Our Biotechnology category offers a comprehensive selection of high-quality, second-hand equipment designed to support cutting-edge research. Specializing in genomics, laboratory automation, hybridisation, fermenters, and bioreactors, our range prioritizes quality and reliability for laboratories, universities, and research facilities.


Equipment undergoes varying levels of testing, including functionality checks, calibration, and performance assessments, ensuring tailored solutions to meet the specific needs of your biotechnology projects.

Items 251 to 300 of 330

Image of Anthos Labtec Microplate Reader  Rosys Anthos Lucy 1  Type - 16 800 Lab

£ 295.00 (ex. VAT) 1 in stock

Anthos Labtec Microplate Reader Rosys Anthos Lucy 1 Type - 16 800 Lab

ITEM-19451

This Anthos Labtec Micro Plate Reader  Rosys Anthos Lucy 1  Type - 16 800 was removed from a university lab where it was surplus to requirements.


The unit powers up and a lot of different errors we showing. We were unable to test it further.


It is in good cosmetic condition with only light marks from use.



Image of KOPF Model 730 Needle/Pipette Puller Lab

£ 275.00 (ex. VAT) 1 in stock

KOPF Model 730 Needle/Pipette Puller Lab

ITEM-31910

This KOPF Model 730 Needle/Pipette Puller was removed from a university lab where it was surplus to requirements.


The unit powers up but we were unable to test it further.


It is in good cosmetic condition with marks from use.

Image of GeneMachines OmniGrid Accent MGR-02 Benchtop MicroArraying Bio Printer Lab

£ 270.00 (ex. VAT) 1 in stock

GeneMachines OmniGrid Accent MGR-02 Benchtop MicroArraying Bio Printer Lab

ITEM-20043

This GeneMachines OmniGrid Accent Benchtop MicroArraying Platform Bio Printer was removed from a university lab where it was surplus to requirements.


The units all power up but have not been tested further.


Included are;


1 x OMNI GRID ACCENT Model: MGR-02


1x Gast Vacuum Pump Model: 0523-101Q-G588DX


Everything is in reasonably good cosmetic condition but the side panels have come off the omni grid.


Also included are:


1x Digital Temperature Control disk ver 2.8

1x filter

3x bags of unopened wires/cables



Image of Biometra UNO II Thermoblock w/ 96 Block for 0.2ml Tubes Lab

£ 265.00 (ex. VAT) 1 in stock

Biometra UNO II Thermoblock w/ 96 Block for 0.2ml Tubes Lab

ITEM-20718

This Biometra UNO II Thermoblock was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included).


When set to 37˚C the display showed 37˚C and the thermometer measured 36˚C.

When set to 99.9˚C the display showed 100˚C and the thermometer measured 99.9˚C.

When set to 0˚C the display showed -1˚C and the thermometer measured -1˚C.


It seems to be in working order.


It is in reasonably good cosmetic condition with some marks from use.


Image of Biometra UNO II Thermoblock Thermal Cycler w/ 48 Block for 0.2ml Tubes Lab

£ 265.00 (ex. VAT) 1 in stock

Biometra UNO II Thermoblock Thermal Cycler w/ 48 Block for 0.2ml Tubes Lab

ITEM-20719

Biometra UNO II Thermoblock Thermal Cycler w/ 48 Block for 0.2ml Tubes


This was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included).


When set to 37˚C the display showed 37˚C and the thermometer measured 36.5˚C.

When set to 99.9˚C the display showed 100˚C and the thermometer measured 99.4˚C.

When set to 0˚C the display showed -1˚C and the thermometer measured -1˚C.


It seems to be in working order.


It is in reasonably good cosmetic condition with some marks from use.

Image of UVP Gel Documentation System 97-0070-02 w/ Camera & PSU Lab

£ 265.00 (ex. VAT) 1 in stock

UVP Gel Documentation System 97-0070-02 w/ Camera & PSU Lab

ITEM-24761

This UVP Gel Documentation System was removed from a university lab where it was surplus to requirements.


Included in the system are;


1 x UVP Gel Documentation System

Model No. 97-0070-02

The unit powers on and is in good cosmetic condition. All buttons appear responsive to the unit. It was not tested further


1 x UVP Camera

Model 4912-5110/0000

The unit powers on and is in good cosmetic condition but it was not tested further.


