Biotechnology

£ 630.00 (ex. VAT) 1 in stock

C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab

ITEM-34874

C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. Both pump speeds (High/Low) work correctly.

Included are;

Tank

Model: DGGE-2001

Volts (DC/Hz): 250VDC

Maximum Operating Limits: 250VDC/30W/70ºC

Polyscience Model 71 Analog Immersion Recirculating Water Bath Heater Pump

Model: 71

Voltage: 240

Range

Hz/A: 50/4.30

S/N: G15327

Rev: B

£ 605.00 (ex. VAT) 1 in stock

Illumina Cluster Station REF 408 for Genome Analyser Lab

ITEM-31914

This Illumina Cluster Station was removed from a university lab where it was surplus to requirements.

The item powers on and is in a reasonably good cosmetic condition with some marks from use. There is one foot missing but the unit still stands level.

Tubes:-

7 x 50ml

2 x 15ml

9 x 1.5ml

£ 600.00 (ex. VAT) 1 in stock

Lonza Lucetta Luminometer Lab

ITEM-45564

Lonza Lucetta Luminometer

This item was removed from a university laboratory where it was surplus to requirements.

The luminometer is in good cosmetic condition and powers on. We are unable to conduct further testing at our facility.

The power supply cable is included.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

Molecular Dynamics Typhoon 8600 Variable Mode Imager Lab - Spares Repairs

ITEM-06512

Molecular Dynamics Typhoon 8600 Variable Mode Imager originated in a working Lab in a top UK University but is now surplus to requirements.

The unit does not seem to power up. The unit is in reasonable condition but shows signs of wear and age.

Sold as spares or repair.

£ 600.00 (ex. VAT) 1 in stock

Berthold Technologies Lumat LB 9507 Ultra Sensitive Tube Luminoter Lab

ITEM-44521

Berthold Technologies Lumat LB 9507 Ultra Sensitive Tube Luminoter Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

SPARES/REPAIR ITEM

£ 600.00 (ex. VAT) 1 in stock

DW Scientific Automated Spiral Plater w/ Whitley Vacuum Source (WASP) Lab Faulty

ITEM-40986

DW Scientific Whitley Automated Spiral Plater with Whitley Vacuum Source (WASP)

This system was removed from a university lab where it was surplus to requirements.

The unit powered up and read “System Error”. Therefore, it is listed as Spares or Repairs.

Includes the following:

1x DW Scientific Whitley Automatic Spiral Plater with Whitley Vacuum Source

S/N: WA03DB

1x DW Scientific Whitley Vacuum Source

S/N: NV06CM

£ 595.00 (ex. VAT) 1 in stock

Metertech Microplate Reader Model M960 Lab

ITEM-35102

This Metertech Microplate Reader Model M960 was removed from a university lab where it was surplus to requirements.

The item powers on with the plate door opening/closing and the lamp working. We were unable to test any further.

The item is in a reasonable, used cosmetic condition and comes with a manual.

NEW ITEM

£ 585.00 (ex. VAT) 1 in stock

3 x Millipore Mobius CellReady 3L Bioreactors Cat no. CR003L200 Lab

ITEM-31071

These were removed from a lab where they were surplus to requirements.

All are brand new and sealed but are past their expiry dates.

£ 580.00 (ex. VAT) 1 in stock

Turner BioSystems Modulus II Microplate Multimode Reader with Injector Lab

ITEM-30241

This Turner BioSystems Modulus II Microplate Multimode Reader was removed from a university lab where it was surplus to requirements.

Included are;

1 x Turner BioSystems Modulus II Microplate Multimode Reader

Model - 9300-011

1 x Injector System

Model - 9300-062

Fluorescence Optical Kit with:

EX 365

EX 525

EX 490

EX 625

It comes with a power supply & a pump module cable.

The item powers on and is in good, used cosmetic condition.

The absorbance module is not included.

£ 565.00 (ex. VAT) 1 in stock

Robins Scientific Hydra 96 Microdispenser System Lab

ITEM-36944

This Robins Scientific Hydra 96 Microdispenser System was removed from a university lab where it was surplus to requirements.

The unit powers up and functions. it comes with an emergency stop button and cover.

It is in reasonable cosmetic condition with minor marks.

£ 510.00 (ex. VAT) 1 in stock

Thermo Scientific Model Compact LidPark P00155 Lab

ITEM-37179

Thermo Scientific Compact LidPark P00155

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers up, we are unable to test it further at our facility.

