Items 1 to 12 of 12

Image of item

£ 1,875.00 (ex. VAT) 1 in stock

Beckman Coulter Model J-6M Induction Drive Ultracentrifuge Bucket Rotor Lab

ITEM-14433

Beckman Coulter Model J-6M Induction Drive Centrifuge.


This item was removed from a lab as surplus to requirements.


We were assured by the lab manager the unit was in good working order prior to disconnection.


At our site, we have not wired in the unit to conduct any testing, but anticipate the unit being in good working order. However, the unit must be safety inspected on receipt by a competent engineer to ensure unit is properly balanced and serviced appropriately.


Unit is quite old so has some wear and tear.


Rotor lit has mottled scratches and dents/marks on it, but otherwise seems fine.


Rotor is SER E 4200rpm max 4-90 TY-JS 4 2

Buckets are 100mm diameter.


Drum is 570mm wide


Please see photos for further details.


Image of item

£ 727.72 (ex. VAT) 1 in stock

Beckman Coulter Optima XL-80K Ultracentrifuge 80000rpm Lab - Spares / Repairs

ITEM-16152

This Beckman Coulter Optima XL-80K Ultracentrifuge 80000rpm was removed from a university lab where it was surplus to requirements.


The unit powered on but the monitor wouldn't come on, we can hear the fan running but we tried all the buttons and got no result. We are fairly confident that there is power to the unit though.


The power on/off buttons works and we managed to open the door manually by removing the front cover and releasing pressure from the vacuum.


Cosmetically the item is in reasonably good condition but has been previously well used.


Because of the monitor issue - the unit is sold as spares / repairs.

Image of item

£ 1,125.00 (ex. VAT) 1 in stock

Beckman Coulter Optima XL-90 Ultra Centrifuge Lab

ITEM-14879

This Beckman Coulter Optima XL-90 Ultra Centrifuge was removed from a laboratory where it was surplus to requirements.


We were unable to power the unit on, but the usage book shows it being used as recently as March 2020 prior to its removal. The lab manager informed us it was working when last used.


It has been well used, the foam in the lower section has begun to deteriorate, the screen housing doesn't stay clipped on and the rotor compartment is marked but it is in reasonable condition.


There is no rotor fitted but it comes with foot rests and a rotor book.


Fitted with a 30amp power supply.


because of the nature of the equipment it must be fully tested, calibrated and balanced prior to use.


Image of item

£ 394.88 (ex. VAT) 1 in stock

MSE Chilspin Freestanding Cooling Centrifuge Lap Equipment

ITEM-06119

MSE Chilspin Freestanding Cooling Centrifuge


This item came to us as part of a Lab Clear Out from a top UK University.


Unit powers on and has been tested to 4000rpm. Temperamental brake and lid release due to age of unit and being sat redundant for extended period of time.


4 x 269gram centrifuge buckets included as shown in pictures.


Unit is freestanding on casters which are worn but still functional.

Image of item

£ 2,565.00 (ex. VAT) 1 in stock

Sorvall RC-3C High Capacity Refrigerated Centrifuge Lab 6000RPM

ITEM-13923

This unit was removed from a lab as surplus to requirements.


The unit requires a 25Amp, 240V supply. Unfortunately we do not have one at our site so we have not been able to test the unit. However we were informed it was working, and came to us as part of an upgrade where the facility had ordered 11 new centrifuges.


If you proceed to order, please ensure that you get it tested / inspected ideally by a professional engineer on arrival for balance.


If there are any problems, we will happily offer you a full refund in exchange for return of the goods (within UK we will cover return pallet shipping).


However, we cannot reimburse installation costs.


Unit is in good physical condition.

Image of item

£ 2,025.00 (ex. VAT) 1 in stock

Sorvall RC-5B Refrigrated Superspeed Centrifuge Ultracentrifuge Lab 21000 rpm

ITEM-13956

This unit was removed from a lab as surplus to requirements.


The unit requires a 30Amp, 240V supply. Unfortunately we do not have one at our site so we have not been able to test the unit. However we were informed it was working, and came to us as part of an upgrade where the facility had ordered 11 new centrifuges.


If you proceed to order, please ensure that you get it tested / inspected ideally by a profesional engineer on arrival for balance.