4x Cables:

3x BNC Cables

1x AUX cable


1 x Camera Power Supply.

Model RS 597-762

The unit powers on and is in good cosmetic condition. A green light on the back of the camera lit once the PS was powered up.




Image of Bio-Rad Dyad Disciple Peltier Thermal Cycler PTC0221 2-48 Well & 96 Well Block

£ 265.00 (ex. VAT) 1 in stock

Bio-Rad Dyad Disciple Peltier Thermal Cycler PTC0221 2-48 Well & 96 Well Block

ITEM-36926

Bio-Rad Dyad Disciple Peltier Thermal Cycler PTC0221 2-48 Well & 96 Well Block


This was removed from a university lab where it was surplus to requirements.


The unit powers up but we were unable to test it without the control unit.


Bio-Rad Dyad Disciple Peltier Thermal Cycler

Model - PTC0221

SN - DY005562


2-48 Well Alpha Unit Block Assembly

SN - AL037212


96 Well Alpha Unit Block Assembly (ALP2296)

SN - AL110470


Holds 0.2ml vials




Image of UVP DigiDoc-IT Gel Imaging System with Transilluminator TFM-20 lab

£ 260.00 (ex. VAT) 1 in stock

UVP DigiDoc-IT Gel Imaging System with Transilluminator TFM-20 lab

ITEM-19450

This UVP DigiDoc-IT Gel Imaging System was removed from a university lab where it was surplus to requirements.


Included are;


1 x UVP 25W Transilluminator

Model - TFM-20

PN - 95-0286-02


1 x UVP BioImaging Systems DigiDoc-IT System

PN - 97-0105-01


The transilluminator powers up and the UV light works on both the low and high settings. It was not tested further.


It is all in reasonably good cosmetic condition with marks from use.



Image of Labtech G-Storm Thermal Cycler  Model - GS0002M Lab

£ 260.00 (ex. VAT) 1 in stock

Labtech G-Storm Thermal Cycler Model - GS0002M Lab

ITEM-20376

This Labtech G-Storm Thermal Cycler  Model - GS0002M was removed from a university lab where it was surplus to requirements.


The unit has 2 X 96 well blocks for 0.2ml tubes.


It powers on and has been tested with a digital thermometer (not included).


Left block:-

When set to 37˚c the thermometer read 36.4˚c.

We then set it to the max temp of 99˚c and the thermometer read 97.1˚c

Finally set to the minimum temp of 4˚c and it cooled down fast, the thermometer read 5˚c.


Right block:-

When set to 37˚c the thermometer read 36.7˚c

We then set it to the max temp of 99˚c and the thermometer read 97.9˚c

Finally set to the minimum temp of 4˚c and it cooled down fast, the thermometer read 4.7˚c.


It all appears to be working well.


It is in reasonably good cosmetic condition with marks from use.


Image of G-Storm GS1 Thermal Cycler GS00001 96 x 0.1ml Lab

£ 260.00 (ex. VAT) 1 in stock

G-Storm GS1 Thermal Cycler GS00001 96 x 0.1ml Lab

ITEM-32079

This G-Storm GS1 Thermal Cycler GS00001 96 x 0.1ml was removed from a university lab where it was surplus to requirements.


The unit powers up, and is in good working order.


It is in good cosmetic condition with minor marks from use.



Image of MJ Research DNA Engine PTC-200 Thermal Cycler Lab

£ 255.00 (ex. VAT) 1 in stock

MJ Research DNA Engine PTC-200 Thermal Cycler Lab

ITEM-25988

This MJ Research DNA Engine PTC-200 Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit is in full working order. It comes with a 384 well block which has been tested at 37ºC and 99ºC.


It is in reasonably good cosmetic condition with some minor marks from use.






Image of Bio-Rad Chemi Doc Imaging System, Universal Hood, Camera & Transilluminator Lab

£ 250.00 (ex. VAT) 1 in stock

Bio-Rad Chemi Doc Imaging System, Universal Hood, Camera & Transilluminator Lab

ITEM-10107

Bio-Rad Chemi Doc Imaging System, Universal Hood, Camera & Transilluminator


This unit was removed from a university lab where it was surplus to requirements.


