Engineering
Items 101 to 150 of 362
£ 2,000.00 (ex. VAT) 1 in stock
Denford 3-Axis CNC PCB Engraver Lab w/ Proxxon Micromot System IBS/E & Software
ITEM-60595
Denford 3-Axis CNC PCB Engraver Lab w/ Proxxon Micromot System IBS/E & Software
This system was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 2,000.00 (ex. VAT) 1 in stock
Felder FB610 Bandsaw w/ Felder RL 160 Dust Extractor
ITEM-60968
Felder FB610 Bandsaw with Felder RL 160 Dust Extractor
This equipment was removed from a facility where it was surplus to requirements.
The Felder FB610 is an industrial woodworking bandsaw designed for precision cutting of timber and other suitable materials. It is supplied with a Felder RL 160 dust extraction system, designed to collect sawdust and wood particles generated during woodworking operations.
The dust extractor has been powered on and tested and appears to be in working order. However, the yellow warning light marked "<- V < 20 m/s" was illuminated during testing, indicating a possible issue with the airflow velocity.
The bandsaw was reported to be operational prior to removal from the facility. However, it has not been powered on or operationally tested on-site due to machinery testing protocols.
Included in This Lot:
- 1 x Felder FB610 Bandsaw
- 1 x Felder RL 160 Dust Extractor
- 1 x Trolley / Cart designed to fit beneath the dust extractor
- Extensive connecting ductwork and piping for the equipment
£ 2,000.00 (ex. VAT) 1 in stock
Agilent Infiniium 54830B DSO Oscilloscope W/ 2 x Miniature Passive Probes
ITEM-60389
Agilent Infiniium 54830B DSO Oscilloscope w/ 2 x Miniature Passive Probes
This item was removed from a facility where it was surplus to requirements.
The previous owner stated that the unit was in working order.
The oscilloscope powers on successfully. During testing, the most recent recorded self-test was found to date from 2005.
An initial attempt to run the self-test caused the system to display “Not Responding”. The unit was then fully powered down, all accessories were disconnected, and it was left for several minutes before being restarted.
A second self-test was then completed successfully, with all sections passing. Please refer to the images for the test result.
Please note that the internal CMOS battery may be low. The date and time were reset during testing, but after restarting the unit they reverted to 2002.
The unit is supplied with 2 x miniature passive probes.
NEW ITEM
NEW ITEM
£ 1,750.00 (ex. VAT) 1 in stock
Bronkhorst EL-FLOW High Pressure F-221M Mass Flow Controller – Nitrogen
ITEM-58384
Bronkhorst EL-FLOW High Pressure F-221M Mass Flow Controller – Nitrogen
This equipment is being offered on behalf of a client, where it is now surplus to requirements.
The unit comprises a Bronkhorst EL-FLOW High Pressure F-221M mass flow controller configured for nitrogen gas applications.
The Bronkhorst EL-FLOW High Pressure series is designed for precision gas flow control within laboratory and pilot-scale systems operating at elevated pressures.
The unit is supplied unused in its original unopened packaging.
The client has advised they are able to package the equipment for transport if required.
Includes;
- Bronkhorst EL-FLOW High Pressure Mass Flow Controller
- Model: F-221M-RAD-22-W
- Nitrogen configuration
- 55 bar maximum pressure
- NC control valve fitted
- Original unopened box
Please note; No cables are included.
Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.
NEW ITEM
NEW ITEM
£ 1,750.00 (ex. VAT) 1 in stock
Bronkhorst EL-FLOW High Pressure F-221M Mass Flow Controller – Hydrogen
ITEM-58383
Bronkhorst EL-FLOW High Pressure F-221M Mass Flow Controller – Hydrogen
This equipment is being offered on behalf of a client, where it is now surplus to requirements.
The unit comprises a Bronkhorst EL-FLOW High Pressure F-221M mass flow controller configured for hydrogen gas applications.
