson Type 355 BI/J Centrifugal Fume Extraction Fan
ITEM-41464
B.O.B Stevenson Type 355 BI/J Centrifugal Fume Extraction Fan
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
The unit has no cabling and is sold for spares/repairs
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 485.00 (ex. VAT) 1 in stock
6 x Laerdal Vitalsim Vital Signs Simulators
ITEM-29947
6 x Laerdal Vitalsim Vital Signs Simulators
These were removed from a university lab where they were surplus to requirements.
All main units power on and all of the parts are in reasonable cosmetic condition. Some units are missing parts from the bags, and one does have a broken power connection on the back of the main unit which is also labelled.
They are sold as a spares/repairs lot.
Items 1 to 20 of 199