Workshop

SPARES/REPAIR ITEM

£ 485.00 (ex. VAT) 1 in stock

Hitachi Lachrom HPLC System - L-7000, L-7200, L-7100, L-7400 Lab Spares/Repairs

ITEM-30327

This Hitachi Lachrom HPLC System was removed from a university lab where it was surplus to requirements.

Included in the system are;

1x Hitachi Lachrom Sampler L-7200

Part No. 810-0202

The unit powers on and is in good cosmetic condition.

•RAM Check -OK

•Memory Check -ERROR

•Syringe Initialising -OK

Injection Valve Initialising -ERROR

We were unable to remove the errors.

2x Hitachi Lachrom L-7100:

Part No. 810-0101

Part No. 810-0102

The units both power on and are in good cosmetic condition. There are some scuffs, scratches and surface stains from general use. The LCD display was quite dimly lit. We were unable to select any options.

•Message D LINE SYSTEM IS NOT READY appears on both units

2x Hitachi Lachrom UV Detector L-7400:

Part No. 810-0402

One of them powers up, but the other trips the electrics in or testing facility.

The units are in good cosmetic condition,

There are some scuffs scratches and surface stains from general use.

2x Hitachi Lachrom L-7000: Unit No. 810-5116

One power up, and the other does not.

The units are in good cosmetic condition,

There are some scuffs scratches and surface stains from general use.

2x Hitachi Lachrom Organizers (storage compartments)

Part No. 810- 4940

Part No. 810-9900

The units are in good cosmetic condition. There are some scuffs, scratches and surface rust from general use.

Accessories:

1x FPLC Column INV-917:

Code No. 18-1147-23

The unit is in good cosmetic condition.

1x Gilson System Interface:

Model. 506C

The unit powers on and is in good cosmetic condition.

1x Anachem Power supply:

230v - 50Hz / 150mA

The unit powers on and is in good cosmetic condition.

1x Jones Chromatography Box w/ Serial cable:

Ser No. 13949

The unit and cable are in good cosmetic condition

25 Pin Male to RS232 to 25PIN Male adaptor.

The cable and adaptor are in good cosmetic condition.

3x Ethernet cables:

The units are in good cosmetic condition.

SPARES/REPAIR ITEM

£ 485.00 (ex. VAT) 1 in stock

29 x Various Vortex Mixers Stuart, Clifton & Hati Lab

ITEM-39692

29 x Various Vortex Mixers Stuart, Clifton & Hati

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.

The units have not been tested at all.

SPARES/REPAIR ITEM

£ 485.00 (ex. VAT) 1 in stock

Amersham Biosciences Ettan Digestor System, 215 Liquid Handler, VALVEMATE

ITEM-39894

Amersham Biosciences Ettan Digestor System, 215 Liquid Handler, VALVEMATE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a PC and software (not included).

The unit fails the initial Homing sequence. It does appear to start Homing and the robot moves, but after a few seconds it stops and makes a buzzing noise, like it is jammed.

It is in good cosmetic condition with minor marks but is sold for spares/repairs.

All additional parts & accessories included:

Ettan Digester Control Software 1.10

Amersham Calibration Plate - SN#: 18-1156-66

Syringe 500uL Digester - SN#: 18-1170-86

Calibration Tool Ettan Digester - SN#: 18-1175-79

Allen Key 1,5mm

Distance Tool Ettan Digester - SN#: 18-1175-55

Ettan Digester Instrument Handbook

Ettan Digester User Manual

Ettan Digester Safety Handbook

Reference Markers 1120pcs - SN#: 18-1143-34

Fuse Drawer 110/120 V

Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003

Arm Lock

SPARES/REPAIR ITEM

£ 480.00 (ex. VAT) 1 in stock

New Brunswick Galaxy 14 S CO2 Incubator Lab

ITEM-39687

New Brunswick Galaxy 14 S CO2 Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but requires a new CO2 solenoid. It will not inject CO2.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Dionex ASE 200 Solvent Extractor Lab Spares/Repairs

ITEM-25096

Dionex ASE 200 Solvent Extractor Lab Spares/Repairs

This was removed from a university lab where it was surplus to requirements.

The unit powers on but needs a new static valve.

The front panel of the item shows ASE 300, but we think this has been replaced with a mislabeled panel.

it is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Dionex DX80 Analyzer Lab Spares/Repairs

ITEM-26222

Dionex DX-80 Analyzer

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we are told it was not in working order prior to collection. The pump is faulty.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

BOC CRYOSPEED DryStore 23 Liquid Nitrogen Sample Storage Dewar Faulty

ITEM-29973

BOC CRYOSPEED DryStore 23 Liquid Nitrogen Sample Storage Dewar Faulty

This was removed from a university lab where it was surplus to requirements.

The unit is in good condition but we were told the lid doesn't seal properly when in use.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Nuaire NU-5500E Thermal Control Status CO2 Laboratory Incubator Lab Faulty

ITEM-30286

Nuaire NU-5500E Thermal Control Status CO2 Laboratory Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up but is massively out of calibration. It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Panasonic MCO-20AIC CO2 Incubator Lab Spares/Repairs

ITEM-30445

This Panasonic MCO-20AIC CO2 Incubator was removed from a university lab where it was surplus to requirements.