Model: LidPark P00155

£ 505.00 (ex. VAT) 1 in stock

Hybaid Maxi 14 Hybridisation Oven Lab

ITEM-26176

Hybaid Maxi 14 Hybridisation Oven

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but may need calibrating to your equipment. It was tested with a digital thermometer (not included).

It is in good cosmetic condition with minor marks.

Internal Dimensions - D34 W34 H50cm

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Typhoon Trio+ Variable Mode Imager Spares or Repair Lab

ITEM-37335

Typhoon Trio+ Variable Mode Imager

This item was removed from a university lab where it was surplus to requirement.

It has not been tested due to exposed wiring, and is sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Perkin Elmer Piezorray Flexible Non-contact Microarraying System Spares/Repair

ITEM-45182

Perkin Elmer Piezorray Flexible Non-contact Microarraying System Spares/Repair

This system was removed from a university laboratory where it was surplus to requirements.

The Piezorray system powers up but encounters a software error indicating a problem with the device drivers or compatibility issues when connected to the PC.

The error prevents further use and testing of the system.

Therefore, it is listed as Spares/Repair.

The system comprises the following:

1 x Perkin Elmer Piezorray main unit
1 x Enclosure, seemingly custom for the Piezorray
1 x Perkin Elmer Precisely Unit
1 x Non-branded blue and white unit
1 x Cole Parmer Air Admiral Pump
1 x Elga PURELAB UHQ
1 x Cole Parmer Programmable Polystat Chiller
1 x StockerYale IMAGELITE MODEL 20 light source with Lightpipe
1 x Dell Optiplex 280 PC with Windows XP OS, Perkin Elmer Piezorray software, and National Instruments Measurement & Automation software, including keyboard, mouse, and monitor

Includes:

3 x Tecan 731070 Syringes (used)
2 x Spare temperature-controlled microplate holders
5 x ADKH501-4PK Test Record Autodrop Pipettes (new)
Various spare tubing

Note: Tables are not included in the sale.

£ 500.00 (ex. VAT) 1 in stock

Campden Model 773 Micropipette Puller Lab

ITEM-37802

This Campden Model 773 Micropipette Puller was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition.

We are unable to test this item further at our facility.

£ 500.00 (ex. VAT) 1 in stock

Binder BFED 53 Hybridisation Oven Rotisserie Shaker Lab

ITEM-42197

Binder BFED 53 Hybridisation Oven Rotisserie Shaker

This item was removed from a university lab where it was surplus to requirements.

The oven powers on and is in good cosmetic condition.

It features a speed-adjustable shaking platform and a rotisserie bottle holder with 12 bottle slots. The glass inner door is intact, and all mechanical functions such as the rotisserie and shaking platform are operational.

The unit is in good working order (thermometer not included).

Specifications:

Maximum oven temperature: 100˚C
Rotisserie bottle holder: 12 places
Glass inner door

Model: BFED 53

Serial No.: 01-27712

£ 500.00 (ex. VAT) 1 in stock

Bio-Rad UltraMark Microplate Imaging System

ITEM-45008

Bio-Rad UltraMark Microplate Imaging System

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in fair cosmetic condition.

No controller or additional equipment included to adjust the temperature.

Model: Ultramark.

£ 500.00 (ex. VAT) 1 in stock

Agilent Technologies DNA MicroArray Scanner G2539A Lab

ITEM-44395

Agilent Technologies DNA MicroArray Scanner Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This item also includes the following:

1 x Box of Qty. 5 Slide Holders
2 x G2539A Hybridisation Chamber

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Tecan Infinite F50 Microplate Reader Spares/Repair Lab

ITEM-46349

Tecan Infinite F50 Microplate Reader

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition but is listed for spares or repair.

The unit powers up without issue; however, during setup with software, it displays an ERR028 and fails initialization. This issue is likely due to the filter section having been removed. Please note, it does not come with a PC setup, software, or a PSU.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eppendorf Realplex 4 MasterCycler Epgradient S Real Time Cycler 96-Well Lab

ITEM-31867

Eppendorf Realplex 4 MasterCycler Epgradient S Real Time Cycler 96-Well

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, however it does not include the required controller. We made several attempts to connect it to the software from another unit (not included), but it would not communicate Therefore, it is listed as Spares/Repair.

Includes an Eppendorf USB drive with pre-installed software and a digital user manual.

