Centrifuges
Items 61 to 80 of 109
£ 445.00 (ex. VAT) 1 in stock
Jouan B4i Benchtop Centrifuge with S40 and AB 2.14 Rotors Lab
ITEM-35762
Jouan B4i Benchtop Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It is in good cosmetic condition with marks from use.
With it are;
Thermo Jouan Centrifuge Rotor AB 2.14
Serial#: 11175641
capacity 24 x 1.5 ml
Max speed 14000 (rpm)
Thermo Jouan High Throughput Swing-Out Rotor with Sealed Buckets and adapters
Model S40
Serial#: 11175610
Max Load 2.00kg
Max speed 4300 (rpm)
Four 200 mL Buckets
Serial#: 11175611
Four 3 x 15ml Adapters
Serial#: N/A
£ 405.00 (ex. VAT) 1 in stock
Beckman Avanti 30 High-Speed Compact Benchtop Centrifuge & Manual Lab
ITEM-17362
This Beckman Avanti 30 High-Speed Compact Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
It is in good cosmetic condition with only minor marks from use.
The unit powers up and refrigerates well. It could not be tested further as there is no rotor.
£ 375.00 (ex. VAT) 1 in stock
ALC PK121 Multispeed Benchtop Centrifuge Lab
ITEM-37031
ALC PK121 Multispeed Benchtop Centrifuge
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
Rotor - T515
SN - 0197/01
Max 4300rpm
Max Load 2.00kg
4 x ALC Buckets P509
4 x ALC Adaptors - R2042 (Cat no. 11172442) Holds 3 x 12-15ml tubes each
£ 345.00 (ex. VAT) 1 in stock
Sorvall RT 6000B Centrifuge w/3600 RPM Rotor - Sorvall H1000B Lab
ITEM-23286
This Sorvall RT 6000B Centrifuge w/3600 RPM Rotor - Sorvall H1000B was removed from a university lab where it was surplus to requirements.
The unit powers up and the rotor runs well up to 3600rpm.
The refrigeration was tested with a digital thermometer (not included).
We set the chamber temperature dial to 4°c and the thermometer dropped to 4.5°c.
We then set the temperature to the minimum of -20°c and it dropped quite quickly to -28°c.
It is in reasonably good cosmetic condition with some marks from use. the rotor has some rust on it
Included with it are;
1 x Rotor - Sorvall H1000B
3600 Max RPM
4 x Du Pont Swinging Buckets (PN - 11053)
2 x Yellow Sorvall Bucket Adapters (00846) 25mm hole diameter.
2 x Blue Sorvall Bucket Adapters (00830) for 50ml tubes.
2 x Black Sorvall Bucket Adapters (00884) for 15ml tubes.
£ 345.00 (ex. VAT) 1 in stock
Gyrozen 416 Benchtop Laboratory Centrifuge with 4000rpm GRS-S-50-4 Rotor Lab
ITEM-23309
Gyrozen 416 Benchtop Laboratory Centrifuge with 4000rpm GRS-S-50-4 Rotor
This was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 4000rpm it is in reasonably good cosmetic condition with some marks from use.
Gyrozen Rotor - GRS-S-50-4
Max rpm 4k
Max rcf 2700xg
4 x GLB-10 Swinging buckets to fit 15ml tubes
Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving before it is shipped, we would be happy to provide this.
£ 345.00 (ex. VAT) 1 in stock
GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor Lab
ITEM-23307
This GLO GT416 Low-Speed Laboratory Centrifuge with GRS-S-50-4 Rotor was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 4000rpm.
It is in reasonably good cosmetic condition with some marks from use.
Rotor - GRS-S-50-4
Max rpm 4k
Max rcf 2700xg
4 x GLB-10 Swinging buckets fits 15ml tubes
£ 325.00 (ex. VAT) 1 in stock
Eppendorf 5810 Benchtop Laboratory Centrifuge Lab
ITEM-30216
This Eppendorf 5810 Benchtop Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.
