Engineering

£ 600.00 (ex. VAT) 1 in stock

TesaTronic TTD 30 Tesa-13 Comparator Unit

ITEM-51495

TesaTronic TTD 30 Tesa-13 Comparator Unit

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

Bambi PT24 Oil Free Compressor

ITEM-47398

Bambi PT24 Oil Free Compressor

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on.

The lab confirmed it was in good working order prior to removal.

£ 600.00 (ex. VAT) 1 in stock

STS Drum Lifting Trolley 60kg

ITEM-46226

STS Drum Lifting Trolley

This item was removed from a facility where it was surplus to requirements.

The STS Drum Lifting Trolley is in good cosmetic condition. It has not been powered on, as operation requires a compressor.

Therefore, it is untested.

£ 600.00 (ex. VAT) 1 in stock

LiftSafe 60KG Electric Work Positioner

ITEM-46223

LiftSafe 60KG Electric Work Positioner

This item was removed from a facility where it was surplus to requirements.

It is in fairly poor cosmetic condition but in good working order.

£ 600.00 (ex. VAT) 1 in stock

Meritus Spot Welder Type PS 10A

ITEM-55359

Meritus Spot Welder Type PS 10A

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further at our facility.

£ 600.00 (ex. VAT) 1 in stock

Tektronix TDS 520C Two Channel Digitizing Oscilloscope with InstaVu Acquisition

ITEM-53851

Tektronix TDS 520C Two Channel Digitizing Oscilloscope with InstaVu Acquisition

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: It is missing a foot.

£ 600.00 (ex. VAT) 1 in stock

Agilent 6654A System DC Power Supply

ITEM-53874

Agilent 6654A System DC Power Supply

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 550.00 (ex. VAT) 1 in stock

P&J Dust Extraction LTD Dust Extraction Unit

ITEM-54312

P&J Dust Extraction LTD Dust Extraction Unit

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 27/11/2023

£ 520.00 (ex. VAT) 1 in stock

ATI Portasens III Gas Leak Detector Model No. D16 with H2O2 Sensor Lab

ITEM-38096

ATI Portasens III Gas Leak Detector Model No. D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered up, we are unable to test it further at our facility.

Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Tenenergy 10,000 mAh NiMH rechargeable battery

1 x calibration t-fitting

3 x filters

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 510.00 (ex. VAT) 1 in stock

ATI Portasens III Gas Leak Detector Kit Model D16 w/ H2O2 Sensor Lab

ITEM-38095

ATI Portasens III Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Sampling Wand for localised detection

2 x Tenenergy 10,000 mAh NiMH rechargeable batteries

1 x Intellicharger Newi2 charger with power cable

1 x Dwyger Instuments Minimaster flow meter

1 x calibration t-fitting

1 x filters

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 500.00 (ex. VAT) 1 in stock

4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans

ITEM-37658

4 X ZIEHL-ABEGG Type - EWRG 210 LB/4 Industrial Blower Fans

These were removed from a university lab where they were surplus to requirements.

All 4 Units power on and are powerful they are in Good Condition with Minimal Wear and just a few minor scratches here and there

Model - EWRG 210 LB/4

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Axminster AP6300HD3 Bandsaw (Model 700352) 3 Phase

ITEM-48751

Axminster AP6300HD3 Bandsaw (Model 700352) – 3 Phase – Spares/Repair

This item was removed from a facility where it was surplus to requirements.

The unit is in good used cosmetic condition with typical signs of workshop use. The previous owner reported the machine as being for parts, and as such it has not been wired for power.

There are several cut cables and missing switch keys, preventing electrical testing. In addition, the saw appears to be missing parts from the band mechanism, although the exact missing components are unknown.

The machine is also supplied without the table.

Due to the issues described above and the inability to test the unit, it is being sold as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Struers DP-U2 Grinding & Polishing Machine

ITEM-53165

Struers DP-U2 Grinding & Polishing Machine

This item was removed from a facility where it was surplus to requirement.

The unit could not be powered on as it blew two fuses during testing.

Due to this fault, the unit is being sold for spares or repair.