The Bronkhorst EL-FLOW High Pressure series is designed for precision gas flow control within laboratory and pilot-scale systems operating at elevated pressures.
The unit is supplied unused in its original unopened packaging.
The client has advised they are able to package the equipment for transport if required.
Includes;
- Bronkhorst EL-FLOW High Pressure Mass Flow Controller
- Model: F-221M-RAD-22-W
- Hydrogen configuration
- 100 sccm maximum flow
- 55 bar maximum pressure
- NC control valve fitted
- Original unopened box
Please note; No cables are included.
Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.
£ 1,750.00 (ex. VAT) 1 in stock
Electrolab 10L Glass Bioreactor Vessel with Heating Jacket
ITEM-51382
Electrolab 10L Glass Bioreactor Vessel with Heating Jacket
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and remains untested.
£ 1,750.00 (ex. VAT) 1 in stock
Cussons Miniature Steam Plant P7669
ITEM-57129
Cussons Miniature Steam Plant P7669
This system was removed from a facility where it was surplus to requirements.
The previous owner stated that the unit had been used as part of a teaching laboratory experiment for second-year undergraduate students and identified it as a Cussons Miniature Steam Power Plant, believed to be model P7669R.
It is in good working order.
The unit has an approximate footprint of 600 mm x 600 mm.
£ 1,750.00 (ex. VAT) 1 in stock
Dressler Cesar 136 RF Power Generator
ITEM-55771
Dressler Cesar 136 RF Power Generator
This item was removed from a facility where it was surplus to requirements.
The unit powers on.
No further testing has been carried out by us.
£ 1,700.00 (ex. VAT) 1 in stock
Hewlett Packard 8664A Synthesized Signal Generator
ITEM-53843
Hewlett Packard 8664A Synthesized Signal Generator
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 1,500.00 (ex. VAT) 1 in stock
Beko Bekoblizz BB LC90 AC Compressed Air Chiller
ITEM-48464
Beko Bekoblizz BB LC90 AC Compressed Air Chiller
This item was removed from a university where it was surplus to requirement.
It is in excellent condition and in complete working order.
The previous owner stated it was purchased New and not used, although there is some very light surface damage present. They told us it was bought in error so it has likely seen very light use.
£ 1,500.00 (ex. VAT) 1 in stock
Rondol Stainless Steel Laboratory Feeder Units with Hoppers & Accessories
ITEM-52921
Rondol Stainless Steel Laboratory Feeder Units with Hoppers & Accessories
These items were removed from a facility where they were surplus to requirements.
The lot includes assorted Rondol feeder units and associated stainless steel parts/accessories, as shown in the photos.
The items are in used cosmetic condition with signs of previous use. No testing has been carried out by us.
Included:
- Assorted Rondol feeder units
- Stainless steel hopper/feed components
- Associated fittings/accessories as shown
£ 1,500.00 (ex. VAT) 1 in stock
Mitel Phone System with IP Handsets, Juniper Switches & Accessories
ITEM-55807
Mitel Phone System with IP Handsets, Juniper Switches & Accessories
This system was removed from a facility where it was surplus to requirements.
The system was reported to be working up until it was switched off in January.
Some handsets may require attention, including weak handset hook springs, one handset requiring a wire to be re-soldered, and one operator handset reported as non-working. Not all handsets were in use at the time of decommissioning, and some are understood to be unused/in original boxes.
No further testing has been carried out.