The unit is in full working order and in great cosmetic condition with minor marks from use.
There is no rotor fitted. It was tested with one from another unit.
£ 315.00 (ex. VAT) 1 in stock
Fisher Scientific accuSpin Micro with 13000rpm Rotor Cat No. 75003245 Lab
ITEM-25990
This Fisher Scientific accuSpin Micro with 13000rpm Rotor was removed from a university lab where it was surplus to requirements.
The unit is in good used cosmetic condition but it does have various signs of general use.
The lid opens, the brake is working and all buttons appear to be responsive. The LCD screen is working and displays clearly.
The unit has been tested up to the max speed of 13,000rpm. It runs smoothly and as it should.
The rotor included is a;
Heraeus Rotor Model #3325B
•F 178953 PP 3/00
• Max Speed 13000 rpm
• Max load 24x4g
24x 2.0 tube flat cap holders
£ 300.00 (ex. VAT) 1 in stock
Hermle Z 400 Benchtop Centrifuge with Rotor Lab
ITEM-37869
This Hermle Z 400 Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 12500rpm.
It is in reasonable cosmetic condition with marks from use.
£ 295.00 (ex. VAT) 1 in stock
Hermle - Labortechnik Refrigerated Centrifuge Z 233 MK & 14000RPM Rotor Lab
ITEM-24517
This Hermle - Labortechnik Refrigerated Centrifuge Z 233 MK & 14000RPM Rotor was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 14000rpm. It was tested with a digital thermometer (not included). The temperature was set to -10˚c which it dropped to after running for 14 minutes (The thermometer read -15˚c).
It is in reasonably good cosmetic condition with marks from use.
It comes fitted with;
Hermle Rotor
220.88 V04
44 x 2ml tube slots
14000rpm Max
£ 285.00 (ex. VAT) 1 in stock
Eppendorf 5417C Benchtop Centrifuge with Aerosoltight GE 035 11/01 Rotor Lab
ITEM-30269
This Eppendorf 5417C Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 20,800rpm but is a little loud at max speed.
It is in reasonably good cosmetic condition but has a small crack on the bottom left of the unit.
It is fitted with an Eppendorf Aerosoltight GE 035 11/01 Rotor which holds 30 x 2ml tubes
£ 275.00 (ex. VAT) 1 in stock
Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge with Rotor Lab
ITEM-25267
This Thermo Electron Corporation Labofuge 300 Heraeus Centrifuge was removed from a university lab where it was surplus to requirements.
The item powers on and is in working order with the speed running up to 4000rpm.
The item is in a reasonable, used cosmetic condition.
It is fitted with a Fanem Rotor with 8 x 15ml Yellow buckets
£ 265.00 (ex. VAT) 1 in stock
ALC Refrigerated Centrifuge Model - PK120R with T534 4300rpm Rotor Lab
ITEM-25269
This ALC Refrigerated Centrifuge Model - PK120R with T534 4300rpm Rotor was removed from a university lab where it was surplus to requirements.
The unit powers up and was run up to 4100rpm smoothly.
The refrigeration was tested with a digital thermometer (not included).
The temperature was set to 4°C. It quickly dropped down but stopped at 3°c while the thermometer was reading 4°c.
Finally, the temperature was set to the minimum temperature of -10°c which it dropped to after running for 20 minutes.
It is in reasonably good cosmetic condition with some marks from use.
ALC Refrigerated Centrifuge
Model - PK120R
Cat no. 11200031
Inside the centrifuge:-
ALC Rotor no. T534
Max rpm 4300
Max load 2kg
4 x ALC Buckets P509 with white 50ml inserts
£ 260.00 (ex. VAT) 1 in stock
Sanyo MSE Refrigerated Centrifuge Model - Hawk 15/05 with 15000rpm Rotor Lab
ITEM-24558
This Sanyo MSE Refrigerated Centrifuge Model - Hawk 15/05 with 15000rpm Rotor was removed from a university lab where it was surplus to requirements.