The unit powers on and all functions seem to be working fine. The UV and white lights are working and the camera sounds like it is adjusting focus when powered on. It has not been tested further than this.


We do not have any software for this unit.

Image of Labtec ELISA Microplate Reader LT-5000ms Lab

£ 250.00 (ex. VAT) 1 in stock

Labtec ELISA Microplate Reader LT-5000ms Lab

ITEM-23940

This Labtec ELISA Microplate Reader LT-5000ms was removed from a university lab where it was surplus to requirements.


The unit powers up and goes into stand-by mode as it is not connected to a system.


It is in very good cosmetic condition with some marks from use. It comes with a user manual.

Image of Promega Maxwell 16 Clinical Instruments Blood DNA Purification System Lab

£ 250.00 (ex. VAT) 1 in stock

Promega Maxwell 16 Clinical Instruments Blood DNA Purification System Lab

ITEM-29844

This Promega Maxwell 16 Clinical Instruments Blood DNA Purification System was removed from a university lab where it was surplus to requirements.


The item is in good condition with minor use marks and missing front feet.


This item powered on and ran through a cycle without any issues, but hasn't been tested further.


Last recorded service date: 08:03:2016.


Internal dimensions: L14cm x W26cm x H17cm.

Image of FluidX Xcap Model HT124C Decapper Lab

£ 250.00 (ex. VAT) 1 in stock

FluidX Xcap Model HT124C Decapper Lab

ITEM-34736

This FluidX Xcap Model:HT124C was removed from a university lab where it was surplus to requirements.


This item powers up and is in good cosmetic condition. It has not been tested further.

Image of Labtech G-storm GS0001 Laboratory Thermal Cycler Lab

£ 250.00 (ex. VAT) 1 in stock

Labtech G-storm GS0001 Laboratory Thermal Cycler Lab

ITEM-34844

This Labtech G-storm GS0001 Laboratory Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested through cycles. It is in good working order.


It is in good cosmetic condition with marks from use.

Image of 5 x Fluidigm C1 Single Cell Auto Prep Systems mRNA Sequencers Lab

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 250.00 (ex. VAT) 1 in stock

5 x Fluidigm C1 Single Cell Auto Prep Systems mRNA Sequencers Lab

ITEM-38287

5 x Fluidigm C1 Single Cell Auto Prep Systems mRNA Sequencers


This job lot of items comes from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities.


None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well.


None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.


They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

Image of MJ Research DNA Engine Opticon 2 CFD-3220 System w/ Software Lab

£ 250.00 (ex. VAT) 1 in stock

MJ Research DNA Engine Opticon 2 CFD-3220 System w/ Software Lab

ITEM-44987



MJ Research DNA Engine Opticon 2 CFD-3220


This system was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition and powers on. It successfully connects to software and a PC, and programs run as expected.


Software:

  1. Opticon 2 - Version 3.0

Temperature Testing:

  1. Tested at 37.0ºC, 105.0ºC, and back to 0.0ºC

Image of Appligene Etuve Hybrid 91 Hybridisation Oven

£ 250.00 (ex. VAT) 1 in stock

Appligene Etuve Hybrid 91 Hybridisation Oven

ITEM-39969

This Appligene Etuve Hybrid 91 Hybridisation Oven was removed from a university lab where it was surplus to requirements.


The item powers on and is in a reasonably used cosmetic condition.


The rotation works to the dial speed setting. The temperature was tested with a digital thermometer (not included).

Image of Hybaid Shake n Stack Hybridisation Oven HBSNSRS220 Lab

£ 250.00 (ex. VAT) 1 in stock

Hybaid Shake n Stack Hybridisation Oven HBSNSRS220 Lab

ITEM-36651

This Hybaid Shake n Stack Hybridisation Oven was removed from a university lab where it was surplus to requirements.


The item powers on and is in reasonably good cosmetic condition.


The rotation works accurately with the dial speed setting. The temperature was tested with a digital thermometer (not included).