Included:
20x Mitel 5312 IP Handsets
2x Mitel 5330e IP Handsets
2x Mitel 5550 IP Handsets
17x Mitel 5330 IP Handsets
82x Mitel 5304 IP Handsets
1x Mitel 5610 Cordless DECT Handset
4x Juniper EX2200 PoE 48-Port Ethernet Switches
5x Juniper EX2200 PoE 24-Port Ethernet Switches
1x Juniper EX4200 Series Ethernet Switch
1x Mitel IP Conference Saucer
1x Mediatrix 1204
1x BT ASDH NTE 4U/7A
1x Dell Optiplex 990 PC with monitor, keyboard and mouse
£ 1,500.00 (ex. VAT) 1 in stock
Instron 1140 Hardness Testing Machine
ITEM-54626
Instron 1140 Hardness Testing Machine
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 1,500.00 (ex. VAT) 1 in stock
MKS Type 652 Self Tuning Pressure Controller
ITEM-51492
MKS Type 652 Self Tuning Pressure Controller
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 1,500.00 (ex. VAT) 1 in stock
Unimatic Educam 44 Computer Aided Router CNC w/ Isel UFM 500
ITEM-46054
Unimatic Educam 44 Computer Aided Router & Lathe
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in good cosmetic condition.
However, we are unable to conduct further testing at our facility due to the absence of the necessary computer system and software.
The previous client stated it was working when last used, several years ago.
£ 1,500.00 (ex. VAT) 1 in stock
Medezintechnik Medite Fume Adsorber TAZ 19 - Unused Lab
ITEM-47701
Medezintechnik Medite Fume Adsorber TAZ 19 - Unused Lab
This item was removed from a university laboratory where it was surplus to requirements.
It is in excellent condition, still in its original packaging, and the previous owner stated it has not been used since its purchase in 2012.
Includes:
- Unopened PE bag with activated carbon (2.5 kg)
- Metal plate
£ 1,500.00 (ex. VAT) 1 in stock
Agilent Infiniium 54825A Oscilloscope 500 MHz 2 GSa/s
ITEM-53852
Agilent Infiniium 54825A Oscilloscope – 500 MHz, 2 GSa/s
This item was removed from a facility where it was surplus to requirements.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
Accessories are provided in the attached zip pouch, including a keyboard, probes, and additional accessories, along with some booklets and a metal stand.
Please note that the unit is missing two of its feet, with only two present. One of the remaining feet has a broken catch, although it still holds in place and functions.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,500.00 (ex. VAT) 1 in stock
Wadkin Durham CP32 Panel Saw
ITEM-48755
Wadkin Durham CP32 Panel Saw
This item was removed from a facility where it was surplus to requirements.
Please note that a significant portion of the table is missing, and the machine remains untested.
Please note: There is no plug fitted.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,500.00 (ex. VAT) 1 in stock
BOY 22A Injection Moulding Machine - Parts
ITEM-52916
BOY 22A Injection Moulding Machine - Parts
These items were removed from a facility where they were surplus to requirements.
Please note that these components are being sold as parts only. Their individual functionality has not been verified.
The lot includes:
- 1 x Injection Barrel Assembly with injection screw
- Injection screw length: approximately 77.5 cm
- 4 x Barrel Band Heaters
- 2 x Barrel Sections
- 2 x Perforated Cage Lines
- Additional cables and accessories
Please review the images carefully for the exact contents and condition of the lot.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,500.00 (ex. VAT) 1 in stock
PPML CIP System (Stripped) - Tank Skid, Pump & Heat Exchanger
ITEM-53447
PPML CIP System (Stripped) - Tank Skid, Pump & Heat Exchanger
This system was removed from a facility where it was surplus to requirements.
The unit has been stripped for parts by the previous owner and is not functional in its current condition.
The system was previously used for acid washing as part of an older process setup.
Please note that the following components are not included:
- Circuit breakers / switch boards
- Control panel
- Power supply
The remaining system includes components such as the tank, skid, pump and heat exchanger.
The unit would require rebuilding and replacement controls to be returned to service, and is therefore being sold for Spares or Repair.
Please review the images carefully for the overall condition and exact components included.
£ 1,400.00 (ex. VAT) 1 in stock
Unimatic eduCAM GFM4433 CNC Router w/ Isel UFM 500 Lab
ITEM-47413
Unimatic eduCAM 4433 CNC Router
This item was removed from a university laboratory where it was surplus to requirements.
The unit is in good used cosmetic condition, with various marks from general use. The power switch lights up, and the emergency stop button is functional.