The unit powers up and runs smoothly up to 15000rpm. It was tested with a digital thermometer (not included). The lab confirmed it was fully working prior to removal.
The temperature was set to cool down to the minimum of -9˚c and it took around 15 minutes to drop, the thermometer read -10˚c.
It is in good cosmetic condition with minor marks from use. The lab informed us that it was fully functional.
The rotor holds 26 X 2ML Tubes
There is a manual included.
£ 255.00 (ex. VAT) 1 in stock
Labnet Spectrafuge 24D Benchtop Laboratory Centrifuge with Rotor Lab
ITEM-36076
Labnet Spectrafuge 24D Benchtop Laboratory Centrifuge with Rotor
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order to 13,300rpm, but does whistle at higher speeds.
It is in good cosmetic condition with marks from use.
Model#: 24D
Cat#: C2400-T-230
Serial#: D 607625
The rotor holds 24 x 1.5/2ml tubes.
£ 250.00 (ex. VAT) 1 in stock
Jouan A-14 Benchtop Centrifuge with 14,000 rpm Rotor
ITEM-38765
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in good cosmetic condition with minor marks.
Included with it;
Jouan 14,000 rpm rotor with push-on lid
Accepts 20 x 1.5/2 ml tubes
Max charge 52kg at 14000 rpm
£ 250.00 (ex. VAT) 1 in stock
Sigma Benchtop Laboratory Centrifuge Model 1-15 with Rotor 12124 Lab
ITEM-38764
Sigma Benchtop Laboratory Centrifuge Model 1-15 with Rotor 12124
This was removed from a university lab where it was surplus to requirements.
The unit powers up and runs up to 14000rpm. It is in good working order.
It is in good cosmetic condition with minor marks.
Includes a 14,000 rpm Sigma 12124 rotor with 24 cavities for 11mm tubes max load 24 x 5g
£ 215.00 (ex. VAT) 1 in stock
ALC PK121R Refrigerated Benchtop Centrifuge With Rotor
ITEM-09597
This unit was removed from a lab as surplus to requirements. It was tested to 4100rpm (max of rotor) and 4degrees with no problems.
Unit appears to be in excellent working order.
£ 205.00 (ex. VAT) 1 in stock
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Accessories Lab
ITEM-36097
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Accessories
This was removed from a university lab where it was surplus to requirements
The unit was tested at 2800 rpm at 50 Hz, and 3500 rpm at 60 Hz. It ran at both speeds without an issue.
Itt comes with a choice of interchangeable rotors for different microtube sizes/combinations 0.5/0.2/1.5
It is in excellent cosmetic condition.
Item also includes:
Protein LoBind Tube 0.5mL X2
100 Safe-Lock Tubes
Cat#: 022431064
DNA LoBind Tube 0.5mL
500 Safe-Lock Tubes
Cat#: 0030 108 400
DNA LoBind Tube 1.5mL
250 Safe-Lock Tubes
Cat#: 022431021
£ 205.00 (ex. VAT) 1 in stock
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes Lab
ITEM-36134
Grant-Bio Combi-Spin PCV-2400 Centrifuge & Tubes
This was removed from a university lab where it was surplus to requirements
The unit was tested at 2800 rpm at 50 Hz, and 3500 rpm at 60 Hz. It ran at both speeds without an issue.
Itt comes with a choice of interchangeable rotors for different microtube sizes/combinations 0.5/0.2/1.5
It is in excellent cosmetic condition.
Item also includes:
2 x Protein LoBind Tube 0.5mL
100 Safe-Lock Tubes
Cat#: 022431064
DNA LoBind Tube 0.5mL
500 Safe-Lock Tubes
Cat#: 0030 108 400
DNA LoBind Tube 1.5mL
250 Safe-Lock Tubes
Cat#: 022431021
Items 61 to 80 of 109