£ 500.00 (ex. VAT) 1 in stock

Thermo Scientific Compact LidPark P00155 Lab

ITEM-37180

Thermo Scientific Compact LidPark P00155

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers up, we are unable to test it further at our facility.

Model: LidPark P00155

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Geneflow Sensoquest LabCycler Gradient Laboratory Thermal Cycler Lab Faulty

ITEM-41560

Geneflow Sensoquest LabCycler Gradient Laboratory Thermal Cycler Lab

This item was removed from a university where it was surplus to requirement.

The unit did not power up in testing. it is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs

ITEM-41561

Applied Biosystems Veriti 96 Well Thermal Cycler Lab Spares/Repairs

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Opentrons Pipetting Robot OT2 Lab Spares or Repairs

ITEM-41244

Opentrons Robot OT2

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition.

The system has been stripped for parts and is sold for spares/repairs

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Protec Eco Max X-Ray Film Processor Lab Spares/Repairs

ITEM-42060

Protec Eco Max X-Ray Film Processor

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in fair condition with some wear. There are some spots of rust, and the baseplate is missing. Therefore, resulting in a visual PAT fail.

It is listed as Spares/Repair.

Specifications:

Model: Eco Max
Serial No.: 118630-1309-0841
REF: 1186-3-4000

£ 480.00 (ex. VAT) 1 in stock

Robins Scientific Hydra 96 Microdispenser Lab

ITEM-35101

This Robins Scientific Hydra 96 Microdispenser was removed from a university lab where it was surplus to requirements.

The unit powers up and the up/down function has been tested. It is in good cosmetic condition with marks from use.

£ 425.00 (ex. VAT) 1 in stock

Dynatech MR 250 Microplate Reader Lab

ITEM-35104

This Dynatech MR 250 Microplate Reader was removed from a university lab where it was surplus to requirements.

The item powers on with the lamp working, and it printed out some info after the initial warm-up sequence.

It is in reasonably good cosmetic condition but has some marks from use.

£ 400.00 (ex. VAT) 1 in stock

Axon Instruments GenePix 4000A Microarray Scanner Lab

ITEM-23358

This Axon Instruments GenePix 4000A Microarray Scanner was removed from a university lab where it was surplus to requirements.

We were unable to test the item as it requires a specific power supply which we don't have.

It is in a reasonable used cosmetic condition with marks from use.

£ 400.00 (ex. VAT) 1 in stock

Eppendorf Mastercycler Gradient Thermal Cycler PCR Lab

ITEM-46711

Eppendorf Mastercycler Gradient Thermal Cycler PCR Lab

This item was removed from a university laboratory where it was surplus to requirements.

It is in reasonably good cosmetic condition, though there is some wear on the display screen. This does not affect its functionality.

The item successfully powered on and passed a temperature test.

£ 400.00 (ex. VAT) 1 in stock

Eppendorf Mastercycler Gradient Thermal Cycler PCR Lab

ITEM-46410

Eppendorf Mastercycler Gradient Thermal Cycler PCR Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

£ 385.00 (ex. VAT) 1 in stock

Techne Progene Thermal Cycler Model FPR0GO5D Lab

ITEM-35942

Techne Progene Thermal Cycler Model FPR0GO5D

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer not included).

It is in good cosmetic condition with minor marks.

£ 375.00 (ex. VAT) 1 in stock

Bio-Rad Universal Hood II Gel Doc Imaging System (No Camera) Lab

ITEM-26890

This Bio-Rad Universal Hood II Gel Doc Imaging System was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. There is no camera included.

It is in good cosmetic condition with some minor marks from use.

£ 370.00 (ex. VAT) 1 in stock

Labsystems Multiskan MS Type 352 Microplate Reader Lab

ITEM-17198

This Labsystems Multiskan MS Type 352 Microplate Reader was removed from a university lab where it was surplus to requirements.

the unit is in good cosmetic condition but does have some marks from use.

The unit powers up and goes through calibration on startup. It has not been tested further.

£ 350.00 (ex. VAT) 1 in stock

Bio-Rad Gel Doc Universal Hood II Lab

ITEM-44765

Bio Rad Gel Doc Universal Hood II

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Included Components:

Transilluminator
Camera

£ 350.00 (ex. VAT) 1 in stock

Bio-Rad UView Mini Transilluminator Lab

ITEM-39239

Bio-Rad UView Mini Transilluminator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

The original PSU is included.