Bed size: 90 cm x 37.5 cm
Connection: RS232 cable (attached to unit)
No PC or software is supplied. The router is compatible with various CNC software packages. A free trial of Galaad software is available for download online. These units are supported for use with this software.
£ 1,400.00 (ex. VAT) 1 in stock
Ideal 4850 A Paper Guillotine
ITEM-47276
Ideal 4850 A Guillotine
This item was removed from a university where it was surplus to requirements.
The item powers on and is in a reasonable, used cosmetic condition. It functions as expected, though the blade appears blunt and will likely require sharpening or replacement before use.
Includes:
- Operating manual
- Box of spare parts
Cutting width: 47.5 cm
Model: 4850 A
£ 1,350.00 (ex. VAT) 1 in stock
LeCroy LC574AM 1 GHz Oscilloscope
ITEM-53849
LeCroy LC574AM 1 GHz Oscilloscope
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 1,350.00 (ex. VAT) 1 in stock
Startrite 314H Vertical Bandsaw 152x91x184 cm LxWxH
ITEM-48760
Startrite 314H Vertical Bandsaw 152x91x184 cm LxWxH
This item was removed from a facility where it was surplus to requirements.
The unit is in average used cosmetic condition, with various marks and signs of wear consistent with general workshop use.
The bandsaw features a built-in welder and grinder for producing looped blades.
The machine is currently fitted with a 63A plug and powers up as expected. The main saw runs smoothly, and the grinder also operates correctly. The blade welder has not been tested.
The emergency stop button is fitted and functioning.
Also included are a pair of extra blade guide wheels and a length of blade.
Work Table Dimensions
52 cm x 52 cm
£ 1,350.00 (ex. VAT) 1 in stock
Hamamatsu C9727 High Voltage Power Supply Lab
ITEM-42487
Hamamatsu C9727 High Voltage Power Supply Lab
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition and powers on.
£ 1,250.00 (ex. VAT) 1 in stock
Metaserv Universal Polisher C200/5A 200mm – Single Speed
ITEM-53160
Metaserv Universal Polisher C200/5A 200mm – Single Speed
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Includes;
Polishing Discs:
- 1 x 1 Micon Alumina
- 1 x 14mm SiO2
- 2 x Unknown Polishing Discs
- 2 x Base Plates
£ 1,250.00 (ex. VAT) 1 in stock
ESTA TK 6 Mini Dust Extractor Unit
ITEM-54959
ESTA TK 6 Mini Dust Extractor
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 1,250.00 (ex. VAT) 1 in stock
Jun-Air iQ Dryer Air Compressor OF1202/2XOF1202-90BQ6
ITEM-61023
Jun-Air iQ Dryer Air Compressor OF1202/2XOF1202-90BQ6
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 1,250.00 (ex. VAT) 1 in stock
Keetona Manual Sheet Metal Folder / Sheet Metal Brake with Accessories
ITEM-55824
Keetona Manual Sheet Metal Folding Machine / Sheet Metal Brake
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Additional loose parts/accessories included:
Pair of counterweight/balance arms
Pair of loose side brackets/supports
£ 1,240.00 (ex. VAT) 1 in stock
Jun-Air iQ Dryer Air Compressor OF1202/2XOF1202-90BQ6
ITEM-61022
Jun-Air iQ Dryer Air Compressor OF1202/2XOF1202-90BQ6
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 1,150.00 (ex. VAT) 1 in stock
VDO 014 Tachograph Trainer Tachometer
ITEM-49066
VDO 014 Tachograph Trainer
This item was removed from a university where it was surplus to requirement.
It is in good cosmetic condition and in good working order.