Image of Scie-Plas TV200 Twin Plate Format Mini Gel Electrophoresis Tank & Accessories

NEW ITEM

NEW ITEM

£ 245.00 (ex. VAT) 1 in stock

Scie-Plas TV200 Twin Plate Format Mini Gel Electrophoresis Tank & Accessories

ITEM-18519

This Scie-Plas TV200 Twin Plate Format Mini Gel Electrophoresis Tank & Accessories was removed from a university lab where it was surplus to requirements.


The unit and accessories are brand new and unused.


Lot Contains:

1 x Original Box And Packaging.

1 x Scie-Plas TV200 Twin Plate Format Mini Gel.

1 x Sealed Lid.

1 x Sealed HV Cords.

1 x Instructional Manual.

1 x Sealed White Plastic Block.

1 x Sealed Bag of Other Accessories

4 x Sealed Glass Plates.


Image of Hybaid Mini 10 Hybridisation Rotary Laboratory Oven Lab

£ 240.00 (ex. VAT) 1 in stock

Hybaid Mini 10 Hybridisation Rotary Laboratory Oven Lab

ITEM-38662

Hybaid Mini 10 Hybridisation Rotary Laboratory Oven


This was removed from a university lab where it was surplus to requirements.


The unit powers up and the incubation and rotisserie functions are working well. (Digital thermometer not included).


It is in good cosmetic condition with minor marks.


No bottles/tubes are included, but there is a set of caps with it.

Image of Robbins Scientific Micro Hybridization Incubator  Model 2000  Cat no. 1040-50-2

£ 240.00 (ex. VAT) 1 in stock

Robbins Scientific Micro Hybridization Incubator Model 2000 Cat no. 1040-50-2

ITEM-19440

This Robbins Scientific Micro Hybridization Incubator  Model 2000  Cat no. 1040-50-2 was removed from a university lab where it was surplus to requirements.


The unit powers up and the tube rotator is working, though one tube grip is missing.


It was tested with a digital thermometer (not included). It was set to 37˚C which it reached and held at. It was then set to the max of 99˚C which it reached after about 20 minutes. Our thermometer read 101˚C.


It is in reasonably good cosmetic condition with some marks from use.


It comes with 3 x Hybaid Glass Bottles with Bottle Grippers HB-OV-BGL


Internal dimensions - D18 x W35 x H20cm


Image of  SYNGENE DigiGenius Safety Hood & Canon Camera for UV Gel Imaging System Lab

£ 230.00 (ex. VAT) 1 in stock

SYNGENE DigiGenius Safety Hood & Canon Camera for UV Gel Imaging System Lab

ITEM-19452

This  SYNGENE DigiGenius Safety Hood & Canon Camera was removed from a university lab where it was surplus to requirements.


The unit units are all in good cosmetic condition with some marks from use. The system is missing the transilluminator.


Included are;

1 x Syngene DigiGenius Safety Hood


1 x Camera - Canon PowerShot G9

12.1 Mega Pixels

PC1250

No. 6531313267

Lens Adaptor - Hoya 58mm +4

UV Filter - UV032

The camera Powers on when Battery is charged. A Canon Battery charger is included but no power supply.




Image of GE Lunar Pixi Densitometer Machine with Trolley and Carry Case - X-Ray Lab

£ 230.00 (ex. VAT) 1 in stock

GE Lunar Pixi Densitometer Machine with Trolley and Carry Case - X-Ray Lab

ITEM-20334

This GE Lunar Pixi Densitometer Machine was removed from a university lab where it was surplus to requirements.


The unit is in reasonable condition with scratches along the surface/edges. The carry case has dirt marks.


The item powered on without issue but we did not test it further. The unit will require inspection and certification by a competent engineer prior to use.


Included are;


1x X-Ray Source

Model: Pixi


1x X-Ray Housing

Model: X2608


1x X-Ray Tube

Model: SXR-80-14-2A


1x X-Ray Controller Assy

Model: 30037


1x Pixi QC Heel Phantom

1x Lunar Pixi Carry case

1x Trolley

1x Table

Image of UVP UV Crosslinker CX-2000 Lab

£ 230.00 (ex. VAT) 1 in stock

UVP UV Crosslinker CX-2000 Lab

ITEM-31574

UVP UV Crosslinker CX-2000 Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Image of Peqlab Gel Documentation Imaging System Quantum-ST4 1100 - 26MX XPRESS Lab

£ 225.00 (ex. VAT) 1 in stock

Peqlab Gel Documentation Imaging System Quantum-ST4 1100 - 26MX XPRESS Lab

ITEM-23368

Peqlab Gel Documentation Imaging System Quantum-ST4 1100 - 26MX XPRESS


This was removed from a university lab where it was surplus to requirements.