Accessories included:

1x 1mm Alumina Disc
7x Unknown Discs
1x PAM-FORCE Switch
1x 110/220V 50Hz Motor

£ 500.00 (ex. VAT) 1 in stock

Jun-Air Model 3 Air Compressor

ITEM-50039

Jun-Air Model 3 Air Compressor Lab

This item was removed from a university laboratory where it was surplus to requirement.

The unit is in good cosmetic condition and powers on; however, we are unable to test it further at our facility.

Both pressure gauges function as they should.

A service is recommended prior to use.

£ 500.00 (ex. VAT) 1 in stock

Polyva SLP-01 Lab-Scale Water-Soluble Pods Sample Making Machine 2022

ITEM-51159

Polyva SLP-01 Lab-Scale Water-Soluble Pods Sample Making Machine

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in good working order prior to removal.

Includes;

3 x rolls of PV0H film
User Guide
Various Accessories

£ 500.00 (ex. VAT) 1 in stock

Rockwell Hardness Tester 3 JR PG

ITEM-51037

Rockwell Hardness Tester 3 JR PG

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 500.00 (ex. VAT) 1 in stock

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

ITEM-50643

Cleghorn Waring Pumps CEKM70/3 Centrifugal Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Zimm Solar ZSA-62 Electromechanical Actuator

ITEM-48683

Zimm Solar ZSA-62 Electromechanical Actuator Spares/Repair

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, unable to test due to the power supply not being included.

Therefore, it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Eiger Torrance LTD M250 VSF TFV 'Mini" Motormill 250 Bead Mill

ITEM-49980

Eiger Torrance LTD M250 VSF TFV 'Mini" Motormill 250 Bead Mill

This item was removed from a facility where it was surplus to requirement.

It does not power on and is therefore listed as Spares/Repair.

£ 500.00 (ex. VAT) 1 in stock

JM BioConnect 1200L Container - Dual Mixing Tank (2018) Lab

ITEM-55401

JM BioConnect 1200L Container - Dual Mixing Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition with no visible damage.

£ 500.00 (ex. VAT) 1 in stock

Magnetron Sputter Banking Plate 10 inch

ITEM-47782

Magnetron Sputter Banking Plate 10 Inch

This item was removed from a facility where it was surplus to requirements.

The plate features both rubber O-rings, which are in good condition.

£ 500.00 (ex. VAT) 1 in stock

ATI Portasens III Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

ITEM-38093

ATI Portasens III Gas Leak Detector Kit Model D16 with H2O2 Sensor Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The gas leak detection kit contains the following items:

1 x main D16 detection unit

1 x ATI H2O2 sensor

1 x H10 Sensor Keeper 00-0981

1 x Sampling Wand for localised detection

2 x Tenenergy 10,000 mAh NiMH rechargeable batteries

1 x Intellicharger Newi2 charger with power cable

1 x Dwyger Instuments Minimaster flow meter

1 x 1/4" straight connector

1 x USB cable

1 x hard carry case

£ 500.00 (ex. VAT) 1 in stock

Spinnaker 1161 Laser with Water Cooling System

ITEM-41129

Spectra-physics cooling pump

Model: 1461-2

S/N: 042

Powers on, unable to test further.

Spectra Physics Spinnaker 1261:

Model:1261

S/N: 0019

The necessary cable is missing, so it couldn't be turned on.

Spectra Physics Spinnaker 1161 Laser:

Model: 1161-01

S/N: 1020

Manufactured:1992

The necessary cable is missing, so it couldn't be turned on.

£ 500.00 (ex. VAT) 1 in stock

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller Lab

ITEM-35544

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller

This was removed from a university lab where it was surplus to requirements.

Everything powers up but has not been tested further.

The PC contains quite a lot of software.

The programs that are relevant to the system are:

MicroWriter ML Version 2.11.11.0.

Thorlabs apt configuration utility v2.2.5389 14611.

MicroWriter ML will not start up properly as the hardware is not connected. This is not a fault, we just don't have the rest of the system

The Newport Motion Controller/Driver Model XPS control unit is for a table that the microwriter would sit on.