£ 1,010.00 (ex. VAT) 1 in stock
Armfield FEX26-3 GRP Parshall Flume
ITEM-42348
Armfield FEX26-3 GRP Parshall Flume
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
Specifications;
- Model FEX26-3
- Serial No. 031590-001
- Throat width 152mm
- Flow range: 1.5 to 110 litres/second
- 2 x measure scales
- Spirit level fitted
£ 1,005.00 (ex. VAT) 1 in stock
Armfield Type FEX26-3 GRP Parshall Flume
ITEM-42350
Armfield FEX26-3 GRP Parshall Flume
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
Specifications;
- Model FEX26-3
- Serial No. N/A
- Throat width 152mm
- Flow range: 1.5 to 110 litres/second
- 2 x measure scales
- Spirit level fitted
£ 1,000.00 (ex. VAT) 1 in stock
Spenstead Dust Extractor Model LEV4
ITEM-54310
Spenstead Dust Extractor Model LEV4
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
Please note: It was previously hardwired and will therefore require recommissioning.
£ 1,000.00 (ex. VAT) 1 in stock
Hughes & Kimber Etching Press
ITEM-56894
Hughes & Kimber Etching Press
This item was removed from a facility where it was surplus to requirement.
It is in good used cosmetic condition.
£ 1,000.00 (ex. VAT) 1 in stock
Planet-Air Silver-Line Air Compressor Model L-S100-50
ITEM-52975
Planet-Air Silver-Line Air Compressor Model L-S100-50
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 1,000.00 (ex. VAT) 1 in stock
Armfield Model FEX26-3 GRP Parshall Flume
ITEM-42349
Armfield FEX26-3 GRP Parshall Flume
This item was removed from a university lab where it was surplus to requirement.
It is in good cosmetic condition, we are unable to test it further at our facility.
Specifications;
- Model FEX26-3
- Serial No. 031590-002
- Throat width 152mm
- Flow range: 1.5 to 110 litres/second
- 2 x measure scales
- Spirit level fitted
£ 1,000.00 (ex. VAT) 1 in stock
IMER Masonry 700 Masonry Saw 148x81x157 cm
ITEM-52369
IMER Masonry 700 Masonry Saw 148x81x157 cm
This item was removed from a facility where it was surplus to requirement.
It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.
The previous owner stated it was in working order prior to removal.
- Model - Masonry 700
- S/N - 0000634805
- Blade Circumference - 70 cm
Dimensions;
- External length (cm) 148
- External width (cm) 81
- External height (cm) 157
£ 1,000.00 (ex. VAT) 1 in stock
Sartorius Stedim Biotech Std Flexboy Rack 50L FFA 103023
ITEM-47437
Sartorius Stedim Biotech Std Flexboy Rack 50L FFA 103023
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition with minimal signs of use.
£ 1,000.00 (ex. VAT) 1 in stock
Planet-Air Silver-Line Model L-S100-50
ITEM-43050
Planet-Air Silver-Line Compressor Model L-S100-50
This item was removed from a facility where it was surplus to requirement.
It powers on and is in great condition, with no visible signs of wear. The unit was tested to 6 bar and held pressure with no leaks observed. No further testing was performed.
Includes:
- Planet-Air Silver-Line Compressor
- Physical manual
- Thermo Fisher Scientific B-3689-CR (included accessory)
Specifications:
- Max Pressure: 8 bar / 116 psi
- Minimum Operating Temperature: 0°C
- Maximum Operating Temperature: 40°C
- Duty Cycle: S3 – 50%
£ 1,000.00 (ex. VAT) 1 in stock
Lot of Wykeham Farrance Geotechnical Soil Testing/Pressure Cells
ITEM-55762
Lot of Wykeham Farrance Geotechnical Soil Testing/Pressure Cells
These items were removed from a facility where they were surplus to requirements.
They are in reasonably good cosmetic condition with no clear signs of damage
£ 1,000.00 (ex. VAT) 1 in stock
Sedgwick MB 560 PM SM Planer Thicknesser
ITEM-50525
Sedgwick MB 560 PM SM Planer Thicknesser
This item was removed from a facility where it was surplus to requirements.
The machine is in good cosmetic condition and powers on. During inspection it powered up and appears to function correctly.