The unit powers up and both the white and UV lights work. It has not been tested further.


Inside dimensions - D35 W39 H43cm

Camera lens 52mm +1.5


The item is in a reasonably good cosmetic condition with some marks from use.


Image of Peqlab Peqstar 96 Universal Thermal Cycler Lab

£ 220.00 (ex. VAT) 1 in stock

Peqlab Peqstar 96 Universal Thermal Cycler Lab

ITEM-20395

This Peqlab Pepstar 96 Universal Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested with a digital thermometer (not included)


It reached 95˚C when set and cooled down quickly to 37˚C when changed to that temperature.


It is in reasonably good cosmetic condition with some marks from use.


Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.

Image of Hybaid Shake n Stack Hybridisation Oven Lab

£ 220.00 (ex. VAT) 1 in stock

Hybaid Shake n Stack Hybridisation Oven Lab

ITEM-28157

This Hybaid Shake n Stack Hybridisation Oven was removed from a university lab where it was surplus to requirements.



The item powers on and is in a reasonable, used cosmetic condition.


The rotation works to the dial speed setting. The temperature was tested with a digital thermometer (not included).


The temperature was first set to 37˚c, when reached, the thermometer read 42.5˚c

The temperature was then set to max temp 85˚c, when reached, the thermometer read 87.9˚c


Internal dimensions - D23.5 W35 H24.5cm


Image of Uvitec UV Crosslinker  Model - CL-508.G Lab

£ 210.00 (ex. VAT) No longer available

Uvitec UV Crosslinker Model - CL-508.G Lab

ITEM-26170

This Uvitec UV Crosslinker  Model - CL-508.G was removed from a university lab where it was surplus to requirements.


The unit powers up and is in working order.


It is in reasonably good cosmetic condition but has marks from use.

Image of Caliper Life Sciences Twister II Microplate Handler Lab

£ 210.00 (ex. VAT) 1 in stock

Caliper Life Sciences Twister II Microplate Handler Lab

ITEM-08437

This unit was removed from a laboratory as surplus to requirements. We were assured the unit was in working order but have not tested it at our site. We were informed this requires an older version than the current version of Caliper Life Science software but we do not know which version.


It is the unit only - no other accessories are included.


Image of Thermo Scientific Multiskan EX Microplate Reader w/ Ascent Software  Lab

£ 200.00 (ex. VAT) 1 in stock

Thermo Scientific Multiskan EX Microplate Reader w/ Ascent Software Lab

ITEM-21213

This Thermo Scientific Multiskan EX Laboratory Microplate Reader was removed from a university lab where it had been in storage for some time.


We powered the unit on with no issues. It went through its setup to ready mode.


The unit comes with a protective cover, software CD, operation manual CD and a parallel cable.


The unit is in very good condition with almost no marks.


Image of Thermo Electron Corporation Multiskan EX Model 355 Microplate Reader Lab

£ 200.00 (ex. VAT) 1 in stock

Thermo Electron Corporation Multiskan EX Model 355 Microplate Reader Lab

ITEM-40951

This Thermo Electron Corporation Multiskan EX Model 355 Microplate Reader was removed from a university lab where it was surplus to requirements.


The unit powers up and performs a self-check test on start-up, we are unable to test it further at our facility.


It is in good cosmetic condition with marks from use.

Image of UVP Lab Products HB-1000 Hybridizer Hybridization Oven Lab

£ 200.00 (ex. VAT) 1 in stock

UVP Lab Products HB-1000 Hybridizer Hybridization Oven Lab

ITEM-38153

UVP Lab Products HB-1000 Hybridizer Hybridization Oven Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order (thermometer not included).

Image of UVP Laboratory Products HB-1000 Hybridizer Hybridization Oven Lab

£ 200.00 (ex. VAT) No longer available

UVP Laboratory Products HB-1000 Hybridizer Hybridization Oven Lab

ITEM-38152

UVP Laboratory Products HB-1000 Hybridizer Hybridization Oven Lab


This item was removed from a university where it was surplus to requirement.