If there are any problems, we will happily offer you a full refund in exchange for return of the goods (within UK we will cover return pallet shipping).


However, we cannot reimburse installation costs.


Unit is in good physical condition.


Supposedly the unit is compatible with the following rotors - but there is no rotor included.


<img src="/files/IhooGKI.png"/>

Image of item

£ 375.00 (ex. VAT) 1 in stock

Sorvall RC-5C Super Speed Centrifuge Lab 20000rpm Faulty Spares / Repairs

ITEM-13927

Sorvall RC-5C Super Speed Centrifuge Lab 20000rpm Faulty.


This unit was removed from a lab as it developed a fault. The engineer reported that it requires a new motor - we have not tested the unit ourselves.


The unit requires a 30Amp, 240V supply.


Unit does not come with any rotor.


Unit is sold as spares / repairs.

Image of item

£ 2,437.50 (ex. VAT) 1 in stock

Sorvall RC-5C+ 21,000rpm Refrigerated SuperSpeed Lab Centrifuge Ultracentrifuge

ITEM-15379

This Sorvall RC5C+ Centrifuge was removed from a university where it was surplus to requirements.


The unit has not been tested by us but is in reasonable condition. There is a crack on the lid and there are a few dents on the main unit. The fpm/rcf switch is broken. The internals of the machine however are in good condition.


The lab assured us the units were working and annually serviced until five years ago - but have not been used since then so some servicing is likely to be required.


Manufactured 2002.

Max rpm 21,000.

Single Phase.

5kw.

Image of item

£ 1,118.84 (ex. VAT) 1 in stock

Sorvall RC5C Refrigerated SuperSpeed Lab Centrifuge DuPont Ultracentrifuge

ITEM-15378

This Sorvall RC5C Centrifuge was removed from a laboratory where it was surplus to requirements.


The lab assured us the units were working and annually serviced until five years ago - but have not been used since then so some servicing is likely to be required.


The unit has not been tested and is in reasonably poor cosmetic condition. One side is quite dented and screws are missing from the panels.


It will need inspecting for safety before it is used again.

Image of item

£ 4,387.50 (ex. VAT) 1 in stock

Sorvall RC6 Plus Super Speed Refrigerated Lab Centrifuge 22000RPM

ITEM-13922

This unit was removed from a lab as surplus to requirements.


The unit requires a 30Amp, 240V supply. Unfortunately we do not have this supply at our site so we have not been able to test the unit. However we were informed it was working, and came to us as part of an upgrade where the facility had ordered 11 new centrifuges.


If you proceed to order, please ensure that you get it tested / inspected ideally by a professional engineer on arrival for balance.


If there are any problems, we will happily offer you a full refund in exchange for return of the goods (within UK we will cover return pallet shipping).


However, we cannot reimburse installation costs.


Unit is a bit dirty and cosmetically 'used' condition - there is also some cracked / smals breaks on the plastic lid - but overall still in good condition.


Unit does not come with any rotor.

Image of item

£ 269.83 (ex. VAT) 1 in stock

Sorvall Ultra Pro 80 Refrigerated Ultracentrifuge 80,000rpm Spares / Repair Lab

ITEM-15377

This Sorvall Ultra Pro 80 Centrifuge was removed from a university where it was surplus to requirements.


The lab assured us the units were working and annually serviced until five years ago - but have not been used since then so some servicing is likely to be required. This particular unit was low on drive oil apparently.


However in shipping to us from the lab via a pallet network it appears to have obtained some damaged.


The main control panel is completely smashed and the circuit board will need replacing.


The manuals and service manuals are included.


Sold as Spares/Repairs.



Image of item

£ 2,733.75 (ex. VAT) 1 in stock

Thermo Scientific Sorvall LYNX 4000 Superspeed Centrifuge - Lab

ITEM-13443

This unit was removed from a lab during a clearout.


Unit looks in great condition, but bottom of drum was full of carbon fiber dust and there is a gouge in lower part of the lid and there was also a piece of metal inside the rotor as shown in photos. It is possible that there has been some kind of incident / damage inside the centrifuge bed - we are not sure.


We have not tested the unit as we do not have the appropriate power supply.


There is no rotor included.

Items 1 to 12 of 12