Please note that the DRIVLOC controls appear to have replaced the original BROOK Motors controls. The emergency stop has been tested and is working.
Dimensions (Approx.):
- External Length: 118 cm
- External Width: 80 cm
- External Height: 110 cm
£ 1,000.00 (ex. VAT) 1 in stock
Pacific Scientific SC750 Servo Drive w/ 2 x R21GMNA Brushless Servomotor
ITEM-56653
Pacific Scientific SC750 Servo Drive w/ 2 x R21GMNA Brushless Servomotor
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and remains untested.
£ 1,000.00 (ex. VAT) 1 in stock
Oxford High-Stability DC Magnet Power Supply
ITEM-56854
Oxford High-Stability DC Magnet Power Supply
This item was removed from a facility where it was surplus to requirement.
It is in good working order.
£ 1,000.00 (ex. VAT) 1 in stock
Young 81000V Ultrasonic Anemometer Red
ITEM-59424
Young 81000V Ultrasonic Anemometer - Red
This item was removed from a facility where it was surplus to requirement.
The unit has not been powered on or function-tested, as the required 12–24 VDC, 110 mA power supply is not included.
The working condition therefore remains unknown.
Please review the images carefully for the overall condition, configuration and exact contents included.
£ 950.00 (ex. VAT) 1 in stock
Retsch Mill/Grinder Centrifugal Mill Model: ZM1
ITEM-58080
Retsch ZM1 Centrifugal Mill / Laboratory Grinder w/ 24-Tooth Rotor & 2.0mm Sieve
This item was removed from a facility where it was surplus to requirements.
The unit is fitted with a 24-tooth rotor and a 2.0 mm particle ring sieve.
The lid is fitted with a safety switch which cuts power to the motor when the lid is loosened. This safety function was tested and found to be working correctly.
The unit has two operating settings, selected using the front switch marked “1” and “2”. Both settings operate successfully, with a noticeable change in motor speed and corresponding movement on the front amperes gauge.
The mill was left running with no load for approximately 20 minutes and showed no issues during testing.
The timer function is also working correctly and switches the motor off when the timer reaches zero.
Please review the images carefully for the overall condition and exact configuration of the unit.
£ 900.00 (ex. VAT) 1 in stock
Loveshaw Little David LD19PT Box Case Taping Machine
ITEM-46231
Loveshaw Little David LD19PT Box Taping Machine
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to conduct further testing.
£ 895.00 (ex. VAT) 1 in stock
ILX Lightwave LDX-3620 Ultra Low Noise Current Source
ITEM-60266
ILX Lightwave LDX-3620 Ultra Low Noise Current Source
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition and powers on, we are unable to test it further at our facility.
£ 850.00 (ex. VAT) 1 in stock
Vaisala Temperature Logger VL-1416-44V with Moxa Nport W2150A Lab
ITEM-42499
Vaisala Temperature Logger VL-1416-44V with Moxa Nport W2150A Wireless Serial Device Server
This item was removed from a university laboratory where it was surplus to requirements.
It powers on and is in great condition with no wear. We are unable to test it further at our facility.
Includes:
- 2 x Vaisala Temperature Logger VL-1416-44V
- Serial No.: 21481031
- Serial No.: 21481029
- Moxa Nport W2150A Wireless Serial Device Server
- Model: W2150A
- Serial No.: N/A
- 7 x Temperature probes with metal casings
- 12V power supply
£ 800.00 (ex. VAT) 1 in stock
Invitrogen ZOOM Dual Power High and Low Voltage Power Supply Model ZP10002 Lab
ITEM-50088
Invitrogen ZOOM Dual Power High and Low Voltage Power Supply Model ZP10002 Lab
This item was removed from a facility where it was surplus to requirement.
It is in good cosmetic condition with some surface damage to the display screen, though this does not affect its functionality.
It powers on, we are unable to test it further at our facility.
Items 101 to 150 of 362