The unit powers up and is in good working order (thermometer not included).


Image of Hanovia U.V.S Model 500/A & UV Lamp Lab

£ 195.00 (ex. VAT) 1 in stock

Hanovia U.V.S Model 500/A & UV Lamp Lab

ITEM-19419

This Hanovia U.V.S Model 500/A & UV Lamp was removed from a university lab where it was surplus to requirements.


The unit powers up and supplies power to the UV bulb. It seemed to be working at first but then the bulb went dim and changing the intensity no longer made it brighter. We tested it with a UV meter and only got a reading of "1" from it. it likely needs a new bulb.


It is in reasonably good cosmetic condition ut has some marks from use.



Image of Techne FlexGene FFG02FSD Benchtop Thermal Cycler Lab

£ 195.00 (ex. VAT) 1 in stock

Techne FlexGene FFG02FSD Benchtop Thermal Cycler Lab

ITEM-20281

This Techne FlexGene FFG02FSD Benchtop Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit powers up and has had basic temperature testing carried out with a digital thermometer (not included). We have not run any cycles.


When set to 37˚C the thermometer measured 37.1˚C

When set to 99˚C the thermometer measured 101.1˚C


The heated lid function works as intended.

The lid's max temperature is 110˚C


There are prior saved programs that cannot be deleted without the password.

The information menu states that the unit has run:


Unit cycles - 20178

Block cycles - 18896


It is in good cosmetic condition with some marks from use.


Image of Bio-Rad Molecular Imager FX & External Laser Lab

£ 190.00 (ex. VAT) 1 in stock

Bio-Rad Molecular Imager FX & External Laser Lab

ITEM-24516

This Bio-Rad Molecular Imager FX & External Laser was removed from a university lab where it was surplus to requirements.


Included in the system are;


1 x Molecular Imager FX


1 x External Laser


Sample Tray size - 44 x 36cm


Both units power on with both showing 'Ready' on their displays. We were unable to test the system further.


It is in reasonably good cosmetic condition with some marks from use.


Image of Helena Biosciences Cycler HBCY052 60 Well Thermal Cycler Lab

£ 185.00 (ex. VAT) 1 in stock

Helena Biosciences Cycler HBCY052 60 Well Thermal Cycler Lab

ITEM-18521

This Helena Biosciences Cycler HBCY052 60 Well Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested purely for heating purposes against a digital thermometer (not included). We have not run any cycles with it. When tested to 37 degrees it held successfully and when tested to 94 degrees it reached 81 degrees. The tube wells are 5mm in diameter & roughly 11.4mm deep/ We did not test it any further.


It is in good cosmetic condition with some light marks from use.



Image of Qiagen QIAxcel Electrophoresis Assy for Advanced RNA DNA Analysis Lab

£ 185.00 (ex. VAT) 1 in stock

Qiagen QIAxcel Electrophoresis Assy for Advanced RNA DNA Analysis Lab

ITEM-30478

This Qiagen QIAxcel was removed from a university lab where it was surplus to requirements.


The item powers on and is in good used cosmetic condition with some minor marks. We were unable to test it at our facility. There is no software included.


The lab informed us it was working but has seen heavy use.


The block holds 96 x 0.2ml tubes



Image of MJ Research PTC-100 Programmable Thermal Controller Cycler Lab

£ 180.00 (ex. VAT) 1 in stock

MJ Research PTC-100 Programmable Thermal Controller Cycler Lab

ITEM-26486

This MJ Research PTC-100 Programmable Thermal Controller Cycler was removed from a university lab where it was surplus to requirements.


The item is in reasonable cosmetic condition with scratches and marks.


The 60x well block fits 0.5ml test vials.


The item powered on without issue and the heated lid works. It was tested with a digital thermometer (not included).


When set to 37˚C the thermometer measured 37.0˚C.

When set to 100˚C the thermometer measured 101.9˚C.


It comes with an HBA-1600 hot bonnet heated lid.