£ 500.00 (ex. VAT) 1 in stock

JP Pumps Positive Displacement Pump

ITEM-50645

JP Pumps Positive Displacement Pump

This item was removed from a facility where it was surplus to requirement.

The unit is in good working order.

A 5-pin 32A plug was temporarily fitted for testing purposes, and the pump powered on successfully.

The plug has since been removed, as the unit is intended to be hardwired.

Please note:The pump can also be configured to operate from a 4-pin supply.

£ 500.00 (ex. VAT) 1 in stock

TPA Model 7000 Geotherm Multi-channel Temperature Measurement System

ITEM-55908

TPA Model 7000 Geotherm Multi-channel Temperature Measurement System

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

£ 500.00 (ex. VAT) 1 in stock

AGS Diamond Blade Composite Table Saw

ITEM-55734

AGS Diamond Blade Composite Table Saw

This item was removed from a facility where it was surplus to requirements.

The previous owner advised that it was in full working order prior to removal; however, we have been unable to test it at our facility.

The saw is in used condition, with extensive rust/corrosion to the blade guard.

£ 500.00 (ex. VAT) 1 in stock

Wykeham Farrance T 56 B Electromechanical Motorised Load Frame

ITEM-55895

Wykeham Farrance T 56 B Electromechanical Motorised Load Frame

This system was removed from a facility where it was surplus to requirement.

The previous owner stated it was in working order prior to removal.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Wykeham Farrance Engineering LTD 25300 Shearbox

ITEM-55884

Wykeham Farrance Engineering LTD 25300 Shearbox

This item was removed from a facility where it was surplus to requirements.

The unit powers on. However, the previous owner stated that the item is faulty. The specific fault was not provided.

Due to the reported fault and limited testing, no further testing has been carried out and the item is being sold as spares or repairs.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Thermo French Pressure Cell Press Model FA-078AE

ITEM-42977

Thermo French Pressure Cell Press : FA-078AE

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in fair condition with signs of cosmetic wear. The top mount is slightly bent out of shape, and there are visible run marks on the top of the unit. No further functional testing has been conducted.

Please note: The piston for the loading cell is not included, therefore, it is listed as Spares/Repair.

Includes:

Thermo French Pressure Cell Press (Model: FA-078AE | Serial No.: FA078AE0206)
French Pressure Cell (Cat No.: FA-072 | Serial No.: 2CKA204001)

£ 500.00 (ex. VAT) 1 in stock

Gravograph Engraver with Letters/Accessories

ITEM-54960

Gravograph Engraver with Letters/Accessories

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

Includes large letter, small letters and numbers.

£ 500.00 (ex. VAT) 1 in stock

Hudswell Sherpa Model 300 Manual Hydraulic Lifter Stacker

ITEM-54790

Hudswell Sherpa Model 300 Manual Hydraulic Lifter

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 500.00 (ex. VAT) 1 in stock

HanseLifter Manual Stacker Model SDJ1516-01

ITEM-54791

HanseLifter Manual Stacker Model SDJ1516-01

This item was removed from a facility where it was surplus to requirements.

It is in good working order.

£ 500.00 (ex. VAT) 1 in stock

Hobart Floor Standing Mixer Model SE 601

ITEM-54798

Hobart Floor Standing Mixer Model SE 601

This item was removed from a facility where it was surplus to requirements.

It is in good working order.

This is no longer suitable for food purposes – it was used for mixing aggregate.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Avery Denison 7225 Testing Machine 2000KN

ITEM-54763

Avery Denison 7225 Testing Machine 2000KN Spares/Repair

This item was removed from a facility where it was surplus to requirement.

The previous owner stated it is not in working order.

It is therefore listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 500.00 (ex. VAT) 1 in stock

Hewlett Packard 8992A Digital Video Power Analyzer

ITEM-53865

Hewlett Packard 8992A Digital Video Power Analyzer

This item was removed from a facility where it was surplus to requirement.

The unit powers on, however, an error message is displayed during start-up instructing the user to press a front panel button to clear the fault or consult the manual.