£ 350.00 (ex. VAT) 1 in stock

Qiagen Tissuelyser 5mm Bead Dispenser 96 Well lab

ITEM-37229

Qiagen Tissuelyser 5mm Bead Dispenser 96 Well lab

This item was removed from a university lab where it was surplus to requirement.

It is in excellent condition with its original packaging.

It also includes a Dispensing Funnel.

£ 350.00 (ex. VAT) 1 in stock

Genetix Qpix2 Benchtop Colony Picker with Software & Accessories Lab

ITEM-27505

This Genetix Qpix2 Benchtop Colony Picker was removed from a university lab where it was surplus to requirements.

The lab said it was fully working prior to removal but unfortunately it seems like the dongle for the software has been misplaced.

Included are;

1 x Genetix Qpix2 Benchtop Colony Picker

Inside dims - D67 W100 H35cm

We powered up the unit but were unable to test if further.

Inside side panel of bottom unit - Jun-Air Model 400 Oil-Less Compressor - It powers on and works

1 x PC, Monitor, Keyboard & Mouse - All power on and work, the pc has the software listed below.

The item is in a reasonable, used cosmetic condition.

Manuals/Software:-

QPix2 User Manual

Replicating Application Guide

Gridding Application Guide

Picking Application Guide

QSoft Data Tracking Application Guide

QFill2 User Manual

QScan User Guide

aQuire User Guide

Discs:-

QSoft xp Build 6400.16

QSoft xp Build 6100.11

QSoft xp Build 6300.01

QScan beta 1

QP2231 (Floppy Disk)

Boxed Accessories/Consumables include:-

Metrologic Scanner

6 x Master PL-L 840/4P Light bulbs

Lots of various Slides inc. brands Genetix & EZ-Rays

Genetix Micro Spotting Pins

Genetix Microarray Spotting Solution

Various Packs of Glass Beads

2 x Plastibrand Tip-Racks

Various other spare bits/parts

16 x New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)

8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)

1 x Box of ISS 10ml Specimen Collection Tubes (QTY 500)

£ 350.00 (ex. VAT) 1 in stock

Genetix QArray Microarray Printer with Jun-Air 400 Compressor OF302-10S Lab

ITEM-27506

This Genetix QArray Microarray Printer was removed from a university lab where it was surplus to requirements.

The lab said it was working prior to removal.

Included in the system are;

1 x Genetix QArray

Inside dims - D67 W100 H35cm

The unit powers on but we were unable to test it further at our facility.

Inside side panel of bottom unit -

1 x Jun-Air Model 400 Oil-Less Compressor

It powers on, works, and comes with a manual.

1 x Separate Jun-Air Unit:-

Model - OF302-10S

It powers on

Computer parts include:-

PC, Monitor, Keyboard, Mouse & Metrologic Scanner

The PC has QSoft IO Manager, QSoft XP ReStackers & QSoft Microarraying programs/software.

The item is in a reasonable, used cosmetic condition.

Manuals:-

Genetix Microarray User Training Guide

MicroArraying Application Guide

QArray User Guide

Array-Pro Analyzer Users Guide

Boxed Accessories/Consumables include:

18 x Mostly New & Sealed Boxes of VWR Micro Centrifuge Tubes (2ml) 500/pack (10 Packs in box)

8 x Boxes of ISS 2ml Microtubes with Separate White Caps Gamma Iradiated (4 x Ref MT0075IR)

Stand Apron, Mask Stand and Mount for Metrologic Scanner

Computer Cable

£ 345.00 (ex. VAT) 1 in stock

Bio-Rad Universal Hood II with Transilluminator Lab

ITEM-31283

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the lights are all in working order.

There is no camera.

Comes with:-

Box of 6 Bio-Rad ChemiDoc XRS Lamps

Hardware Instruction Manual

£ 340.00 (ex. VAT) 1 in stock

Techne Flexigene FFG02FSD Benchtop Thermal Cycler PCR Lab

ITEM-14889

This Techne Flexigene FFG02FSD Bench-Top Thermal Cycler was removed from a laboratory where it was surplus to requirements.

The unit is in good condition but is showing signs of wear. It powers on, and a basic program was run to test the lid and the sample tray heater, which is working. It has not been tested further.

£ 315.00 (ex. VAT) 1 in stock

Molecular Devices Skatron Embla Microplate Washer Lab

ITEM-30469

This Molecular Devices Skatron Embla Microplate Washer was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with some marks from use.

It powers up but we were unable to test it further at our facility.