The unit does not power up and trips the fusebox in our testing room.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Orbit Marine AL-7200-3M Tracking Controller Lab Faulty Screen

ITEM-30591

This Orbit Marine AL-7200-3M Tracking Controller was removed from a university lab where it was surplus to requirements.

The unit powers up but the screen is faulty. The unit will output to an external monitor through VGA out and does run. It was not tested further.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Sanyo CO2 Incubator MCO-18AIC Lab Spares/Repairs

ITEM-36949

Sanyo CO2 Incubator MCO-18AIC

This was removed from a university lab where it was surplus to requirements.

The unit powers up but requires a new sample pump.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Binder CO2 Laboratory Incubator CB 150 Lab Spares/Repairs

ITEM-38904

Binder CO2 Laboratory Incubator CB 150

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been temperature tested (thermometer not included). However, the CO2 sensor is missing, therefore we are unable to test it any further.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 475.00 (ex. VAT) 1 in stock

Amersham Biosciences Ettan Spot Picker, Various Parts & Accessories Faulty

ITEM-39895

Amersham Biosciences Ettan Spot Picker

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a PC from another system.

The robot appears to initialise and Home fine. When you try to control it manually, small X,Y & Z movements all seem fine. If you try to send it to a specific location it moves and then shows a 20000 error. 'An internal error has occurred' 'wait for moved failed'. It then needs to re-home again.

We cannot find any info for this error, but it does it every single time.

It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 470.00 (ex. VAT) 1 in stock

Stratasys Dimension SST 768 Commercial 3D Printer - Spares/Repairs

ITEM-36514

Stratasys Dimension SST 768 Commercial 3D Printer

This was removed from a university lab where it was surplus to requirements.

The unit fails PAT testing on insulation and also tripped testing room fuse board when plugged in.

It is in reasonable cosmetic condition but has cracks and marks from use, including damage to the window.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 460.00 (ex. VAT) 1 in stock

SciQuip Incu-270S Incubator Model - ZDP-A2270A Lab Spares/Repairs

ITEM-38906

SciQuip Incu-270S Incubator Model - ZDP-A2270A

This was removed on from a working lab. It was surplus to requirements.

The item is in a reasonable, used cosmetic condition.

The unit has no power cable and has not been tested.

It is sold for spares/repairs.

2 x Shelves 59.5 x 53cm

SPARES/REPAIR ITEM

£ 455.00 (ex. VAT) 1 in stock

VG Micromass Q4 Model - M310 Rackmount Module Lab Spares/Repairs

ITEM-18448

This VG Micromass Q4 Model - M310 was removed from a university lab where it was surplus to requirements.

We have not tested the unit as it requires a specific power lead that we do not have access to. It is in reasonably good cosmetic condition and is either missing the top panel or never had one as it was part of a rack unit.

It is sold for spares/repairs as it is a PAT test fail. It is missing the top panel which means it would fail on a visual test.

SPARES/REPAIR ITEM

£ 450.00 (ex. VAT) 1 in stock

Beckman Coulter EPICS XL Flow Cytometer With System II Software Lab

ITEM-12754

This system was removed from a Lab as it was surplus to requirement.

The main system does not power on. We have checked power supply but we cannot diagnose any further. Due to the power fault this system will be sold as Spares or Repair.

The PC is included and contains System 2 Software. This runs on MSDOS

User manuals and guides for this software are included.

The system is in generally good condition but the White waste connection is snapped in its fitting and one of the AMP connectors is bent.

SPARES/REPAIR ITEM

£ 450.00 (ex. VAT) 1 in stock

Heraeus Hera Cell 240 CO2 Laboratory Incubator with Trolley Lab Spares/Repairs

ITEM-19302

This Heraeus Hera Cell 240 CO2 Laboratory Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up but the sample pump failed.

It is in reasonably good cosmetic condition with some marks from use.

Internal dimensions - D56 X W60 H67cm

6 Shelves 50 x 27cm

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 450.00 (ex. VAT) 1 in stock

Sorvall RT6000D Refrigerated Centrifuge Lab Spares/Repairs

ITEM-31464

This Sorvall RT 6000D Refrigerated Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up and runs, but does not cool. It seems to have a compressor fault

It is in good cosmetic condition with minor marks.

Sorvall H1000B Rotor

3600 Max RPM

4 x Du Pont Buckets (PN-11053)

2 x Blue Adaptors (Holds 4 x 50ml each)

2 x Black Adaptors (Holds 10 x 15ml each)

It is sold for spares/repairs

SPARES/REPAIR ITEM

£ 450.00 (ex. VAT) 1 in stock

Dionex ASE 200 Accelerated Solvent Extractor Lab Spares/Repairs

ITEM-35685

Dionex ASE 200 Accelerated Solvent Extractor

This was removed from a university lab where it was surplus to requirements. The lab confirmed the unit was faulty but were unable to confirm the nature of the fault.

It powers up fine, but we were unable to test it further without access to nitrogen gas.

It is in good cosmetic condition with minor marks.

It is sold for spares/repairs.

Workshop

Filters