Image of Bio-Rad Gel Doc 2000 Universal Hood UV Gel Imaging System Lab

£ 175.00 (ex. VAT) 1 in stock

Bio-Rad Gel Doc 2000 Universal Hood UV Gel Imaging System Lab

ITEM-25192

This Bio-Rad Gel Doc 2000 Universal Hood UV Gel Imaging System was removed from a university lab where it was surplus to requirements.


The unit powers up but only 2 of the bulbs in the Transilluminator are working. The white lights are working.


It is in good cosmetic condition with some marks from use.


Image of Medical Systems Corp PLI-100 Pico Injector Lab

£ 170.00 (ex. VAT) 1 in stock

Medical Systems Corp PLI-100 Pico Injector Lab

ITEM-30272

This Medical Systems Corp PLI-100 Pico Injector was removed from a university lab where it was surplus to requirements.


The item powers on and is in reasonably good used cosmetic condition.


It comes in a plain box. We are unsure whether it is the original packaging but the padding fits.


Unit dimensions - L42 W30 H14cm


Image of Perkin Elmer DNA Thermal Cycler Lab

£ 160.00 (ex. VAT) 1 in stock

Perkin Elmer DNA Thermal Cycler Lab

ITEM-31322

This Perkin Elmer DNA Thermal Cycler was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested at multiple temperatures (digital thermometer not included). It is in full working order.


It is in reasonably good cosmetic condition but has some marks from use.


Block Holds 48 x 0.5ml

Image of Labsystems Multiskan Multisoft 349 Benchtop Microplate Reader Lab

£ 130.00 (ex. VAT) 1 in stock

Labsystems Multiskan Multisoft 349 Benchtop Microplate Reader Lab

ITEM-18475

This Labsystems Multiskan Multisoft 349 Benchtop Microplate Reader was removed from a university lab where it was surplus to requirements.


The unit powers up and the display reads "no light". It has not been tested further.


It is in reasonably good cosmetic condition but has some marks from use.

Image of Dynatech Microplate Reader  Model - MR 5000 Lab

£ 130.00 (ex. VAT) 1 in stock

Dynatech Microplate Reader Model - MR 5000 Lab

ITEM-20727

This Dynatech Microplate Reader  Model - MR 5000 was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further. It is in reasonably good cosmetic condition with some marks from use. There is damage to the printer port.



Image of Packard SpectraCount Absorbance Microplate Reader  Model: AS10001

£ 125.00 (ex. VAT) 1 in stock

Packard SpectraCount Absorbance Microplate Reader Model: AS10001

ITEM-27750

This was removed from a university lab where it was surplus to requirements.


The item is in good cosmetic condition with some marks from use. There is a crack on the back panel on the right hinge, but it doesn't affect the hinge's ability.


The item was plugged in but made no indication it had powered on. It has no power indication LED. We were unable to test it without the software.


Image of Uvitec UVI Chemi CAS6000 Gel Documentation System Lab

£ 120.00 (ex. VAT) 1 in stock

Uvitec UVI Chemi CAS6000 Gel Documentation System Lab

ITEM-34791

Uvitec UVI Chemi CAS6000 Gel Documentation System


This was removed from a university lab where it was surplus to requirements.


The unit powers up but we were unable to test it further without a PC & Software.


It is in reasonably good cosmetic condition but has some marks from use.


1x Uvitec UVI Chemi CAS6000

S/N: MO3 4502


1x Uvitec Camera

S/N: MO3 4501


Image of Illumina BeadArray Reader PN 11182031 Lab

£ 120.00 (ex. VAT) 1 in stock

Illumina BeadArray Reader PN 11182031 Lab

ITEM-36228

Illumina BeadArray Reader PN 11182031


This was removed from a university lab where it was surplus to requirements.


The unit powers up but we were unable to test it further.


Model: BeadArray Reader

Serial#: S387

Part#: 11182031

Date: 2007-01


Image of Life Technologies Ion Torrent OneTouch ES Enrichment System Model 844-21 Lab

£ 115.00 (ex. VAT) 1 in stock

Life Technologies Ion Torrent OneTouch ES Enrichment System Model 844-21 Lab

ITEM-19352

This Life Technologies Ion Torrent OneTouch ES Enrichment System Model 844-21 was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further.


It is in good cosmetic condition but has been used previously.

Items 251 to 300 of 330

Filters

Price (£)

to

Condition