£ 305.00 (ex. VAT) 1 in stock

UVP BioImaging Systems AutoChemi System with DarkRoom, Camera & Light Panel Lab

ITEM-30454

This UVP BioImaging Systems AutoChemi System was removed from a university lab where it was surplus to requirements.

Included are;

UVP BioImaging Systems Autochemi System

PN - 97-0150-02

Powers on

Auto Chemi Darkroom

PN - 95-0351-02

Gepe G-2004 Light Panel

12" x 8" Picture

Powered on when tested with our 12vdc power supply (not included) but it didn't power on via the main unit

UVP Auto Zoom Lens

Computar TV Zoom Lens

M6Z1212MP3 12.5-75mm 1:1.2

Hammatsu Photonics Camera

Model - C8484-51-03G

THe unit does not power up

Software:-

UVP Labworks Image Acquisition & Analysis Software Ver. 4.5

Labworks Capture Support CD Ver. 4.5

Manuals:-

User Manual

Labworks 4.5 Reference Guide

Labworks 4.5 Auto-Pro Reference

Labworks Start up Guide/Image Database Guide/Report Generator

AC1 Auto Darkroom Operating Instructions

The item in in a good, used cosmetic condition but is unable to be tested any further than powering on at this point.

Please note:

The software requires a USB dongle which is not included.

The software will only run in demo mode without this!

£ 300.00 (ex. VAT) 1 in stock

UVP XX-15 UV Lamp Fixture Lab

ITEM-39126

This UVP XX-15 UV Lamp Fixture was removed from a university lab where it was surplus to requirements.

It powers up and is in reasonably good cosmetic condition.

UV bulb included.

£ 300.00 (ex. VAT) 1 in stock

Bio-Rad Universal Hood II Imaging System Lab

ITEM-24306

This Bio-Rad Universal Hood II Imaging System was removed from a university lab where it was surplus to requirements.

The unit powers up and is in working order, but the firewire camera has not been tested as it requires a PC with a firewire port.

Included are;

1 x Bio-Rad Universal Hood II

Powers on with both white & UV lights working.

1 x Digital camera with motorised lens and connection leads.

The power supply unit for the camera does work and the camera powers on. The casing has a tape repair.

Overall it is in good cosmetic condition with minor marks from use.

£ 300.00 (ex. VAT) 1 in stock

Hybaid Maxi 14 Rotisserie Shaking Hybridisation Oven Lab

ITEM-37801

Hybaid Maxi 14 Rotisserie Shaking Hybridisation Oven

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Shaking platform 33 x 33cm

Internal dimensions 35 x 32 x 51cm

Rotisserie 10 x 35mm bottles

£ 300.00 (ex. VAT) 1 in stock

Hybaid Maxi 14 Rotisserie Hybridisation Oven Lab

ITEM-39125

Hybaid Maxi 14 Rotisserie Hybridisation Oven

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order when heated to 36ºc, when set to 100ºc item would not climb beyond 60ºc. The shaking plate and Rotisserie shaker are both in good working order.

It is in reasonably good cosmetic condition with surface damage present.

£ 300.00 (ex. VAT) 1 in stock

Eppendorf Mastercycler Thermal Cycler PCR Lab

ITEM-47046

Eppendorf Mastercycler Gradient Thermal Cycler PCR Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

£ 275.00 (ex. VAT) 1 in stock

KOPF Model 730 Needle/Pipette Puller Lab

ITEM-31910

This KOPF Model 730 Needle/Pipette Puller was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further.

It is in good cosmetic condition with marks from use.

£ 265.00 (ex. VAT) 1 in stock

Bio-Rad Dyad Disciple Peltier Thermal Cycler PTC0221 2-48 Well & 96 Well Block

ITEM-36926

Bio-Rad Dyad Disciple Peltier Thermal Cycler PTC0221 2-48 Well & 96 Well Block

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it without the control unit.

Bio-Rad Dyad Disciple Peltier Thermal Cycler

Model - PTC0221

SN - DY005562

2-48 Well Alpha Unit Block Assembly

SN - AL037212

96 Well Alpha Unit Block Assembly (ALP2296)

SN - AL110470

Holds 0.2ml vials

£ 250.00 (ex. VAT) 1 in stock

Techne Hybridiser HB-1D Hybridisation Oven Lab

ITEM-39141

This Techne Hybridiser HB-1D Hybridisation Oven was removed from a university lab where it was surplus to requirements.

The item powers on and is in reasonably good cosmetic condition.

The temperature was tested with a digital thermometer (not included).

Biotechnology

Filters