Attempts to clear the error by pressing and holding the front panel buttons were unsuccessful.

Due to this fault, the unit could not be fully tested and is therefore being sold for spares or repair.

£ 450.00 (ex. VAT) 1 in stock

P&J Dust Extraction LTD Dust Extraction Unit

ITEM-54315

P&J Dust Extraction LTD Dust Extraction Unit

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 04/24

Please note: There is no plug fitted as this unit was originally hardwired.

£ 450.00 (ex. VAT) 1 in stock

Absolute OF-B90-25 Oil Free Compressor Lab

ITEM-49551

Absolute - OF-B90-25 Oil Free Compressor Lab

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and in good working order. The unit was purchased new in June 2022 and was serviced annually by Speck & Burke until decommissioning in 2023.

Model: OF-590 25 230 50/60

Serial No.: 1132598

This item is sold on behalf of a client and falls outside our normal terms and conditions. It is non-returnable and non-refundable.

£ 450.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate 7.5 inch

ITEM-47785

Magnetron Sputter Blanking Plate 7.5 inch

This item was removed from a facility where it was surplus to requirements.

The plate is in good condition with minimal wear. Its rubber O-ring is intact and in good condition.

£ 450.00 (ex. VAT) 1 in stock

Turner Machine Tools Ltd. TT14MD Grinder

ITEM-54956

Turner Machine Tools Ltd. TT14MD Grinder

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 450.00 (ex. VAT) 1 in stock

Advanced Handling Portable Crane Model - H500 Max Capacity 1000kg

ITEM-51014

Advanced Handling Portable Crane Model - H500 Max Capacity 1000kg

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 09/22

£ 450.00 (ex. VAT) 1 in stock

Jun-Air 3-4 Air Compressor

ITEM-55465

Jun-Air 3-4 Air Compressor

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 400.00 (ex. VAT) 1 in stock

Becker DT4.8 Oil Free Rotary Vane Compressor

ITEM-54196

Becker DT4.8 Oil Free Rotary Vane Compressor

This item was removed from a facility where it was surplus to requirement.

It powers on with no fault noted.

£ 400.00 (ex. VAT) 1 in stock

Lowara ITT Industries CEA 120/5-V Centrifugal Pump

ITEM-46783

Lowara ITT Industries CEA 120/5-V Centrifugal Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in working order.

Includes;

Power controller - MEM Model 331VSEL

£ 400.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate 7 inch

ITEM-47783

Magnetron Sputter Blanking Plate 7 Inch

This item was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition, though both O-rings are missing, one appears to have been rubber and the other copper.

£ 400.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate 7 inch

ITEM-47784

Magnetron Sputter Blanking Plate 7 Inch

This item was removed from a facility where it was surplus to requirements.

It is in good condition. The plate is missing both O-rings, which appear to have been one rubber and one copper type.

£ 400.00 (ex. VAT) 1 in stock

Unit Instruments UFC-1100A Mass Flow Controller

ITEM-47780

Unit Instruments UFC-1100A Mass Flow Controller

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition, we are unable to test it at our facility.

Specifications:

Model - UFC-1100A
S/N - 9703006102
Max PSI - 500
Range - 10 SCCM
Gas - O2

£ 400.00 (ex. VAT) 1 in stock

Magnetron Sputter Blanking Plate Size - 7 inch

ITEM-47786

Magnetron Sputter Blanking Plate Size - 7 inch

This item was removed from a facility where it was surplus to requirement.

It is in good condition with minimal wear. The plate is missing both O-rings, which appear to have been one rubber and one copper type.

£ 400.00 (ex. VAT) 1 in stock

Intellipower IQ2000V-C-DIAC-Isol-PFC UPS Power Supply

ITEM-55072

Intellipower IQ2000V-C-DIAC-Isol-PFC UPS Power Supply

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

£ 400.00 (ex. VAT) 1 in stock

Polar 850A Toneohm Shorts Locator 230VAC

ITEM-53866

Polar 850A Toneohm Shorts Locator 230VAC

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.